Cable length limit on the so-called "Internet" port?

Is there a limit on the cable-length when connecting an Ethernet cable to the so-called "Internet" port on a WRT54G router?
I assume this is a standard 10/100 Ethernet port, since I am connecting this to the Ethernet port of my DSL modem. Since the Ethernet standard defines a maximum cable-length of 100 meters when connecting any 2 Ethernet devices, I should be able to use a cable up to this length when connecting 2 Linksys routers together.
Here is what I want to do:
DSL Modem-->Linksys Router-->Linksys Router
My first Linksys WRT54G router is connected to a DSL modem. I want to put a second WRT54G Linksys router in a different building, and connect them with a 100 meter Ethernet cable, connecting the remote end to the second router´s "Internet" port, and the other end into one of the first router´s available 10/100 ports. This will allow me to create 2 wireless signals, with 2 different DHCP scopes and 2 different SSID´s, basically allowing me to extend the range, with the 2 routers connected with a physical wire.
This works when connecting them with a short, 2 meter cable. Using a short cable I am able to associate with the second router´s SSID, get a DHCP address from that router, and then turn on RIP on both routers and have traffic route from the second router to the first one and out to the Internet successfully.
However, when I replace the short cable with a longer one, either 80 meters or 100 meters, I don´t get a link light between the routers. I do get a link light if I connect to a 10/100 port on both routers, but RIP doesn´t seem to want to exchange routes on the second router out anything other than the "Internet" port. Moving the cable back to the "Internet" port fails to produce a link light (unless I use a really short cable, which does produce a link light).
So my question is this: from a Layer-1 perspective, is the "Internet" port an Ethernet port that enforces a cable-length limit that doesn`t follow the standard 100 meter rule?
--- Christer

well..the internet port is definitely an ethernet port...however, it is not supposed to limit the cable length .. try a 50 m cable and check whether it works...because my friend had a similar kind of an issue and it worked fine with a 50 m ethernet cable ..

Similar Messages

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • How to increase the length limit of the text area ...

    It's 2011 and I wanna send email through my phone. Hope that Nokia wake up and catch up with the present time. Looks like this  phone hopes me to be content with 552 or so characters at a time. The characters just don't get entered after that limit. Is there a way to construct a longer message? Thanks in advance.
    MODERATOR'S NOTE: This post has been edited. Inappropriate use of words are not allowed in this forum.

    You state it's 2011 and they should catch up yet you buy a phone that was released in 2008?
    Are you using the latest version of the nokia email software? Is your firmware up to date?
    Perhaps you should rephrase your posts on this forum if you want anybody to put any serious effort into helping you. Edit - Looks like a moderator has rephrased it for you! 

  • ExternalInterface.call String parameter length limit???

    Is there a String length limit to the amount of chars a
    String can contain when passed as a parameter to
    ExternalInterface.call()?
    Also, are there any chars that ExternalInterface.call()
    cannot serialize in a string?? Like \n, \t ...etc.
    The livedocs don't answer these questions.

    thanks for your reply but i just figured it out.
    ExternalInterface.call("jsFunc", longString);
    There is seems to be no char limit that i came across cause i
    was able to shove 2K in there.
    The problem is the newlines in the string, they must get
    messed up during serialization. Just make sure you clean the string
    of newlines like so:
    longString = longString.split("\r").join("
    ").split("\n").join(" ");
    ExternalInterface.call("jsFunc", longString);
    works fine......

  • Maximum firewire cable length?

    Hi there,
    Why do firewire cables come at a 6 foot limit? I have a joiner and am able to run my firewire audio device from twice that distance. Will this cause harm?
    thanks,
    rwa

    I guess it should still work: the reason for the cable length limit is probably that the data transfers slightly more slowly when your FireWire cable is longer than six feet.

  • Maximum cable lengths for USB / FW / DVI & sVGA?

    I've hunted around on the net and can't find any kind of definitive answer regarding maximum cable lengths for USB, Firewire 400/800 and DVI / sVGA monitors. Can anyone shed some light?
    I'm about to shift my studio into a new room, and have the oppourtunity to stick my G5 and external drives into a corridor cupboard adjacent to where my studio is - in other words, noise free bliss! But....
    ...if I map out how far my computer monitors, keyboard and audio interface will be from the cupboard, and take into account the twists and turns involved in neat routing, I'm looking at a distance of about 10 meters. I need to know if any of these devices will be OK with such a long run of cable, and if not, if it's possible to achieve a good result using hubs or repeaters?
    So, can anyone help me out with info on:
    an Apogee Ensemble (Firewire 400)
    an Apple keyboard (USB 2.0)
    an LCD flatscreen (DVI)
    and another LCD flatscreen (sVGA)
    Many thanks!

    I was just researching the very same thing, though it does not  sound like my studio setup will be as sweet as yours. Here are a few things I ran across:
    FIREWIRE-
    "The maximum cable length specified by the IEEE1394 standard is 4.5 meters. However, more recent tests have shown that certain high quality firewire cables can achieve longer lengths without significantly affecting transmission quality. Several manufacturers sell firewire cables longer than 5 meters (some up to 50 meters)."
    ~http://www.focusrite.com/answerbase/article.php?id=206
    I found an example of a company who claims to sell a firewire cable of that length:
    http://www.expansys.com/pf.aspx?i=102956
    USB-
    There is forum discussion on the topic I was reading yesterday:
    http://www.everythingusb.com/forums/showthread.php?threadid=804
    But don't go past the 11th post or so, they go off on another subject... the use of hubs & the words "active extension" in that post caught my eye. A quick google search came up with this site:
    http://www.everythingusb.com/forums/showthread.php?threadid=804
    There were a bunch sites with devices claiming to do this.
    Finally I have this chart, which seems to support what what the articles say, without of course any other extension technology/solutions:
    http://www.extron.com/company/article.aspx?id=dedigform10
    I'm not making any claims at all about how true these sources are, I just have the same questions and decided to toss what I've been looking at into the discussion. Feel free anyone to jump in and tell me its all wrong - I'd love to hear whats right.
    ~sam

  • Cisco/Linksys WRVS4400N email address length limit

    I have noticed that when I try and enter in an e-mail address for alert logs that I am unable to using the web form provided as there is a length limit.
    The only way I have managed to get around this is to use the firefox plugin tamper data - https://addons.mozilla.org/en-us/firefox/addon/tamper-data/
    I am using the latest firmware:
    V2.0.0.8-ETSI
    Are there any other solutions/updates/fixes available?

    Hi Mark, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. I apologize for this but I don´t understand your problem. If you could give us more details that going to be really helpful in order to help you.
    Greetings,
    Johnnatan Rodriguez Miranda.
    Cisco Network Support Engineer.

  • I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    LOL!!
    I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
    Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
    Do a search on ebay.. 3g router.
    But you can get the TC to join a wireless network.
    It is a non-standard setup that Apple will not support.. the option is hidden.
    If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
    But please note the end result of this setup..
    very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
    In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this.

  • I got problem when trying to contact my iphone 4 using facetime,it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.

    i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

    i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

  • Maximum limit of total length of all the characters for a custom OM infotyp

    Hi,
    Can anyone let me know whats the maximum limit of total character length for a OM infotype.
    I need to create an OM infotype using PPCI Tcode.
    When I am defining the HRI Structure....when total length of all the field is exceeding 900 I am unable to create infotype....I want to confirm whether it is some configuration problem or whether max limit set by SAP is 900 ?

    Hi,
    The max length of infoobject is 60
    for more info
    Re: Creating OM infotype
    /people/sap.user72/blog/2006/05/27/long-texts-in-sap-bw-modeling
    Thanks!
    Edited by: M Prasanth on Jan 19, 2009 1:01 PM

  • I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.

    I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.

  • Can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

    can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

    Hi, Alan -
    How can I connect to both printer (HP 4050n, via direct connection) and internet (via LAN), as my iMac has only one R45 port?
    You can, but you'll need to expand your cabling a bit.
    You'll need to get an intermediate ethernet hub, switch, or router. That device sits alone, with the Mac, your printer, and your modem/LAN plugged into it.
    If you are already using a router, either separate or in combination with the modem (many modems have a built-in router), then you just need a hub or switch.
    I use an ethernet switch (10/100/1000) to let both my Macs (a 2010 iMac and an elderly G4 DA model) use my HP4000n printer and my modem. The ethernet switch is a passive device, meaning there's no setup nor instructing it required - it's truly plug-and-play. All four items (two Macs, printer, and modem) are plugged into it via ethernet; both Macs have full-time independent access to the printer and the modem.

  • What can be the max difference in cable lengths that we can have between the ISLs in a port-channel between MDS switches?

    Hello All
    What can be the max difference in cable lengths that we can have between the ISLs in a port-channel between MDS switches? Do we have any documentation?
    Thanks
    Chetan

     competitive solution instead recommends a distance variance of 30 meters or less among ISLs within a trunk. If the distance variance is greater than 30 meters, undesired and degraded performance will occur. For example, if a trunk has a distance of 100 kilometers, the competitive trunking solution allows a cable length variance of only 0.03 percent!
    ref;
    http://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9500-series-multilayer-directors/white_paper_c11-534878.html
    hth
    regards
    inayath
    **********PLZ dont forget to rate if this info is helpfull.

  • What is the max. cable length that the Differential TTL signals can run in both at high and low frequencies?

    Hello,
                I want to now the max. cable length that the Differential TTL signals can run in both at high and low frequencies.

    That is very dependant on the type of cable, its construction, and inherent impedance and capacitance. This may be of use:
    http://beiied.com/PDFs2/SSI_14-15-bit-encoder_addendum.pdf
    -AK2DM
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

  • Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

    Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

    Solution may be found if you search in the "More Like This" section over in the right column. 

Maybe you are looking for

  • AR aging report (summary by customer)

    Hi Experts, I would like to ask if how to create an aging report showing only the: 1. Customer 2. Credit Limit 3. Payment Term 4. Total AR 5. Due 0-30 6. Due 31-60 7. Due 61-90 8. Not Due Hopefully the balance should be the same as with FBL5N. We hav

  • Mute button is not working on my iPhone 4 after updating to IOS7

    Hi, Mute/Silent button is not working on my iPhone 4 after updating to IOS7. When I make my phone silent using that sliding button on the side, the phone toggles between mute/unmute position automatically and settles in unmue position. Then it will c

  • Burn podcast to DVD

    Can you copy a podcast to a dvd disc so that you can watch from the TV as it is being played from a dvd player instead of watching it only from your computer?

  • IDOC issue URGENT

    Hi guys... Sorry, I'm not sure where to post my IDOC questions...So I post it here and hope to get some opinion from u all... Upon intercompany billing process is perform IDOC document should be generated to create posting in AP10. But now this is no

  • How do I create banks for 3 looptracks...

    Hey, i'm new in mainstage, as far as looping goes... i know how you set up one loop'station' and set your midi knobs to play and record and so on but I want to have 3 loops going at the same time. But I want the knobs to be on diffirent banks... how