CableCARD issue: Channel 1549 only audio..no video

As previously posted with channels 1620 and 1685 (both in the Spanish language package)...now Channel 1549 is showing the same behaviour on my Tivo's that use CableCARDs...no video..just audio.  But on the Verizon STB it comes through just fine.  Can anyone from Verizon check this out?  Why are these problems only occurring in the Spanish-language channels?

** bump **  ??

Similar Messages

  • How to capture only audio from video on iMovie 11?

    Iam working with imovie. I need only  audio from video. Could some body help me please?

    >>> click >>>
    http://help.apple.com/imovie/index.html#mov3b0fa051

  • Problem with TV out, only audio, no video

    I has just bought a new ipod video 30GB and I also bought a A/V cable
    of apple. But when I connect to my television. Only hear audio from
    television but no video.
    I tried a lot of ways as folows:
    + video setting : changed TV out --> ON
    + I tried restone ipod to factory condition
    + I tried to change the position of 3 connectors (Yellow,Red, Whitle)
    of A/V cable (according to standard, Yellow is video connector).
    + I tried some tips from Discussion Techniques from Apple Forum
    But I still can't see video, just hear audio from Television.
    What's problem?
    I think Ipod only send the audio signal, not video signal.
    Can you help me to solve this problem?
    Thank you very much.

    As well I had the same problem with my i-pod and the one of my wife. The solution was simple:
    config: i-pod 60Gb; i-pod 30Gb
    cable: no name audio/video A/V cable
    TV-out: select ask (not on!!!)
    cable into TV: white on white
    yellow on red
    red on yellow
    There are no problems with bad video quality if volume is high, just working fine
    What may be the problem: I think, the automatic detect (if you put your setting for TV-out on your i-pod to on) is not working. As well as using only headphones there must be an electronic cirquit detection; means with no Apple stuff just not working. As well there are the yellow and red cable changed; means white and yellow have audio; red video.
    Working so for video and diashow on my pod each time I´ve to select TV-Out manually starting video or Dia Show. In that moment both applications are starting in small windows, not in Full Screen mode on the pod.
    The order to connect TV or i-pod doesn´t matter; it´s just the manual setting the i-pod for TV-out.
    I hope, the info can help you.
    i-pod 60Gb   Windows XP Pro  

  • Lenovo B520 sends only audio, not video to tv

    Hello. I want to play what's on my B520 on my TV. However, only audio is sent out but no video and whatever desktop image (desktop background image, not programs or anything else). I can hear the audio from my computer on the TV. I can also see whatever image I have set as my desktop image (behind all the icons). But I can't even see my desktop icons and if I'm playing some video or something my TV plays the sound portion but just shows my desktop background image with no video being sent other than that. Can somebody please tell me what I'm doing wrong? I have a JVC TV but it's showing the desktop image so something is being sent from B520 so I don't think the problem is with the TV. Please help.
    Solved!
    Go to Solution.

    it sound like you have extended your desktop not cloned it press and hold windows key then tap P to cycle through the options, duplicate or second screen is the option you are after
    Thx dave
    yoga 2, lenovo b540
    3 custom gaming pc systems

  • HT5517 When im doing an airplay how come only audio no video on the TV? and its showing to my iphone this device can only play sounds to airplay!

    When i'm doing airplay ther is no video only audio! and from my iphone its say this device can only play sound to airplay!!!

    what video are you trying to stream via airplay?
    currently only video from youtube app or ipod app is supported.
    any other app will only stream the audio.

  • QuickTime 7.3 - only audio, no video on Safari

    Although Firefox works perfectly well, I only get audio, without any video with Safari 3.0.4.
    This is the case even when trying to view the videos on Apple's website.
    I have had this problem since QuickTime 7.2 and was hoping that QuickTime 7.3 would solve it. It didn't.

    Thanks Kirk for the solution to the Safari - QuickTime problem; it worked for me. I am having the same problem with Firefox (2.0.0.7). Removing the plug-ins from the Mozilla folder (HD->Library->Mozilla) did not bring functionality back. Nor did it not work to removed the QuickTime web plug-in from the Internet plug-in folder. Can you suggest a solution?
    Thank you,
    CTMA

  • FCP export to camera only audio, not video...

    Hello - I'm trying to export my project to miniDV, something I've done for a long time w/no problem.  But now, even when I try to view the footage on my camera, only the audio come up.  The video freezes on one frame, but the audio plays, and then when I go to play it again, it freezes at the frame I stopped it at.  Then when trying to Print to Video, only the audio comes up, but not the video.  Thank you.

    Hello - it is actually a combination of HD & SD to standard mini DV... But I actually put it in another sequence, and it all seemed to work!

  • Capturing only audio, no video beyond first frame

    When I log and capture it looks okay until I move clips to timeline. Then I only have audio and the first frame. I've cleared the settings and preferences each time. Still happens. What is going on? (The capture audio only is NOT on).

    Is it only a single frame of video in the viewer window ie if you double click the clip in the bin is it the same frame through the entire clip, or is it that only 1 frame displays when you drop the clip in the timeline? if it's the latter check your view>external video settings to make sure they conform to your sequence settings.

  • HT4363 Ipod touch 5th generation plays only audio of videos

    Hi,
    My new Ipod touch 5th generation that was released in October  2012 does not play video images in tv through Apple tv. It plays the audio of the video, but no images. How can I get it to play you tube videos with images? My Ipad has no problem connecting with the Apple tv and videos play without an issue. Help please!!
    Regards

    Agreed, but the dents are extremely minor, its not like the entire case is cracked and its coming off, or the screens broken. It's just a slight chip. And ispite it being so minor they have declined the replacement.

  • Videos playing only audio, not video

    i recently added a bunch of ripped videos to my iphone (MPEG-4 video). when i try to play them, iphone transitions to landscape mode as if it were going to display the video, but it only plays sound. the screen remains black. videos purchased from itunes in the same format play fine, other MPEG-4s don't. any thoughts as to why only the audio is playing and not the video as well? thanks.

    l'age d'or,
    MPEG-4 has several possible encoding options. If you open the video in Quicktime, and choose Window -> Show Movie Info, it will list the encoding options.
    You may want to verify the videos are not MUXed, and they have the appropriate video encoding. This tutorial gives the steps for converting videos with Quicktime:
    http://www.apple.com/quicktime/tutorials/creatingvideo.html
    Hope this helps,
    Nathan C.

  • HT4437 air play only audio not video way

    trying to play a movie i rented from my phone on the apple tv but i only get audio no pic y

    iphone4 dont support mirror airplay

  • JVC GY-HM150 MP4 only audio no video - Please Help

    Hi there. I am using Adobe Premiere Pro CS5.5 in Windows 7 Ultimate 64 bit. I recently went to a convention with and got a ton of footage with my JVC GY HM150. Now I'm back and trying to edit but when I try to import the MP4 it only shows it as audio and is shows to be an audio file. I have updated Premiere, Media Encoder and quicktime but to no avail. Also for some reason quicktime can't open the file but I know the file good cause VLC can play it with no prob. I know from the instruction book that it encodes in a 35 Mbps (Max) MPEG2 Long GOP VBR. This really pisses me off cause one of the main things about this camera was the ease to import and edit footage.

    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

  • Imovie opens only audio, no video .AVI clips Samsung camcorder

    I am using the SD storage with USB transfer on the Samsung SC-D363. the window opens and the files transfer fine, but video is missing. Maybe only DV tapes can be used to tranfer video to my mac?

    I can't find any reference anywhere to a Samsung SC-D363 ..perhaps there's an error in the model name or number.
    Any device which creates videos on SD storage should automatically copy them into iPhoto when you start that up with the device connected via USB.
    Or, if that doesn't work, connect the Samsung and look in your Mac's 'Applications' folder for the 'Image Capture' program: that should recognise the camera and import from the SD card.
    With either of those methods - but especially with iPhoto - any movies which are playable in iMovie can then be imported from iPhoto.
    iMovie can play MPEG-4 videos (..mini videos which have been saved in MPEG-4 format ..see your Samsung's instruction book to find out what format the camera uses for movies..) and it can play some .avi and other movie formats. In some cases, though, you might find that the video plays OK, but there's no sound. In those cases you could try playing the movie(s) using the QuickTime program.
    If your Samsung is a normal DV camcorder which also saves mini-movies to the SD card, then you'll be able to use a USB cable to copy the mini-movies, as described above, but you'll need a FireWire/DV/i.Link (different names for the same thing) 4-pin-to-six-pin cable to copy normal DV video from the camcorder to your Mac.

  • Black Magic Intensity Pro Play only Audio when edit in CS 5.5

    Hi i have an problem, when i try to edit with Black Magic Intensity Pro in premiere CS5.5
    i can play only Audio but not Video so i check settings on Premiere and control panel for
    Black Magic Intensity and everything is OK and i check connections the preview is connect
    via HDMI cacle and Composite Video/Audio and in both cases i get only Audio but no Video
    so what is the problem? An driver for Black Magic Intensity Pro issue or what?
    Current driver version is 8.2.1
    Thanks.

    Thanks i already do that and nothing,again only audio no Video.
    I tray to play with integrated software Media Express who comes
    with driver and working good.
    So what is the problem the driver or Premiere CS5.5?

  • No audio with video Premiere 11, distorted work area

    I downloaded Premiere 11 onto my Macbook Pro.  I have 2 issues, I have no audio on videos or with narration.  Mp3's play fine.  When I bring media into the work space, every thing is distorted and I can't see where I am dropping it or what I am doing with it.  We have Premiere 11 on my husbands Mac and it works fine.  Any help would be appreciated.

    nursesharonhaz
    Thanks for the details. Moving forward...assuming that all new projects behave the same with regard to your problem media in your Premiere Elements 11 Mac.
    1. Narration. Please create a .wav narration clip in the free audio editor named Audacity and import them into Premiere Elements 11 Mac with the project's Add Media/Files and Folder/Project Assets from where you drag it to the Timeline Narration Track.
    2. MOV File. What is the brand/model/settings for the camera that recorded that video?
    Double check to assure that you have the latest version of QuickTime installed on your computer with Premiere Elements 11 Mac.
    How does the editing workspace distorts weirdly when the .mov file is dragged from Project Assets to Video Track 1 of the Timeline?
    Do MaxBook Pro have themes as does Windows (Aero, Basic, and High Contrast)?
    3. Miscellaenous. Delete the Adobe Premiere Elements Prefs file in the 12.0 Folder
    Users\Libraries\............\Adobe\Premiere Elements\12.0
    For Mac, I am not sure if the ......is Preferences or Application Support
    I am wondering about your Intel Iris video card/graphics card. Need to find out if there is any history on that with Premiere Elements.
    If none of the above presents as contributing to the core issue, then let us try downloading a new source of installation files. Please do so from
    the following web site. We will be using installation files for Premiere Elements 11 tryout into which you can insert your purchased serial number.
    Photoshop Elements 11 Direct Download Links: Free Trials, Premiere | ProDesignTools
    You can also look at the Premiere Elements 12 tryout to determine if there is any difference in behavior between 11 and 12.
    Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
    Let us see if any of the above has any impact on your situation.
    Thanks.
    ATR

Maybe you are looking for

  • To view the data in open hub destination

    Hi all, Can anyone help me out how to check the data in open hub destination file. These are the details: Destination: File Type of file : Logical file Application Server file name : XXXXXXX If it was file name, i know it has to be checked in AL11 wi

  • Audio layer questions

    I recorded some 720P video with an HVX 200 using a mic connected directly to the camera. I just ingested the video. There is an audio wave form visible in the top layer, not in the second layer, a waveform in the third layer and not in the forth laye

  • Using a username and password to access the network

    Dear gents, i am trying to make the access to the network via 2 things : SSID's key first , then using a username and password to connect, or at least username and password. i have aironet 1130ag , and 40 users. Any suggestions..

  • Problem about Still Image

    I have import a still image into FCP with resolution 720 x 576 . when i will in the source monitor, the image is clear. however, when i put it into the timeline, i can see it is blur and jitter. I have tried all method like applying "Flicker Filter"

  • Error Connecting to SAP server via JCO

    Hi,   When i tried to connect SAP server using JCO its giving error "Fatal error User name or password incorrect" .But with the same username and password i'm able to login to the SAP system with SAP logon pad. My username contains only numeric,does