Cache/Queue Problem while executing scenario

Hi All,
Our server is up and running, but there is a problem every time we try to execute a scenario:
1. The SXI cache and the CPA cache have to be refreshed after making any changes to the objects
2. The queues have to be de-registered, then re-registered in sxmb_adm
Has anyone faced this problem before? Any suggestions as to how to solve this?
Regards,
Puloma.

Hi,
this is not a normal behaviour. Have a look at the cache notifications in the integration directory and check whether you receive some hint. Eventually there might be problems with the connectivity to the adapter engine or user xidiruser. Have a look at the following notes
741214 and 780747 and the HOw To Cache guide which you can find under http://service.sap.com/xi
Hope this helps, Regards, Jaime

Similar Messages

Problem While Executing T.CODE DP90

Hi,
We have Upgrade our system from 4.6C to ECC6.
We are facing following problem while executing Resource Related Billing request
Through Transaction code DP90.
Process.
1.     We are creating Sales Order and system will create Service order automatically as per the configuration.
2.     In service order we have External as well internal operations ,
Internal operations will be confirmed through IW41, and External Operations we are creating Purchase Requisition then creating PO and MIRO,
After all Operations confirmed we will make Service order status as technically completed, then we are executing DP90 for Resource Related Billing, System will determine the material, combination of Cost element and Activity Type (Which is configured in T.Code ODP1) For External Operations System is Considering Activity Type for material determination in 4.6c but it is not considering Activity Type for Material Determination in ECC6 for External Operations.
   Please Help me,
Edited by: D B on Apr 29, 2008 6:13 PM

Hi Prashanth,
      Thanks for your reply, but all activity are valid in current period, in our Scenario in the old system for External Operations with combination of Activity type and Cost element system is determining material but where as in the new system for external operations it is not considering the Activity type and system is determining the material in the combination of   Cost element and Blank activity type so, we are getting different material in DP90.

Re: [iPlanet-JATO] Experiencing problem while executing model.

Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]

Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]

Facing Problem while executing a command through WLST

Hi,
Iam using Weblogic 11g(10.3.2).Whenever I execute the below command in WLST on windows it is working fine.
reassociateSecurityStore(domain="base_domain",admin="cn=orcladmin",password="welcome1",ldapurl="ldap://<hostname>:389",servertype="OID",jpsroot="cn=jpsroot_idm_idmhost1")
But whenever i execute the same in Linux,it is throwing the error as below:
wls:/base_domain/serverConfig> reassociateSecurityStore(domain="base_domain",admin="cn=orcladmin",password="welcome1",ldapurl="ldap://<hoistname>:389",servertype="OID",jpsroot="cn=jpsroot_idm_idm1")
Traceback (innermost last):
File "<console>", line 1, in ?
NameError: reassociateSecurityStore
Please suggest....
Regards
Pavan

Facing Problem while executing a command through WLST

Problem while executing the transaction code FMBV (Reconstruct)

We are facing a problem while executing the transaction code FMBV
(Reconstruct Availability Control in Funds Management) in it when we
execute this transaction system only updates the expenditure which is
made before technical upgrade from 4.6c to ECC6 EHP6, against the
Assigned Budget (KBFC budget type) in the Annual Budget Table (BPJA)
and
the expenditure which we made after the upgrade, the program just
ignore
it. We can also see the expenditure in the standard FBL3N report.
Please guide us.
Thanks and Best Regards,

Dear Abrar
In your description, you refer to missing update after an upgrade. First of all, see if table FMIT is consistent, as it is the basis for calculating the assigned values during AVC reconstruction.
Refer to this note:
977016 FMIT: Missing totals records in Funds Management And perform following steps:
1.- Run program RGZZGLUX
2.- Run program RFFMRC04 to match totals table with line items. A test run after a successful effective run should not find inconsistencies.
3.- If RFFMRC04 does not show more inconsistencies, run FMBV as final step.
Note that this reconstruction must be done without any other budgeting/posting activities at the same time, otherwise you may cause other inconsistencies.
Please let me know the results.
Best regards,
977016 - FMIT: Missing totals records in Funds Management
Symptom
After the upgrade to ERP 2004 or higher you realize that the FMIT totals table is no longer updated in Funds Management. You start the RFFMRC04 report to reconstruct the totals, but the report still displays the missing totals after an update run.
Other Terms
FMIT, EA-PS, ECC 5.00, ECC 6.00, ECC 7.00
Reason and Prerequisites
This problem occurs due to a generation error.
Solution
Start the RGZZGLUX report to generate missing source code in FI-SL. Then start the RFFMRC04 report to reconstruct the totals, now another run of the report should no longer display any errors.

Facing a small problem while executing WDA application from portal

Hi Experts,
I developed web dynpro for ABAP application and placed table UI control, which contains 270 records. Executing from SE80, it is working fine and showing clearly all records.
This application integrated in portal, while executing this applicaiton from portal, it is working fine and showing all records.
Here I facing a small problem i.e Pager ( footer area ) of table.
When the table is displayed there are the small box in the below of the table showing ROWS 244 of 270.
244 will be available in a small box. this 244 is not showing clearly, while executing from portal ( last digit 4 displying half part only). but 244 showing clearly while executing from SE80.
Kindly suggest how to resolve this problem.
Thanks & Regards
Sridhar

Hi Gopi Krishna,
Thanks for your time. From SE80, it is working fine and showing clearly row number. There is no property for increase width of small box, which contains current row number).
Facing problem while executing from portal.
Thanks & Regards
Sridhar

BI 7.0 Problem while executing query on Infoset containing Infocubes

Hi All,
While executing quey on infoset containing infocubes we are getting following error message.
EError while reading data; navigation is possible
EError reading the data of InfoProvider A2PPI103
EError when generating the SQL statement
E[IBM][CLI Driver][DB2] DSNT408I SQLCODE = -204, ER ROR: SAPR3.T00001 IS
I>> Row: 11 Inc: RAISE_READ_ERROR Prog: CL_RSDRV_VPROV_BASE
any idea what could be the reason ?

Hi All,
it's very interesting the question of HariPrasad because from yesterday i have the same problem in a similar environment:
@5C\QError@     Error reading the data of InfoProvider ZC1ITS02
@5C\QError@     Error when generating the SQL statement
@5C\QError@     [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -204, ERROR: SAPBWD.T00002 IS AN UNDEFINED NAME DSNT41 8I SQLSTATE   = 42704 SQLSTA
May the SQL generator does'nt work well whit cube and DB2 ??
If i execute the Infoset with the debbugging option i can see the SQL code:
...........FROM "/BIC/PZC1CPROD0" "T00001",
"T00002"
WHERE................
the first table is an infoobject, the second one is the "missing" cube...............
Hari, did you solve the problem in the meantime ??
Thank's to all, Ray.

Problem while executing the web template.

Hi Experts,
       I have created a web template and while executing it, I received the following error message in the BEx Launcher.
ERROR MESSAGE:
" Exception in BI runtime
Log ID: 0002B3510136CE0500000101000001FC00044748C57DB3F0
Initial cause
Message:
Concurrent call. Connection currently used in another thread.
Stack trace:
com.sap.mw.jco.JCO$Exception: (132) JCO_ERROR_CONCURRENT_CALL: Concurrent call. Connection currently used in another thread.
     at com.sap.mw.jco.JCO$Client.execute(JCO.java:3923)
     at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
     at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20471)
     at com.sap.mw.jco.JCO$Repository.queryFunctionInterface(JCO.java:20810)
Message:
JCo exception thrown when connecting to system "DB7CLNT800"
Stack trace:
com.sap.ip.bi.base.exception.BIBaseRuntimeException: JCo exception thrown when connecting to system "DB7CLNT800"
     at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Proxy.createFunction(Jco640Proxy.java:88)
     at com.sap.ip.bi.base.application.service.impl.application.ApplicationSettingsService.initializeProperties(ApplicationSettingsService.java:130)
     at com.sap.ip.bi.base.application.service.impl.application.ApplicationSettingsService.initialization(ApplicationSettingsService.java:124).........       "
      Pls help me to solve this problem.
With Regards,
Yokesh Kumar.

There has been quite some patches lately for the java runtime. Please check if you're up to date.
Cheers,
Ron

Problem while executing the package

Hi Guys,
I am getting the problem while executin the package for 1 of the interface named PRE_SYNC_EX_ARMY_VEH_DEL.
The source tables are EX_ARMY_VEH_TMP and CONTROL_DEL & target table is CONTROL_DEL
All the three tables are in the same schema named RTO_STAGE.
I am looking in the operator as at the first session is in the process(running mode) with "DROP FLOW TABLE" as the message while all other sessions are in the waiting mode related to that interface PRE_SYNC_EX_ARMY_VEH_DEL.The previous interface before it ie PRE_SYNC_AXLE_DEL & PRE_SYNC_AXLE_DELNR is running okk(with all succesful session).
**In one statement I can summerize that execution of package is halting/stopped at one interface & not showing error in operator(showing running)**
what would be the problem?
Thanx
Edited by: user8849294 on Mar 1, 2010 10:17 PM
Edited by: user8849294 on Mar 2, 2010 9:36 PM
Edited by: user8849294 on Mar 2, 2010 9:43 PM

Hi,
You didn't mention the exact error.
Did you check if your interface succeeds outside the Package?
If yes, have you included any odiFileWait event which's why other tasks are kept in Wait mode?
In any case, if there's an error, the task with the red-colored icon shows the one with problem. Double-click it & go to the Execution tab to get the exact error

Problem while executing simple java program

Hi
while trying to execute a simple java program,i am getting the following exception...
please help me in this
java program :import java.util.*;
import java.util.logging.*;
public class Jump implements Runnable{
 Hashtable activeQueues = new Hashtable();
 String dbURL, dbuser, dbpasswd, loggerDir;
 int idleSleep;
 static Logger logger = Logger.getAnonymousLogger();
 Thread myThread = null;
 JumpQueueManager manager = null;
 private final static String VERSION = "2.92";
 public Jump(String jdbcURL, String user, String pwd, int idleSleep, String logDir) {
 dbURL = jdbcURL;
 dbuser = user;
 dbpasswd = pwd;
 this.idleSleep = idleSleep;
 manager = new JumpQueueManager(dbURL, dbuser, dbpasswd);
 loggerDir = logDir;
 //preparing logger
 prepareLogger();
 private void prepareLogger(){
 Handler hndl = new pl.com.sony.utils.SimpleLoggerHandler();
 try{
 String logFilePattern = loggerDir + java.io.File.separator + "jumplog%g.log";
 Handler filehndl = new java.util.logging.FileHandler(logFilePattern, JumpConstants.MAX_LOG_SIZE, JumpConstants.MAX_LOG_FILE_NUM);
 filehndl.setEncoding("UTF-8");
 filehndl.setLevel(Level.INFO);
 logger.addHandler(filehndl);
 catch(Exception e){
 logger.setLevel(Level.ALL);
 logger.setUseParentHandlers(false);
 logger.addHandler(hndl);
 logger.setLevel(Level.FINE);
 logger.info("LOGGING FACILITY IS READY !");
 private void processTask(QueueTask task){
 JumpProcessor proc = JumpProcessorGenerator.getProcessor(task);
 if(proc==null){
 logger.severe("Unknown task type: " + task.getType());
 return;
 proc.setJumpThread(myThread);
 proc.setLogger(logger);
 proc.setJumpRef(this);
 task.setProcStart(new java.util.Date());
 setExecution(task, true);
 new Thread(proc).start();
 private void processQueue(){
 //Endles loop for processing tasks from queue
 QueueTask task = null;
 while(true){
 try{
 //null argument means: take first free, no matters which queue
 do{
 task = manager.getTask(activeQueues);
 if(task!=null)
 processTask(task);
 while(task!=null);
 catch(Exception e){
 logger.severe(e.getMessage());
 logger.fine("-------->Sleeping for " + idleSleep + " minutes...hzzzzzz (Active queues:"+ activeQueues.size()+")");
 try{
 if(!myThread.interrupted())
 myThread.sleep(60*1000*idleSleep);
 catch(InterruptedException e){
 logger.fine("-------->Wakeing up !!!");
 }//while
 public void setMyThread(Thread t){
 myThread = t;
 /** This method is only used to start Jump as a separate thread this is
 *usefull to allow jump to access its own thread to sleep wait and synchronize
 *If you just start ProcessQueue from main method it is not possible to
 *use methods like Thread.sleep becouse object is not owner of current thread.
 public void run() {
 processQueue();
 /** This is just another facade to hide database access from another classes*/
 public void updateOraTaskStatus(QueueTask task, boolean success){
 try{
 manager.updateOraTaskStatus(task, success);
 catch(Exception e){
 logger.severe("Cannot update status of task table for task:" + task.getID() + "\nReason: " + e.getMessage());
 /** This is facade to JumpQueueManager method with same name to hide
 *existance of database and SQLExceptions from processor classes
 *Processor class calls this method to execute stored proc and it doesn't
 *take care about any SQL related issues including exceptions
 public void executeStoredProc(String proc) throws Exception{
 try{
 manager.executeStoredProc(proc);
 catch(Exception e){
 //logger.severe("Cannot execute stored procedure:"+ proc + "\nReason: " + e.getMessage());
 throw e;
 *This method is only to hide QueueManager object from access from JumpProcessors
 *It handles exceptions and datbase connecting/disconnecting and is called from
 *JumpProceesor thread.
 public void updateTaskStatus(int taskID, int status){
 try{
 manager.updateTaskStatus(taskID, status);
 catch(Exception e){
 logger.severe("Cannot update status of task: " + taskID + " to " + status + "\nReason: " + e.getMessage());
 public java.sql.Connection getDBConnection(){
 try{
 return manager.getNewConnection();
 catch(Exception e){
 logger.severe("Cannot acquire new database connection: " + e.getMessage());
 return null;
 protected synchronized void setExecution(QueueTask task, boolean active){
 if(active){
 activeQueues.put(new Integer(task.getQueueNum()), JumpConstants.TH_STAT_BUSY);
 else{
 activeQueues.remove(new Integer(task.getQueueNum()));
 public static void main(String[] args){
 try{
 System.out.println("The length-->"+args.length);
 System.out.println("It's " + new java.util.Date() + " now, have a good time.");
 if(args.length<5){
 System.out.println("More parameters needed:");
 System.out.println("1 - JDBC strign, 2 - DB User, 3 - DB Password, 4 - sleeping time (minutes), 5 - log file dir");
 return;
 Jump jump = new Jump(args[0], args[1], args[2], Integer.parseInt(args[3]), args[4]);
 Thread t1= new Thread(jump);
 jump.setMyThread(t1);
 t1.start();}
 catch(Exception e){
 e.printStackTrace();
} The exception i am getting is
java.lang.NoClassDefFoundError: jdbc:oracle:thin:@localhost:1521:xe
Exception in thread "main" ERROR: JDWP Unable to get JNI 1.2 environment, jvm->GetEnv() return code = -2
JDWP exit error AGENT_ERROR_NO_JNI_ENV(183): [../../../src/share/back/util.c:820] Please help me.....
Thanks in advance.....sathya

I am not willing to wade through the code, but this portion makes me conjecture your using an Oracle connect string instead of a class name.
java.lang.NoClassDefFoundError: jdbc:oracle:thin:@localhost:1521:xe

Problem while executing planning function

Hi All,
I have created an input ready query which takes input for a key figure growth percentage and applies it to another key figure volume to get the new volume. For this calculation I have written a FOX formula:
Initially all the records have growth per as zero. When I enter the value for one DU and transfer it, it is calculating the new volume, but if I enter the per for a new record, it is calculating for this record and also recalculating the volume based on already entered growth percentage for the previous DU. PFB the example:
Scenario 1:
User enters the value for the first time
Season      Brand                 DU                         Growth percentage         Volume               New vol
SS09            ADIDAS        TENNIS                               10%                       100                   110
SS09            ADIDAS         KIDS                                    0%                       500                   500
Now he clicks the u2018TRANSFERu2019 button to which the planning function is assigned for performing the calculation. The volume changes to u2018110u2019.
Scenario 2:
User enters the value for next DU.
Season      Brand                 DU                Growth percentage         Volume     New vol
SS09            ADIDAS        TENNIS                               10%             100             121
SS09            ADIDAS         KIDS                                  10%              500             550
So how can i avoid this problem of recalculating. Also if this data is saved ino the cube and the report is executed for the next time and if it picks up the growth percentages and recalculates again, it will be wrong planning.
Request your inputs as how to solve/avoid this problem.

Hi,
you can use three keyfigure. The percentage value, the original value and the target value.
target value = original value * percetage value / 100.
Hope this helps ...
Regards Matthias Nutt
SAP Consulting Switzerland

MS SQL Server 2005... Problem while executing stored procedure

Hi.. all
I have got a problem with sql server 2005
When i execute any stored procedure on a remote database using
ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_READ_ONLY
options, it throws SQL Exception with following message
"A server cursor cannot be opened on the given statement or statements. Use a default result set or client cursor."
Note: Every thing works fine, if I execute the same sp from the PC where sql server is installed, it throws this exception only when i execute sp from a computer different thn one where SQL server is installed.
Here is d code.
CallableStatement call = conn.prepareCall( "{call getAttributeLabelValues(?,?,?)}",
ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_READ_ONLY
// set parameters.
ResultSet rs = call.executeQuery( ) ;
If I remove options
ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_READ_ONLY
while executin SP, thn every thing works fine.
here is d exception
com.microsoft.sqlserver.jdbc.SQLServerException: A server cursor cannot be opened on the given statement or statements. Use a default result set or client cursor.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.sendExecute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteQuery(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(Unknown Source)
I will appreciate any help.
Sudhir
http://www.jyog.com

use sql server jdbc driver v1.2..........

PLS-00306,problem while executing procedure from oracle e_comerce

Hi
I have writen a procedure in oracle.Tere i have a parameter with type varchar2.
While i registered it in e_comerce i choosed the value set as 15characters.
When i am runing the program from my ecomerce application it gives an error as below:
ORACLE error 6550 in FDPSTP
Cause: FDPSTP failed due to ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'PO_OUTPUT'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
there is no error when i am executing my procedure in toad/sql+ but this error comes only in e_comerce application.
PLease tell what is the reason and what can be the solution?

Hi,

The function has the following parameters: 
function insertj(jnum j.j#%type, jname j.jname%type, city j.city%type) 
where j# is varchar2(5), jname is varchar2(35) and city is varchar2(35) .
I was trying to insert the following values: 
j#:='J11', jname:='JobName' and city:='Paris'. 


The procedure just calls this function with the same parameters. It is very strange because it is hard to see what the problem is. The line 10 is return 0 in the function where I believe the error comes from. It starts in the procedure and then goes in the function body, if I am interpreting this right.


Any idea?

Thanks!

Problem while executing the query

Hi,
I have a query when iam trying to execute the query it is giving following error
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Select a valid Date (OR) Fiscal Period (OR) Calendar Month
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Select a valid Date (OR) Fiscal Period (OR) Calendar Month
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1452)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Proxy.executeFunction(Jco640Proxy.java:267)
Iam not sure why i could not able to execute this query.I could able to execute and run other queries.
Please help me..
thanks in advance

Hi,
Please check if you have used any formulae or function modules to derive the fiscal period/month from calday. Maybe the date being assigned is not of the same format as expected due to which the error (input valid date or calmonth or fiscal period) is being generated.
Regards,
Manoj

Problem while executing unix command having \&\& symbol

Hi All,
Please check the below program while is not executing, when the unix command's having \&\& is used.
The following command copies the src folder to dest folder with out data loss ...
import java.io.*;
import java.util.*;
public class Sample
public static void main(String[] args)
     try {
          String ExCmd     =     "ssh [email protected] cd /u01/11510/devdb/9.2.0/slax \\&\\& /bin/tar cf - . | ssh [email protected] cd /d01/AppsTest/testappl2 \\&\\& /bin/tar -xf - > test.log";
          System.out.println("Command to execute : "+ExCmd);
          Process SshProc = (Runtime.getRuntime()).exec(ExCmd);
        // any error message?
          StreamReader errorStream = new StreamReader(SshProc.getErrorStream(), "DEBUG");
        // any output?
          StreamReader outputStream = new StreamReader(SshProc.getInputStream(), "OUTPUT");
        // kick them off
          errorStream.start();
          outputStream.start();
          int pp =SshProc.waitFor();
          System.out.println("command execution value: "+pp);
     }catch(Exception e) {
          e.printStackTrace();
class StreamReader extends Thread
    InputStream is;
    String type;
    StreamReader(InputStream is, String type)
        this.is = is;
        this.type = type;
    public void run()
        try
            InputStreamReader isr = new InputStreamReader(is);
            BufferedReader br = new BufferedReader(isr);
            String line=null;
            while ( (line = br.readLine()) != null) {
                System.out.println(type + ">" + line);
        } catch (IOException ioe)
            ioe.printStackTrace();
}When this is executed iam getting process value as "0".
But nothing is copying to target ..
So to resolve this i have created a script .. and passed arguments to that script and chaged command as follows :
String ExCmd = "sh /home/juser/movedir.sh [email protected] /u01/11510/devdb/9.2.0/slax /bin/tar [email protected] /d01/AppsTest/testappl2 /bin/tar /home/juser/test";
Then it is executing fine. But in my scenario iam restricted to use scripts.
So plz can any body have a solution for this.
Thanks, SN

Iam unable to execute command with &&, it's executing fine only from \&\& ... Can any body tell me how can we make below code as generic, depending on UNIX Shell environment?
String[] ExCmd     = {"sh", "-c", "ssh [email protected] cd /u01/11510/devdb/9.2.0/slax \\&\\& /bin/tar cf - . | ssh [email protected] cd /d01/AppsTest/testappl2 \\&\\& /bin/tar -xf - > test.log"};
Process SshProc = Runtime.getRuntime().exec(ExCmd);"sh" should be changed here depending on UNIX Environment, because previously i found that in some unix environment's "sh" is not working ..
So can any one help...
Thank in advance.

Cache/Queue Problem while executing scenario

Similar Messages

Maybe you are looking for