Cable Modem to Airport Express via USB

I have a cable modem which has the option of using ethernet or USB for network connections. Can I connect the USB output from my cable modem to the USB of the Airport Express for transferring of the internet connection?
Message was edited by: Michael710

Can I connect the USB output from my cable modem to the USB of the Airport Express for transferring of the internet connection?
No. The AirPort Express's USB port can only be used with a printer. Nothing else will be recognized.
(42502)

Similar Messages

  • Vonage between cable modem and Airport Express is a problem

    I have my Comcast cable modem connected via Ethernet to the Vonage box which is connected via Ethernet cable to my Airport Express. When I try to connect wirelessly via my Powerbook it's a crapshoot whether or not I can connect to the internet. Mostly the quality is very poor if you can connect at all. If I cut the Vonage out of the equation hooking the cable modem to the Airport Express it works perfect. So Vonage is my problem and I need to change some settings either with my computer or my Airport Express, but which ones? I've been given several different ideas from the information I've sifted through (i.e. change the DNS, change the sharing prefs, get a hard wired router). Oddly enough an old HP computer I have in the basement connected to the internet via another Airport Express has no problems with connection at all. If someone could let me know which of these fixes I am preparing to try would work the best I would appreciate it.

    Interesting. So you have two Airport Express devices configured into a WDS, with the one upstairs functioning as the main base station and the one downstairs functioning as a remote base station. And your PC downstairs connected to the remote base station has no problems connecting to the internet. Is that PC cabled to the Airport Express, or does it connect wirelessly to the remote Airport Express?
    What happens if you bring the Powerbook downstairs to where the PC now resides. Does the Powerbook then get the same great internet connection as the PC?

  • Airport Express via Netgear Router

    I am trying to connect to my cable broadband using Airport Express via a Netgear ADSL wired router (DG834v2). Airport is connecting but for some reason the signal is not coming through. The connection works fine through Airport by itself but not through the router.
    I have been through the Sharing settings on my Mac but without any luck, partly because I don't know what the settings are.
    I have tried setting up the router through Netgears site but it cannot find an internet connection.
    Can anyone help? Superman?

    Try this.
    Blank your cable modem by turning it off and leaving for 30 minutes (or even overnight).
    On the Netgear configuration screen.
    Basic Settings
    Does Your Internet Connection Require A Login?
    Check No
    Enable NAT
    Configure the Airport Express to not distribute IP addresses.
    iFelix

  • Connecting wireless modem and airport express

    I currently run internet with an old Motoirola Sideboard cable modem and Airport Express - previous version. All runs well. Now my Optus provider has upgraded my service with a Premium account for higher speed. They have also given me a free wi fi Cisco modem - DPQ3925. How can I replace my old Motorola modem and still maintain Air play etc with my new modem using Airport Express. I need to know exactly wire per wire help - please, if possible - Thanks
    Mac

    Hi - I have a similar issue.
    I have a new macbook pro, ATV (3rd Gen) and AXn (purely for Airplay of itunes).
    All three are wirelessly connected to my HG556a Huawei WiFi Router.
    The Macbook pro and ATV work fine and can see each other for airplay mirroring and itunes.
    The AX connects and comes up in Airport Utility (AU) and itunes shortly after you turn it on, but if you either dont use it or stop using it and switch to ATV or whatever it dissapears from itunes and AU says it cant find it. Randomly the light on the AX stays green the whole time.
    I have to switch the AX off and on to get it back working again (i.e. itunes and AU can see it).
    Following other forum posts I've set the AX up by hard connecting it to my router, setting a static iP and reserving ports 5353 and 3689 to that address. I've also turned off ipv6 or whatever using the networksettings Terminal code string. I have also repaired permissions with disk utility!
    It still dissapears from available options in iTunes and AU. ideas?

  • Connecting aiport extreme and airport express via ethernet cable ?

    Is it possible to connect an airport extreme to an airport express via ethernet cable, I ask because I want to expand the range of my wifi network to the basement of my house, the floors are really thick concrete so I installed some ethernet cable runs, I hope somebody can help me, thank you.

    +How do I do it ? Do I connect the modem to the airport extreme and then run the ethernet cable from one of the extreme's ethernet ports to the express ethernet on the basememt and a second cable from another of the extreme's ethernet connectors to the express on the second floor+
    Yes, this is exactly correct.
    To configure each AirPort Express (AX)
    Open AirPort Utility, click Manual Setup
    Click the Base Station tab below the icons to name your device, assign a device password and adjust time zone settings. Give each Express a separate name so you can identify then easily.
    Click the Wireless tab
    Wireless Mode...Create a Wireless Network
    Wireless Network Name...Exact same name as your AirPort Extreme network
    Radio Mode 802.11n (802.11b/g compatible) if you want to use 2.4 GHz
    Channel...Automatic
    Wireless Security...Exact same setting as your AirPort Extreme network
    Wireless Password....Exact same setting as your AirPort Extreme network
    Click the Internet icon
    Change the Connection Sharing setting at the bottom to "Off (Bridge Mode)"
    Click Update at the lower right and the AirPort Express will restart in 20-30 seconds
    I think it is easier to configure each AirPort Express with AirPort Utility by temporarily connecting it to your computer with a short ethernet cable. Once you have saved the configuration, you can move the Express to the location that you need.
    Please post back on your progress.

  • Connecting to Airport Express via Ethernet Cable

    Dear Apple Support Community,
    My setup at home is such that all my devices are in such close proximity to the Airport Express, and therefore I connect everything to the Airport Express via ethernet cables (NAS, Apple TV, PS 3).
    The final step in my network setup would be to connect my Macbook to the Airport Express to connect to the internet using the Ethernet Cables, instead of using the wireless connection - because my Macbook is positioned right next to the Airport Express.
    However, I am struggling to get the Macbook to connect to the Internet via the Ethernet Cable through the airport express. Is there a special way to set this up if this can be done. I know Wireless would be the answer, but the problem is, when I download movies etc, I write the files directly onto the NAS which happens a lot quicker than doing so via WiFi.
    I hope the above question makes sense.
    Thanks in advance for any feedback.
    Regards
    ST

    Hello Brian Hunt1. Welcome to the Apple Discussions!
    I have an old PowerBook G3 and I do not have a wireless card for it. My plan was to connect it, via Ethernet cable to my airport express which is on my home wireless network (DSL to Mac Mini to AirPort Express via built-in AirPort).
    Unfortunately, the network configuration your describing, where you would use OS X's Internet Sharing feature to share the Mac Mini's wired Internet connection wirelessly with the AirPort Express Base Station (AX), won't work.
    If I cannot connect my laptop this way, could anyone suggest a wireless card that is compatible with this slightly antiquated, yet very useful machine?
    Only the "Pismo" PowerBook G3 is capable of using the original AirPort card. If you have this model, then the following DIY instructions will show you how to install it.
    If this isn't your model, then check out the following vendor offerings:
    o QuickerTek
    o hField Technologies' Wi-Fire

  • Connecting a Laptop to Airport Express via Ethernet Cable

    I have an old PowerBook G3 and I do not have a wireless card for it. My plan was to connect it, via Ethernet cable to my airport express which is on my home wireless network (DSL to Mac Mini to AirPort Express via built-in AirPort).
    My question is can I make this work? After buying the Ethernet cord, all my reading of the AirPort Express manual seems to suggest that the Ethernet port on the AirPort Express is to only be used as an input port, not as an output. Is this correct?
    If I cannot connect my laptop this way, could anyone suggest a wireless card that is compatible with this slightly antiquated, yet very useful machine?

    Hello Brian Hunt1. Welcome to the Apple Discussions!
    I have an old PowerBook G3 and I do not have a wireless card for it. My plan was to connect it, via Ethernet cable to my airport express which is on my home wireless network (DSL to Mac Mini to AirPort Express via built-in AirPort).
    Unfortunately, the network configuration your describing, where you would use OS X's Internet Sharing feature to share the Mac Mini's wired Internet connection wirelessly with the AirPort Express Base Station (AX), won't work.
    If I cannot connect my laptop this way, could anyone suggest a wireless card that is compatible with this slightly antiquated, yet very useful machine?
    Only the "Pismo" PowerBook G3 is capable of using the original AirPort card. If you have this model, then the following DIY instructions will show you how to install it.
    If this isn't your model, then check out the following vendor offerings:
    o QuickerTek
    o hField Technologies' Wi-Fire

  • Belkin wireless modem and Airport Express lan problems

    Let me preface my problem by stating the obvious - I'm not very technically proficient!
    That said, I've had an AirPort Express wireless lan connecting three computers on my home/office network for the past 8 months without any problems at all. All machines on the network have been able to access the internet via a Thomson SpeedTouch 530 ADSL1 modem that connects via an ethernet cable to the AirPort Express. No problems.
    The network consists of my G5 iMac (ALS), my husband's Mac mini and my Sony VAIO laptop (XP Pro SP2).
    I should also mention that half-way between my office and my husband's office there is a second AirPort Express that 'boosts' the signal to his office.
    I recently changed ISPs to a provider that offers the faster ADSL2+ service. This meant that I had to get a new Belkin ADSL2+ modem. This is my problem. I cannot connect my AirPort Express network to the internet using the Belkin modem. The Belkin modem connects without any problem if I just have it connected via ethernet to my iMac but that's not what I want to do.
    My existing AirPort details are -
    IPv4 Address: 10.0.1.3
    Router 10.0.1.1 (this is the SpeedTouch 530 modem)
    Subnet Mask 255.255.255.0
    I thought I could change the new modem's address(?terminology?) from 10.1.1.1 (which is how it came) to 10.0.1.3 and that everything would work but it doesn't.
    Belkin tech support said 'the problem is with your AirPort Express' (what else would they say)?
    Do I have to keep the 10.1.1.1 and change my AirPort addresses? Or should I try to set up a new network?
    2GHz 20-inch iMac G5 (ALS)   Mac OS X (10.4.4)   Mac Mini; 12inch PowerBook; 120GB external firewire hd; Video iPod; iPod mini;

    No ideas?

  • Using TimeCapsule with a Comcast modem AND Airport Express. Way slower after updates! What's up?

    I've been running this set up for two years now without a hitch.  Comcast Modem to TimeCapsule by Ethernet.  Then TimeCapsule to Airport Express via WiFi.  It used to work great because my TC was far away from my family room and the AE extended my network flawlessly. 
    After Mavericks and IOS 7.06 installations on my devices (iMac, Macbook Air,  iPhone, and iPad) my wifi seems to be moving at half speed.  I've rebooted the Comcast Modem and  TimeCapsule. I guess I should reboot airport express as well.  But I doubt thats the problem.  I was thinking of asking Comcast to change out Modems but this is a new problem only since updates. What should I do?
    Any ideas?
    Thanks
    Marylyn

    Power off the entire network.....all devices....computers, printers, modem, TC, mobile devices, etc
    Wait a few minutes
    Start the modem first, and let it run a few minutes by itself
    Start the TC next and let it run a full minute
    Keep starting devices one a time about a minute apart until the entire network is powered back up
    Check the network

  • Trying to connect my wired PC to the wireless airport express via the wireless router.

    Trying to connect my wired PC to the wireless airport express via the wireless router.  TP-link wired/wireless router.  Ultimate goal is to send music from iTunes on PC to wireless router, then to airport, then to reciever.  The amber light is blinking.  Thanks in advance for the help!

    If I'm understanding right your need and your computer has wired access to your network/router, all you have to do is give your AX wireless or wired access to your network too.
    Wired should be easier.  Just use a network cable to connect to the router.  Power up the AX and look for it on AirPort Utility, do so without changing any of your computer settings.  If it's visible, then on iTunes your AX should be visible on the AirPlay icon at the bottom-right corner.
    If you want to connect your AX to your router wirelessly I would suggest to reset your AX settings by pressing and holding for a few secs the reset button next to all the ports.  Once it is reset, using your computer try to look for the wireless network it'll be creating, it should be something like Apple Network 4341eb.  Join that network and, using the AirPort Utility, configure your AX as a network client.  Go to Wireless > Wireless Mode: Join a wireless network.
    Select your router wireless network from the drop-down menu, select the appropriate security and type in your password.  Click update.
    It'll restart and automatically join your network.  Have your computer join back your router network and, again, in iTunes bottom right you should be able to see the AX speakers.
    Let me know if this worked.
    Jorge...

  • How to add Airport Express and USB 2?

    Hello all,
    I have a Titanium 1ghz that currently has no Airport. I'd like to add Airport Express and USB 2. I know I can do both via the PCMCIA slot, but only one at a time.
    (Before you say: Just add USB 2 via the slot, and then add a WiFi dongle via the new USB -- I need to use the Airport for Internet Sharing (the PB is going to be a slim little server/Airport hub), and I've never seen anyone (including me) succeed at getting an internet connection shared via a dongle.)
    FWIW, the main reason I need the USB 2 is to connect a pair of external hard drives. If I could connect the USB drives via the Firewire ports, I'd be all set. Are there adapters that would let me do this?
    Thoughts? They're much appreciated.
    SJ

    FWIW, the main reason I need the USB 2 is to connect a pair of external hard drives. If I could connect the USB drives via the Firewire ports, I'd be all set. Are there adapters that would let me do this?
    No, there aren't. But it would be simple enough to replace your USB-only external drive enclosures with enclosures that have FireWire ports. Just swap the drive mechanisms themselves into the new enclosures. FireWire would give you better speed than USB2, and if your enclosures have two FW ports (say, one FW 400 and one FW 800) and their own power supplies, then you could daisy-chain both drives on the Tibook's single FW port.
    Of course if you can get by without having the two drives connected at the *same time* as you're using the wifi connection, then a USB2 PC Card and a wifi PC Card (like this one) will serve you just fine.

  • Connecting Two Airport Express Via Ethernet

    I have a unique situation in which I would like to connect two airport express via ethernet. Here is the situation: I can connect the first AX directly to the internet and set up a WDS for the second AX. Unfortunately, the second AX signal does not reach where I need it to go. I can run an ethernet cable between the two. Is this setting valid for a WDS? Or does the WDS have to be wireless? If I can set up the WDS using an ethernet, will the relay AX broadcast the internet wirelessly then?
    Are there any specific settings I should know about?
    Any help would be great.
    Thanks in advance,
    Debbie

    I currently have an old snow basestation at this location. Can I plug an ethernet cable into it and connect it to the AX?
    Yes that will work.
    My understanding was that the older basestation could not do this?
    I think you have it confused with extending a network wirelessly. That is not possible with the snow AirPort base station (ABS).

  • IMac Model 10,1 cannot connect to Internet, either with cable modem of Airport. Solutions?

    iMac 10,1 cannot connect to internet via cable modem or Airport plugged into cable modem.  MacBook Pro, iPad and iPod are fine.  Reinstalled OS10.6.3with no results.  Ideas on where to go next welcome.

    Hello,
    Though all of these steps may or may not be needed, I'm including them all.
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).

  • HT1515 I'm getting poor performance from my apple TV, will plugging in my airport express via ethernet to apple tv increase its performance (poor wi-fi signal)

    I'm getting poor performance from my apple TV, will plugging in my airport express via ethernet to apple tv increase its performance (poor wi-fi signal)

    Yes, though it is less ideal than what I suggested earlier. You would need to place your AirPort Express in a location approximately midway between your AirPort Extreme Base Station and the TV. Then, using AirPort Utility, configure it to "extend a wireless network".
    It may help. Bear in mind the signal thus "extended" by the Express can only be as good as the signal it can receive from the Extreme. That is the reason for selecting its appoximate midway location.
    Read about it here: http://support.apple.com/kb/HT4145
    Scroll down to "Wirelessly Extended Network (802.11n)" for a picture.
    This solution requires an all-Apple wireless network. No third party stuff.
    You mentioned using Ethernet. That would be a better idea. Scroll down to "Roaming Network (Ethernet-connected Wi-Fi base stations)" for a picture. In your case, the longer the Ethernet cable - hence the closer you can move the Express to the TV - the better

  • I have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. unility says it has found a new base station

    i have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. utility says it has found a new base station and asks if i want to use it. if i click yes, then the old setup is disabled.

    Ok, thanks for clarifying which models you have. Please see the following Apple Support article on how to configure these older base stations for a Wireless Distribution System (WDS).

Maybe you are looking for