Cache Engine and Websense and Radius

We have a 560 CE, we are doing Radius Athenication, and Websense content filtering. When looking at the websense reports we do not see the user id only the IP address.
Does anyone have any experience with CE/Radius and Websense ... does the CE version 4.x pass the user id to websense.

Hi,
In 4.2.x code there is an "IP Spoofing" new feature that preserves the clients ip address.
The CLI command is "wccp spoof-client-ip enable"
Regards
Pete Knoops
Cisco Systems

Similar Messages

  • Problems with transaction-logs on cache engines

    Good Day All,
    I have a Cache Engine 550 here and the transaction log working.log file got quite large.
    I was not able to export it to my ftp server so I logged into the Cache engine via ftp and downloaded the file to a PC.
    I then deleted the working.log file on the Cache Engine and rebooted the cache engine.
    The working.log file was not re-created as I had hoped it might be.
    I have created a file called working.log in the correct directory. This file does not seem to get updated though so this must not be right either.
    Any suggestions?
    regards,
    amanda

    Hi Zach,
    Thank you so much for writing back. I am running an archaic version of the software... i can check tomorrow. As to the logging.... i had not enabled transaction-logging in itself so it was a silly config error ...
    :) amanda

  • Question about connection between cache engine and cat6k

    Dear sir,
    Here is the problem description, please give me some help, thank you so much:
    catalyst 6509 is enable for wccp v2.CE 7320 also enable the wccp v2.Wccp service 91 is configured on 6509.Service-munber 91 and port-list 1(with port number 8080) are also configured on CE 7320.Wccp communicates well about service number 91.
    but browsing web page with port number 8080 gets always failed.
    1.6509 wccp configuration:
    ip wccp web-cache redirect-list 30
    ip wccp 91
    interface Vlan10
    ip address 211.162.224.2 255.255.255.240
    ip wccp web-cache redirect out
    ip wccp 91 redirect out
    2.ce7320 wccp configuration:
    wccp router-list 1 211.161.1.49
    wccp port-list 1 8080
    wccp web-cache router-list-num 1
    wccp service-number 91 router-list-num 1 port-list-num 1 application cache
    wccp version 2
    3.show info. from 6509 and ce 7320:
    gwbn7320#sh wccp content-engines
    Content Engine List for Service: Web Cache
    IP address = 211.161.1.50
    Routers seeing this Content Engine(1)
    211.162.224.2
    Content Engine List for Service: WCCPv2 Service 91
    IP address = 211.161.1.50
    Routers seeing this Content Engine(1)
    211.162.224.2
    gwbn7320#sh statistics http savings
    Statistics - Savings
    Requests Bytes
    Total: 90685 460066803
    Hits: 936 162710
    Miss: 89749 459904093
    Savings: 1.0 % 0.0 %
    6509-left#sh ip wccp
    Global WCCP information:
    Router information:
    Router Identifier: 211.162.224.2
    Protocol Version: 2.0
    Service Identifier: web-cache
    Number of Cache Engines: 1
    Number of routers: 1
    Total Packets Redirected: 2525
    Redirect access-list: 30
    Total Packets Denied Redirect: 0
    Total Packets Unassigned: 146
    Group access-list: -none-
    Total Messages Denied to Group: 0
    Total Authentication failures: 0
    Service Identifier: 91
    Number of Cache Engines: 1
    Number of routers: 1
    Total Packets Redirected: 0
    Redirect access-list: -none-
    Total Packets Denied Redirect: 0
    Total Packets Unassigned: 0
    Group access-list: -none-
    Total Messages Denied to Group: 0
    Total Authentication failures: 0
    Regards,
    Sha

    Gilles,
    Thank you!
    Here is the result:
    6509-left#sh ip wccp 91 detail
    WCCP Cache-Engine information:
    IP Address: 211.161.1.50
    Protocol Version: 2.0
    State: Usable
    Redirection: GRE
    Initial Hash Info: 00000000000000000000000000000000
    00000000000000000000000000000000
    Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
    FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
    Hash Allotment: 256 (100.00%)
    Packets Redirected: 180
    Connect Time: 00:07:06
    Regards,
    Sha

  • Cache engine http transparent proxy and caching

    Hi..
    My customer some GPRS user in which they couldn't control proxy setting of the web browser.
    Is it possible to configure on a cache engine such that when these users access the Internet, they will be intercepted by the cache engine. THe cache engine then forwards the request to a proxy server and out to the Internet ?
    Rgds
    Eng Wee

    It is possible to configure the cache engine to provide access to the users. The following URL shows an example on how to configure the Cisco Cache Engine for transparent caching using the Web Cache Coordination Protocol (WCCP).
    http://www.cisco.com/warp/public/117/cache_engine/transparentconfig.html
    This scenario is pretty similar to your requirement. Hope this helps.

  • Cach Engine ACNS 5.4 & Embedded WebSense S/W ver 5.2.2

    Dear All,
    I have some design questions that related to CE-7326 with ACNS 5.4 and its embedded Websense s/w ver 5.2 the questions are:
    1) is it possible for the embedded websense s/w to block any TCP user traffic? if yes, does it use the TCP RST flag technique? how the CE sends this TCP RST flag?
    2)if it is possible to block any TCP sessions, how can I let all users' traffic to be redirected to the CE-7326? is there any other way to redirect the users traffic other than the URL redirection? what is that way?
    3) if for example it is possible to redirect the traffic using switch SPAN session (switch mirror port), do I need configure two NICs on the CE-7326 one for the monitor session and the other for sending the TCP RST signal?
    4) is it possible to use the Web caching features (WCCP) in conjunction with the blocking feature? in this case how the traffic will be redirected using WCCP or using a SPAN session, is there any conflict between the two methods or both are totally apart from each others?
    5) is it possible for the embedded Websense to filter (all TCP sessions, not only the redirected HTTP, HTTPS or FTP) the users by their usernames rather than the users IP address?
    6) now I purchased a Websense Enterprise 36 mo Subscription 1001 to 2500 Users license (SF-WEB36-1K-2500), what is the purpose of this license, do I need it to activate the embedded websense on the CE7326 device? Is it possible to use it to install all the websense modules on an external machine other that the CE7326?
    Thanks and best regards

    Hi,
    I've done a few deployments liks this so here is my personal take on your questions.
    1) No, to my knowledge the CE can only deal with the proxy services defined, however the network agent, an element of websense can deal with other TCP protocols. You have to realise that with the CE and websense its more about the capabilities of websense.
    2) See answer 1 and read in the websense deployment guide on the network agents for an idea on deployment, is available from websenses website for a free download.
    3) No, Websense either runs as server on the CE or redirects to an external server, you need to decide on your deployment model.
    4) Yes, you can use Websense/CE with either transparent (WCCP) or non-transparent dependin g on the edge CPE/
    5) Websense supports policies via the manager for IP address or username from ADS/LDAP, be aware that the login for the proxies if using LDAP/ADS does not support single sign on, for transparent identification I'd recommend using IP addresses via WCCP.
    6) You need to setup the Websense server environment, there are sizing guides on Websenses website for the reporting, manager and server. You need the license key to download the URL list on the server (either on the CE or via an external Server).
    I should point out this internal server function is referred to as on box and the external server is referred to as off box.
    For what its worth I would deploy as off box as Cisco have announced their plans to remove support for URL filtering in the CE and it will be easier for you to support off box in the future.
    Feel free to post here if you'd like a 1-2-1 discussion via email as having done the Websense course and playing with the CE its a bit of mind field. I have to say that Websense direct are very good at support but they may want you to do the Websense training as the product is more complex to deploy than say Smartfilter.
    Kind regards
    Mark

  • My default search engine is Google and I deleted Bing. Whenever I open a new tab, Bing is displayed and it takes the focus so if I am trying to type a URL in the new tab, it is entered in the damn bing search box. HOW DO I GET RID OF THAT ACCURSED BING?

    My default search engine is Google and I deleted Bing from the Search Providers. Facebook is set as my home page. Whenever I open a new tab, a Bing search box is displayed on the page and it takes the focus so when I am trying to type a URL in the new tab, it is entered in the damn bing search box. HOW DO I GET RID OF THAT ACCURSED BING

    Swarnava, thank you very much! that did it and I am Bing-less . . . OH HAPPY DAY!! WOOHOO!!!! thank you, thank you, thank you!

  • Is there a relation between the Engineering Change Management and MM

    Hi SAP MM Gurus,
    Is there a relation between Engineering Change Management and Materials Management? I know we get the versions changes updated in Material Master. But do not know where is the origin for ECM. Step by step configuration is appreciable.
    Thanking in Advance.
    with regards
    Ravi Babu

    Hi ,
    I have created an application and have created end users also who will be using this application. For each of these users i have to give access to application in such a way that they will be able to see only their area a work. So how do i do this ..this needs to done based on the login user_name..my question now is how or from where will i get the current session details like user_name, current session id ,current session date and time?
    Thanks in advance,
    Bhargavi

  • I keep getting a message saying my protection engine has corrupted and that i should try re-installing live update. What is live update and how do i run it? - be grateful for any help

    Hi,
    I turn my i mac on and when it has loaded onto the home screen I get a message popping up saying my protection engine has corrupted and that i should try reinstalling live update and my computer will no longer be protected until I do so. Would anyone be able to tell me what live update is and how I would run/reinstall it? - be grateful for any help!!!
    Thankyou

    It would be a great idea to uninstall Norton - you don't need it and it has a pretty poor reputation for mucking up otherwise healthy Macs.
    Have a look at this User Tip from klaus1: https://discussions.apple.com/docs/DOC-2435
    To uninstall Norton:
    https://support.norton.com/sp/en/us/home/current/solutions/kb20080427024142EN_En dUserProfile_en_us
    Edit: To see whether you actually have Norton installed launch Activity Monitor in the Utilities folder. If it's installed you'll likely see some Norton entries there.
    Also, in System Preferences>Users & Groups or Accounts, depending on OS)>Login Items, it might be listed.

  • In safari, On my Ipad2,I get the error message, "too may redirects" and the page won't load. Anyone with advice? I have cleared the cache, cookies, and history and restarted.

    In safari, on my Ipad2, I get the error message " too many redirects" and the page won't load. I have cleared the cache, cookies, and history and have rebooted and I still get the same problem. Any advice?

    In safari, on my Ipad2, I get the error message " too many redirects" and the page won't load. I have cleared the cache, cookies, and history and have rebooted and I still get the same problem. Any advice?

  • J2EE engine shuts down and restarts....

    Hi,
    I am doing a scenrio using BPM with multiple parallel process. I am using a inbound file adapter for the incoming message to feed the BPM process. I have set 500 messages/per recordset.The process is stable when the message size is small but when the message size increases may be to 2MB,the J2EE engine collapses and restarts a certain period of time.
    When I look at the incoming messages they seem to have failed at the BPM process. I am not sure what is causing the J2EE engine to collapse and restart...It works fine with less than 1MB incoming messages....Does it mean XI cannot support messages greater than 1MB? I know its absurd but this is very interesting..Checking the SMICM, I find the processes are all normal...
    -Teresa

    Hi :
    Did u checked  up the  java heap parameters in the configtool set for the server
    Raise the heap parameters as per the following steps
    1) Open up the configtool and increase the heap size and memory size for the server
    Cluster Data -> instance_IDXXX ->  ServerIDXXXX
    Max heap Size 2048MB
    Java Parameters
    -Djava.security.policy=./java.policy
    -Djava.security.egd=file:/dev/urandom
    -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -Xdebug
    -Xms1280m
    -Xmx3072m
    -XX:MaxPermSize=192m
    -XX:NewSize=160m
    -XX:MaxNewSize=160m
    -XX:NewRatio=3
    -XX:+DisableExplicitGC
    -verbose:gc
    -XX:+PrintCompilation
    -XX:SurvivorRatio=2
    -XX:TargetSurvivorRatio=90
    -XX:PermSize=192m
    -XX:+UseParNewGC
    -XX:+PrintGCTimeStamps
    -XX:SoftRefLRUPolicyMSPerMB=1
    -Djava.awt.headless=true
    2) Restart the server using Visual Administrator
    3) open up the configtool again to ensure that the settings you have set in the config tool are available
    4) Now check whether the problem occurs again or not
    regards & cheers
    karthik

  • IE Caching Issue while closing and opening a UI thrice or more

    Hi Everybody..
    Greetings of the day..
    I am working on a web application (Can not disclose the name) where at certain level a word document generated contains a customized toolbar.
    It contains one print option, when clicked opens a UI which shows default printer available (Its different from our normal printing).
    When I repeat opening and then closing of this UI thrice or more times, the entire application gets hanged and I have
    to terminate it by killing the associated process from task manager.
    When this issue was analysed our by onsite team they arrived at a conclusion saying that its an IE caching issue.
    But upto my knowledge I know that any application which is .SSL secured, by default IE never does cache control.
    What could be the solution if application is not .SSL secured or if it is.
    Kindly help asap.
    Thanks.

    Hi all
    Did anyone ever manage to fix this? I'm having this issue across multiple iPads. Even if i completely reset the iPad (erasing all content and settings) it does it again when restored.
    I've just got an iPad Air and that does it too. I even created a new Apple ID to see if that would work (trying to avoid any kind of caching aross iCloud, etc) and it does it straight away in those books. It's massivley frsustrating.
    I have noticed it only seems to do it for iBooks formatted books, not ePubs.
    Anyone have a resolution - it's quite embarrassing when you're doing a presentation about book features and the audience assumes youve only the wrong book each time. More annoying when clsoing the book and the wrong cover appears again, but also takes you to that books collection page, rather than the one you were in.

  • Reports Background Engine caused error and had to be closed

    "Reports Background Engine caused error and had to be closed"
    we are encountering this error when trying to run any report on some machines.with windows 2000.
    we tried to login (on the machines having problems) using another windows user,
    sometimes it works and sometimes not.
    we also tried to reinstall the reports runtime and it never worked.
    we have developer 6i, Oracle database 10g express edition.
    Does anyone have a solution to this random problem ?
    Thanks

    dear all
    you can pass parameter from form to report to close report server after close report
    add_parameter(pl_id, 'oracle_shutdown',text_parameter, 'Yes');
    then it will be ok
    good luck
    Message was edited by:
    nim
    Message was edited by:
    nim

  • Videos have stopped playing on all sites, just get black screen. Clearing cache and cookies and restart in safe mode does not fix.

    Clearing cache and cookies and restart in safe mode does not fix.

    Hi castaway, you are using a old version of firefox . Please update it . goto '''Help->About Firefox''' and it will be automatically updated.

  • Can the folder C:\Windows\Cache\Adobe Reader 6 and the files it contains simpley be deleted?

    My daughter is running Adobe Reader 9.4.5 and Adobe Flash Player 10 Active X
    on a Dell Dimension 4400 system with
    Windows XP Home Edition version 2002 Service Pack 3.
    During a full system backup using Seagate DiskWizard version 11.0.8326
    each time folder C:\Windows\Cache\Adobe Reader 6
    is accessed the pc freezes with the Blue Screen error
    IRQL NOT LESS OR EQUAL ERROR 0x0000000A
    (0x00000166, 0x00000002, 0x00000000, 0x804E5443).
    Each time the Adobe Reader 6 folder is opened manually, the system presents a spinning
    CD icon superimposed on the cursor and attempts to access the CD drive.
    The access ultimately fails since there is no CD loaded because there is no intent to install
    anything at the moment.
    Through a manual process of backing up each of the the files in the Adobe Reader 6 folder
    individually, one at a time, I strongly suspect the problem file to be instmsiw.exe.
    Can the folder C:\Windows\Cache\Adobe Reader 6 and the files it contains simpley be deleted? 
    Are there any registry entries or issues that must be addressed before deleting these files?
    What is the best way to free up space on the C drive that is apparently being occupied by
    files left over from the install of a prior version of Adobe Reader?
    The folder C:\Windows\Cache\Adobe Reader 6 contains the following files:
    0x0409.ini                        5KB          Configuration Settings        2/18/2003
    abcpy.ini                          2KB          Configuration Settings        3/24/2003
    Adobe Reader 6.0.msi      2198KB     Windows Installer               5/19/2003
    Data1.cab                       23334KB    WinZip file                         5/19/2003
    instmsia.exe                   1669KB      Application                        3/11/2002
    instmsiw.exe                  1780KB      Application                        3/11/2002
    Rdr60ENU.itw                 16KB          ITW file                            5/11/2003
    Rdr60ENU.mst               4KB            MST file                           4/16/2003
    Setup.exe                      212KB        Application                        5/19/2003
    Setup.ini                        2KB            Configuration Settings        5/19/2003
    Thank you for any assistance you can provide.

    Go to Add/Remove Programs in Control Panel and uninstall Adobe Reader 6. That version poses a security risk to your system and should be removed a.s.a.p.
    After you remove it, reboot and then delete the "Adobe Reader 6" folder at the location you mentioned above.
    Then go to http://get.adobe.com/reader/direct/ and download version 9.4
    After that installs, download the latest patch for it by opening the program, then go to Help | Check For Updates.
    As a precaution, download the free version of Malwarebytes from here: http://www.malwarebytes.org/products/malwarebytes_free and then run a full system scan.

  • I accidentally downloaded the search engine called Genieo and I am trying to remove it but it just wont go away! I followed the step to remove it but its not working. I am begging for someone's help!!

    I accidentally downloaded the search engine called Genieo and I am trying to remove it but it just wont go away! I followed the step to remove it but its not working. I am begging for someone's help!!

    See if these instructions work:
    http://www.thesafemac.com/arg-genieo/
    Ciao.

Maybe you are looking for

  • OracleXE + XMLDB + WebDAV + Vista: How?

    I'm looking at XMLDB on OracleXE on a Windows Vista (Home Premium SP1) machine. I've got XMLDB working via the HR schema, with an XML view of the EMP table, and I can view data extracted from the XML view via a virtual folder in my browser at: http:/

  • External floppy disk drive

    I have an HP F1059C External Floppy Disk Drive by TEAC that came with a (really) old HP laptop. I have some old research saved to floppy disks I need to access.  Is there a cable that will convert my External drive to a USP port on my present  HP lap

  • Every apps crashed, i can't use for a minute because every apps down, include The contacts

    Todas las aplicaciones se me cierran. Incluido la agenda de contactos. Este inconveniente lo tengo con el iPhone 4S. Intente haciendo una restauración con el iTunes pero me da el mismo error. Con el iPad 2 funciona de manera impecable.

  • Production Order Header - Committed Quantity

    Hi Team, I have created the production order with quantity 2. In order to produce the 2 header item, i need to 2 components (BOM item). But currently i have only 1 quantity of  BOM item in stock. With this condition, i am performing the ATP check in

  • Drop Down Menu / List Not Working + Actual Window Manager Fix

    This answer wasn't easy to find and once I did find it there wasn't a fix other then to turn off Actual Window Manager. I found the fix if you want to continue using Actual Window Manager: # Open Up Settings in Actual Window Manager # Select: Window