Cache Cleaner ruined my menu bar, no longer able to screen shot

not sure if anyone is familiar with this application "Yosemite Cache Cleaner". i just started using it. tried out the light scan and auto restored my computer then messed my top menu bar... well its off screen i can not see the time or the wifi icon it almost looks like the other half of the menu bar is on another screen by HDMI but in this case its not. i have nothing connected to this computer but my midi controller and a pre amp (always) anyways . i have dropbox and g-drive installed i can see those but any notification that pops up i can only see half of it. so of course i contacted this company immediately. i get a response back they are asking me to "screen shot my problem" so i try to screen shot and nothing happens, my screen flashes once and then the more i tried, the more screen flashed with an error sound. can anyone please help me solve this problem?

First, delete the fake "utility," which is a scam. Caches don't need to be "cleaned."
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • Menu bar no longer on both screens.

    I just upgraded from Mavericks to Yosemite. I use two monitors and I really like having the menu bar available on both screens, which was new to Mavericks. I also use spaces heavily to manage having several applications running at the same time. For example on one space I will have an internet browser on one monitor and my finder window on another. Then I will have another space with a coding application and another browser for pre-viewing web page designs, then another with Adobe photoshop and Illustrator on either screen. I like to keep the spaces linked so I don't get too lost moving back and forth between spaces.
    The problem is, now in Yosemite when I link the spaces together so it switches both screens at the same time the menu bar only appears on the primary monitor. Then if I am using an application like photoshop which relies a lot on the menu bar for funcionality, and it is on the secondary monitor I have to go all the way over to the opposite monitor to access the menu.
    Does anyone know if there is a way to keep the spaces linked without the menu bar disappearing?

    After not using the computer for 30 minutes, the menu bar is now working again.  Must be a bug...

  • Menu bar no longer appears in full screen mode

    For some reason today my menu bar no longer shows up when I move the mouse to the top of the screen in any application.  I have tried restarting several times, opening and closing applications, taking apps in and out of full screen, ran disk utility.  All to no avail.
    Not sure if this is related, but I attached an external drive and booted to the recovery volume on my mac to install Lion on the external drive.  It hung at the download so I quit and rebooted to my main drive.  Everything worked normally except for the menu bar.
    Software up to date, 2008 MacBook Pro with no attachments.
    Any ideas?

    After not using the computer for 30 minutes, the menu bar is now working again.  Must be a bug...

  • I have a VI with menu barattached i want to remove the menu bar.I am able to remove the menu bar in run continuously mode.but not in normal mode how do i do it in normal mode

    I have a VI with menu bar.I am able to remove menu bar in continuous mode by setting window appearence.But i want the menu bar to be removed at normal mode also.How do i do it

    You can trun off the menu while the VI is running by going into the VI properties (right click on the VI icon and select 'Properties). Then from the Catagory selestion box, select Window Appearance, click the Customize button, then uncheck the Show Menu Bar check box and hit OK twice. That shold do it.
    Note that this will only turn off the menu while the VI is running. The standard menu will always be showing when the VI is not running.
    Ed
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

  • Menu bar does not show on screen?

    Menu bar does not show on screen.

    I'll assume your profile is wrong (10.4.7?) and you are using Lion in full screen mode.  If so click the double arrows in the menu bar which should appeare if you mouse into the menu bar area.
    If that isn't the case then are you zoomed in?  Contol + fingler drag on mouse (or scroll wheel) zooms in or out (see Mouse preferences, Screen Zoom, look at the little movie).

  • Menu bar no longer working with IE update

    With the recent update in IE my main menu bar is no longer working, the "hover" function is not working and looks like the links are broken, but the links do work if you actually click on them.  From my vista machine it is OK but from my XP machine it does not show as being a link. The submenu's however do still work, here is the code, the first line is from the main menu and doesn't work, the 2nd line is a submenu and does work.
    Here is the site www.conundrumadventures.com
    From the main menu this is the code for "Adventures":
    <td id="002" class="link4" onclick="location.href='Teambuilding-Exercises-Adventures.php'"; onmouseover="changeC('002','link4h');" onmouseout="changeC('002','link4');" >Adventures</td>
            </tr>
            <tr>
    From within the adventures page here is the code for the submenu for  "Conundrum Metro":
              <td id="303" class="Sublink4" onclick="location.href='Outdoor-Team-Building.php'"; onmouseover="subchangeC('303','Sublink4h');" onmouseout="subchangeC('303','Sublink4');" >Conundrum Metro</td>
            </tr>
    Any ideas how to fix the main menu bar?
    Thanks
    Lynn

    I recommend doing away with your mouseover/mouseout links and convert to using Cascading Style Sheets.
    Here is a link to CSS tutorials: http://www.adobe.com/devnet/dreamweaver/css.html
    You don't say whether you are using Dreamweaver CS4 or an earlier version, but even if you are using that earlier version, you can type the code in yourself. Look especially at the tutorial chain "Designing with CSS", as there is a module that talks about a menu bar and how to make the links.
    Best wishes,
    Beth

  • Cs4 full screen mode w/ menu bar no longer can scroll picture off edges

    In earlier versions' full screen mode with menu bar, if I zoom into a photo I can scroll the edge of the photo away from the windows edge, making it easier to select and work on the corners of the photo.
    In cs4, I can't get that to work. Any ideas?

    Works for me... What graphics card? Screen resolution? General computer info?
    Mylenium

  • Time machine icon in Menu bar no longer rotates during backups

    Ever since upgrading to Mavericks, the Time Machine icon in my menu bar does not turn while it's doing a backup.  I have to click on it to see whether it's doing a backup.  This started with Mavericks, and was not fixed in 10.9.1.   Will it be addressed in 10.9.2?

    That's just the way it is now.
    Apple - Mac OS X - Feedback

  • The Menu Bar no longer integrates with the Global Menu Bar on Ubuntu

    I'm using Gnome Ubuntu 12.04 (I believe it's Unity,) and my Firefox Nightly build's menu bar (File, Edit, View, etc,) appears in a bar of its own.
    Here's a screenshot: http://i.imgur.com/Evbdo.png
    I have already tried reinstalling firefox-globalmenu many different ways, but it seems that Nightly just doesn't want to accept it. (NOTE: My Beta build works fine.)

    It works on my Canonical (18.0a2) Aurora; but I use Mozilla nightly.
    I would just assume that there is not at the moment a compatible version of firefox globalmenu add-on available for your nightly.
    * see https://answers.launchpad.net/globalmenu-extension/+question/200848
    I imagine you could ask there for an answer about when or if a suitable extension will be released.

  • The "Remember Password" volatile menu bar no longer displays when I enter a required site login/password data.

    When I attempt to log into a site that requires login / password data, the pop-up menu bar that would ask whether to save this password data or not momentarily displays then disappears befor I can tick my choice.
    I tried re-installing Firefox but that didn't change the situation.
    Please help as I can't log into a local server any more that requires login / password credentials.

    I restarted the computer and checked what errors it was returning, these are all the errors i got.
    May 17 19:54:47 scott-sanders-computer configd[45]: WirelessAirPortDeviceNameCopy(): no AirPort driver found
    May 17 19:54:48 scott-sanders-computer shutdown: reboot by scottsanders:
    May 17 19:54:48 scott-sanders-computer kernel[0]: (161: ps)tfp: failed on 0:
    May 17 19:54:48 scott-sanders-computer SystemStarter[145]: authentication service (153) did not complete successfully
    May 17 19:54:48 scott-sanders-computer kernel[0]: (161: ps)tfp: failed on 0:
    May 17 19:54:50 scott-sanders-computer kernel[0]: (186: ps)tfp: failed on 0:
    May 17 19:54:50 scott-sanders-computer SystemStarter[145]: The following StartupItems failed to properly start:
    May 17 19:54:50 scott-sanders-computer kernel[0]: (186: ps)tfp: failed on 0:
    May 17 19:54:50 scott-sanders-computer SystemStarter[145]: /System/Library/StartupItems/AuthServer
    MacBook Pro   Mac OS X (10.4.6)  

  • How to disable the menu bar from hiding and fix screen?

    I've looked thoughly to find the answer online, system preferences and here with no luck. I recently updated my software to Mac OS X 10.7.4. Now the menu bar is automatically hiding, but reapearing when I mouse over and the screen in all windows are too wide and long. When I click the 'green' icon for resizing the window, it sizes it too wide and long. I am not in full screen and do not have enlarge on (COMMAND +) and i've check the display settings. Maybe Mac added this as a feature with the update thinking people will like it but I don't like it at all, my typing in an email is not visable on the right. Can someone please tell me how to turn this feature off? Also the resolution/clarity of my screen is not as good since the update. It is not much of a difference but enough to make my eyes hurt a bit.
    thanks for your help!

    Yes it is Aluminium. Yes I checked that it is set to 1280 by 800 and changed the resolution and changed it back many times to see if that would help. Is this not a new feature with the new OS X update? Thanks

  • Menu bar at upper left of screen not visible

    I have lost the menu bar that appears in the upper left corner of the screen ("File", "Edit", "View", etc., as well as the back/forward arrows). I restored it on Internet Explorer -- how do I restore it on Firefox?
    == This happened ==
    Every time Firefox opened
    == I tried (finally successfuly) to get rid of AOL

    Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark.

  • Menu bar auto hiding in full screen

    Using OS X Mavericks and all of aa sudden when ever i use full screen mode in any app the menu bar autohides.  Is there a setting somewhere where i can turn this feature off?

    Thats the entire point of full screen mode, is to hide all Mac OS stuff. And in certain apps, that will hide some of it's own stuff. Like for example Safari, it will hide the "favorites". While the address bar and "tabbed" windows stay visible.
    KOT

  • Why does the white menu bar stay when in full screen?

    Shortly after up grading to 3.4.1 this stated to happen:
    1. I open App, not in full screen
    2. press the "f" key, it's takes me to full screen mode but the white Aperture menu bar remains at the top, hideing adjustments.
    3. I press the "f" key to get out of full screen & I loose both full screen & the "regular" viewer.
    Not sure what's going on....by the way, it sometimes functions without this problem.
    Any thoughts out there?
    Thanks.

    Chrome may somehow be set to run in full-screen mode. I don't use Chrome so can't check its settings options, but try hitting ESC when Chrome is doing this and see if you get the menubar and Dock to reappear.
    OS X Mavericks: Take apps full screen

  • Spry Menu Bar goes to left of screen

    I've done a horizontal Spry Menu Bar and drop down menu on one of the  menu buttons.
    When I roll over this, the entire Menu Bar drops down to  the left hand side of the screen in a vertical format - would anyone  know why?
    I'm a complete newby to this, so small words is appreciated LOL

    Hi,
    Can you post a link to your problem page.
    Regards
    Manoj

Maybe you are looking for

  • Shot dump while opening the Infopackage

    Hi Guys, In Testing system. i have first started a Init load but it got fail. So the messge it gave me is to replicate the datasource.and i did replicated and activated the trasferstructure. After that when i want to open the IP to re init again its

  • Anytime I move my mouse my current window disappears. I move the mouse to the top left corner and then I comes back. How can I turn this off?

    Anytime I move my mouse my current window that is open disappears. When I move my mouse to the top left corner it comes back. How do I turn this off? It's not a Zoom issue, it disappears completely. Help please.

  • Recording Dates in Results Recording

    Hi. I have an inspection with a task list.  Several samples will be tested each time an inspection lot is created.  I have a number of MICs that are quantitative / calculated to determine results of lab testing - this is all working great.  The probl

  • Manual Extrenal Bank Reconciliation

    Hi Experts Can anyone explain me, which amount we should put in Ending balance as a parameter in Manual Reconciliation? Is there any study materail available on Manual Reconciliation in SAP B1 2007 B ? Regards Kamlesh Vagal

  • Contextual Menu Layer Selection for CS4 and 5.x

    Hi all, I'm looking for a way to get contextual menu layer selection functioning better in Photoshop. Right clicking on a layer provides a menu but does not necessarily select the top layer automatically. If the layer is grouped, it will generally sh