Cac card reader doesn't work on my mac now

I upgraded to mountain os x lion and now my cac card reader doesn't work when I login in to ako. when I use the cac card login it doesn't read my id or the reader. what can I do to fix it because i've been googling and I haven't found a solution.

Try militarycac.com
There are both free and low priced commercial solutions for this and the Chief covers all options at his website.
-- Bill

Similar Messages

Inspiron 1520: memory card reader doesn't work in Windows 8

I upgraded my daughters Inspiron 1520 to Windows 8 and everything works well. The only problem we are having is the memory card reader does not work. Windows 8 recognizes it and shows the action center flag and advises us to install a new driver.. We install the driver R188776.exe, install it, and re-boot, but the memory card reader still doesn't work.. Is there another driver we can install?

Did you ever get this problem figured out? I had two hardware devices indicating problems when installing windows 8 on my 1520. Never actually used my card reader until I had everything up and running. I downloaded "Ricoh R5C832, R5C843, R5C833, v.1.0.1, A00 Ricoh R5C832, R5C843, R5C833, v.1.0.1, A00
R141246.EXE | Hard-Drive (582 KB)
Chipset|
Release date 26 Jun 2007
|Last Updated 03 Nov 2011"
It asked if I wanted to use it since I already had a newer driver in installed and I did it anyways. No more flags in device manager. Hope it helps.

Macbook Pro SD Card reader doesn't work

Hey all. A few weeks ago I plugged in my SD card like I've always done, but my SD reader didn't work. I've tried SMC reset and PRAM reset. Nothing works. The SD reader doesn't show up in apple system profiler nor in Disc Utility. I've tried different SD cards.
What can be done?

i tried that since Yosemite killed my SD Card reader... its so annoying. i don't even know if its a hardware or software issue. however, the check didn't worked... and all my 3 SD Cards are working well...

SD Card Reader Doesn't Work After Windows 10 Upgrade

I recently upgraded my laptop to Windows 10 and since then am unable to download pictures to my laptop (something I need and do all the time). My computer doesn't even recognize that I've put an SD card into it - no noise, no pop-ups, nothing. I also tried to plug my camera directly into the computer and go that route, but it won't work that way either. The SD card in the camera definitely has pictures on it, but it says the "folder is empty." This is a function that I love, need, and greatly miss. I did check to see if there were any software or driver updates available for my laptop on your support site, but Windows 10 isn't even an option in the operating system version drop-down... Please help!

Hi: I think most of the g6's have the Realtek card reader. Try the W10 card reader driver directly from Realtek. First driver on the list... http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownTypeID=3&GetDown=false

SD card reader doesn't work on Satellite C850-1CN after Win 8.1 install

Hi,
Since I installed Windows 8.1 on my computer Satellite C850-1CN ref. : PSKCAE my SD port does not work
I would like to know if there is a driver I need to download because I searched the site for a pilot port but in vain ...
Sorry for my English I speak French and I hope I'm in the right forum

Hi
You have to download and install the card reader controller driver for Win 8.1 system
This driver should be the right one:
[Card Reader Controller v 6.1.8400.30136 Windows 8.1 - 64 Bit|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=312&selProduct=7499&selSh ortMod=3417&language=13&selOS=all&selType=316&year upload=&monthupload=&dayupload=&useDate=null&mode= allMachines&search=&action=search&macId=&country=a ll&selectedLanguage=13&type=316&page=1&ID=88526&OS ID=46&driverLanguage=42]

Tecra M2 - Card reader doesn't work on Windows 7

Hi All
I've installed Win 7 on my TECRA M2 and everything worked fine at once ... except for one thing! The SD card reader is not recognized (worked well with XP).
Any hint please ?
Thanks in advance
JP

Tecra M2 is very old notebook model and it won't be Win7 supported.
In my opinion you should be happy that Win7 works well on this old notebook model. I cannot imagine card reader is so important and you cannot live without it.
Card reader is specific hardware component and, as you probably know, limited with reading SD cards with different capacities.
Maybe it sounds pessimistic now but I don't believe you will be able to find some "independent" driver for it.

Re: Satellite A300-1EG - Card reader doesn't work

Hi. Here is my problem:
My OS is WinXPSP2, all necessary drivers was installed including for Card reader controller. But when I insert SD card into my laptop, nothing changes. In Device manager "Secure Digital Storage Device" marked with "!".
What is the reason of such problem? If somebody knows, help me please.
Thank you for attention.
P.S. I am sorry if something is wrong in my English.

Can you try to install the notebook with the recovery disk? This would be important because so can be sure that all functions will work.
If doesnt work it seems like a faulty hardware or lets say a faulty card reader but try the recovery disk first.

My CAC Card reader is not working with Firefox

Using Win7 64 bit I can log in to secure site with IE 9 using my CAC Card but cannot log in to the same sites using Firefox 24.3 ESR. Is there a setting I need to change?

check to see if this helps you solve your problem
[https://militarycac.com/firefox.htm Firefox - CAC]

CAC Card Reader not working on 1 of 2 computers

I have an iMac 20-inch early 2009 and a MacBook Pro early 2011. I have installed OSX 10.8.5 on both. I followed the instructions to the letter from http://militarycac.com/ on both computers. I am able to use my SCR331 reader successfully on my MacBook Pro but am not able to use it on my iMac.
On the iMac:
I am able to see the SCR331 is conencted and recognized via System Information. The SCR331 version is 5.25 (updated firmward as suggested at ttp://militarycac.com/)
I attempted to install Centrify (which did not work) so I chose CaCKey instead, which installed just fine
When I plug the reader in, the light lights up steady. When I insert my CAC it does not blink like it should. The CAC certificates do not show up in Keychain either.
When I unplug the reader from my iMac and plug it into my MacBook Pro, it works just fine... I'm missing something somewhere........
Any help wold be greatly apprecitated! Thank you!

I forgot to add:
On my previous version of OSX (unfortunately I can't remember which I upgraded from) I was able to use my CAC Card reader on my iMac. So, after upgrading to 10.8.5 I was no longer able to use it with the OSX native software. I wonder if some of the settings I had to tweak (when using the old OSX) are affecting this problem now...
I had never tried using my reader on my MBP previously.

CAC card reader now works in Mac OS....

I finally got my CAC card reader to work in MAC OS. I used the scr3310 reader and MAC OS driver.
Now I need to find a Remote Desktop Connection (RDC) that can use the CAC reader. I have tried both 1.0.3 and 2.0.1 with no success.
Has anyone successfully used a RDC in MAC OS?
Thx !!
Mike

The MS RDP does not yet implement SmartCard enabling (which really ***** as the MS product seems pretty well done otherwise). I got CAC (via VPN) working using RDESKTOP via the installation procedures posted by TRON in August, 2008 under the topic heading "MS Remote Desktop and smart card reader". TRON's procedure makes the appropriate modification to the CONFIGURE file during the build and uses the OpenSource (SourceForge) implementation of RDESKTOP <rdesktop.sourceforge.net>, aka, <www.rdesktop.org>.
Here is a recap of TRON's procedure:
=====================================================
CARD READER ACTIVATION
1.) Plug in your card reader
2.) Open Terminal and run this command:
sudo pcsctool
3.) When prompted, enter your admin password. You should see:
Select the approprate token driver:
1. commonAccessCard.bundle
2. GSCISPlugin.bundle
3. mscMuscleCard.bundle
4. slbCryptoflex.bundle
Enter the number:
4.) Type "1" (without quotes) and press enter, and you should see something like:
Insert your token in: OmniKey CardMan 3121 00 00
Token support updated successfully !
5.) Keep your card reader plugged in and use rdesktop install instructions
RDESKTOP INSTALL
1. Make sure Xcode Tools is installed on your computer. It should be on your OS X install disk.
2. Find out where your X11 libraries are located:
-From the Finder menu, selct "Go" >> "Go to Folder..."
-Type (without the quotes) "/usr/X11", and click "Go"
You should see a bunch of folders. Make sure the "include" and "lib" folders are there. Otherwise you need to find out where the X11 "include" and "lib" folders are located on your computer.
3. Download rdesktop and place the (unarchived) rdesktop-1.6.0 folder on your Desktop
4. Open the X11 application (should be in your Utilities folder)
5. In the X11 window type the following (without the quotes):
"cd Desktop/rdesktop-1.6.0 && ./configure --enable-smartcard -x-includes=/usr/X11/include -x-libraries=/usr/X11/lib && make && sudo make install"
4. Hit enter. When prompted, enter your administrator password and hit enter.
rdesktop should now be installed in the following folder:
/usr/local/bin
So, to launch rdesktop with smartcard log in enabled, open the X11 application (or Terminal application) and type the following (without the quotes, and replace your.server.address with the server address):
"cd /usr/local/bin && ./rdesktop -r scard your.server.address"
Hit enter and it should launch a new X11 window that will try to access the remote server where you should be prompted for your PIN.
To explore more options with rdesktop, open X11 and type the following (without quotes):
"cd /usr/local/bin && ./rdesktop"
Hit enter and you should get a list of options available to rdesktop.
=========================================================
TRON's procedure works. I tried to get it working using the MACPORTS (formerly DarwinPorts) <www.macports.org> implementation of RDESKTOP. It actually uses the same OpenSource implementation, but the build procedures are completely different. The MACPORTS implementation would build properly and run. But I could not get the build to enable SmartCard. I tried modifying the PORTFILE by adding a new variant call that according to SourceForge (ticket#20664) should work:
variant smartcard description {enables smartcard forwarding} {
configure.args-append --enable-smartcard
It probably does work if you can get the CONFIGURE file appropriately. The variant call in the PORTFILE apparently does not do that modification on its own. MACPORTS builds and installs the various software "ports" (including RDESKTOP) by on-the-fly pulling the information form the TAR file into a temporary workspace. So you have to (somehow) make the modification happen as the CONFIGURE file is pulled into temporary workspace. I have not yet figured it out.
The advantage of the MACPORTS implementation is that there is a simple uninstall script built into all of the software "ports". The SourceForge version of RDESKTOP has no such uninstall capability (that I can find) built in. I would, therefore, prefer to use the much more elegant MACPORTS implementation, which leads to my two questions:
1. Has anybody found a straightforward procedure to enable SmartCards/CAC during the build of the MACPORTS version of RDESKTOP?
2. How do I safely and cleanly uninstall the non-MACPORTS <SourceForge.org> version of RDESKTOP?

How can I get a CAC card reader to work on a new iPad with a lightning connector?

I need to know if it is possible to use a CAC card reader for military use on a new iPad with a lightning connector. I saw the lightning to USB connector but wasn't sure it the iPad will support it.

Look at this link http://militarycac.com/mobile.htm
 Cheers, Tom

[SOLVED]Laptop Internal SD card reader no longer working

Two weeks ago I purchased a Raspberry Pi and set up my own SD card with Arch Linux ARM using the directions at http://archlinuxarm.org/platforms/armv6/raspberry-pi with the internal SD card reader on my laptop and had no issues. Today I decided to load up a XBMC distro to a new SD card, but my internal card reader doesn't seem to autodetect or mount my new card. I tried inserting my other card with Arch ARM that I know is a good card, but it no longer works with that card either. Here are all my logs that I could think of to post for any advice:
uname -r
3.9.8-1-ARCH
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation G73M [GeForce Go 7600] (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 01)
06:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
06:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
06:04.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)
lsusb
Bus 001 Device 002: ID 0c45:624f Microdia PC Camera (SN9C201 + OV9650)
Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 74.5G 0 disk
|-sda1 8:1 0 9.3G 0 part /
|-sda2 8:2 0 63.3G 0 part /home
`-sda3 8:3 0 1.9G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom
fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes, 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000f2f32
Device Boot Start End Blocks Id System
/dev/sda1 * 63 19535039 9767488+ 83 Linux
/dev/sda2 19535040 152296199 66380580 83 Linux
/dev/sda3 152296200 156301487 2002644 83 Linux
dmesg | tail
[17198.557922] mmc0: new SDHC card at address aaaa
[17535.391900] mmc0: card aaaa removed
[17537.984043] mmc1: new SDHC card at address aaaa
[18198.208331] usb 4-1: new full-speed USB device number 3 using uhci_hcd
[18199.855227] mmc1: card aaaa removed
[18221.345032] usb 4-1: USB disconnect, device number 3
[18473.771242] mmc1: new SDHC card at address aaaa
[20787.874847] mmc1: card aaaa removed
[21102.784624] mmc1: new high speed SDHC card at address e624
[21119.691467] mmc1: card e624 removed
It seems I have all the necessary information, but I am not sure where to go from here. It's obvious my laptop is detecting the card being inserted and removed, but the card reader is never listed in /dev so I can't mount it. It's listed under lspci but not under lsusb. I'm assuming that it was two weeks ago and that's why it worked, but I'm not sure how to get lsusb to detect it so it will work again. Thanks for any help you guys have.
Last edited by coolcashews (2013-07-06 00:32:55)

Thanks for your quick reply. Here are the logs you asked for:
lsmod | grep mm
mmc_core 94486 2 sdhci,sdhci_pci
usb_common 954 1 usbcore
pacman -Qi linux
Name : linux
Version : 3.9.9-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.9.9
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65511.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Wed Jul 3 16:00:01 2013
Install Date : Fri Jul 5 11:31:57 2013
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

T510 Windows XP 64bit - Multi Card reader no longer working

Just installed XP 64 bit from XP 32 because i finally got tired of windows only recognizing 2GB of RAM.
I have just discovered the multi card reader no longer works (it worked just a few days ago with the 32 bit xp).
i have tried uninstalling and reinstalling the driver (6hss03ww.exe - Ricoh Multi Card Reader Driver) several times, with no luck.
i do not have any uninstalled drivers, or highlighted items in the device manager.
Has anyone else ever has this issue, or can offer some advice? i am a bit at a loss... and ready to dump this thing out the window and buy a mac...

Hello mate,
Lenovo doesn't support windows xp 64-bit. If you have a look in the readme file it says
Added support for Microsoft Windows XP Professional x64 Edition (on ThinkPad
W510 only).
Install windows vista or 7 if you want a 64-bit OS.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

MacBook Pro SD card reader is not working

I have a MacBook Pro 13" Early 2011 with OS X 10.8.2. The reader has been working until now. I have tried several different cards with no luck. After searching the community board I tried both an SMC reset and a PRAM reset but no luck. (When I look in Disk Utility, I do not see the built in card reader.) Any suggestions?

Anyone else with card reader issues should read this page. Just because your card reader doesn't appear to be working or has mysteriously dropped off your system doesn't necessarily mean a logic board replacement. I've repaired several portables over the years that had been quoted for costly logic board replacements, when in fact the failures were relatively easy to resolve once you understood the real problem.
It's common belief a PRAM or SMC reset should fix all hardware glitches but sometimes it just doesn't go deep enough, as I found out with my 2011 MBP. Simply removing the battery was all it took to resurrect my seemingly dead card reader, when PRAM and SMC resets failed to have any impact on the problem.

I have an iPhone 4, an I moved to London an I bay a sim card both Doesn't work

I have an iPhone 4, an I moved to London an I bay a sim card both Doesn't work, the technic seas to me that the phones was block. how I can unblocked or you can do it

The carrier who locked the iPhone are the only source of an unlock
Your Carrier in your home country ??

Cac card reader doesn't work on my mac now

Similar Messages

Maybe you are looking for