Cabling with 733x controller
The 733x motion controller has two connectors - one for "motion I/O" and one for "digital I/O".
I simply want to bring both of these out to screw terminals, but the docs are very vague as to which cables to use for the motion I/O connector.
Can I use the SH68-68-D1 cable and the CB-68LP unshielded I/O connector block for BOTH motion and digital I/O? The compatibility charts that I can find do not specify any cable/connector block combination for the motion I/O connection. The UMI-7764 is overkill and unnecessary for my application.
Thanks for the help.
Len
To use the 73xx boards with a CB-68LP you need the SH68-C68-S cable. The CB-68LP has the same connector like the UMI-7764 so you need to use the same cable. The SH68-68-D1 cable is not an option as it doesn't fit to the 73xx boards.
SH68-C68-S order information:
2 m ...........................................186381-02
0.5 m .........................................186381-0R5
Please follow this link for further information.
Best regards,
Jochen Klier
National Instruments Germany
Similar Messages
-
I buy a ipod cable with together the 1394 & usb connect together, so is this mean it can use 1394 to transfer data to ipod?
thk a lot
The url show the cable that i buy.
http://hk.f2.page.auctions.yahoo.com/hk/auction/b3890652so is this mean it can use 1394 to transfer data to ipod?
No, you cannot.
You can only transfer data using USB. There is no Firewire controller in the 5th Gen iPod, so even if you have the right cable, data transfer will still be impossible.
That cable can be used to charge the iPod via Firewire, but that's about all it can do with the firewire side of it. -
Hey everyone,
I got my Macbook Air (Mid 2013 model) last month and I want to record my acoustic-electric guitar on Garageband (which came with the Air).
I don't want to buy a guitar that has a USB. I have a cable with a 3.5 mm headphone jack on both ends like the one pictured here on this website http://www.bestdealaz.com/item.php?id=628 (i didn't buy it from this site though).
I connected a 6.3 mm guitar adapter (http://www.ebay.com/bhp/headphone-guitar-adapter) to this cable. Then I connected one end of the cable to my guitar and the other end to the Headphone/Microphone jack on the left side of the MBA.
I saw how other people were saying to go to System Preferences / Sound and then change audio output to audio input.
I can't do that. I tried.
Please help!
Thank you.Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain -
How to connect video-in cable with Qosmio G50?
Hi
I bought the Qosmio G50-11S, and received a video in cable with it. (Red/White/Yellow RCA jack to mini jack) But I cannot find any way of connecting it to my notebook, not the manual nor any online resources talks about it. The issue is I need to capture video from my video recorder to my notebook and the normal TV antenna comes with a lot of noise, so I which to utilize the video in cable. Any ideas?
Thanks
MHello
In the past Ive made some experiments with it. I wanted to create DVDs copying the material from old VHS recorder. Do you want to use the same recorder? Ive done this on Qosmio G30 but the principle is the same.
The fact is that you must send the signal to the notebook and for this you must use video-in port.
I don't see your Qosmio has several of them so I think only way to send signal into your notebook is to use antenna-in port. Which video-out port you want to use on your recorder? -
I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.
Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.
-
Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,any ideas? thanks, Derek
Dave I'm glad to say that it works perfectly but I'm embarrassed to say that my 12 year old nephew hooked it up in about 10 minutes.
If you have the Kanex Mini DisplayPort cable it will work, what confused me was changing the display settings in System Preferences,
and dragging the mac screen from the mac onto the tv. Sorry I cant be more helpful but you have the right cable now you need a 12 year old nephew.
Good luck Derek -
Please confirm use of mini DVI-Video (s-video) cable with Macbook
Hi,
I have tried to use the Mini DVI-> Video cable with my new Macbook in order to be able to connect to my TV.
Unfortunately it doesnt work, I do get the resolution change when I plug in the cable but nothing on the TV. I went back to the local Apple center and they tested the cable on a Powerbook G4, it worked flawlessly. Then they tried a monitor on my Macbook's DVI port, it also worked.
But when trying the mini DVI to Video cable on the Macbook, no luck!
Can anybody please confirm they have used this cable and connected successfully to a TV?? Using either the s-video option or composite?
Thanks in advance!!!
Best Regards,
Thomas
G5 DP2.0, Macbook Mac OS X (10.4.6)I can confirm that the s-video connection to a standard CRT TV using the mini-DVI video adapter does NOT work with my MacBook.
The display is detected, and when mirroring is enabled, the resolution on the MacBook display is adjusted, but the TV doesn't display the MacBook signal. Instead, I get a black screen or some random flickers of color. Following the instructions in the help files, I've adjusted the resolution down to its lowest level with no success.
My guess is that this is related to the fact that the integrated graphics relies on system RAM, and I am running my machine with the stock 512 Mb RAM it shipped with (2 GB are on their way).
On the off chance it would help, I even tried closing the display, in hopes that the memory savings from turning off the MacBook display would enable the TV signal, but no luck.
Thomas, how much RAM do you have in your MacBook?
Those of you who have been successful using external displays, are any of you using the stock 512 Mb RAM?
2.0 GHz Core Duo MacBook (Black), 512 Mb RAM Mac OS X (10.4.6) Dual 500 MHz G4 "Gigabit Ethernet" -
Windows Server 2008 R2: Server unable to authenticate with Domain Controller
Hello, I was wondering what could be the reason for this error if it is certain that there was no other computer on the network using the same name:
This computer could not authenticate with<Domain-controller>, a Windows domain controller for domain <Domain-name>, and therefore this computer might deny logon requests. This
inability to authenticate might be caused by another computer on the same network using the same name or the password for this computer account is not recognized.
What would cause the machine account pw to be 'not recognized'?You can track changes in AD by enabling AD Auditing: https://technet.microsoft.com/en-us/library/cc731764%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
As reading the logs is usually a complicated and time consuming task, it is recommended to use a third party tool for auditing. The one I usually recommend is Lepide Auditor - Active Directory: http://www.lepide.com/lepideauditor/active-directory.html
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
How can I play music on my macbook pro (OSX Lion) through a Pioneer receiver? I've connected them with a mini display port to HDMI cable with audio support bought at the Apple Store, but there's no sound coming through. There are 4 HDMI-in ports on the receiver - BD, DVD, DVR/BDR and audio. In my system preferences for sound, the receiver doesn't show up as an output option. Can anyone please advise. (ps, this is my first time posting a question, so I hope I can find your answers!) thanks, JP downunder
For sound, try the audio output port and connecting to the RCA audio input ports on your Pioneer receiver. Use something like this:
http://eshop.macsales.com/item/OWC/PODCONNECTOR/
Ciao. -
Apple TV worked until today. Message says unsupported signal check your output device. I have checked hdmi cable with another device and it's fine. Put on a different tv and same message. Went out yesterday and bought a new Apple TV and same problem.
Which TV do you have.
You may wish to try the following:
Press and hold the menu and the up button simultaneously on the remote for six seconds, the Apple TV should then begin to cycle through the various resolutions available to it at 20 second intervals.. If you see a picture appear up on your screen, use the remote to scroll down to the OK option and select it. -
How do I create a track with just controller MIDI data in it?
How can I create a track with just MIDI controller data in it?
For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
I can then use this setup as a template for future projects.
How can I do this?
It seems like LPX will not allow me to enter any controller data into a track without first defining a region. However, it seems that LPX also won't allow me to create a region with just controller data in it.
Ideas?
Thanks
-MikeSoniq2 wrote:
How can I create a track with just MIDI controller data in it?
For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
I can then use this setup as a template for future projects.
How can I do this?
Let me qualify, I'm using Logic 9, not upgrading for various reasons.
Is this for an external Instrument? If so it's very easy to do using the inspector, but first you have to create an instrument in the environment. (at least in L9 and the way I do it, which is old school) Here's an example of an external instrument setup in the Environment.
A multi Instrument is created, channels 1, 2, 3, & 9 are active. Patch names are entered, format for bank change is selected. (just happens I selected channel 14 to open the patch names). This Instrument will now appear in the arrange page, and you can set patch change, bank change, volume & pan. -
I have a brand new Ipod touch with front facing camera. Not sure which generation it is. My wife connected the iPod Touch and chose the restore option when connecting to iTunes. It was a mistake and by the time I got there, I saw the screen with USB cable with an arrow facing towards iTunes logo. I cannot get the iPod out of this state.
Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Also reset the iPod.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
My ipod touch is stuck on a screen that show a picture of the USB cable with an arrow to a picture of a CD with a music note over it. I have reset and turned on and off.....what do I do??
Connect it to iTunes and restore it.
B-rock -
My Ipod touch is frozen. The screen shows only USB cable with arrow point to the word Itunes. What is the problem? This is the second touch I have had that has this same problem. HELP!
This time try restoring the iPod to factory defaults/new iPod instead of from backup. You may have some corruption that is causing the problem and it may now be in the backup. If the problem persists after restoring to factory defaults/new iPod. then you likely have a hardware problem and ana ppointment at the Genius Bar of an Apple store is in order.
-
My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
HT6030 I no longer have my notes in mail on my MacBook Pro
I no longer have my notes in 'mail' on my MacBook Pro, but they are in my IPhone and IPad. They used to be in my MacBook Pro and they did synch with the other two devices with ICloud. I think that it may have something to do with upgrading Maverick
-
Two questions about Camera Raw and Lightroom
I am now shooting in RAW image format only and cataloging those images into Lightroom. My first question is: How do I open an image in Camera Raw from Lightroom? When I right click on an image in Lightroom it gives me a choice to edit in > Photoshop,
-
How do I activate the card reader?
How do I activate the card reader? It used to read it but now it won't.
-
SINGLE SCREEN ENTRY OF CONFIRMATIONS
Hi, Iam from other module and I have a requirement in PP.When I execute CO11N transaction in one Client(Dev) Iam getting a screen with 6 fields in Activities(Activity1,Activity2,Activity3 etc) and in the other client(QA) Iam getting a screen with ONL
-
Object is locked ( Plan ver.,obj.ty.,obj.ID )
Hi Experts , I got one message while processing IDOC like " A lock key has been set for the object.The object is : plan version,Object Type,Object ID."...If anyone knows,plz guide me....