Cable .. soundblaster -- soundblaster live .. is there anybody, who would give me his cabl

Hallo
Unfortunately my AUD_EXT cable is destroyed and I don't know where to buy a new one
Is there anybody who has a damaged li've dri've and don't needs the AUD_EXT cable anymore
When there is anybody, please contact me. I need this cable ...
Thank you

click here and scroll toward the bottom:
Contact Us | Verizon Wireless
You also could file a Notice of Dispute:
http://www.verizonwireless.com/support/pdf/Notice_of_Dispute.pdf

Similar Messages

  • Hello is there anybody who can help me in german? i have the same problem like the guy with i tunes. it won´t open an give me an error "An application has made an attempt to load the C runtimelibrary incorrectly" Please contact the application´s support..

    I´ve so many privat things on I tunes like pictures, music etc.and i won´t loose them. is there anybody who can help me to save my private things and help me to solve teh problem
    Thanks you for help greetings from austria

    I just had the same error: 
    R6034
    An application has made an attempt to load the C runtime library incorrectly.  Please contact the apps support team for more info.
    I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says.  I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
    Good luck!

  • I CANNOT ACTIVATE MY ILLUSTRATOR  AFTER FIXING MY COMPUTER. IT SAIS THAT I AM NOT CONNECTED TO INTERNET BUT I AM. IS THERE ANYBODY WHO CAN HELP.

    I CANNOT ACTIVATE MY ILLUSTRATOR  AFTER FIXING MY COMPUTER. IT SAIS THAT I AM NOT CONNECTED TO INTERNET BUT I AM. IS THERE ANYBODY WHO CAN HELP.

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • I got my ipad this afternoon, and it suddenly shutdown after i create my account.  I can't open it since 3 hours. Is there anybody who can help me

    hi, i got my ipad 3 this afternoon, i created my account. When i'm about to install my fb, suddenly my ipad shutdown . Since 3 hours now, i can open it. Is there anybody who can help me what to do? The batter was fully charged. Thanks you

    Try a Reset. Power and Home Press For 10 Seconds

  • NI have a Braun Photo Technik slidescan 3600 and it canot make it work with Lion: Is there anybody who sorted out the same problem? thanks

    I have a Braun Photo Technik slidescan 3600 and I cannot make it work with Lion. Is there anybody who sorted out the same problem? thanks

    We sure do have a problem - this is strictly a user to user assistance forum with users helping other users use the iPhoto program as it is - no one here has any ability to change or influnence the desigh or implementation of iPhoto
    try the iPhoto menu ==> provide iPhoto feedback
    LN

  • Is there anybody who has interface NI DAQ card with Pressure System Scanners

    I am trying to acquire data from Pressure System's sensor ESP 16 BP with NI DAQ card PCI-6221.
    Is there anybody who has perform this job.
    Thanks,
    Surender Kumar
    Regards,
    Balaji DP

    Hello Surender. 
    Thank you for contacting National Instruments. 
    Although I have never used that particular pressure sensor, the setup for measuring a pressure sensor is usually the same.  Since the sensor probably outputs a voltage that is correlated with the amount of pressure that the sensor is detecting, we can configure a voltage task inside of Measurement and Automation Explorer and then port that into LabVIEW.  A great video tutorial of a DAQmx task being created and then transferred into LabVIEW is available at:
     Creating a Task in NI-DAQmx and Using it in LabVIEW
    http://zone.ni.com/devzone/cda/tut/p/id/5374#toc2
    Also, there is a great site that contains general information on pressure sensors at:
    Measuring Pressure with Pressure Sensors
    http://zone.ni.com/devzone/cda/tut/p/id/3639
    Let me know if this information answers your questions.  If you have a more specific question, please let us know and we would be happy to help you. 
    Happy Holidays!
    Brian F
    Applications Engineer
    National Instruments

  • IS THERE ANYBODY WHO CAN TAKE IPHONE FROM TURKEY???

    I m writing from Türkiye, and I wonder that is there anybody who enable to buy iphone from Turkey in last 2 weeks, because I can not find any place to buy this mobile phone. I have heard some news paper about Apple lost label law case in Turkey. Is it true or not? If there is anybody who have information about this issue can you inform me also.

    Merhaba,
    Your question may have been answered in another thread:
    http://discussions.apple.com/thread.jspa?messageID=10665040

  • How to Block user from Sending IM or Hide Presence of there user who is not in his department

    Hi All,
    How to Block user from Sending IM or Hide Presence of there user who is not in his department.
    Thank you

    Hi Jp,
    Method 1:
    You can use the Enhanced Privacy Mode in Lync 2013
    <section class="ocpSection">
    Enable Privacy Mode
    By default, everyone except Blocked Contacts can see your presence status. To modify the privacy settings, you can do the following:
    In the Lync main window, click the Options button.
    In the Lync - Options dialog box, click Status, and then do one of the following:
    Click I want everyone to be able to see my presence regardless of system settings (override default settings).
    Click I want the system administrator to decide - currently everyone can see my presence but this could change in the future.
    </section>
    About Enhanced Privacy Mode
    If your organization has enabled Enhanced Privacy Mode in Lync, you can choose whether to limit visibility of your presence information to only those people you’ve added to your Contacts list. You do that by selecting one of the following on the
    Options->Status window:
    I want everyone to be able to see my presence
    I only want people in my Contacts list to see my presence
    Method 2:
    Using Privacy Relationship, you can block a particular user by adding him to blocked contacts
    Anil Kumar (MCITP)
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • The cord on my MacBook charger broke. Is there anyway apple would give me a new one or do I have to buy one?

    The cord on my MacBook charger broke. Is there anyway apple would give me a new one or do I have to buy one?

    Welcome to Apple Support Communities
    If you didn't cause the problem and the charger is in warranty, take it to any Apple Store or reseller and you will get a new charger for free.
    If you caused that the MacBook charger broke, you have to buy a MagSafe charger at an Apple Retail Store or the Apple Online Store > http://store.apple.com/us/product/MC461LL/A/apple-60w-magsafe-power-adapter-for- macbook-and-13-inch-macbook-pro?fnode=5a

  • Okay, so i was on craigslist and found a guy who would trade me his  fairly new Macbook 2008 model for my brand new iPad 2. Is this a good deal and should i go throuh with it?

    Okay, so i was on craigslist and found a guy who would trade me his  fairly new Macbook 2008 model for my brand new iPad 2. Is this a good deal and should i go throuh with it?

    A deal is only a good deal if you get the best value out of the deal.
    If you need a MacBook more than an iPad or an iPad more than a MacBook, then it's a good deal.
    Comes down to what value the use of the product is to you.

  • Is there anybody who can solve this

    I have seen so many query related to this on this forum, But i have not seen single satisfactory answer for the same.
    This is really disappointing. Despite of so many experts are there this is remained unsolved.
    Let me try once again, This is Printing problem in D2k Reports, Where I am using 150 column report, It works fine on 98,NT but i try the same from 2000 or XP platform it doesn't comes properly. Almost 80-90 character print in one line and rest goes in next line.
    Thanks
    Shital

    Dear Sir,
    Of course i responsible to solve my problem, but if i am not able to solve than only i forward on this forum and if nobody able to solve than who is responsible??
    Any way, here i am puting some info.
    Mode : Client/Server
    reports-version : 6.0.8.26.0
    Desired output-format : Character mode
    Pagesize : In report 8.5-11(W-H), In PRT file width is 150 defined.
    The report works fine on Win98 and create problem on 2K and XP.
    Thanks
    Vishal

  • Is There Anybody Who Can Play Movie !!!

    hi,
    i can display image files using read_image_file()
    but for movies what can i do?
    isn't there any basic built-in?
    thanks a lot for any reply..

    Helen,
    I remember that I had avi's working in Forms6i client/server. However you wont be able to use this on teh Web. Here I would simply call a URL accessing the movie to run in a Browser window.
    frank

  • Is there anybody who knows "Servers Highwater" column in GV_$PQ_SYSSTAT ???

    The definition for the servers highwater in GV_$PQ_SYSSTAT has been defined as
    "Number of active servers on this instance that have partaken in = 1 operation so far" in oracle documentation. This statement is not clear. Can anybody direct me to an URL where I can have a bit clear one.
    I believe, this value means the highest number of concurrent parallel servers used by this instance.
    Please let me know if I am wrong.
    AD.

    Thanks for your sole reply!!
    But this is not exactly what I needed. I know it already.
    Please let me know if I am wrong in defining the servers highwater in my own language..
    " The maximum number of concurrent server PQ processes spawned/used since last startup time".
    A.D.

  • Is there anybody who know about editing multiple tracks, particularly about taking out sections of all tracks?

    When a track has space between video clips, the split clip allows the "delete and close gap" to go past the CTI.  The delete leaves me to move the tracks manually, thereby loosing the alignment I worked so hard to create.

    Bill
    I have reviewed the entire thread several times. The the following is my current understanding based on your most current posts. Please let me know if I have interpreted what you wrote correctly.
    You are doing 3 tracks multi-camera editing using Premiere Elements 12, with each track scene the same but each from a different angle (all 3 in sync for the moment depicted). Based on which track content is on top, you are going along deciding what is to be seen by "removing" the appropriate clip(s). And, as you do that, unwanted clip movement is occurring which is messing up your in sync multi-camera editing alignment.
    I suspect all this started when you decided to use Delete and Close Gap and found that you could not on any video track other than Video Track1. It appears that you found "Cut" was an option. You do not want "Cut" in this instance, you want "Delete", and any clip movements should be made with clips as a group and/or individually with the Ctrl key or Alt key of the computer main keyboard held down as you do that.
    Right now I am not understanding how Snagit got into the workflow. But, the bottom line is, if you have a strategy that works for you, please go with it. I will stay with you in this task until you succeed. As a backup, you may want to keep a copy or copies of the project with the track alignment in tact.
    If I am correct in my understanding of the multi-camera editing aspects of your task, I would ask you to think about (at the right time) using Opacity of clips rather than cuts to decide what is to be shown and not shown. Select a clip, go to Applied Effects Tab/Applied Effects Palette/Opacity Panel expanded. For those clips you want to see 100% Opacity, for those you do not want to see Opacity 0% instead of a cut out.
    As for the matter of Set In and Set Out points, I suspect that the Adobe rep was referring to the following splitting of clips in the Preview Window of the project. But, I do not see that as the way to go for this particular task.
    ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
    If you think a screenshot of your opened tracks would help me focus better into your project, please post one, especially if you think that we are not yet in sync.
    Thanks.
    ATR

  • MSI K9N DIAMOND CA0106 chipset AUDIGY or SOUNDBLASTER LIVE 24

    I have 2 PC's one with an MSI K8N SLI PLATINUM mobo with onboard SOUNDBLASTER 24bit li've (CA006)
    http://global.msi.com.tw/index.php?func=proddesc&prod_no=69&maincat_no=&cat 2_no=&cat3_no=
    This system has run fine for over 2-/2 years now with no troubles it was connected to my PIONEER VSX 86 via SPDIF/toslink? and has excellent sound and performed all that I wanted including DTS DVD's and all my music video clips, DIVX movies etc etc
    The trouble is, I have just setup my new system
    MSI K9N DIAMOND also with the onboard Creative sound (CA006) and comes supplied with the Creative Audigy disc
    http://global.msi.com.tw/index.php?func=proddesc&prod_no=028&maincat_no=&ca t2_no=7
    When I try to install the drivers/setup disc it tells me that there is no Audigy onboard/installed? I have managed to install the drivers/disc from the previous soundblaster li've 24bit, It does work with the Audigy goldmine demo and has all channels of sound as it should but in the Surround mixer speaker settings it will only sound out 2 speakers even when it shows all 5. as it is currently configured
    I have tried to download many other drivers with no luck
    My main concern is the creative programs from my old system are not what I want, I paid for an AUDIGY setup not LIVE
    Is it possible to get the AUDIGY onboard running as it should (showing AUDIGY in hardware manager, not LIVE 24bit)
    I would like to be able to run the newer software from the AUDIGY disc but it is not compatible when the LIVE drivers are installed
    I have had one set of drivers display AUDIGY in the hardware manager but when I tried to use the speaker settings etc it fails and says soundcard not found even though it clearly shows AUDIGY drivers are installed
    I have been very happy with the creative sound so far on my first MSI system but I'm not very impressed with this setup and I'm still not sure who's fault it is MSI or CREATIVE?
    Can someone give me some details as to what is going on here, I would like to know if it is also possible to use some kind of new software/programs for the soundblaster LIVE that has maybe more settings/functions or just a later better style as I may have to use the same on my new system
    The menu's etc in my new manual (K9N DIAMOND) look almost identical to those included with the K8N SLI, The disc included with the K9N DIAMOND has an AUDIGY quick start program/demo which gives you a preview/guide on how to use the supposed AUDIGY which has all new menu's, layout and features which im unable to use?
    As mentioned I have used the soundblaster 24bit LIVE for well over 2 years now connected to my PIONEER VSX86 via a digital cable so all the previous settings etc have been compared and doublechecked but im unable to find answers, If I am unable to find help or any way to install the AUDIGY as im meant to have I may resort to fitting another soundcard and I may got to another brand unfortunately
    Any help appreciated

    If I am right the onboard Audigy on the MSI K9N Diamond utilizes the CA006 chip instead of the EMU0k2, therefore it is not a real/genuine Audigy soundcard. In fact it's the same as your former soundblaster li've 24bit which also utilizes the same CA006 chipset. That's why you can use the driver from the SB li've 24bit for your new "Audigy" onboard sound. Also there are other soundcards that are not genuine Audigy soundcards: Audigy Se, Audigy LS and, yes, also the X-fi Xtreme Audio, all utilizing the same chip, CA006. Creative Labs use some marketing techniques, add some different (newer) software/apps for the soundcard and give the soundcard (with the same chipset) a different name. In my opinion, if you for example buy a X-fi Xtreme Audio you in fact for the most part paid for the included newer softwares (which for example add "X-fi features like Crystalizer etc.).
    If you really want a better soundcard, maybe go for the X-fi XtremeMusic or XtremeGamer which utilizes the genuine EMU20K chip (with hardware acceleration). The soundquality is significantly higher than the soundcards with the CA006 chip.
    As for the drivers for the soundcard:
    Official Creative Labs driver for Sound Blaster? Audigy? Value/SE/LS, or Sound Blaster Li've!? 24-bit audio devices
    Good luck!
    Message Edited by CTman on 05-07-2008 0:28 AM

Maybe you are looking for

  • Spry menu problems with Internet explorer

    Hi everyone I'm having ongoing problems with my horizontal menus and internet explorer. They work fine in other browsers and with the generous help of others at these forums I've managed to sort out most of the problems. But I've hit a real wall with

  • I cracked my iPhone what are my options?

    Hey I just recently got this refurbished iPhone last week from asurion because I cracked my last phone. My mom said that my insurance on the phone made me have to get a refurbished phone from them instead of just being able to replace the screen. The

  • Group by in Oracle 8i

    Did anyone know why oracle 8i did not return the rows in order coloumns used in the group by condition ? Eg. select emp_name,count(*) from employees where department = '971' group by emp_name The above query returned the count in name order in 7.3 by

  • Unable to get Phone Dialer working

    Hello everyone, I have setup a brand new client. And I am unable to get the dialer working correctly. I have followed the directions here: Re: The Top10 most frequently asked questions and answers (FAQ) January 2009 - Telephony service is started - W

  • Please help, iPod Nano and iTunes issues

    1. I can't update my iPod Product Red. I've downloaded the update, and when I click "update" in iTunes, it just sits there for hours saying its updating 2. The first time I start windows, connect my iPod Nano and then start iTunes (or even the other