Cache refresh error, while activating changelists

Hi all,
I got a problem, concerning XI Runtime Cache on XI 3.0, SP15 -> when I try to activate changelists from Integration Directory, (SOMETIMES!)XI_CACHE shows status: Error, while refreshing cache
with Errortype: Communication,
"if_http_client receive http_communication_failure"
When I then do a delta or full cache refresh from transaction SXI_CACHE it allways works, even after an error occured before. Some ideas, what I could check?
Thank you in advance..
Daniel

Hi,
Just check with Tcode SICF and check for all the services are working fine.
Go thru following links
http://service.sap.com/NW04 ->How-to Guides-> Exchange Infrastructure->How To handle Caches in SAP XI 3.0
Also go thru following thread.
problem with xi cache
Hope this helps.
Regards,
Moorthy
Regards
Suraj
Regards,
Moorthy

Similar Messages

Error while activation of mapping

Hi experts,
i am getting folowing error while activation of the mapping object. Checked the cache and updated it .
there are no locks by any user also
Version management was unable to execute the last action because a temporary internal lock has been set. Repeat the action
please help if you faced similar issue.
Regards,
srinivas

Hi,
Did you have a chance to look at this thread?
Internal lock version management : Unable to copy objects
Regards,
Ravi

Error while activating a routine "no object list"

hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
Nishant

Try running program RV80HGEN.
Regards,
Naiimesh Patel

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Error while activating Transformations

Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.

Hi,
Map it with required Unit filed from your Source .
Mayank

Error while Activating / running Bex queries/reports

Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BI

Goto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi

Error while activating transformation

Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
   Message Number. RSAA561
2. Error while activating transformation
    Message Number. RSTRAN510
3. Error activating transformation.
   Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh Karan

Might be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay

Error while Activating DSO Data

Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
Thanks

Hi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue.

Error while activating DSO

Hi,
I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
"Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem."
Any thoughts how I should correct/

Hi Tanu,
this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
This should correct the issue.
regards,
Naveen.A

Error While activating 0Material(BI7)

Dear Gurus,
I am trying to Activate 0Material Infoobject after deleting a Navigation attribute(Classification characteristics) ,the system throws a error " Error while activating Type Info object".And when i navigated to the Detailed error message it says " error : Internal Activation(info object) - error while converting master data tables .Can anyone help me out with this.
manythanks
arun

Dear gurus,
We posted the error message to SAP and they have replied " while we deleted the attributes from the Info object(0material) it broke the D-Version of the Object and so to Transport the Info object from another Working system to the Problem(Dev)system ,Install and then activate".
1). Does it mean we can install them object in PRODUCTION Server and then transport to the Development.???
2). Now i tried installing 0Material in RSORBCT in Produciton,but gets a message "Cant make any changes in the repository-changes in this client prohibited". Guys could u help us with this??
manythanks
arun

Error while activating Infocube

Following error while activating after creating new Infocube:
No active nametab exists for /BIC/DDPCW14DFD1
Termination due to inconsistencies
Table /BIC/DDPCW14DFD1 (Statements could not be generated)
Enhancement category for table missing
The cube is being made as a exact copy of an existing activated and correctly working cube.
Can anyone shed some light on this?
======================================
MORE detailed error:
RED- Error
GREEN-Fine
YELLOW-Warning
RED     Error/warning in dict. activator, detailed log --> Detail
GREEN     Activate table /BIC/DDPCW14DFD1
YELLO     Enhancement category for table missing
YELLO     Enhancement category for include or subtype missing
GREEN     A table called /BIC/DDPCW14DFD1 exists in the database
RED     No active nametab exists for /BIC/DDPCW14DFD1
RED     Termination due to inconsistencies
RED     Table /BIC/DDPCW14DFD1 (Statements could not be generated)
GREEN     Error number in DD_DECIDE (9)
YELLO     Flag: 'Incorrect enhancement category' could not be updated
GREEN     Table /BIC/DDPCW14DFD1 was not activated
GREEN     Activate table /BIC/DDPCW14DFD2
YELLO     Enhancement category for table missing
YELLO     Enhancement category for include or subtype missing
GREEN     Table /BIC/DDPCW14DFD2 must be created in the database
=============
Thanks,
Mohnish

Can i know in which environment are you working? BW 3.5 OR BI 7?

Error while activating Transformation CO_OM_WBS_3

Hi everybody,
i get the following error message while activating the transformation for CO_OM_WBS_3 in Dev
Error while activating transformation
Message no. RSTRAN510
Error when writing routines
i checked the routine for co_om_wbs_3 the syntex was correct.
i have checked in forum am not getting clear picture please guide me and
sap component version : SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW 7010006 SAPKW70106
BI_CONT 704 0006 SAPK-70406INBICONT
Regards,
Sunder

Dear anand,
thankyou
Regards,
sunder
Edited by: sundersham on Mar 28, 2010 12:34 PM

Error while activating DTP in BI 7.0

I am facing an error while activating DTP between a ODS and CUBE.
I have converted 3.x update rules and transfer rules to 7.x transformation. Enhancements were carried out on the data source as well. All the objects and transformations were activated. While activating the DTP between the ODS and CUBE i get an error message saying:
"Creation of PSA /BIC/B0000XXX failed.
Error during creation of DDIC sources of Data Transfer Process DTP_<Request Number>
Error when activating Data Transfer Process DTP_<Request Number>"
I have come across a OSS note, 954574, which is relavent to SP09. But we have SP17 installed on our server.
Any pointers on the same would be of great help.

Hi Rupesh,
Chk these links they may help you
http://help.sap.com/saphelp_nw70/helpdata/EN/43/fa2f42e8fc6befe10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/44/03a25c0bbe025ce10000000a1553f7/content.htm
Regards,
RK

Error while activating transformation in BI 7.0

HI,
Error: Error while activating transformation.
Does anyone know how to solve this.
Sheela

Hi,
There may be many issues like:
If you have any routines, check the syntax.
Check all the fields are mapped properly or not.
Check any currency or unit conversion in transformation.
Data type mismatch -> make sure source and target infoobject either numerical or interconvertible.
Length mismatch between source and target infoobject.
Rgs,
I.R.K

Error while activating in 3.1H

Hi Guys,
I have an issue, I am copying a standard program for payment advice RFFOD__V into a Z-program ZRFOF__V and is working fine.
Now I have got another copy of RFFOD__V i.e. ZRFOD_B from a portugal system and now when I am try to copy the program ZRFOD_B from Portugal system to my system, I am getting some errors while activating stating that some data elements are not defined. The same data elements are used in the standard program RFFOD__V and is activating correctly, it is also working fine with ZRFOF__V, the problem only lies with ZRFOD_B.
Please note that I am using 3.1H system. Also please let me know how do you activate multiple programs together (i.e. a program and certain includes in 3.1H system).
Awaiting for your reply,
Thanks and Regards.
Mohammed.

Mohammed:
It's been a while since I used 3.1H, but when you go to activate your program, doesn't it give you a list of all inactive objects? If so, can't you highlight the program and all related includes and click on the green check mark to activate all programs at the same time?
.. Craig

Cache refresh error, while activating changelists

Similar Messages

Maybe you are looking for