Cacao agent is not available

I have installed dsee6.1 binary with agent running on default port 11162. I also installed dscc6.1 on the same server (host).
When I was trying to create a ds instance through dscc, it occured a problem as following:
Could not contact the DSCC agent on *****. Use the command cacaoadm to check that the DSCC agent is installed and running on port 11162.
I am very surprise to see this error message coming out, since I have double check that the agent is running and port is 11162. However, i can't create the ds through the dscc.
The following is the params output from cacaoadm:
cacaoadm list-params
snmp-adaptor-port=11161
snmp-adaptor-trap-port=11162
jmxmp-connector-port=11162
commandstream-adaptor-port=11163
rmi-registry-port=11164
secure-webserver-port=11165
java-flags=-Xms4M -Xmx64M
java-home=/iplanet/servers/v6/jre
jdmk-home=/iplanet/servers/v6/dsee6/private/lib/..
nss-lib-home=/iplanet/servers/v6/dsee6/private/lib
nss-tools-home=/iplanet/servers/v6/dsee6/bin
retries=4
enable-instrumentation=false
network-bind-address=0.0.0.0
And, the following is message when I check the cacao agent:
/dscc6/bin>./dsccsetup status
Sun Java (TM) Web Console is not installed
DSCC Agent is registered in Cacao
DSCC Registry has been created
Path of DSCC registry is /iplanet/servers/v6/var/dscc6/dcc/ads
Port of DSCC registry is 3998
Any help will be appriciated!
Thanks!

So the question is why the dscc can't find the running cacao instance using default port?
After I read the installation guide again, I have something unsure in my mind:
I have 5.2 running on this server, which I did not shutdown when installing 6.1. Do I have to shut them down while installing? Can two different version of DS/DPS co-exist in one box?
As I knew, older version than 6.x can co-host, but not sure about the new version.
I have successfully tested v6.1 in my sandbox, then I moved to the dev region. In sandbox server, I don't have any other version running, so I can't tell if the v5.2 would be the factor.
Please shed anylight.
Thanks!

Similar Messages

Agent updates not available after restoring DPM database

Hi,
I am using DPM 2012 R2 which I have recently successfully updated to version 4.2.1297.0 (A hotfix installed to resolve an issue with Rollup 5).
I updated 3 agents successfully and planned to do the remaining 8 at a later date. However after updating the first 3 I was trying to resolve a reporting issue which I did successfully and I carried out a DPM database restore in the process followed
by a DPMsync -sync command.
I am now planning to update the remaining 8 agents but under the management tab the agent status is now showing as OK instead of Update Available as it did previously before the restore. I have checked the protected clients and they do not have the 4.2.1297.0
version installed (I checked this in case the installation had occurred). I then decided I would try and re-install the hotfix on the DPM server (kb3040326) but it seems I can't first uninstall the update on it's own so will have to uninstall DPM altogether.
I have tried to reinstall the hotfix again on the DPM server without removing it first and I get a message advising:
"A required hotfix KB3021791 is missing. Install it from http://support.microsoft.com/kb/3021791"
This update refers to Update Rollup 5 for DPM 2012 R2 which, again, is already installed on the DPM server and appears under Add/Remove programs.
It seems that since the restore the DPM server is aware that the Rollup and subsequent hotfixes are installed but the DPM application is not (although when I click the About DPM button, the version is 4.2.1297.0). I am unable to update the agents through
the DPM GUI with the latest hotfix as it is not available to them and I am reluctant to install the latest version directly onto the clients without sorting this problem out first.
If anyone has any advice that would be great,
Thanks.

This isn't a bug in Leopard or it's recent updates so it's not something you should expect to see fixed in a subsequent release. However, you're not the only one who has found there to be problems after an update and assumed the update was responsible when it's either coincidental, or simply highlighted a problem that existed on the system previously.
First thing to try when any device or ports appear to vanish on the system is to perform an SMC reset:
-From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
-Unplug all cables from the computer, including the power cord and any display cables.
-Wait at least 15 seconds.
-Plug the power cord back in, making sure the power button is not being pressed at the time.
-Then reconnect your keyboard and mouse to the computer.
-Press the power button on the back to start up your computer.
Since the SMC (System Management Controller) looks after all the internal devices, when it goes wrong it can cause very bizarre apparent failures! Resetting usually resolves these. Give that a try and post back to let us know.

CCMSR Agent -- Executable not available

Hi Experts,
I`m trying to install ccmsr agent in visual administrator > monitoring-> ccmsagent , but the following message appears:
*Dialog Instance : cmap2_CMP_00*
*Instance Profile Information /usr/sap/CMP/SYS/profile/CMP_D00_cmap2 is valid*
*Agent Configuration File Information*
*/usr/sap/ccms/CMP_00/sapccmsr/csmconf is valid*
*Agent Executable File Information*
*not available*
*Dialog Instance : cmap1_CMP_00*
*Instance Profile Information*
*/usr/sap/CMP/SYS/profile/CMP_D00_cmap1 is valid*
*Agent Configuration File Information*
*/usr/sap/ccms/CMP_00/sapccmsr/csmconf is valid*
*Agent Executable File Information*
*not available*
I download the ccmsr SAR file and descompress but I dont know why I can solve this.
On the oher hand I don`t know why the central instance is not showing in the message, I want to register it too.
Regards
Edited by: jorge velasquez on Jul 13, 2009 3:41 PM
Edited by: jorge velasquez on Jul 13, 2009 3:41 PM

Hi,
Please check whether the below sequence of activities were followed -
1] Generating the CSMCONF file on the Solution Manager System
2] Unpacking the CCMAGENT file
3] Installing the SAPCCMSR Agent (making sure the owner of the file is the <sid>adm account for the current
system.)
4] Register the agent using visual administrator - making sure the correct csmconf file is selected; and the local/CEN user id password are correct.
Then check the status of the registration using,
sapccmsr -status -j2ee pf=/usr/sap/**/SYS/profile/**
Can also try registering at OS level using,
sapccmsr -R [-f <config file>] [[-j2ee] pf=<complete path of profile of managed instance>]
Hope this helps!
Regards,
Aditya

Could Calendar services not available after reboot be LDAP problem?

I followed this installation guide:
https://wikis.oracle.com/display/CommSuite7U2/Communications+Suite+on+a+Single+Host+%28Linux%29#CommunicationsSuiteonaSingleHost%28Linux%29-InstallingCommunicationsSuite7Update2Software
I have successfully installed and set up the Oracle UCS Sun7 update 2 server. Calendar works ( if I don't reboot the server ).
However, when I reboot the server, Calendar service is unavailable.
Important information for when I installed Oracle UCS sun 7 update 2 by following the installation guide:
I have noticed when browsing through the folders, that there was already a 'dsee6' folder for the Oracle Linux I started from. Following the example installation for the Oracle Linux 5 with GlassFish install, I was instructed to download a new Directory Server. Following the instructions on page 7 of the install guide listed above, I made another folder 'dsee7'. I am wondering if I should never have downloaded this new Directory Server as instructed on page 6 "Get the Software". The install guide actually does not mention where to get the Directory Server from, so I just went to the edelivery site and figured it out myself. Anyways, under the "Installing and Configuring Directory Server" section, #3, I was instructed to "mv dsee7 /opt/sun/directory". In this folder, /opt/sun/directory/bin, there will be "./dsadmin" utility that can be ran. This is used to do many things with the Directory Server including starting it. Here is how I started it:
cd /opt/sun/directory/bin
./dsadm create /var/opt/sun/directory/dsins1
./dsconf create-suffix "0=isp"
Also, I downloaded the Directory Server from edelivery - Oracle Directory Server Enterprise Edition 11gR1 Patch Set 1 for Linux x86-64
Then, I ended up running to get it set up:
./dsccsetup ads-create
./dsccsetup war-file-create
$ ./dsccsetup cacao-reg
./dsccsetup status
Then, it looked like the dcss agent is registered in cacao.
So, if we forward ahead to page 9 of the install guide, "Preparing the Directory", I ran this and prepared the directory. After I finished installation, I could restart the Directory Server with no problems, as long as I did not reboot the machine. I would restart the Directory Server like so:
cd /opt/sun/directory/bin
./dsadmin stop-domain domain1
./dsadmin start-domain domain1
However, if I rebooted the machine, I could still start and stop the Directory Server as noted. But, the Calendar Services were not available.
The only reason I wonder about this LDAP Server possibly being the cause of this is because I had at one point configured the services to start on boot. I followed these instructions:
https://wikis.oracle.com/display/CommSuite7U2/Start+and+Stop+Scripts+for+Communications+Suite+%28Linux%29
I am using a VMSphere client to host this set up. So, since that point of configuring the services to start up, I have rolled the snap shot back so that the services are no longer set up to start on boot. But, when they were, and I rebooted the machine, I could see ldap 389 errors all over the place. So, that lead me to roll my snap shot back in effort to try and fix the ldap errors. I no longer get LDAP errors since I rolled my snap shot back. But, like I said, I no longer have any of the services, including the LDAP, to start on boot as noted in the above link that instructs us how to do this.
After reboot, I run these commands to get the server up and running:
Start GlassFish server:
cd /opt/sun/SUNWappserver/bin
./startserv
Start web ( Messaging Server I think ):
cd /opt/sun/comms/messaging64/bin
./start-msg
Start LDAP ( Directory Server )
cd /opt/sun/directory/bin
./dsadm start /var/opt/sun/directory/dsins1
Start Mysql
cd/etc/init.d
./mysqld start
All of those commands complete without problem. I can log into the convergence web, I can hit the delegated administrator, I can log into the GlassFish admin console, and I can see my calendar folder when I hit it in the web ( http://myServer.com/davserver/dav/home/userName/calendar/ ).
So, in summary, I am wondering if anyone knows if this supposed second Directory Server is causing my problems since I started with Oracle Linux 5 and Oracle Linux 5 appeared to have the folder dsee6 already installed with it. Could this be why my calendar services are not starting after reboot but are working before reboot?
( Also, all of my posts keep getting deleted. Can someone please email me if someone from Oracle is deleting my posts and tell me why they are getting deleted? )
Edited by: ntfytim16 on Mar 5, 2012 7:41 AM
Some of my steps were out of order. Cleaned them up so it is easier to understand.

Here is my error0.log which is in the /var/opt/sun/comms/davserver/logs folder:
=========================
Last packet sent to the server was 0 ms ago.
SEVERE [2012-03-01T05:10:26.033-0500] <...DavServer.loadBackend> failed to instantiate or create backend com.sun.comms.davserver.backends.BackendException: Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
Last packet sent to the server was 0 ms ago.(OPERATION_NOT_SUPPORTED)
INFO [2012-03-01T05:10:26.033-0500] <...DavServer.loadBackend> Loading backend ischedulebackend with backendid ischedulebackend
INFO [2012-03-01T05:10:26.034-0500] <...DavServer.loadBackend> JDBC JNDI Name = jdbc/ischedulebackend
SEVERE [2012-03-01T05:10:26.177-0500] <...JdbcBackend.queryDatabaseType> Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
Last packet sent to the server was 0 ms ago.
SEVERE [2012-03-01T05:10:26.177-0500] <...DavServer.loadBackend> failed to instantiate or create backend com.sun.comms.davserver.backends.BackendException: Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
Last packet sent to the server was 0 ms ago.(OPERATION_NOT_SUPPORTED)
INFO [2012-03-01T05:10:26.209-0500] <...DavServer.loadBackends> iSchedule enabled
WARNING [2012-03-01T05:10:26.209-0500] <...DavServer.loadBackends> iSchedule URI is configured but can't find ischedule backend.
SEVERE [2012-03-01T05:10:29.567-0500] <...LDAPSingleHostPool.buildConnection> buildConnection: got LDAPException while connecting to Pool number:0. Host=myServer.com :netscape.ldap.LDAPException: failed to connect to server ldap://myServer.com:389 (91)
SEVERE [2012-03-01T05:10:29.568-0500] <...LDAPSingleHostPool.buildConnection> buildConnection: got LDAPException while connecting to Pool number:0. Host=myServer.com :netscape.ldap.LDAPException: failed to connect to server ldap://myServer.com:389 (91)
WARNING [2012-03-01T05:10:29.568-0500] <...LDAPFailoverPool.getConnection> Fatal Error: All LDAP servers are down.
======================
Does that look like an LDAP issue to you?
"Fatal Error: All LDAP servers are down."
Edited by: ntfytim16 on Mar 5, 2012 10:13 AM
Changed one server address

Grid Control performance tab not available when on the target home of ASM

I noticed recently that the "Performance" tab/link is not available when you are using 10g Grid Control and you are on the home page of an ASM instance. Can this be explained?

Hi MarGur
I try to help you. The OEM Grid Control in some times not discover the Oracle 9i databases and you must to add manually.
First, check in your target machine that the user owner of agent software have rights of read and write in the ORACLE_HOME directories of Oracle 9i databases.
Go to Grid Control Console
Select Targets ---> Databases
Press Add --> Select the host ebisdb2.oneshield.com and press continue
The automatic discover process begin. When finished is very normal that nor discover the Oracle 9i databases. You press the Add manually button
in the page that appear you must entry all the configuration information of database:
ORACLE_HOME directory
DBSNMP USER
DBSNMP PASSWORD
HOSTNAME
PORT
SID
Check that the dbsnmp user in your database is unlock and press the TEST button to verify the connection work fine.
After this many windows appear of configuration process, and you will put the sys password and host credentials.
If you have problems, tell me
Regards

My youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome

my youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome. At times it also say QuickTime Player can't open "video.3gp". and
The file may be damaged or may not be a movie file that is compatible with QuickTime Player. when i try to open a video on youtube on safari

I too am having the same issue as the OP.
Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

The pool managing the instance is not available or the location monitoring object cannot be found - discovery progress

Hi,
I have installed scom 2012 with integrated SP1 on windows server 2008 R2 with integrated SP1 and SQL 2008 R2 SP2.
The Problem I have is when trying to discovery I´m getting this error:
The pool managing the instance is not available or the location monitoring object cannot be found
Date: 05.03.2013 14:44:22
Application: Operations Manager
Application Version: 7.0.9538.0
Severity: Error
Message:
Microsoft.EnterpriseManagement.Common.LocationObjectNotFoundException: The pool managing the instance is not available or the location monitoring object cannot be found.
   at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
   at Microsoft.EnterpriseManagement.Common.Internal.AdministrationServiceProxy.LaunchDiscovery(Guid batchId, IList`1 jobDefinitions)
   at Microsoft.EnterpriseManagement.Administration.ManagementServer.BeginExecuteWindowsDiscovery(IList`1 discoveryConfigurations, AsyncCallback callback, Object state)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.DiscoveryProgress.<>c__DisplayClass7.<SubmitTask>b__3(Object , ConsoleJobEventArgs )
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
How can I solve this? Thank you.
gruss Daniel Ovadia MBSS - Microsoft Dynamics CRM MCNPS

See the article I wrote/posted here about monitoring Domain Controllers: http://adinermie.wordpress.com/2014/02/26/scom-agent-grayed-out-when-trying-to-monitor-domain-controllers/.
And to add an account to Local Administrators role on a Domain Controller, follow this:
Open a command promt using the "Run as administrator" function and then run the following command.
net localgroup Administrators /add {domain}\{user}

Oracle 11g Installation DBCA ORA-01034: Oracle Not Available

I have two oracle databases installed (using the default settings in dbca) and running on a Windows 2003 R2 server, already.
However, when I try and create a third using the defaults, after 2%, dbca receives an ORA-01034: Oracle Not Available and stops the creation process.
I've searched 16 hours or so for a similar issue, but haven't had much luck other than to check sqlnet.ora for OS authentication, the registry keys, and tnsnames.ora.
I've looked at the trace log for dbca a few times for the different attempts at creating a new database, and they tend to differ when the error is generated.
Looking at Event Viewer, I noticed that connection events occurred during installation, and that for at least one case, CONNECT / AS SYSDBA occured 3 times before the error was generated.
I've made more than 3 databases on another machine (XP - not server 2003), without any issue, but it seems odd that this error would be because of server 2003.
I'm fairly inexperienced with configuring databases for Oracle, so please excuse my ignorance.
Here's a log file to accompany the issue:
[main] [14:59:16:460] [DBCAWizard.removePageFromList:1318] DBCAWizard->removePageFromList: The page to be removed = NetworkConfPage
[main] [14:59:16:460] [DBCAWizard.removePageFromList:1318] DBCAWizard->removePageFromList: The page to be removed = NetworkConfPage
[main] [14:59:16:460] [DBCAWizard.removePageFromList:1318] DBCAWizard->removePageFromList: The page to be removed = NetworkConfPage
[main] [14:59:16:460] [DBCAWizard.removePageFromList:1318] DBCAWizard->removePageFromList: The page to be removed = NetworkConfPage
[main] [14:59:16:460] [DBCAWizard.removePageFromList:1318] DBCAWizard->removePageFromList: The page to be removed = NetworkConfPage
[main] [14:59:16:460] [DBCAWizard.removePageFromList:1318] DBCAWizard->removePageFromList: The page to be removed = NetworkConfPage
[main] [14:59:16:460] [DBCAWizard.removePageFromList:1318] DBCAWizard->removePageFromList: The page to be removed = NetworkConfPage
[main] [14:59:16:460] [CommandLineArguments.process:639] CommandLineArguments->process: number of arguments = 0
[main] [14:59:16:976] [Host.checkOPS:2290] Inside checkOPS
[main] [14:59:16:976] [Host.checkOPS:2302] Trying to check cluster existence
[main] [14:59:17:38] [Library.getInstance:106] Created instance of Library.
[main] [14:59:17:38] [Library.load:206] Loading orauts.dll...
[main] [14:59:17:38] [Library.load:212] oracleHome D:\app\Administrator\product\11.1.0\db_1
[main] [14:59:17:38] [Library.load:227] Property oracle.installer.library_loc is set to value=D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Library.load:229] Loading library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\orauts.dll
[main] [14:59:17:54] [Library.load:262] Loaded library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\orauts.dll from path=
D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Library.load:206] Loading MSVCR71.dll...
[main] [14:59:17:54] [Library.load:212] oracleHome D:\app\Administrator\product\11.1.0\db_1
[main] [14:59:17:54] [Library.load:227] Property oracle.installer.library_loc is set to value=D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Library.load:229] Loading library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\MSVCR71.dll
[main] [14:59:17:54] [Library.load:262] Loaded library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\MSVCR71.dll from path=
D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Library.load:206] Loading orawsec11.dll...
[main] [14:59:17:54] [Library.load:212] oracleHome D:\app\Administrator\product\11.1.0\db_1
[main] [14:59:17:54] [Library.load:227] Property oracle.installer.library_loc is set to value=D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Library.load:229] Loading library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\orawsec11.dll
[main] [14:59:17:54] [Library.load:262] Loaded library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\orawsec11.dll from path=
D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Library.load:206] Loading orasrvm11.dll...
[main] [14:59:17:54] [Library.load:212] oracleHome D:\app\Administrator\product\11.1.0\db_1
[main] [14:59:17:54] [Library.load:227] Property oracle.installer.library_loc is set to value=D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Library.load:229] Loading library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\orasrvm11.dll
[main] [14:59:17:54] [Library.load:262] Loaded library D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32\orasrvm11.dll from path=
D:\app\Administrator\product\11.1.0\db_1\oui\lib\win32
[main] [14:59:17:54] [Version.isPre10i:213] isPre10i.java: Returning FALSE
[main] [14:59:17:54] [WindowsSystem.regKeyExists:1104] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
[main] [14:59:17:648] [WindowsSystem.getCSSConfigType:1271] configType=null
[main] [14:59:17:648] [Host.checkOPS:2308] cluster existence:false
[main] [14:59:17:648] [Host.checkOPS:2346] Cluster installed=false
[AWT-EventQueue-0] [14:59:19:429] [OsUtilsBase.getOracleBaseFromInventory:413] Getting ORACLE_BASE from inventory.
[AWT-EventQueue-0] [14:59:19:445] [OsUtilsBase.getOracleBaseFromInventory:427] Setting oracle.installer.oui_loc = D:\app\Administrator\product\11.1.0\db_1\oui
[AWT-EventQueue-0] [14:59:19:445] [OsUtilsBase.getOracleBaseFromInventory:430] Oracle Inventory property invptrloc = null
[AWT-EventQueue-0] [14:59:19:445] [OsUtilsBase.getOracleBaseFromInventory:447] Inventory Home Size = 1
[AWT-EventQueue-0] [14:59:19:445] [OsUtilsBase.getOracleBaseFromInventory:473] ORACLE_BASE returned from inventory:= D:\app\Administrator
[AWT-EventQueue-0] [14:59:19:445] [Host.displayOracleBaseWarning:1115] oracleBaseFromEnv null
[AWT-EventQueue-0] [14:59:19:445] [Host.displayOracleBaseWarning:1121] oracle_base from OUI D:\app\Administrator oracle_base from env
[AWT-EventQueue-0] [14:59:24:538] [InitParamHandler.endElement:517] CustomSGA flag: false
[AWT-EventQueue-0] [14:59:24:538] [InitParamHandler.endElement:518] Database Type: MULTIPURPOSE
[AWT-EventQueue-0] [14:59:24:538] [InitParamHandler.endElement:519] Mem Percentage: 40
[AWT-EventQueue-0] [14:59:24:538] [InitParamHandler.endElement:552] Total memory MB: 818
[AWT-EventQueue-0] [14:59:24:538] [OsUtilsBase.is64Bit:294] architecture is 64 bit: false
[AWT-EventQueue-0] [14:59:24:538] [MemoryCalculator.<clinit>:92] setting memory minimums for 32 bit
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:237] IN threadID:1 group#=1
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:237] IN threadID:1 group#=2
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:246] Current threadID=1
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:253] Current threadID=1 ==> redoGroups[0]=1
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:263] vRedoGroups:[1]
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:293] setAttribute: bExists=false
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:237] IN threadID:1 group#=3
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:246] Current threadID=1
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:253] Current threadID=1 ==> redoGroups[0]=1
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:253] Current threadID=1 ==> redoGroups[1]=2
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:263] vRedoGroups:[1, 2]
[AWT-EventQueue-0] [14:59:24:554] [StorageAttributes.setAttribute:293] setAttribute: bExists=false
[AWT-EventQueue-0] [14:59:24:554] [TemplateManager.parseCloneTemplate:1509] See for any transportable datafiles in TemplateManager.....
[AWT-EventQueue-0] [14:59:36:804] [DatabaseNamePage.onNameChanged:751] m_oldGDBName =
[AWT-EventQueue-0] [14:59:36:819] [OracleHome.isRacEnabled:177] bRacOn = false
[AWT-EventQueue-0] [14:59:36:897] [ManagementOptionsPage.initializePage:692] Enumerating Agents
[AWT-EventQueue-0] [14:59:41:350] [ManagementOptionsPage.validate:1049] emConfigChkBox State: true
[AWT-EventQueue-0] [14:59:41:350] [ManagementOptionsPage.validate:1050] switchChkBox State: false
[AWT-EventQueue-0] [14:59:41:350] [ManagementOptionsPage.validateAndSetParams:1090] In validateAndSetParams
[AWT-EventQueue-0] [14:59:41:350] [NetworkUtils.checkListenerStatus:350] Checking listener status: LISTENER
[AWT-EventQueue-0] [14:59:41:569] [NetworkUtils.checkListenerStatus:356] lsnrct status output
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 13-JUN-2008 14:59:41
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=XXX)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Production
Start Date 13-JUN-2008 10:32:10
Uptime 0 days 4 hr. 27 min. 33 sec
Trace Level user
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\app\Administrator\product\11.1.0\db_1\network\admin\listener.ora
Listener Log File d:\app\administrator\diag\tnslsnr\XXX\listener\alert\log.xml
Listener Trace File d:\app\administrator\diag\tnslsnr\XXX\listener\trace\ora_1792_1876.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=XXX)(PORT=1521)))
Services Summary...
Service "Oracle8" has 2 instance(s).
Instance "ORCL", status UNKNOWN, has 1 handler(s) for this service...
Instance "XXX", status UNKNOWN, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
The command completed successfully
[AWT-EventQueue-0] [15:0:14:475] [TemplateManager.isInstallTemplate:2226] Selected Template by user:=General Purpose
[AWT-EventQueue-0] [15:0:14:475] [TemplateManager.isInstallTemplate:2233] The Message Id to be searched:=GENERAL_PURPOSE
[AWT-EventQueue-0] [15:0:14:490] [TemplateManager.isInstallTemplate:2226] Selected Template by user:=General Purpose
[AWT-EventQueue-0] [15:0:14:490] [TemplateManager.isInstallTemplate:2233] The Message Id to be searched:=GENERAL_PURPOSE
[AWT-EventQueue-0] [15:0:14:506] [TemplateManager.isInstallTemplate:2226] Selected Template by user:=General Purpose
[AWT-EventQueue-0] [15:0:14:506] [TemplateManager.isInstallTemplate:2233] The Message Id to be searched:=GENERAL_PURPOSE
[AWT-EventQueue-0] [15:0:15:84] [Verifier.processRawConfigFile:3709] StorageType == 0
[AWT-EventQueue-0] [15:0:15:84] [DatabaseOptionPage.doNext:266] processRawConfigFile=false
[AWT-EventQueue-0] [15:0:17:724] [InitParametersPage.validate:225] InitParametersPage->validate: in SPFile condition
[AWT-EventQueue-0] [15:0:17:724] [InitParametersPage.validate:229] original spFileName with variables ={ORACLE_HOME}\database\spfile{SID}.ora
[AWT-EventQueue-0] [15:0:17:724] [Verifier.validateSPFile:4853] The SPFILE={ORACLE_HOME}\database\spfile{SID}.ora
[AWT-EventQueue-0] [15:0:17:724] [ClusterUtils.validateRawDevice:784] Inside validateRawDevice
[AWT-EventQueue-0] [15:0:17:724] [ClusterUtils.validateRawDevice:796] Device Exception
[AWT-EventQueue-0] [15:0:17:724] [ClusterUtils.isRaw:762] The handle is invalid.
[AWT-EventQueue-0] [15:0:17:724] [InitParametersPage.validate:337] InitParametersPage->validate: calling createUndoAttributes
[AWT-EventQueue-0] [15:0:19:131] [StoragePage.selectAndExpandItem:333] item=oracle.sysman.emSDK.client.dataComponent.dataDrivenTree.TreeParentNode[label=Storage,index=0]
[AWT-EventQueue-0] [15:0:19:178] [StoragePage.selectAndExpandItem:342] item.isExpanded=true
[AWT-EventQueue-0] [15:0:19:193] [StoragePage.selectAndExpandItem:354] selection.isSelected(item)=false
[AWT-EventQueue-0] [15:0:20:771] [StoragePage.validate:934] StoragePage: In validate function
[AWT-EventQueue-0] [15:0:20:787] [Verifier.validateTemplate:1780] StorageType == 0
[AWT-EventQueue-0] [15:0:20:818] [CreationOptionPage.setSaveTemplateVisible:465] Setting save template visible = true
[AWT-EventQueue-0] [15:0:23:177] [DBCAWizard.onFinish:1203] m_bFinishClicked: false
[TaskScheduler timer] [15:0:23:177] [OracleHome.isRacEnabled:177] bRacOn = false
[TaskScheduler timer] [15:0:23:193] [NetworkUtils.checkListenerStatus:350] Checking listener status: LISTENER
[TaskScheduler timer] [15:0:23:412] [NetworkUtils.checkListenerStatus:356] lsnrct status output
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 13-JUN-2008 15:00:23
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=XXX)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Production
Start Date 13-JUN-2008 10:32:10
Uptime 0 days 4 hr. 28 min. 14 sec
Trace Level user
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\app\Administrator\product\11.1.0\db_1\network\admin\listener.ora
Listener Log File d:\app\administrator\diag\tnslsnr\XXX\listener\alert\log.xml
Listener Trace File d:\app\administrator\diag\tnslsnr\XXX\listener\trace\ora_1792_1876.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=XXX)(PORT=1521)))
Services Summary...
Service "Oracle8" has 2 instance(s).
Instance "ORCL", status UNKNOWN, has 1 handler(s) for this service...
Instance "XXX", status UNKNOWN, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
Service "XXX" has 1 instance(s).
Instance "XXX", status READY, has 1 handler(s) for this service...
The command completed successfully
[TaskScheduler timer] [15:0:23:412] [Verifier.validateTemplate:1780] StorageType == 0
[TaskScheduler timer] [15:0:23:412] [Verifier.calculateCloneDatafilePathsAndSizes:3137] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:412] [Verifier.calculateCloneDatafilePathsAndSizes:3137] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:412] [Verifier.calculateCloneDatafilePathsAndSizes:3137] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:412] [Verifier.calculateCloneDatafilePathsAndSizes:3137] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:412] [Verifier.calculateCloneDatafilePathsAndSizes:3137] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:443] [Verifier.calculateRedoLogGroupFileSizes:3269] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:443] [Verifier.calculateRedoLogGroupFileSizes:3269] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:443] [Verifier.calculateRedoLogGroupFileSizes:3269] canonicalPath=D:\app\Administrator\oradata\
[TaskScheduler timer] [15:0:23:443] [Verifier.getControlfFileSizes:3187] No. of Control files:=3
[Thread-15] [15:0:23:474] [UIHost.getHtmlSummary:1055] UIHost:getHtmlSummary: running createTemplateDocument NOT for SHOW_TEMPLATE condition
[Thread-15] [15:0:23:490] [UIHost.getHtmlSummary:1061] UIHost:getHtmlSummary: after running createTemplateDocument NOT for SHOW_TEMPLATE condition
[Thread-15] [15:0:23:615] [XSLConst.generateHeaderXSL:211] NLS:Template Name:= null
[Thread-15] [15:0:23:615] [XSLConst.generateHeaderXSL:216] Template Description:= Use this database template to create a pre-configured database optimized for general purpose or transaction processing usage.
[Thread-15] [15:0:23:865] [UIHost.getHtmlSummary:1100] UIHost->getHtmlSummary: start printing of transformed document
[TaskScheduler timer] [15:0:26:302] [Host.executeSteps:4426] Executing steps....
[TaskScheduler timer] [15:0:26:302] [Host.setUpForOperation:3198] setUpForOperation: Mode = 128
[TaskScheduler timer] [15:0:26:302] [OsUtilsBase.copyFile:715] OsUtilsBase.copyFile:
[TaskScheduler timer] [15:0:26:318] [OsUtilsBase.copyFile:763] **write of file at destination complete...
[TaskScheduler timer] [15:0:26:318] [OsUtilsBase.copyFile:798] **file copy status:= true
[TaskScheduler timer] [15:1:13:879] [OsUtilsBase.copyFile:763] **write of file at destination complete...
[TaskScheduler timer] [15:1:13:879] [OsUtilsBase.copyFile:798] **file copy status:= true
[TaskScheduler timer] [15:1:13:895] [Host.executeSteps:4605] setupForOperation returned: true
[TaskScheduler timer] [15:1:13:895] [Host.createStepSQLInterface:6444] sid =Mapping
[TaskScheduler timer] [15:1:13:895] [SQLEngine.getEnvParams:446] NLS_LANG: AMERICAN_AMERICA.WE8MSWIN1252
[TaskScheduler timer] [15:1:13:895] [SQLEngine.initialize:253] Execing SQLPLUS/SVRMGR process...
[TaskScheduler timer] [15:1:14:35] [SQLEngine.initialize:281] m_bReaderStarted: false
[TaskScheduler timer] [15:1:14:35] [SQLEngine.initialize:285] Starting Reader Thread...
[Thread-35] [15:1:14:35] [StepContext$ModeRunner.run:2487] ---- Progress Needed:=true
[Thread-35] [15:1:14:67] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-35] [15:1:14:67] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-35] [15:1:14:67] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-35] [15:1:14:67] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-35] [15:1:14:67] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-35] [15:1:14:67] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-35] [15:1:14:67] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@e1666
[Thread-35] [15:1:14:67] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-35] [15:1:14:67] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@e1666
[Thread-35] [15:1:14:67] [InitParamAttributes.sortParams:3562] m_sortOn:4 sortOn:4
[Thread-35] [15:1:14:67] [InitParamAttributes.createInitFile:1698] Processing init param db_block_size
[Thread-35] [15:1:14:67] [InitParamAttributes.createInitFile:1703] The value is 8192
[Thread-35] [15:1:14:67] [InitParamAttributes.createInitFile:1698] Processing init param open_cursors
[Thread-35] [15:1:14:67] [InitParamAttributes.createInitFile:1703] The value is 300
[Thread-35] [15:1:14:67] [InitParamAttributes.createInitFile:1698] Processing init param db_domain
[Thread-35] [15:1:14:67] [InitParamAttributes.createInitFile:1703] The value is ""
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param db_name
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is Mapping
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param control_files
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is ("D:\app\Administrator\oradata\Mapping\control01.ctl", "D:\app\Administrator\oradata\Mapping\control02.ctl", "D:\app\Administrator\oradata\Mapping\control03.ctl")
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param db_recovery_file_dest
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is D:\app\Administrator\flash_recovery_area
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param db_recovery_file_dest_size
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is 2147483648
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param compatible
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is 11.1.0.0.0
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param diagnostic_dest
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is D:\app\Administrator
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param memory_target
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is 857735168
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param processes
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is 150
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param audit_file_dest
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is D:\app\Administrator\admin\Mapping\adump
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param audit_trail
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is db
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param remote_login_passwordfile
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is EXCLUSIVE
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param dispatchers
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is "(PROTOCOL=TCP) (SERVICE=MappingXDB)"
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1698] Processing init param undo_tablespace
[Thread-35] [15:1:14:192] [InitParamAttributes.createInitFile:1703] The value is UNDOTBS1
[Thread-35] [15:1:14:473] [OracleHome.isRacEnabled:177] bRacOn = false
[Thread-35] [15:1:14:473] [Host.noEntryinOratab:5562] Check made for oratab arg passed............
[Thread-35] [15:1:14:473] [Oradim.getAddEntryCommand:355] AddEntry=[D:\app\Administrator\product\11.1.0\db_1\bin\oradim.exe, -new, -sid, MAPPING, -startmode, manual, -spfile]
[Thread-35] [15:1:19:35] [Oradim.getEditEntryCommand:436] getEditEntry cmd=[D:\app\Administrator\product\11.1.0\db_1\bin\oradim.exe, -edit, -sid, MAPPING, -startmode, auto, -srvcstart, system]
[Thread-35] [15:1:19:520] [Oradim.addSidToRegistry:884] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb11g_home1
[Thread-35] [15:1:19:520] [OracleHome.getVersion:974] OracleHome.getVersion called. Current Version: 11.1.0.6.0
[Thread-35] [15:1:19:520] [OracleHome.getVersion:1046] Current Version From Inventory: 11.1.0.6.0
[Thread-35] [15:1:19:520] [OracleHome.getVersion:1051] using sqlplus: D:\app\Administrator\product\11.1.0\db_1\bin\sqlplus.exe
[Thread-35] [15:1:19:520] [CommonUtils.createPasswordFile:515] calling new orapwd for version : 11.1.0.6.0
[Thread-35] [15:1:19:520] [OsUtilsBase.execProg:1335] beginning execProg with input array.
[Thread-35] [15:1:19:520] [OsUtilsBase.execProg:1347] finished execProg with input array.
[Thread-35] [15:1:19:520] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@e1666
[Thread-35] [15:1:19:520] [CloneRmanRestoreStep.executeImpl:218] Instance Creation went fine..........
[Thread-35] [15:1:19:520] [CloneRmanRestoreStep.executeImpl:225] db_recovery_file_dest=D:\app\Administrator\flash_recovery_area
[Thread-35] [15:1:19:520] [CloneRmanRestoreStep.executeImpl:228] db_recovery_file_dest_size=2147483648
[Thread-35] [15:1:23:67] [SQLEngine.done:2014] Done called
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACLE not available
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:853)
     at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:245)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
     at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
     at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2497)
     at java.lang.Thread.run(Thread.java:595)
[Thread-35] [15:1:23:207] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@e1666
[Thread-35] [15:1:23:207] [StepContext$ModeRunner.run:2513] oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:448)
oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2497)
java.lang.Thread.run(Thread.java:595)
[Thread-35] [15:1:24:191] [SQLEngine.done:2014] Done called
[Thread-35] [15:1:24:191] [Host.createStepSQLInterface:6444] sid =Mapping
[Thread-35] [15:1:24:207] [SQLEngine.getEnvParams:446] NLS_LANG: AMERICAN_AMERICA.WE8MSWIN1252
[Thread-35] [15:1:24:207] [SQLEngine.initialize:253] Execing SQLPLUS/SVRMGR process...
[Thread-35] [15:1:24:207] [SQLEngine.initialize:281] m_bReaderStarted: false
[Thread-35] [15:1:24:207] [SQLEngine.initialize:285] Starting Reader Thread...
[Thread-35] [15:1:24:348] [CloneRmanRestoreStep.cancel:614] Cleaning up partially extracted files failed
[Thread-35] [15:1:24:535] [SQLEngine.done:2014] Done called
[Thread-35] [15:1:24:754] [CloneRmanRestoreStep.cancel:629] RMAN cleanup failed
[Thread-35] [15:1:24:754] [CloneRmanRestoreStep.cancel:630] oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:853)
oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.cancel(CloneRmanRestoreStep.java:617)
oracle.sysman.assistants.util.step.StepContext$ModeRunner.cancel(StepContext.java:2590)
oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2552)
java.lang.Thread.run(Thread.java:595)
[Thread-35] [15:1:24:754] [CloneDBCreationStep.cancel:895] CloneDBCreationStep.cancel(): nodeList= null
[Thread-35] [15:1:24:754] [SQLEngine.reInitialize:624] Reinitializing SQLEngine...
[Thread-35] [15:1:24:754] [SQLEngine.getEnvParams:446] NLS_LANG: AMERICAN_AMERICA.WE8MSWIN1252
[Thread-35] [15:1:24:754] [SQLEngine.initialize:253] Execing SQLPLUS/SVRMGR process...
[Thread-35] [15:1:24:754] [SQLEngine.initialize:281] m_bReaderStarted: false
[Thread-35] [15:1:24:863] [SQLEngine.initialize:285] Starting Reader Thread...
[Thread-35] [15:1:24:863] [SQLEngine.initialize:334] Waiting for m_bReaderStarted to be true
[Thread-35] [15:1:25:254] [SQLEngine.done:2014] Done called
[Thread-35] [15:1:25:473] [OracleHome.isRacEnabled:177] bRacOn = false
[Thread-35] [15:1:25:473] [Oradim.getRemoveEntryCommand:477] Execing D:\app\Administrator\product\11.1.0\db_1\bin\oradim.exe -delete -sid MAPPING
[Thread-35] [15:1:27:316] [SQLEngine.done:2014] Done called
[AWT-EventQueue-0] [15:1:30:379] [SQLEngine.done:2014] Done called
Any help will be greatly appreciated.

I found out from another dba that oracle takes up 1 gb of memory by default. So creating 2 databases with default settings means that 2 gb of memory was taken on a windows 32 bit server. So that means only 2 gb is available to the machine, and the server takes up more than half of that making the memory available scarce for another oracle database to be created.

OVM 3.3.1: NFS storage is not available during repository creation

Hi, I have OVM Manager running on a separate machines managing 3 servers running OVM server in a server pool. One of the server also exports a NFS share that all other machines are able to mount and read/write to. I want to use this NFS share to create a OVM repository but so far unable to get it to work.
From this first screen shot we can see that the NFS file system was successfully added under storage tab and refreshed.
https://www.dropbox.com/s/fyscj2oynud542k/Screenshot%202014-10-11%2013.40.00.png?dl=0
But its is not available when adding a repository as shown below. What can I did to make it show up here.
https://www.dropbox.com/s/id1eey08cdbajsg/Screenshot%202014-10-11%2013.40.19.png?dl=0
No luck with CLI either. Any thoughts?
OVM> create repository name=myrepo fileSystem="share:/" sharepath=myrepo - Configurable attribute by this name can't be found.
== NFS file system refreshed via CLI ===
OVM> refresh fileServer name=share
Command: refresh fileServer name=share
Status: Success
Time: 2014-10-11 13:28:14,811 PDT
JobId: 1413059293069
== file system info
OVM> show fileServer name=share
Command: show fileServer name=share
Status: Success
Time: 2014-10-11 13:28:28,770 PDT
Data:
FileSystem 1 = ff5d21be-906d-4388-98a2-08cb9ac59b43 [share]
FileServer Type = Network
Storage Plug-in = oracle.generic.NFSPlugin.GenericNFSPlugin (1.1.0) [Oracle Generic Network File System]
Access Host = 1.2.3.4
Admin Server 1 = 44:45:4c:4c:46:00:10:31:80:51:c6:c0:4f:35:48:31 [dev1]
Refresh Server 1 = 44:45:4c:4c:46:00:10:31:80:51:c6:c0:4f:35:48:31 [dev1]
Refresh Server 2 = 44:45:4c:4c:47:00:10:31:80:51:b8:c0:4f:35:48:31 [dev2]
Refresh Server 3 = 44:45:4c:4c:33:00:10:34:80:38:c4:c0:4f:53:4b:31 [dev3]
UniformExports = Yes
Id = 0004fb0000090000fb2cf8ac1968505e [share]
Name = share
Description = NFS exported /dev/sda1 (427GB) on dev1
Locked = false
== version details ==
OVM server:3.3.1-1065
Agent Version:3.3.1-276.el6.7Kernel Release:3.8.13-26.4.2.el6uek.x86_64
Oracle VM Manager
Version: 3.3.1.1065
Build: 20140619_1065

Actually, OVM, as is with all virtualization servers, is usually only the head on a comprehensive infrastructure. OVM seems quite easy from the start, but I'd suggest, that you at least skim trough the admin manual, to get some understanding of the conecpts behind it. OVS thus usually only provides the CPU horse power, but not the storage, unless you only want to setup a single-server setup. If you plan on having a real multi-server setup, then you will need shared storage.
The shared storage for the server pool, as well as the storage repository can be served from the same NFS server without issues. If you want to have a little testbed, then NFS is for you. It lacks some features that OCFS2 benefits from, like thin provisioning, reflinks and sparse files.
If you want to remove the NFS storage, then you'll need to remove any remainders of any OVM object, like storage repositories or server pool filesystems. Unpresent and storage repo and delete it afterwards… Also, I hope that you didn't create the NFS export directly on the root of the drive, since OVM wants to remove any file on the NFS export and on any root of ony volume there's the lost-found folder, which OVM, naturally, can't remove. Getting rid of such a storage repo can be a bit daunting…
Cheers,
budy

Element GRP is not available in the container

Hi All,
I am getting a error ''Element GRP is not available in the container'' whenever I try to create a PR and the workflow is triggered. I am using a custom rule to determine the approver. The workflow is not able to determine the agent and returns with the error message Element GRP is not available in the container whenever it is triggered automatically.
But when i manually test the workflow manually it is working fine.
Can someone tell me why it is happening and what could be done to overcome this error?
Thanks and regards,
Raj

As you said
"But when i manually test the workflow manually it is working fine."
I think the problem is not with your rule ....
you haven't specified when the error is occurring ...
if its occurring in starting ..please check if your initial binding ( For workflow triggering in header ) are right .
please tell us where and when the error is occurring ...
thanks,
Naval bhatt

Loaded fonts not available to apps

Running 10.6.8, using Font Agent Pro, have not had problem for past year and a half, and all of a sudden yesterday, fonts not recognized by apps. Using Quark, versions 6 - 9, Adobe Creative Suites CS3 - CS6, Word, Excel, etc. I have loaded fonts through Fontbook instead of using Font Agent Pro, I have removed caches with terminal, ran Repair Disk Permissions, Shutdown, boot in Safe Mode, everything I can think of. In Fontbook, fonts display correctly but a lot of them are not available in other Apps. For instance, Arial & Arial Bold not available, but Italic & Bold Italic are fine. I work at a commercial printer and this is killing me!

Did you repair permissions and restarted your computer after the font installatons?

Problems installing DSEE 6.2: cacao agent won't run!

I am using the JES 5 Update 1 installer to install DSEE 6.2. During installation, I receive the following error (in the install log):
DSEEConsoleAgent
Installing Package: SUNWldap-console-agent
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
191 blocks
Registering DSCC Agent in Cacao...
Checking Cacao status...
## Failed to run /opt/SUNWcacao/bin/cacaoadm get-param network-bind-address
#### Invalid parameter name: [network-bind-address].
## Exit code is 22
Failed to register DSCC agent with Cacao.
Processing package instance <SUNWldap-console-agent> from </var/spool/stage/sun_java_es5/Solaris_sparc/Product/directory_svr/Packages>
Sun Java(TM) System Directory Control Center Agent(sparc) 6.0,REV=2007.01.25
Using </opt/SUNWdsee> as the package base directory.
## Processing package information.
## Processing system information.
3 package pathnames are already properly installed.
Installing Sun Java(TM) System Directory Control Center Agent as <SUNWldap-console-agent>
## Installing part 1 of 1.
## Executing postinstall script.
Installation of <SUNWldap-console-agent> was successful.
Installed Package: SUNWldap-console-agentI am able to perform the DSCC Initialize just fine.
But when I check the cacao agent status with cacaoadm, I get the following:
default instance is ENABLED at system startup
default instance is not runningSo, I try to start the cacao agent using: /opt/SUNWcacao/bin/cacaoadm start, and I get the following error:
No suitable Java runtime found. Java 1.4.2_03 or higher is required.
Cannot locate all the dependencies.I'm not sure what to do here. When I type java -version, I get
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04)

Hi.
Can you check the Common Agent Container version ?
/opt/SUNWcacao/bin/cacaoadm --version
In any case, try '/opt/SUNWcacao/bin/cacaoadm rebuild-dependencies'.
Regards,
Carole

Imac taking more time than usual to boot and Bluetooth functionality is not available

My IMac (21" 10.9.1 OS X 2.5GHZ Intel Core i5) is taking much time to boot. I am seeing this happening from past one week. I am also facing Bluetooth issue. My bluetooth Keyboard and Mouse are not working. So I had to connect with normal USB Keyboard and Mouse and when I logged in, I am able to see that the bluetooth functionality is disabled. It is saying Bluetooth not available.
I tried to do Repair Disk permissions (on Disk Utility) and also tried PRAM reset. Both did not work.
Do anyone faced the same isse? Question here is.
1) Can anyone help me to resolve this issue?.
2) What caused this issue all of a sudden, I dont remember installing any softwares recently.
Thanks in advance.

Hi,
Below are the details, that I have taken from Etrecheck. Can you pls have a look into this..
Hardware Information:
          iMac (21.5-inch, Mid 2011)
          iMac - model: iMac12,1
          1 2.5 GHz Intel Core i5 CPU: 4 cores
          4 GB RAM
Video Information:
          AMD Radeon HD 6750M - VRAM: 512 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:6:52
Disk Information:
          ST3500418AS disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Mcintosh (disk0s2) /: 499.25 GB (61.48 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          OPTIARC DVD RW AD-5690H
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          USB USB Keyboard
          DragonRise Inc.   Generic   USB Joystick
          Logitech USB Optical Mouse
          Apple Computer, Inc. IR Receiver
          Apple Internal Memory Card Reader
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
          com.orderedbytes.driver.CMUSBDevices          (4.6.0 - SDK 10.6)
          com.orderedbytes.driver.ControllerMateFamily          (4.6.0 - SDK 10.6)
Startup Items:
          HWNetMgr: Path: /Library/StartupItems/HWNetMgr
          HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.google.keystone.daemon.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
          [System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
Launch Agents:
          [System] com.google.keystone.agent.plist 3rd-Party support link
          [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
          [System] com.orderedbytes.ControllerMateHelper.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
User Login Items:
          iTunesHelper
          USBOverdriveHelper
          VMware Fusion Start Menu
Internet Plug-ins:
          FlashPlayer-10.6: Version: 11.9.900.117 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Flash Player: Version: 11.9.900.117 - SDK 10.6 Outdated! Update
          QuickTime Plugin: Version: 7.7.3
          o1dbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
          SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
          npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
          googletalkbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
          JavaAppletPlugin: Version: Java 7 Update 45 Outdated! Update
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
          Unity Web Player: Version: UnityPlayer version 2.6.1f3 3rd-Party support link
          RealPlayer Plugin: Version: Unknown
          Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
          Java 3rd-Party support link
Bad Fonts:
          None
Old Applications:
          Wondershare Helper Compact:          Version: 2.2.6.0 - SDK 10.5 3rd-Party support link
                    /Applications/Wondershare Helper compact/Wondershare Helper Compact.app
          PwnageTool:          Version: 5.1.1 - SDK 10.4 3rd-Party support link
                    /Users/Shared/Sowndar/iPhone/PwnageTool.app
          VLC:          Version: 2.0.1 - SDK 10.5 3rd-Party support link
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               6%          mds
               3%          mds_stores
               0%          EtreCheck
               0%          WindowServer
               0%          SystemUIServer
Top Processes by Memory:
          143 MB          com.apple.IconServicesAgent
          102 MB          mds_stores
          90 MB          softwareupdated
          70 MB          sandboxd
          61 MB          com.apple.WebKit.WebContent
Virtual Memory Information:
          548 MB          Free RAM
          1.53 GB          Active RAM
          1.12 GB          Inactive RAM
          826 MB          Wired RAM
          1.53 GB          Page-ins
          0 B          Page-outs

Health Service in which the location monitoring object is contained is not available

Hello,
When i am trying to discover new machines I am getting this error:
Health Service 'OPMGRRMS1.xxx.xxx.xxx.xxx' in which the location monitoring object is contained is not available
All services have been restarted successfully without error... on the RMS Server.
- System Center Data Access
- System Center Management
- System Center Management Configuration
- System Event Notification Service
but still having the error...
Date: 10/27/2009 10:14:00 AM
Application: System Center Operations Manager 2007 R2
Application Version: 6.1.7221.0
Severity: Error
Message:
Microsoft.EnterpriseManagement.Common.LocationMonitoringObjectNotAvailableException: Health Service 'OPMGRRMS1.ad.medctr.ucla.edu' in which the location monitoring object is contained is not available. Make sure that the computer hosting the Health Service is available and verify that the Health Service is running.
at Microsoft.EnterpriseManagement.DataAbstractionLayer.SdkDataAbstractionLayer.HandleSubmitTaskIndigoExceptions(Exception ex)
at Microsoft.EnterpriseManagement.DataAbstractionLayer.AdministrationOperations.LaunchDiscovery(Guid batchId, List`1 jobDefinitions)
at Microsoft.EnterpriseManagement.Administration.ManagementServer.BeginExecuteWindowsDiscovery(IList`1 discoveryConfigurations, AsyncCallback callback, Object state)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.DiscoveryProgress.<>c__DisplayClass7.<SubmitTask>b__3(Object , ConsoleJobEventArgs )
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
DW works (Datawarehouse) I restarted the System Center Management successfully
MS works (2nd Management Server) I restarted the System Center Management successfully
ACS works (Audit Control Server) cannot access the reporting server but I restarted the System Center Management successfully
RMS DB 48 % Free
DW DB 18% Free
ACS DB 13% Free
I can ping the RMS Server what other test could I do?
I removed the new items:
Delete the six modules of Windows Failover Clustering Management Pack (SCOM Console > Administration > Management Packs > Right Click delete on it)
Uninstall System Center Operations Manager 2007 R2 Authoring Resource Kit (Add/Remove Programs)
Uninstall System Center Operations Manager 2007 R2 Authoring Console (Add/Remove Programs)
Reboot the RMS Server
SAME ERROR!!!
Any idea
Thanks,
Dom
Altiris Support / System Center Configuration Manager Support

Hi Marius,
In the Operations Manager Log I have some errors:
Log Name: Operations Manager
Source: HealthService
Date: 10/28/2009 10:15:06 PM
Event ID: 4506
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: OPMGRRMS1.ad.medctr.ucla.edu
Description:
Data was dropped due to too much outstanding data in rule "Microsoft.SQLServer.2008.LoginsPerSecCollection" running for instance "MSSQLSERVER" with id:"{24345584-0FD5-0FAB-2293-D4C82BEDB086}" in management group "SCOM-MED".
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="HealthService" />
<EventID Qualifiers="49152">4506</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-10-29T05:15:06.000Z" />
<EventRecordID>4126486</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>OPMGRRMS1.ad.medctr.ucla.edu</Computer>
<Security />
</System>
<EventData>
<Data>SCOM-MED</Data>
<Data>Microsoft.SQLServer.2008.LoginsPerSecCollection</Data>
<Data>MSSQLSERVER</Data>
<Data>{24345584-0FD5-0FAB-2293-D4C82BEDB086}</Data>
</EventData>
</Event>
Log Name: Operations Manager
Source: HealthService
Date: 10/28/2009 10:15:50 PM
Event ID: 1107
Task Category: Health Service
Level: Error
Keywords: Classic
User: N/A
Computer: OPMGRRMS1.ad.medctr.ucla.edu
Description:
Account for RunAs profile in workflow "Microsoft.SystemCenter.DataWarehouse.CollectEntityHealthStateChange", running for instance "OPMGRRMS1.ad.medctr.ucla.edu" with id:"{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}" is not defined. Workflow will not be loaded. Please associate an account with the profile. Management group "SCOM-MED"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="HealthService" />
<EventID Qualifiers="49152">1107</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-10-29T05:15:50.000Z" />
<EventRecordID>4126487</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>OPMGRRMS1.ad.medctr.ucla.edu</Computer>
<Security />
</System>
<EventData>
<Data>SCOM-MED</Data>
<Data>{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}</Data>
<Data>OPMGRRMS1.ad.medctr.ucla.edu</Data>
<Data>Microsoft.SystemCenter.DataWarehouse.CollectEntityHealthStateChange</Data>
</EventData>
</Event>
Log Name: Operations Manager
Source: HealthService
Date: 10/28/2009 10:15:50 PM
Event ID: 1107
Task Category: Health Service
Level: Error
Keywords: Classic
User: N/A
Computer: OPMGRRMS1.ad.medctr.ucla.edu
Description:
Account for RunAs profile in workflow "Microsoft.SystemCenter.DataWarehouse.CollectEventData", running for instance "OPMGRRMS1.ad.medctr.ucla.edu" with id:"{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}" is not defined. Workflow will not be loaded. Please associate an account with the profile. Management group "SCOM-MED"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="HealthService" />
<EventID Qualifiers="49152">1107</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-10-29T05:15:50.000Z" />
<EventRecordID>4126488</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>OPMGRRMS1.ad.medctr.ucla.edu</Computer>
<Security />
</System>
<EventData>
<Data>SCOM-MED</Data>
<Data>{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}</Data>
<Data>OPMGRRMS1.ad.medctr.ucla.edu</Data>
<Data>Microsoft.SystemCenter.DataWarehouse.CollectEventData</Data>
</EventData>
</Event>
Log Name: Operations Manager
Source: HealthService
Date: 10/28/2009 10:15:50 PM
Event ID: 1107
Task Category: Health Service
Level: Error
Keywords: Classic
User: N/A
Computer: OPMGRRMS1.ad.medctr.ucla.edu
Description:
Account for RunAs profile in workflow "Microsoft.SystemCenter.DataWarehouse.CollectPerformanceData", running for instance "OPMGRRMS1.ad.medctr.ucla.edu" with id:"{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}" is not defined. Workflow will not be loaded. Please associate an account with the profile. Management group "SCOM-MED"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="HealthService" />
<EventID Qualifiers="49152">1107</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-10-29T05:15:50.000Z" />
<EventRecordID>4126489</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>OPMGRRMS1.ad.medctr.ucla.edu</Computer>
<Security />
</System>
<EventData>
<Data>SCOM-MED</Data>
<Data>{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}</Data>
<Data>OPMGRRMS1.ad.medctr.ucla.edu</Data>
<Data>Microsoft.SystemCenter.DataWarehouse.CollectPerformanceData</Data>
</EventData>
</Event>
these errors are recurrent...
the RMS is doing yoyo between Green as healthy and grayed out under Monitoring > Windows Computers or Administration > Device Management > Management Servers (2-3 minutes green then grayed out) there is no event in the Windows Event Log as System Center Management service remains running...
This MP for the Data Warehouse Internal Library has been removed and restored two weeks agao with Premier Support as the RMS was already fleaky and doing gray-green...
I have tried again but I will need to check again as it seems these errors are pointing to the Data Warehouse Library and not only the Data Warehouse Internal Library Management Pack. The main problem with this is that the Data Warehouse Library is [b]94[/b] Management Packs which depends on this Data Warehouse Library in our environment so if I need to remove this one it is almost a complete reinstallation of 50% of our MPs :(
Heartbeat failures: The Heartbeat State view ( Health Service Watcher (Agent) - All) is giving me 10 Critical and 1 Warning
[b]Any way to delete All MPs and restore them at once?[/b]
I have an issue trying deleting "Notifications Internal Library":
The User does not have sufficient permissions to perform the operation"
I am using my own account which is supposed to have all accesses.
I tried the hotfix 938510 but it does not seem to apply to SCOM R2
Thanks
Dom
Altiris Support / System Center Configuration Manager Support

SAP Authentication not available

Hello together!
on a BOE-System (XI 3.1, SP3, FP 3.5) is the SAP Authentication for the InfoView- and the CMC-logon not available. I think the problem is that they haven't installed the SAPJCO correct or did some other mistakes during the installation and configuration process. Until now I tried the following because to install and configurate the system new is not really a opportunity:
check if in the CMC the SAP Authentication is enable
check in the web.xml if the authentication.visible is set to true
copied the sapjco.jar into the Tomcat55\shared\lib and Tomcat55\common\lib
copied the two *.dll from the SAPJCO to the windows\system32 folder
set the classpath
redeployed the Apps: InfoViewApp, InfoviewAppActions, CmcApp, CmcAppActions, PartnerPlatformServices, SAP, OpenDocument and dswsbobje
run the partnercafinstall.bat
and restart the tomcat and the Server Intelligence Agent
Btw the Integration Kit for SAP works - it's just the problem with the missing authentication method.
Another question depending on that problem (maybe) regards the BW Publisher: There is a role for publishing content, this role have the essential rights and the role is added to the corresponding SAP system folder under the SAP structure in the CMC. But if you want to piblish a Crystal Reports report as a BW-User that is a member of the role but is not imported in the CMC you get the error EAS 30001(An error occurred when synchronizing folder hierarchy for role) which means that the user does not have sufficient rights to publish reports. If I put the role to the administrator group everything works fine except that the reports creates a folder structure SAP\2.0\*SYSTEM\New Object11552\New Object11553\REPORT*. Why are the folder "New Object11552" and "New Object11553" created and what's the problem with the rights?
I appreciate any hints what else I can do - because as I mentioned above a complete new-install is not really a opportunity.
Thanks in advance!

Thanks Heiko and Ingo for your responses!
@Heiko
Hi Heiko, I couldn't find the SAP JCO 2.1.9 version to download - so I tried the 2.1.10 version; but still the same problem
@Ingo
Hi Ingo,
>>so the SAP Authentication in the CMC is available and you are able to import the SAP Roles ?
yes, the SAP Authentication in the CMC is available and I'm able to import SAP roles - that works absolutely fine; it's just that users can't select the SAP-Authentication method for the logon.
>>EAS 30001
ok, that was also my idea that it is important that the sap user who want's to publish content is imported in the cmc - but because of the problem that the sap authentication is not available at logon that's currently not possible. So, I think if this problem is solved - the problem with EAS 30001 is also gone.
>>Make sure the role as descriptions in transaction PFCG in all the languages that you use for publishing
you're absolutely correct - that was the problem! Thanks Ingo! Could you explain what are the steps I have to do to translate the description of a role in transaction SE63 after I created the role in the transaction PFCG or do you have a link with the HowTo for me? Hope we'll also find a solution for the missing SAP-Authentication method.
Mario

Cacao agent is not available

Similar Messages

Maybe you are looking for