Cable TV is connected to BOSE external sound, but Netflix sound is coming thru TV (47TL515)

Hi there --  our cable tv is set up no problem with the BOSE which provides much preferred sound for our TV viewing. However, when we connected to Netflix, the sound switched over to the physical TV and it sounds awful. Looked to choose the audio, but it wasn't a highlighted option (meaning we couldn;t choose anything but the TV).  Thoughts?  Thank you very much - 

The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. But check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
  If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

Similar Messages

  • IPhone 4 does not connect to Bose mini sound via Bluetooth. It cannot locate device. Can someone advice please?

    Neither my iPhone 4or ipad can connect to Bose mini sound system via Bluetooth.  Message says it cannot connect, make sure Bose is turned on and within range,, I have done this, still no connection . Can anyone help ? Thank you.

    Thank you. I have found a post stating hold the Bluetooth button for ten seconds then the mute button for ten seconds. This has solved my problem. Thank you.

  • PC can't connect to AEB external drive, but Mac can.

    Until recently I was able to connect to the external hard drive I have attached to my 1 generation Airport Extreme base station, version 5.6.1, running firmware version 7.6.4. It just stopped showing up one day and it gives me errors when I try to connect saying credentials are wrong, but they're not. I've tried everything I could find, including changing some Windows settings, reverting firmware, resets and a lot more. It used to automatically connect at start up, and showed up as a 'Z' drive, and worked great. The drive is fine as well, that was my first concern. I just connected to it from the File Browser app from the app store, and my other Apple devices, MPB, Apple TV, both see it. Just not my Windows 7 pc. This was my last resort after many hours of troubleshooting. Any help would be greatly appreciated, thanks in advance.

    Standard network troubleshooting.
    1. If you are using wireless plug in by ethernet.. never trust wireless.
    2. If the computer gets an IP from the Extreme.. ping the extreme in a command window.. does it respond? It must respond before worrying about all the rest.. Windows can auto decide it is now in a public location and ram up the firewall. Make sure your network location is home.. and if necessary turn off the firewall.. the TC must respond at least by IP.. name as well would be good.
    3. Open the Control Panel admin tools and make sure bonjour is running as a service. If it has failed stop and restart it.
    4. Try mounting the hard disk directly by IP in windows explorer.
    \\10.0.1.1 (replace with the actual IP address).
    5. If it is only wireless that is the problem.. you probably had some sneaky windows security patch install and that ruined everything.. windows patches are often 2 steps forward.. 3 backwards.. you can no longer be attacked because you no longer have internet connection!!

  • Website sound not coming thru iPod Touch - Is there a solution???

    Hello all,
    I have the iPod Touch and when connecting to the internet with it, to a site such as Sirius.com to listen to music or talk, no audio comes thru. For instance, if I want to log into my sirius.com account, and listen to a talk show, how do I make the audio work? Sound works just fine with iTunes music, but just doesn't put audio thru if coming from an actual website. Is this possible? Thanks! Mike Fussell

    Probably not. The only audio that will be available through the browser currently is audio formatted to be played through quicktime. Nothing to be done except wait and see if other browser plug-ins appear after the 2.0 firmware.

  • Connecting to an external dabase in workflow 7.2

    Hi All,
    I am trying to create a web service by using SQL component in workflow designer 7.2 to connect to an external database but could not have it done since I do not see any option to configure it. I know that Avoka has developed a QPAC called SQL+import which can use to connect to an external database but I would like to know if there is another option to do it so I can do a comparison before I decide to purchase it. Does any one have any idea please advise.
    Thanks in advance,
    Han Dao

    Hi Brett,
    According to your description, you are experiencing the error when you connect to SQL Server Analysis Services database on a SSIS package, right?
    In your scenario, you said that the package can be executed successfully on your local environment, the issue only occurs on the SSAS server. So please ensure that the provider was installed on the server. Besides, here is a blog which describe how
    to configure the Analysis Services Processing Task in SQL Server 2012 Integration Services， please refer to the link below to see the details.
    http://www.mssqltips.com/sqlservertip/2994/configuring-the-analysis-services-processing-task-in-sql-server-2012-integration-services/
    Regards,
    Charlie Liao
    TechNet Community Support

  • Unity Connection transfer to external number plays music on hold continuously.

    We found an issue when transfer external calls out of Unity Connection (9.0 and 9.1) that the Music on Hold continuously plays and never connects the call.  
    The outgoing calls are going out SIP.  The call does get placed and does connect to the external number but it is promptly dropped as the transfer does not complete.  The calling party only hears hold music.
    Through testing we found that this only happens when the call goes out SIP.  We also found that the issue is resolved when changing the Transfer Rules from Release to Switch to Supervise Transfer.  
    Would we need to change each User's Transfer Rules to Supervise Transfer or is there another way to release the transfer?  Is this a bug?

    Hi Jennifer,
    Your issue seems to be as below.
    Problem 2. Call is Connected and then Disconnected
    The call is connected and then it is disconnected. The call transfer is successful when an internal extension initiates the call whereas the call fails, if the calling side is from PSTN.
    Call Flow
    PSTN>H323 GW>CUCM>Unity Connection Call Handler (Any Caller Input - Transfer to Alternate Contact Number)>External Number or CTI RP with CFA to External Number.
    Core Issue/Call Flow Analysis
    Here is an analysis of the call flow and the common problem for a failed call transfer:
    The First call leg is a H323 Fast Start, from the Gateway to the CUCM. CUC receives the call and transfers the call back to CUCM. CUCM in turn places the first call on hold and initiates a new call to the PSTN.
    The second call leg is a H323 Slow start. Finally, when the call is answered, the CUCM or the Gateway does not send H245 capabilities. This causes a timeout and the call is disconnected.
    Solution
    By default, Wait for Far End H.245 Terminal Capability Set (TCS) check box is checked. As a result, CUCM expects the far-end H.245 TCS before it sends its H.245 TCS. If this checkbox is unchecked, CUCM must initiate capabilities exchange.
    In order to resolve this problem:
    Uncheck the Wait for Far End H.245 Terminal Capability Set (TCS) check box.
    Or
    Make a change on the gateway so that the gateway initiates capabilities exchange.
    Enter these commands in order to configure a change required on the gateway.
    conf t
        voice service voip
       h323
              h225 start-h245 on-connect
            exit
    Thanks,
    Nishant

  • How do I get 5.1 sound from iTunes on my computer connected to Bose T20?

    I have my computer connected to a Bose T20 with an HDMI cable. I can get surround sound with movies, but not with iTunes. I only get stereo instead of 5.1.
    I also have Apple TV connected to Bose and can get surround sound from iTunes when piped through Apple TV. Bose has told me to check the sound settings on my computer which I have done. The sound settings have 5.1 enabled.

    Hi there,
    You may find the article below helpful.
    Setting up iTunes and DVD Player for digital surround sound
    http://support.apple.com/kb/HT4072
    -Griff W.

  • IMac 10.6.8, Snow Leopard with iTunes 11.0.1. loss of wifi speed when connecting a Bose Sound System via bluetooth

    Hello, I have an iMac 10.6.8, Snow Leopard with iTunes 11.0.1. When connecting my Bose Sound System via bluetooth the wifi downloadspeed goes from snappy to a crawl, disconnecting the bluetooth connection, the downloadspeed goes up again. Don't have this problems with the Sound System when connecting it to my iPad. I like to mention too, that the downloadspeed of my iPad is always better than of my iMac. Are there any experiences concerning this problem? Thank you in advance.

    UPDATE - PROBLEM SOLVED!!!!!!
    You can thank me later - after an hour on the phone, I finally got through to a Senior Engineer.
    Apperently the issues lies with GRID VIEW.
    Open your Itunes, Click on TV SHOWS, then quickly change your view from GRID VIEW (Defaults to this) to List View and Viola!
    We tested it out on the phone just minutes ago, my problem is solved and I suspect if you guys try this yours will be too.

  • My iphone 4s wont connect in apple tv 3rd gen dont show the airplay icon, but apple tv can connect in Bose sound touch 20 via airplay, and the iphone also connect to sound touch 20 via airplay, so it means theres something wrong in my iphone.

    my iphone 4s wont connect in apple tv 3rd gen dont show the airplay icon, but apple tv can connect in Bose sound touch 20 via airplay, and the iphone also connect to sound touch 20 via airplay, ive just buy it yesterday in Mediamarkt Spain,, so it means theres something wrong between my iphone and the apple tv? please me

    Hi jaredfox06,
    If I understand the issue correctly, you have recently purchased a used iPhone and you do not see your Apple TV in the control center in order to AirPlay.  To troubleshoot this issue please follow the steps outlined below.
    Try these steps first
    Make sure that you have the latest software on your iOS device and Apple TV.
    Make sure that both devices have Wi-Fi turned on.
    On your iOS device, go to Settings > Wi-Fi.
    On your Apple TV, go to Settings > General > Network.
    If you're trying to use peer-to-peer AirPlay, make sure that both devices have Bluetooth turned on.
    On your iOS device, go to Settings > Bluetooth.
    On your Apple TV, go to Settings > General > Bluetooth.
         If you don't see AirPlay in Control Center
    When an AirPlay-enabled device is available, you'll see AirPlay in Control Center on your iOS device.
    If you don't, try these steps:
    Restart your iOS device and Apple TV.
    Connect both devices to the same Wi-Fi network.
    On your iOS device, go to Settings > Wi-Fi.
    On your Apple TV, go to Settings > General > Network. If your Apple TV is connected using Ethernet, make sure that it’s plugged in to the router you're using for Wi-Fi.
    On your Apple TV, make sure that AirPlay is turned on. Go to Settings > AirPlay.
    Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch - Apple Support
    Have a good one,
    Alex H.

  • I cannot get sound through cable box after connecting apple tv

    I cannot get sound through cable box after connecting apple tv, any suggestions?

    Perhaps you disturbed or loosened the HDMI or other cable  from the cable box to the TV?

  • I have a problem with the external sound of my ipod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

    I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

    - Try insering and removing the headphone plug a dozen times or so.
    - Try cleaning out the headphone jack in the iPod.
    - Resett he iPod. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restoe to factory defaults/new iPod
    If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
    If not underwarranty Apple will only exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following is less expensive. Here is one. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • My iPod is playing internal and external sound at the same time when my headphones are connected

    Hi, I have an iPod nano, 16 GB, 5th gen, that I've had for almost five years. It has never given me any problems before, but today when I plugged in my headphones the sound played not only inside the headphones but through the iPod's external speaker. When I turn the volume up or down only the external sound goes up or down, the headphones still play music at the same volume. I tried connecting the iPod to other headphones, and inserted and removed the headphone jack from the iPod about 20 times, the only thing I haven't tried is restoring because I don't know if that would make any difference and I would like to avoid restoring if I can. Thank you for your time.

    Thank you for the suggestion, but it didn't work.

  • Bose external speakers sound muffled...

     HP Pavilion dv6-1259dx notebook, windows 7-64 bit.  Bose external speakers sound muffled.  Is there a way to change bass and treble settings?

    You can't beat Bose!

  • Connecting a mixer to sound blaster: live 24bit externa

    Iv got some dj decks, and wanted to record my mixes to my laptop, so i saw the external sound blaster li've and thought that would do the trick. But it turns out that it is alot more complicated than?i thought. First of all, it took me ato install everythnig without something going wrong, but all the driver (for vista) seem to be ok now. Once installed, i connected a 3.5mm jack into the line in, on the soundblaster, and conncected the other end to my mixer. That all done, i went onto the recording programme that you get with the sb, but here is where it goes wrong the message 'there is no audio device on the system, the application will now close' comes up. Of course this stops me getting onto any of the programmes, and stops me from recording. After this i checked on control panel/device manager, and it said that everything was working correctly, but on another page it says 'cannot find hardware connected' although the blue power light is on. I have now run out of ideas of what to do, so any help would be great.

    Iv got some dj decks, and wanted to record my mixes to my laptop, so i saw the external sound blaster li've and thought that would do the trick. But it turns out that it is alot more complicated than?i thought. First of all, it took me ato install everythnig without something going wrong, but all the driver (for vista) seem to be ok now. Once installed, i connected a 3.5mm jack into the line in, on the soundblaster, and conncected the other end to my mixer. That all done, i went onto the recording programme that you get with the sb, but here is where it goes wrong the message 'there is no audio device on the system, the application will now close' comes up. Of course this stops me getting onto any of the programmes, and stops me from recording. After this i checked on control panel/device manager, and it said that everything was working correctly, but on another page it says 'cannot find hardware connected' although the blue power light is on. I have now run out of ideas of what to do, so any help would be great.

  • HT4623 Why won't my Bose mini sound link re-connect?

    Having trouble with bluetooth connection Iphone 5 to Bose mini sound link, any solutions?

    Any time you change network hardware it is always a good idea to perform a complete power recycle of this hardware. Check out the following AirPort User Tip for details. Please post back your results.

Maybe you are looking for