Cache control directives for Weblogic 6.1

Hello:
I was wondering if anyone knew if one could configure Weblogic 6.1 to produce
cache control headers (ie "Cache-control: max-age=1800")? I realize that I should
probably be using a conventional HTTP server and the WLS plugin, but I'm just
doing some research here. So any help would be appreciated.
Thanks,
Scott Resnik

Can you show us your obj.conf file?
Thanks
Manish

Similar Messages

  • Cache control directives in iPlanet 4.1 (SunOS 5.7)

    Using the admin gui (Content Mgmt->Cache Control Directives), I set the cache control to "No Cache" for the entire server; however, clients still seem to cache pages from the server (IE6 on winxp does not go to the server for pages it has seen before). I looked at the response headers using wget on solaris (as well as wfetch on winxp), and I don't see the Cache-Control header. Here is what I get back after requesting a page from the server:
    HTTP/1.1 200 OK
    Server: Netscape-Enterprise/4.1
    Date: Wed, 31 Dec 2003 14:01:13 GMT
    Content-type: text/html
    Content-length: 120
    Connection: keep-alive
    I restarted the server, and the admin gui shows the correct ("No Cache") setting for the server.
    Thanks in advance for any ideas on how to get the server to ask the client not to cache the pages.

    Can you show us your obj.conf file?
    Thanks
    Manish

  • Multiple Cache-Control Directives- iPlanet

    Hi,
    Quick question: I'm running iPlanet 4 and want to add 2 cache control directives to the same directory. I want to add a max-age of 1 and a must-revalidate directive. Is this possible? The behavior I was seeing is that only 1 directive was being sent along with the request/response to the client. The end result I want is that the client will check (almost) every request for a file and if it is new pull that file, if not allow the cache'd version to be used.
    Thanks in advance,
    Jason
    obj.conf:
    <Object ppath="/www/iplanet/site_docroots/plannet/p/*">
    PathCheck fn="set-cache-control" control="max-age=1"
    </Object>
    <Object ppath="/www/iplanet/site_docroots/plannet/p/*">
    PathCheck fn="set-cache-control" control="must-revalidate"
    </Object>

    PathCheck fn="set-cache-control" control="max-age=1,must-revalidate"

  • Seeking User Feedback on Future Direction for WebLogic Server Tools

    My apologies for cross-posting, but I wanted to make sure that as many of WebLogic Server Tools users as possible see this blog posting and get a chance to express their opinions.
    http://dev2dev.bea.com/blog/kosta/archive/2007/09/seeking_user_feedback_on_futur.html

    Hi Dan,
    I tried to change the hostname from workstation IP(192.168.1.3) to workstation name(home-mittal). Also, I tried to specify localhost as HostName while configuration in Oracle BPM Server for Weblogic but still I am getting the same issue.
    I have tried pinging what u specifed and response was there.
    WLST Failed!!!
    Please suggest and it is very urgent.
    Thanks,
    Abhishek

  • How can we get iWS4 to use the cache control directive no-store on pages generated through a NSAPI filter?

     

    You shouldn't have to do anything at all, it should work right out of the box.
    First thing to do + questions.
    Open a new project, create an External MIDI track, set the track to record, start Logic recording, play a few notes with sustain pedal down/up a few times. Open Logic's LIST editor and look at the data being recorded. What are you showing for sustain pedal events? What numbers?
    That will give everyone here an idea of what's going on.
    Like I said.... I've never had to do anything.
    Also, this could possibly be a problem with "Control Surfaces" assigning a non compatible control surface.
    As a precaution delete the CS preference file.
    With Logic not running:
    Delete the control surfaces file.
    In the Finder, choose Go > Go to Folder from the menu.
    Type ~/Library/Preferences in the "Go to the folder" field. (be sure and use the ~ tilde in the path)
    Press the Go button.
    If you are having trouble with a control surface in Logic Pro.
    then delete the com.apple.logic.pro.cs file from the preferences folder.
    The file is rebuilt next time you boot Logic.

  • Selective Cache-control in the web server

    I am using weblogic 8.1 as the app server and Sun one 6.1 as the web server
    In my obj.conf of the web server we have this
    PathCheck fn="set-cache-control" control="private"
    This caches all the pages.
    But I don't want some pages to be cached in our site.
    For this, I tried setting "no-cache" for the "Cache-control " of the response hedear, in corresponding jsps. But the webserver configuration is overriding this.
    This configuration set in the webserver should be applicable for all the modules except for some urls .
    can anybody tell me how to make this selective cache-control configuration in the obj.conf of sun one web server.
    or if there is any way to prevent the set up in jsp from being overridden this webserver ?
    Also it would be great if anybody can explain, what are the services handled by the web server and the the app-server and how they interact with each other....

    It's unfortunate that JSPs running in WebLogic can't override the default Cache-Control directives in Web Server. That's probably a bug in the WebLogic plugin. (It is possible for JSPs running directly on Web Server to override the default Cache-Control directives.)
    As with any obj.conf directive, you can configure Cache-Control directives on a path-by-path basis. For example, the following would set Cache-Control: no-cache for /foo/*.jsp and Cache-Control: private for all other URIs:<Object ppath="/foo/*.jsp">
    PathCheck fn="set-cache-control" control="no-cache"
    </Object>
    <Object name="default">
    PathCheck fn="set-cache-control" control="private"
    </Object>Information on obj.conf syntax, including how to configure separate objects for separate paths, can be found in the Syntax and use of obj.conf chapter of the NSAPI Programmer's Guide at http://docs.sun.com/source/817-6252/npgobjcn.html.
    I'm not sure what you mean by "what are the services handled by the web server and the the app-server and how they interact with each other". However, it's worth noting that Sun ONE Web Server 6.1 is fully capable of running JSPs by itself; there's no need for a separate WebLogic server.

  • Cache control in wml

    hi,
    I am getting problem in cache controlling in wml page for example a image displayed on the page is not displaying again but i am getting same in the console..help me out....

    It's unfortunate that JSPs running in WebLogic can't override the default Cache-Control directives in Web Server. That's probably a bug in the WebLogic plugin. (It is possible for JSPs running directly on Web Server to override the default Cache-Control directives.)
    As with any obj.conf directive, you can configure Cache-Control directives on a path-by-path basis. For example, the following would set Cache-Control: no-cache for /foo/*.jsp and Cache-Control: private for all other URIs:<Object ppath="/foo/*.jsp">
    PathCheck fn="set-cache-control" control="no-cache"
    </Object>
    <Object name="default">
    PathCheck fn="set-cache-control" control="private"
    </Object>Information on obj.conf syntax, including how to configure separate objects for separate paths, can be found in the Syntax and use of obj.conf chapter of the NSAPI Programmer's Guide at http://docs.sun.com/source/817-6252/npgobjcn.html.
    I'm not sure what you mean by "what are the services handled by the web server and the the app-server and how they interact with each other". However, it's worth noting that Sun ONE Web Server 6.1 is fully capable of running JSPs by itself; there's no need for a separate WebLogic server.

  • Cache-Control in OC4J

    We had very typical problem in our web application.
    We are using Oracle AppServer 10.1.2. on Sun Solaris with Web-Cache Enabled.
    When we are trying to access the pages the response object contains multiple Cache-Control headers, though we have not explicitly added through our code. Can any one tell me how to delete the response headers through code or at server settings. I have tried with "reset()" but of no use.
    Because of this cache problem we are not able to generate the reports but the same it working with Firefox browser.
    Thanks in advance.
    Kishore

    It's unfortunate that JSPs running in WebLogic can't override the default Cache-Control directives in Web Server. That's probably a bug in the WebLogic plugin. (It is possible for JSPs running directly on Web Server to override the default Cache-Control directives.)
    As with any obj.conf directive, you can configure Cache-Control directives on a path-by-path basis. For example, the following would set Cache-Control: no-cache for /foo/*.jsp and Cache-Control: private for all other URIs:<Object ppath="/foo/*.jsp">
    PathCheck fn="set-cache-control" control="no-cache"
    </Object>
    <Object name="default">
    PathCheck fn="set-cache-control" control="private"
    </Object>Information on obj.conf syntax, including how to configure separate objects for separate paths, can be found in the Syntax and use of obj.conf chapter of the NSAPI Programmer's Guide at http://docs.sun.com/source/817-6252/npgobjcn.html.
    I'm not sure what you mean by "what are the services handled by the web server and the the app-server and how they interact with each other". However, it's worth noting that Sun ONE Web Server 6.1 is fully capable of running JSPs by itself; there's no need for a separate WebLogic server.

  • CE HTTP 1.1 and Cache Control

    Hi all,
    I have two questions concerning CE and HTTP 1.1:
    1) Does anyone know what happens on a Content Engine if a web server uses the HTTP 1.1 Cache-Control directive with the value PUBLIC?
    How long does the object remain in cache?
    2) What happens if I set http max-ttl in global configuration? Does this overwrite the Cache-Control directive?
    Thanks in advance
    Fausto

    I have noticed that when the cache-control directive set to no-cache="set-cookie", the Cache Engine receives incoming HTTP 1.1 Requests, but there is no hit in the cache. Wondering why the Content Engine fails to cache this? I haven't tried the value public.

  • Weblogic setting Cache-control: no-cache?

    I have a servlet filter that sets the Cache-control http header to "max-age=30" for static files such as *.css but in the end weblogic sends the value "no-cache".
    When the browser asks for the same static file again weblogic responds with http 304 and Cache-control "max-age=0" thus overriding my filter again.
    Is there any way to change the client side caching in weblogic (10.3.4)?
    (btw the servlet filter works in tomcat)

    Hi,
    1. response.setHeader("Cache-Control","no-cache");
    This is used to prevent the browser from caching your dynamic content generated by a JSP or Servlet.
    You set this attribute in the HTTP header of the response object which would tell the browser not to cache this content. So everytime you request the page again, the browser would make a new request, instead of showing you a cached page.
    2. response.setHeader("Location", "error.html");
    This is called redirecting. "Redirecting" is sending a response from your servlet to the browser telling the browser to go to a new location(make a new request)
    The standard way to do this response.sendRedirect(String);

  • JRE Cache ignores the "Expire" and "Cache-Control: no-cache" directives.

    My applet is using HttpURLConection to retrieve data from a server with Caching enabled. The cache contents are "revalidated" (via "if-modfied-since") each time the applet is started. However, subsequent requests to retrieve the same resource are always read from the cache with no validation even if the resource has expired.
    The server is sending a valid "Expires:" tag and "Cache-Control: no-cache" tag in the response; but, the JRE refuses to recheck for an updated version of the resource even after the file has expired.
    The JRE does seem to understand the "Cache-Control: no-store" tag; but, this is inefficient (no caching at all) when I'm tring to get it to not refetch the resource unless there's a change. Is there some other tag that the JRE is expecting to see?

    I have a similar problem except that I want my pages to not cache at all. The server is setting the Cache-Control: max-age to 0 and the Expires to "now" but JRE seems to ignore these settings, but only sometimes. Sometimes pages are fetched from cache and sometimes from the server.
    In my applet I'm using a normal URLConnection like this:
    URLConnection uc = new URL("http://<server>/method").openConnection();
    uc.connect();
    InputStream is = uc.getInputStream();
    is.read();When my request headers look like this:
    accept-encoding: gzip
    Host: <server>
    Cache-Control: no-cache
    Pragma: no-cache
    User-Agent: Mozilla/4.0 (Windows XP 5.1) Java/1.6.0_13
    Accept: text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
    Connection: keep-alivethe page will not be cached and is requested again but this time without the accept-encoding, Pragma and Cache-Control. The adding (and removal) of the headers seems to happen inside the JRE, though. I'm not explicitly setting them.
    The response header of the first request looks like this:
    HTTP/1.1 200 OK
    Date: Wed, 20 May 2009 12:55:07 GMT
    Server: Apache/2.2.11 (Win32) mod_jk/1.2.26 PHP/5.2.8
    Cache-Control: max-age=0
    Expires: Wed, 20 May 2009 12:55:07 GMT
    Vary: User-Agent,Accept-Encoding
    Content-Encoding: gzip
    Keep-Alive: timeout=120, max=79
    Connection: Keep-Alive
    Transfer-Encoding: chunked
    Content-Type: text/html;charset=iso-8859-1When the request is made with this header:
    User-Agent: Mozilla/4.0 (Windows XP 5.1) Java/1.6.0_13
    Host: <server>
    Accept: text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
    Connection: keep-aliveThe response headers looks like this:
    HTTP/1.1 200 OK
    Date: Wed, 20 May 2009 12:55:07 GMT
    Server: Apache/2.2.11 (Win32) mod_jk/1.2.26 PHP/5.2.8
    Content-Length: 1016
    Cache-Control: max-age=0
    Expires: Wed, 20 May 2009 12:55:07 GMT
    Vary: User-Agent,Accept-Encoding
    Keep-Alive: timeout=120, max=83
    Connection: Keep-Alive
    Content-Type: text/html;charset=iso-8859-1And in this case the JRE sometimes fetches the request from the server and sometimes from cache. I have not been able to determine how the JRE decides to refresh, or why it sometimes sends an accept-encoding and Pragma header and sometimes not.
    any help would be appreciated.
    Alex

  • Cache-control for browser in WL

    Hi,
    Is there way to remove the cache-control of the browser from property file?
    I found someone suggests this method to avoid "page expire" message from
    browser on the web but I can not found any setting in WL's property file.
    Please help!
    Thanks.
    Eric W.

    This cannot be set in the weblogic.properties file.
    However you can set it on each of your .jsp or html pages
    by manipulating meta tags.
    <META HTTP-EQUIV="Expires" CONTENT="0">
    <META HTTP-EQUIV="Pragma" CONTENT="No-cache">
    <META HTTP-EQUIV="Cache-Control" CONTENT="private">
    "Eric Wu" <[email protected]> wrote:
    Hi,
    Is there way to remove the cache-control of the browser
    from property file?
    I found someone suggests this method to avoid "page expire"
    message from
    browser on the web but I can not found any setting in
    WL's property file.
    Please help!
    Thanks.
    Eric W.

  • Reader X doesn't display Pdf stream if response contains header "Cache-Control: no-store, no-cache"

    Hi all,
    I work on a web application that, among others, generates Pdf documents. It renders them directly within the IE window by "streaming" the content of the Pdf in the response output stream. Note that we also add the header "Cache-Control", "no-store, no-cache, must-revalidate,post-check=0, pre-check=0" to the response.
    Everything was fine with previous version of reader but since I installed Adobe reader X the content of the Pdf is not showing any more in my browser.
    Here is what I already investigated:
    - if I use another machine with an "older" Reader version, it works. If I save the displayed Pdf and try to open it on the machine where X is installed  it works
    - if I remove the the Cache-Control header, then it works with reader X installation
    Do you have any idea what changed between version 9 and X that could lead to this issue ?
    To ease diagnostic I created a sandbox environment to reproduce the problem, you can go to the following address to see what's happening (or not in case you have version X installed)
    With the Cache-Control header: http://readerxissue.appspot.com
    Without the Cache-Control header: http://readerxissue.appspot.com/enableCache.html
    I must confess that I am a bit stuck and I wonder if some of you could help.
    Thanks a lot
    Regards
    Vincent

    Hello,
    We have semiliar problems in sweden with Adobe Reader X 10.1 Swe and Internet Explorer 8.0 with streamed PDF files.
    We had some issues and got them resolved by the following
    Upgraded to Adobe Reader 10.1.2.45 Eng
    - Print Issue:http://helpx.adobe.com/acrobat/kb/pdf-wont-print-reader-10.html
    - Grey box in Internet explorer: http://helpx.adobe.com/acrobat/kb/pdf-opens-grey-screen-browser.html
    - Add site as trusted: Edit-> Preferences, unbox Enable Enhanced Security + add the host/url to site that is whitelisted to send pdf files
    (the Automaticly trust sites from mu Win OS security zones doesnt work for us)
    The thing is we run MUI pack on our Citrix servers and want Adobe Reader in Swe but it havent been translated yet...
    So we have to wait for the swedish release on Adobe Reader X 10.1.2
    Thanks,
    Tony Van Der Haagen
    IT-Mästaren
    Sweden

  • Setup issues: Apache plugin for Weblogic

    Hi,
    I've spent couple of days without success trying to configure apache plugin for weblogic. I've configured in accordance with bea documentation and it works fine in windows environment but fails in Solaris 9.
    Plugin log file says it's processed the request successfully but I see error message in browser saying it can't find the jsp file. It works fine if I access the weblogic box directly without going through apache.
    I'm using Weblogic 8.1 SP2, single server.
    Please find below the messages appear in browser, plugin logs, and apache version.
    Thanks in advance for your help.
    ======================Browser Error Message================
    JSP Processing Error
    HTTP Error Code: 404
    Error Message:JSPG0036E: Failed to find resource /AppConsole/common/login.jsp
    Root Cause:java.io.FileNotFoundException: JSPG0036E: Failed to find resource /AppConsole/common/login.jsp     at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.findWrapper(JSPExtensionProcessor.java:246)     at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:228)     at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2841)     at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220)     at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204)     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681)     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276)     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201)     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021)     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1332)
    ======================Browser Error Message End================
    ==========Apache version============
    Please find apache version and plugin logs below:
    # ./apachectl -v
    Server version: IBM_HTTP_Server/6.0 Apache/2.0.47
    Server built: Nov 4 2004 09:58:18
    ==========Apache version End============
    =================Plugin Logs================
    ================New Request: [GET /AppConsole/ HTTP/1.1] =================
    Mon Jun 12 08:20:14 2006 INFO: SSL is not configured
    Mon Jun 12 08:20:14 2006 After trimming path: '/AppConsole/'
    Mon Jun 12 08:20:14 2006 The final request string is '/AppConsole/'
    Mon Jun 12 08:20:14 2006 SEARCHING id=[83.231.147.129:27110] from current ID=[83.231.147.129:27110]
    Mon Jun 12 08:20:14 2006 @@@FOUND...id=[83.231.147.129:27110], server_name=[83.231.147.65], server_port=[80]
    Mon Jun 12 08:20:14 2006 attempt #0 out of a max of 5
    Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110/27110 at line 1981 for '/AppConsole/'
    Mon Jun 12 08:20:14 2006 INFO: New NON-SSL URL
    Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Via]=[1.0 NMUKPER]
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Host]=[83.231.147.65]
    Mon Jun 12 08:20:14 2006 URL::sendHeaders(): meth='GET' file='/AppConsole/' protocol='HTTP/1.1'
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Via]=[1.0 NMUKPER]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Host]=[83.231.147.65]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Connection]=[Keep-Alive]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-SSL]=[false]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-Client-IP]=[62.172.128.4]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Proxy-Client-IP]=[62.172.128.4]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-Forwarded-For]=[62.172.128.4]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
    Mon Jun 12 08:20:14 2006 INFO: sysSend 639
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Content-Type]=[text/html]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-Hash]=[mx4NFnJY0ypWiiF1G2lM080SToc]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Transfer-Encoding]=[chunked]
    Mon Jun 12 08:20:14 2006 parsed all headers OK
    Mon Jun 12 08:20:14 2006 Hdrs to client:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
    Mon Jun 12 08:20:14 2006 Hdrs to client:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
    Mon Jun 12 08:20:14 2006 Hdrs to client:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
    Mon Jun 12 08:20:14 2006 Hdrs to client:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
    Mon Jun 12 08:20:14 2006 Hdrs to client:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
    Mon Jun 12 08:20:14 2006 canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
    Mon Jun 12 08:20:14 2006 closeConnection in load_utils: deleting URL*
    Mon Jun 12 08:20:14 2006 request [AppConsole/] processed sucessfully..................
    =================Plugin Logs End================

    Yes it is IBM Http Server, but it works fine from Windows accessing the same weblogic server I'm trying to connect from Solaris.
    I see 500 error in the apache access log file.
    I've also tried with by setting "MaxRequestsPerChild" to 0 in the apache config file but no good.
    Please find below httpd.conf file content.
    ==============httpd.conf===============
    ServerName eus0000168.eu.verio.net
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/opt/IBMIHS" will be interpreted by the
    # server as "/opt/IBMIHS/logs/foo.log".
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # NOTE! If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation (available
    # at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
    # you will save yourself a lot of trouble.
    # Do NOT add a slash at the end of the directory path.
    ServerRoot "/opt/IBMIHS"
    # The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
    #LockFile logs/accept.lock
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile logs/httpd.pid
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 10
    ## Server-Pool Size Regulation (MPM specific)
    # worker MPM
    # ThreadLimit: maximum setting of ThreadsPerChild
    # ServerLimit: maximum setting of StartServers
    # StartServers: initial number of server processes to start
    # MaxClients: maximum number of simultaneous client connections
    # MinSpareThreads: minimum number of worker threads which are kept spare
    # MaxSpareThreads: maximum number of worker threads which are kept spare
    # ThreadsPerChild: constant number of worker threads in each server process
    # MaxRequestsPerChild: maximum number of requests a server process serves
    <IfModule worker.c>
    #StartServers 5
    StartServers 1
    MaxClients 150
    MinSpareThreads 25
    MaxSpareThreads 75
    ThreadsPerChild 25
    MaxRequestsPerChild 1000
    </IfModule>
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, in addition to the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
    # Change this to "Listen 0.0.0.0:port" to restrict the server to
    # IPv4.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule access_module modules/mod_access.so
    LoadModule auth_module modules/mod_auth.so
    #LoadModule auth_anon_module modules/mod_auth_anon.so
    LoadModule auth_dbm_module modules/mod_auth_dbm.so
    LoadModule include_module modules/mod_include.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule env_module modules/mod_env.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    LoadModule usertrack_module modules/mod_usertrack.so
    LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    #LoadModule proxy_module modules/mod_proxy.so
    #LoadModule proxy_connect_module modules/mod_proxy_connect.so
    #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    #LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule dav_module modules/mod_dav.so
    LoadModule autoindex_module modules/mod_autoindex.so
    LoadModule asis_module modules/mod_asis.so
    #LoadModule info_module modules/mod_info.so
    LoadModule cgid_module modules/mod_cgid.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule imap_module modules/mod_imap.so
    LoadModule actions_module modules/mod_actions.so
    #LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule rewrite_module modules/mod_rewrite.so
    #LoadModule deflate_module modules/mod_deflate.so
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    #LoadModule status_module modules/mod_status.so
    <IfModule mod_status.c>
    ExtendedStatus On
    </IfModule>
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
    # . On HPUX you may not be able to use shared memory as nobody, and the
    # suggested workaround is to create a user www and use that user.
    # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
    # when the value of (unsigned)Group is above 60000;
    # don't use Group #-1 on these systems!
    User nobody
    Group nobody
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If this is not set to valid DNS name for your host, server-generated
    # redirections will not work. See also the UseCanonicalName directive.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address anyway, and this will make
    # redirections work in a sensible way.
    #ServerName new.host.name:80
    # UseCanonicalName: Determines how Apache constructs self-referencing
    # URLs and the SERVER_NAME and SERVER_PORT variables.
    # When set "Off", Apache will use the Hostname and Port supplied
    # by the client. When set "On", Apache will use the value of the
    # ServerName directive.
    UseCanonicalName Off
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    #DocumentRoot "/opt/IBMIHS/htdocs/en_US"
    #DocumentRoot "/www/a"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/opt/IBMIHS/htdocs/en_US">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs-2.0/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory that is appended onto a user's home
    # directory if a ~user request is received.
    UserDir public_html
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit Indexes
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    # The index.html.var file (a type-map) is used to deliver content-
    # negotiated documents. The MultiViews Option can be used for the
    # same purpose, but it is much slower.
    DirectoryIndex index.html index.html.var
    # AccessFileName: The name of the file to look for in each directory
    # for additional configuration directives. See also the AllowOverride
    # directive.
    AccessFileName .htaccess
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    </Files>
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    TypesConfig conf/mime.types
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    <IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # EnableMMAP: Control whether memory-mapping is used to deliver
    # files (assuming that the underlying OS supports it).
    # The default is on; turn this off if you serve from NFS-mounted
    # filesystems. On some systems, turning it off (regardless of
    # filesystem) can improve performance; for details, please see
    # http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
    # EnableMMAP off
    # EnableSendfile: Control whether the sendfile kernel support is
    # used to deliver files (assuming that the OS supports it).
    # The default is on; turn this off if you serve from NFS-mounted
    # filesystems. Please see
    # http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
    EnableSendfile off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog logs/error_log
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel debug
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog logs/access_log common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog logs/referer_log referer
    #CustomLog logs/agent_log agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog logs/access_log combined
    # ServerTokens
    # This directive configures what you return as the Server HTTP response
    # Header. The default is 'Full' which sends information about the OS-Type
    # and compiled in modules.
    # Set to one of: Full | OS | Minor | Minimal | Major | Prod
    # where Full conveys the most information, and Prod the least.
    ServerTokens Prod
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (internal error documents, FTP directory
    # listings, mod_status and mod_info output etc., but not CGI generated
    # documents or custom error documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature Off
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/". If the fakename is slash-terminated, then the
    # realname must also be slash terminated, and if the fakename omits the
    # trailing slash, the realname must also omit it.
    # We include the /icons/ alias for FancyIndexed directory listings. If you
    # do not use FancyIndexing, you may comment this out.
    Alias /icons/ "/opt/IBMIHS/icons/"
    <Directory "/opt/IBMIHS/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "/opt/IBMIHS/cgi-bin/"
    <IfModule mod_cgid.c>
    # Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
    # for setting UNIX socket for communicating with cgid.
    #Scriptsock logs/cgisock
    </IfModule>
    # "/opt/IBMIHS/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/opt/IBMIHS/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Directives controlling the display of server-generated directory listings.
    # IndexOptions: Controls the appearance of server-generated directory
    # listings.
    IndexOptions FancyIndexing VersionSort
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    ReadmeName README.html
    HeaderName HEADER.html
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz
    # AddType allows you to add to or override the MIME configuration
    # file mime.types for specific file types.
    AddType application/x-tar .tgz
    AddType image/x-icon .ico
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For files that include their own HTTP headers:
    #AddHandler send-as-is asis
    # For server-parsed imagemap files:
    #AddHandler imap-file map
    # For type maps (negotiated resources):
    # (This is enabled by default to allow the Apache "It Worked" page
    # to be distributed in multiple languages.)
    AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # Putting this all together, we can internationalize error responses.
    # We use Alias to redirect any /error/HTTP_<error>.html.var response to
    # our collection of by-error message multi-language collections. We use
    # includes to substitute the appropriate text.
    # You can modify the messages' appearance without changing any of the
    # default HTTP_<error>.html.var files by adding the line:
    # Alias /error/include/ "/your/include/path/"
    # which allows you to create your own set of files by starting with the
    # /opt/IBMIHS/error/include/ files and copying them to /your/include/path/,
    # even on a per-VirtualHost basis. The default include files will display
    # your Apache version number and your ServerAdmin email address regardless
    # of the setting of ServerSignature.
    # The internationalized error documents require mod_alias, mod_include
    # and mod_negotiation. To activate them, uncomment the following 30 lines.
    # Alias /error/ "/opt/IBMIHS/error/"
    # <Directory "/opt/IBMIHS/error">
    # AllowOverride None
    # Options IncludesNoExec
    # AddOutputFilter Includes html
    # AddHandler type-map var
    # Order allow,deny
    # Allow from all
    # LanguagePriority en de es fr it nl sv
    # ForceLanguagePriority Prefer Fallback
    # </Directory>
    # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
    # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
    # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
    # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
    # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
    # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
    # ErrorDocument 410 /error/HTTP_GONE.html.var
    # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
    # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
    # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
    # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
    # ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
    # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
    # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
    # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
    # The following directives modify normal HTTP response behavior to
    # handle known problems with browser implementations.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    # The following directive disables redirects on non-GET requests for
    # a directory that does not include the trailing slash. This fixes a
    # problem with Microsoft WebFolders which does not appropriately handle
    # redirects for folders with DAV methods.
    # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
    BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
    BrowserMatch "^WebDrive" redirect-carefully
    BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
    BrowserMatch "^gnome-vfs" redirect-carefully
    # Allow server status reports generated by mod_status,
    # with the URL of http://servername/server-status
    # Change the ".example.com" to match your domain to enable.
    #<Location /server-status>
    # SetHandler server-status
    # Order deny,allow
    # Deny from all
    # Allow from .example.com
    #</Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".example.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .example.com
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    #Enable the forward proxy server. Note: Do not use the ProxyRequests directive if
    #all you require is reverse proxy.
    #ProxyRequests On
    #<Proxy *>
    # Order deny,allow
    # Deny from all
    # Allow from .example.com
    #</Proxy>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    #ProxyVia On
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at
    # <URL:http://httpd.apache.org/docs-2.0/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # Use name-based virtual hosting.
    #NameVirtualHost *
    NameVirtualHost 83.231.147.65:80
    <VirtualHost 83.231.147.65:80>
    ServerName eus0000168
    DocumentRoot "/www/a/global/nissan-europe"
    RewriteEngine on
    RewriteLogLevel 0
    RewriteOptions inherit
    #--RAM----
    LoadModule weblogic_module modules/mod_wl_20.so
    Debug ALL
    WLLogFile "/logs/apache2/wllog.log"
    StatPath true
    DebugConfigInfo On
    KeepAliveEnabled ON
    <IfModule mod_weblogic.c>
    WebLogicHost 83.231.147.129
    #WebLogicHost eus0000160
    #WebLogicCluster eus0000160.eu.verio.net:27110,eus0000160.eu.verio.net:27001
    WebLogicPort 27110
    </IfModule>
    DynamicServerList OFF
         <Location /AppConsole>
         SetHandler weblogic-handler
         </Location>
    <Location /console>
    SetHandler weblogic-handler
    </Location>
    <Location /HTTPClnt>
    SetHandler weblogic-handler
    </Location>
    <Location /iiop>
    SetHandler weblogic-handler
    </Location>
    #------RAM------
    Alias /data "/www/a/data"
    Alias /at "/www/a/at"
    Alias /ch "/www/a/ch"
    Alias /ch_fr "/www/a/ch/ch_FR"
    Alias /ch_de "/www/a/ch/ch_DE"
    Alias /de "/www/a/de"
    Alias /es "/www/a/es"
    Alias /fr "/www/a/fr"
    Alias /it "/www/a/it"
    Alias /nl "/www/a/nl"
    Alias /se "/www/a/se"
    Alias /tr "/www/a/tr"
    Alias /uk "/www/a/uk"
    Alias /cz "/www/a/cz"
    Alias /hu "/www/a/hu"
    Alias /sk "/www/a/sk"
    Alias /global "/www/a/global"
    Alias /dk "/www/a/dk"
    Alias /fi "/www/a/fi"
    Alias /no "/www/a/no"
    Alias /pl "/www/a/pl"
    Alias /pt "/www/a/pt"
    ErrorDocument 404 /error404.html
    ErrorDocument 500 /error.html
    </VirtualHost>
    Include conf/virtual-hosts/
    CoreDumpDirectory /logs/apache2
    LoadModule was_ap20_module /opt/IBM/WebSphere/Plugins/bin/mod_was_ap20_http.so
    WebSpherePluginConfig /opt/IBM/WebSphere/Plugins/config/webserver1/plugin-cfg.xml
    LoadModule weblogic_module modules/mod_wl_20.so
    Debug ALL
    WLLogFile "/logs/apache2/wllog.log"
    StatPath true
    DebugConfigInfo ON
    KeepAliveEnabled ON
    <IfModule mod_weblogic.c>
    WebLogicHost 83.231.147.129
    WebLogicPort 27110
    </IfModule>
    CoreDumpDirectory /logs/apache2
    D

  • Writing a plugin for Weblogic

    Hi,
    Is it possible to add a mechanism to Weblogic which would intercept
    EJB lookups and requests (on a per bean and per method basis), and
    perform custom access control logic? This mechanism should be seamless
    and transparent to client code so that existing apps would not have to
    be modified. In effect, I would like to create a plugin for Weblogic
    in much the same way as you can create a plugin for web servers like
    Apache, IIS, etc.
    Alternatively, if this effect could be achieved simply through
    configuration changes, then even better. Customized security realms do
    not exactly fit what I want to do because they have to be manually
    created per client, and I would also like to perform additional logic
    besides access control.
    Thanks in advance,
    Steve Au

    Wouldn't EJB clients have to be rewritten to access this proxy bean instead? What
    would prevent clients from accessing the "secured" EJBs directly?
    Thanks.
    "Michael Girdley" <----> wrote:
    We do not offer such an interface natively to write your own security
    interceptors. But, I can imagine someone writing a session bean proxy
    that
    intercept all EJB calls in this way before forwarding them along.
    We plan to offer such functionality in a future release without requiring
    any kludges.
    Michael Girdley
    BEA Systems
    Learning WebLogic? http://learnweblogic.com
    Buy the only book covering J2EE & WebLogic 6:
    http://www.amazon.com/exec/obidos/ASIN/0130911119/learnweblogic/103-9227026-
    4636613
    "Steve Au" <[email protected]> wrote in message
    news:[email protected]..
    Hi,
    Is it possible to add a mechanism to Weblogic which would intercept
    EJB lookups and requests (on a per bean and per method basis), and
    perform custom access control logic? This mechanism should be seamless
    and transparent to client code so that existing apps would not haveto
    be modified. In effect, I would like to create a plugin for Weblogic
    in much the same way as you can create a plugin for web servers like
    Apache, IIS, etc.
    Alternatively, if this effect could be achieved simply through
    configuration changes, then even better. Customized security realmsdo
    not exactly fit what I want to do because they have to be manually
    created per client, and I would also like to perform additional logic
    besides access control.
    Thanks in advance,
    Steve Au

Maybe you are looking for