CAC for MAC, webmail access
Similar to many folks, I'm having lot's of trouble getting my CAC to work on MAC and to get NMCI working. Support from anyone would be appreciated.
Summary of my situation:
1) OS X 10.4.11
2) Card reader CSR3310 (_I can see the certificates in keychain_)
3) I did not not update firmware for CAC reader, since CSR3310 has it already
4) I ran the pcsctest. The results were:
MUSCLE PC/SC Lite Test Program
Testing SCardEstablishContext : Command successful.
Testing SCardGetStatusChange
Please insert a working reader : Command successful.
Testing SCardListReaders : Command successful.
Reader 01: CCID Smart Card Reader 0 0
Enter the reader number : 1
Waiting for card insertion : Command successful.
Testing SCardConnect : Command successful.
Testing SCardStatus : Command successful.
Current Reader Name : CCID Smart Card Reader 0 0
Current Reader State : 34
Current Reader Protocol : 0
Current Reader ATR Size : 12
Current Reader ATR Value : 3B 7D 96 00 00 80 31 80 65 B0 83 11 13 AC 83 00 90 00
Testing SCardDisconnect : Command successful.
Testing SCardReleaseContext : Command successful.
PC/SC Test Completed Successfully !
5) Trying to a create ID preferences for each certificate. When I enter the url (https://webmail.east.nmci.navy.mil/), name, and a password --- and then hit add -- I get the following error: "An error has occurred to add an item to the current keychain. The specific item does not appear to be a valid keychain item."
I'M AT A POINT WERE I CAN'T INVEST MORE TIME ON THIS ... NEED HELP.
THANKS in advance, DP
Hi DP, and a warm welcome to the forums!
The easy way...
http://www.tuaw.com/2008/05/28/cac-for-mac/
Another possible route...
http://discussions.apple.com/message.jspa?messageID=7337383
Similar Messages
-
I am having trouble getting mail from the shaw server that my new iMac is connected to. I have to reboot the system to get Outlook for Mac to access the system and obtain new messages. Any ideas? Its at the point where I have started using the PC again as its less trouble.......
In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
See "Firefox connection settings" in [[Server not found]]
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"<br />
If you do not need to use a proxy to connect to internet then select No Proxy -
I just went to my .mac webmail on my computer, and moved the slider that separates the email messages from the body of the messages... that little horizontal bar.
I moved it so there was equal space for messages and text.
Apparently .Mac remembers these settings, because when I visit it now on my iPod and click on a message, I can see all of the text. It still does not open in a separate window.. but at least you can read email.
Sending email works fine too... you just can't use the autofill function when entering an email address.. or use address book (the link in webmail). You have to manually enter the email addresses.
Message was edited by: SandmanI agree, and have posted as much elsewhere, but if Apple cared about users being able to do any sort of e-mail from the touch, then they would have included the mail application directly.
Cheers
Russell -
ITunes 8.2 for Mac: cannot access iTune
Hi
I need help. I am using a Mac OS X 10.5.7 with iTunes 8.2.
I connect to the internet using a wireless connection and i can connect to the internet using internet browser etc but when i try and connect to the iTunes store i cannot.
I have tried to fix this problem by:
a.) allowing all connections through the firewall
b.) allowing application access through keychain
nothing works.
Can someone help me?Lost 1985:
You are not alone.
I have had the same problem since June 8t/09, after I downloaded iTunes 8.2 onto my MacBook Pro running OS 10.5.7.
I immediately posted my situation and titled it "*_iTunes 8(x) + OS 10.5.7 NOT Compatible??_*"...
here at the"iTunes for Mac->Using iTunes for Mac" Support pages:
http://discussions.apple.com/thread.jspa?threadID=2031565&tstart=0
And here, at "iTunes for Mac-> Installing & Upgrading iTunes for Mac":
http://discussions.apple.com/thread.jspa?threadID=2031631&tstart=0
It seems there are +a lot+ of unhappy peeps who downloaded iTunes 8.2 on their OS 10.5.7 Macs and are having all sorts of probs.
*I STRONGLY SUGGEST that we DIRECTLY LET APPLE KNOW by going to their iTUNES FEEDBACK PAGE and EMAILING THEM DIRECTLY -- and then RE-EMAILING them until they get the message, or um, messages.*
http://www.apple.com/feedback/itunesapp.html -
Sophos for Mac on-access scanning disabled.
While it may have fixed itself for the previous user, it hasn't for me. I've uninstalled and reinstalled Sophos. Still won't let me turn on access scanning. And it won't set any preferences I try. Says sophos failed to set preferences. There seems to be no way to turn off on access scanning. It says "on access scanning is turned off. The only button available is grayed out, but says "stop scanning".
Hello, Yesterday my sophos on access scanning became disabled. I cannot change anything in the preference since they are grayed out. I have a MacBook Pro with Maverick OS X 10.9.2 and I am using Sophos Anti Virus version 8.0.23. This is what the log says: com.sophos.intercheck: Info: On-access scanner started at 07:11 on 23 March 2014
com.sophos.intercheck:
com.sophos.autoupdate: Updating catalogue information at 09:21:12 23 March 2014
com.sophos.autoupdate: Catalogue updated at 09:21:13 23 March 2014
com.sophos.autoupdate: Download started at 09:21:13 23 March 2014
com.sophos.autoupdate: Download completed at 09:21:22 23 March 2014
com.sophos.autoupdate: Software is up-to-date at 09:21:25 23 March 2014
com.sophos.autoupdate: Info: Checked primary server at 09:21 on 23 March 2014
com.sophos.autoupdate: Sophos Anti-Virus is up to date
com.sophos.autoupdate:
com.sophos.autoupdate: Updating catalogue information at 15:22:38 23 March 2014
com.sophos.autoupdate: Catalogue updated at 15:22:39 23 March 2014
com.sophos.autoupdate: Download started at 15:22:39 23 March 2014
com.sophos.autoupdate: Download completed at 15:22:50 23 March 2014
com.sophos.autoupdate: Update started at 15:22:50 23 March 2014
com.sophos.intercheck: Fatal Error: The main virus data file is missing
com.sophos.intercheck: Sophos Anti-Virus cannot continue
com.sophos.intercheck:
com.sophos.intercheck: Fatal Error: The main virus data file is missing
com.sophos.intercheck: Sophos Anti-Virus cannot continue
com.sophos.intercheck:
com.sophos.intercheck: Fatal Error: The main virus data file is missing
com.sophos.intercheck: Sophos Anti-Virus cannot continue
Can you please help me with this? Thanks. -
How to Format Toshiba Hard-Drive for Mac with Parallels?
Hello,
I recently bought a Toshiba Hard-Drive with the following features:
500GB
It is a Canivo Basics 3.0
It is USB 3.0 and 2.0 portable hard drive
It has already been formatted NTFS for Windows XP, Vista, 7, and 8
The box says that it can be reformatted for Mac
I have a Macbook Pro with Retina Display that I bought this year in late March/early April.
It runs OS X Mavericks, and Parallels Desktop 9 for Mac.
I would like to reformat it so that I can use it on my laptop both with Windows and Mac OS at the same time. I do not wish to use a partition as I want to access the hard drive through Mac and Windows at the same time on my laptop and I also want to be able to access the Mac things on a Windows computer and vice versa.
I have never formatted a hard drive before, and I would like to use a completely safe software, or no software at all, if it is possible.
I am sorry but I don't have a very high knowledge of this.
Thanks,
Sandy-WoodIt would be easier, using Parallels, just to format the drive for "Mac OS Extended (Journaled)". You can see it both in the Windows/Parallels and the Mac side. Leaving it formatted as NTFS is not going to allow you to access (write to) the drive unless you use third-party software. Formatting it for Mac lets you use it, as I said, on both the Parallels VM and the Mac side.
If you were using Boot Camp, I would advise leaving it formatted as NTFS and purchasing NTFS for Mac to access the drive on both OS's. You can mitigate that by formatting the drive for Mac:
Good luck,
Clinton -
Public folders and outlook 2011 for Mac
Hi
I can' find the clear answer for the following. I appreciate your response
1. Pure exchange 2013 with public folders. Does outlook 2011 for MAC support public folders in this scenario
2. exchange 2013 in coexistence with exchange 2010, 2007. Does outlook 2011 for MAC support accessing the legacy public folders in this scenario?
Thank youHow about these links? They say that outlook 2011 does NOT support modern public folders in 2013 (Question 1)
http://manageweb.it-radix.com/support/kb/default.asp?id=2128
http://hosting.intermedia.net/support/kb/default.asp?id=2408 -
Outlook 2010 for Mac cannot send.
I'm having a related, but slightly different problem: Just switched from a PC with Outlook to new iMac with core i5 and OS X (10.6.5) and Outlook 2010 for Mac to access my Verizon email. Incoming mail is 100% successful, but have been unable to send a single message. The Outlook error message says it cannot connect to Verizon's outgoing sever (outgoing.email.net), because it requires server authentication. All account setting are identical to instructions.
I have researched the Microsoft Outlook forums for server authentication issues and found primarily resolutions and recommendations to switch to various different port numbers. Tried all of these suggestions with no success. So am still looking for an assist. Is this the right thread to make that query? If not, can any of you direct me to the appropriate discussion group? Thank you!
nullHi RonMVR,
Which version of exchange do you use?
About how to configure the OUTLOOK 2011 using kerberos, you could refer to below:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=aae7f434-d3c9-441a-98bf-7fc5b1a1df18
Regards!
GavinPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Remotedesktop connection for mac
Hi there,
I frequently used RDV (Remote Desktop Connection for Mac) to access my old PC with Windows XP over my WLAN network and via cable over LAN from my mac book pro.
Now i bought a mac mini (latest) and installed Win7 with bootcamp. I need to access it remotely from my mac book pro so i tried Remote Desktop Connection. It works over my local WLAN network, BUT it dosn't work over LAN.
Which are the correct settings to use a LAN cable and the RDV that it works properly?
mac book pro with OSX ---- LAN cable ---- mac mini with win7 (bootcamp)
Thanks for your help!
AndyYeah I'm aware of this fact. It seems to me that you don't have that much experience with networks.
The IP address I mentioned was the IPv4, I set manually to 10.0.0.1 /255 255 255 0 on one computer, and to 10.0.0.2 on the other. The sub net has to be the same that they are able to to talk to each other.
I also found the error, then when i send a ping, the computers were connected. So my other guess was, that it could be a firewall problem, and indeed it was. I allowed the remote desktop for everyone in the firewall settings and now MS RDC is able to connect over LAN to the mac mini. -
I am using a verizon email address and microsoft office for mac outlook program to manage my emails. Does any one know if the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?
This is the Microsoft forum site that parallels what Apple has:
Office for Mac forums
It's not uncommon for MS employees who work with the Mac side of the business to help there. All in all a useful resource for Office:Mac -
How do i get rid of the pop ups that are constantly popping up on my mac. Everytime i search for anything on google an ad for mac keeper comes up and every time i access Netflix another stream of ads pop up... Do i have a virus HELPPPPPP
You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
How do i access word for mac on my macbook air?
how do i access word for mac on my macbook air?
Purchase it. Here's one link to an Amazon site to buy one of the many Office configurations:
http://www.amazon.com/Office-Mac-Home-Student-2011/dp/B003YCOJA8/ref=sr_1_3?s=so ftware&ie=UTF8&qid=1349217216&sr=1-3&keywords=office+for+mac
You would receive Office on a CD, and need a disk drive for your MacBook Air to access so you could download the software. -
Problems accessing info in Outlook for mac
Hi,
I have used Outlook for Mac ever since I bought my first macbook pro and it has been fine, but since I upgraded to my macbook pro and migrated files across to the retina, upgraded to Mavericks etc, I don't seem to be able to access files that should ahve trnasferred across. the file structure are there but when I try to open something, the folder looks empty. Going into Get Info and I get "outlook can't open the file because it is 'not associated with the deafult identity'.
I know the first reaction of apple is - this is not an apple product so we don't help, but I think this is a cop out as in this modern world where we're trying to get stuff to work seamlessly, that shouldn't really make a difference and in any event Apple were happy to sell me Outlook when I bought the laptop. I will be posing the same question in the microsoft community. But does anyone else recognise this problem and have a solution in language that someone who isn't very techy can understand?reluctant apple wrote:
I know the first reaction of apple is - this is not an apple product so we don't help
These are user to user forums, and I think if anyone can help they will, regardless of whether the product is made by Apple or not. But as a practical matter, only a tiny % of the people reading your message here have any experience with outlook, while every person reading your message at the MS forum will have this:
http://answers.microsoft.com/en-us/mac/forum/macoutlook
Also this is a hardware forum, and your problem is strictly software and is not related to the kind of Mac being used. So a better place to ask would be
https://discussions.apple.com/community/mac_os/os_x_mavericks -
I have a small business and I was thinking about converting over to Mac's for the office! We currently have a PC with XP set-up! But I had just finished putting an Access database together and really like the layout, I spent alot of time putting it together. I have an iMac at home but have yet to try to open the DB there. But I just noticed last night that I don't even have Access for Mac at home and I have looked at Mactopia and there isn't a listing for Access! So is there another way to open this DB? with another program?
NeoOffice does have a database component which is similar to Microsoft Access, however is is not compatible with Microsoft Access.
NeoOffice databases use a standard dbase file format, which offers limited database functionality. It will not open a MS Access database file.
This format is proprietary to Microsoft.
http://neowiki.sixthcrusade.com/index.php/CreatingaDatabase -
Build native bundle for mac (.app/.dmg) has no file right to access files....
Hi,
today I build my first native bundle (.dmg) for Mac.
Everything works very well except that my running app has no access to local files. The files are shown but the app does not have the right to read.
The windows version has no problem to access local files.
Any ideas what i have to add for Mac.
Thanks
Michael
Buildscript:
<project name="JavaFXSample" default="build and deploy" basedir="."
xmlns:fx="javafx:com.sun.javafx.tools.ant">
<target name="build and deploy">
<property name="applet.width" value="500"/>
<property name="applet.height" value="500"/>
<property name="application.title" value="ZP_Prototype2"/>
<property name="application.vendor" value="TestVendor"/>
<property name="build.classes.dir" value="/Users/mb_ta_michi/NetBeansProjects/ZP_Prototype2/build/classes/"/>
<property name="basedir" value="/Users/mb_ta_michi/NetBeansProjects/ZP_Prototype2/"/>
<property name="dist.dir" value="/Users/mb_ta_michi/NetBeansProjects/ZP_Prototype2_BUNDLE/"/>
<property name="javafx.lib.ant-javafx.jar" value="/Library/Java/JavaVirtualMachines/jdk1.7.0_25.jdk/Contents/Home/lib/ant-javafx.jar"/>
<taskdef resource="com/sun/javafx/tools/ant/antlib.xml"
uri="javafx:com.sun.javafx.tools.ant"
classpath="${javafx.lib.ant-javafx.jar}"/>
<fx:application id="zpAppID"
name="ZP_Prototype2"
mainClass="zp_prototype2.ZP_Prototype2"
/>
<fx:resources id="appRes">
<fx:fileset dir="./../misc/libs2add" includes="*.jar"/>
<fx:fileset dir="${dist.dir}" includes="*.jar"/>
</fx:resources>
<fx:jar destfile="${dist.dir}/ZP_Prototype2.jar">
<fx:application refid="zpAppID"/>
<fx:resources refid="appRes"/>
<manifest>
<attribute name="Implementation-Vendor"
value="${application.vendor}"/>
<attribute name="Implementation-Title"
value="${application.title}"/>
<attribute name="Implementation-Version" value="1.0"/>
</manifest>
<fileset dir="${build.classes.dir}"/>
</fx:jar>
<fx:deploy width="${applet.width}" height="${applet.height}"
outdir="${dist.dir}"
embedJNLP="false"
outfile="${application.title}"
nativeBundles="all"
>
<fx:application refId="zpAppID"/>
<fx:resources refid="appRes"/>
<fx:info title="${application.title}"
vendor="${application.vendor}"/>
<!-- Custom JVM setup for application -->
<fx:platform>
<fx:jvmarg value="-Xmx512m"/>
<fx:jvmarg value="-Xms512m"/>
<property name="my.property" value="something"/>
</fx:platform>
</fx:deploy>
</target>
</project>Exact same problem here, and no workaround.
Windows Phone 8.1; WindowsPhone.app 3.1.1, iTunes 11.2.2, OSX 10.8.5
The following solution doesn't work on my Mac:
http://forums.wpcentral.com/mac-os-x/223845-windows-phone-app-not-syncing-itunes.html
Maybe you are looking for
-
Vkoa GL changes during in process sale order
Dear sapient As per our client requirement GL account in VKOA for KOFK(Make to order scenario) needs to be changed. I would like know the impact of GL account determination on open sale order ,partial sale order, because system has already derived
-
I can't use the old Apple id and Apple password on my new Iphone 6 - I can use the new ones. But I can't access the cloud in the meantime. The iTunes and App Stire has the new Apple ID, but I can't get into the settings to change it on the iCloud. It
-
How do you configure the server in this situation?????????????
Hi, We have Oracle 10.2 and Windows 2003. We have Oracle on Cluster (with Windows software). When the System are without cluster all its OK!!!!!! We have 2 Resources Cluster Group: Oracle and Applications. We have Oracle in Oracle cluster group. We
-
[JS][CS3-CS5] anchored objects/inline back to text
g'day there. been handed a reformatting job where the client has supplied text in word with additional textframes (they have made callouts next to their body text), meaning when the text is imported into indesign, the text has hundreds of anchored ob
-
Error when trying to email report using Analyzer for Excel template
I have a report for which I have created both "RTF" and "Analyzer for Excel" based templates. I can email the report using the RTF template, but when I try to email it using the A4E template (using the 'Send' button from the report screen), it never