Cache settings in BI7. Data still not displayed correctly in RSRT

Good day
Please assist? I did scan SDN for a similar problem and did check the CACHE settings in RSRT etc.
My problem is: If I check the data in the DSO, then the updated information that was loaded yesterday is displayed. When I run the query, it does not display the last loaded information. I have run the query in RSRT and the updated information does not display either. I have changed the cache properties of this query to different settings already, and running the query from RSRT, with no success.
I also checked the query itself (design) It is not restricted to anything. User selects 0CALMONTH as variable only. I have logged out and in again after each Cache setting, no success of displaying the updated DSO information.
Can anyone please tell me why the query does not pick up the latest information from the DSO?
Thanks in advance.
Cj

Hi Cj,
Is the last request marked as Ready for Reporting? This needs to be the case before the latest data comes up in the query.
Hope this helps!
Regards,
Saurabh

Similar Messages

Date can not display correctly in excel from .jsp

Hi,
I create a .jsp report to export the data to excel. the report run OK, except the date field can not display correctly.
for example in database :start date ='01-oct-2003'
in the except it displays to 02/06/02.
It seem all the date field can not be control in the report, and control by somthing else
Doese anyone come accross this problem?
Thanks

Hi Rong,
Are you using the following demonstration to build your JSP?
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
(Output to Excel with Oracle9i Report)
I tried to do the same, and inserted a database date field in the JSP using Reports. I found the following:
While making the template inside Excel, if I make sure that the format of the date cells is "Date" - some particular date format, the date field values from Reports does not get exported correctly.
However, if you make sure that inside the template, the format of the date cells is not date, but "General", then the date field values are correctly exported to Excel.
Pl try it and let us know.
Navneet.

Query on Multiprovider - Data is not displayed correctly

Hi,
I have two cubes in a multiprovider.
1st has following Characteristics :
1. Service Order
2. Product line code
3. Cost Center
4. Fiscal Period
5. Fiscal Year
6. Actuals - Key Figure
2nd cube has
1. Product Line code
2. Cost Center
3. Budget type
4. Fiscal Year
5. Fiscal period
6. Budget Amount - Key figure
I have a query to display: Service Order, Product line, cost center, fiscal period, actuals and budget amount.
When I execute I get 2 rows:
1 st row displaying - Actual values with all the data
2nd row displaying Product line and Budget with all other fields containing '#' sign or "not assigned" .
I will appreciate if you can tell me what mistake I am doing. I have checked the multiprovider 'Identification' - all the fields are selected.
Thanks in advance.
Regards
Jitendra

Hi Jitendra,
This is because you have got service order charcterstic in 1st cube only and does not exist in 2nd cube. when you try to display Service order, you will get two records. If you remove service order from display of query, you will be able to see one record as charcterstics are common in both cube.
If you want to display service order and wud like to resolve this issue, try the following:
Restrict Budget amount with characterstic service order and right click it and select Constant. Then execute the query.
Cheers
SB

Integer Data Type not displayed correctly in Interactive Report

Hi,
When creating a report using BI Publisher 11.1.1.6.2 it appears that any of my fields that contain Integer values (regardless of the order in which the field is displayed) do not correctly display - instead they are displayed as NULLs with the occasional value in a field.
This is only apparent when displaying the report using the Interactive viewer - when selecting another method (i.e. HTML, Excel etc) they appear correctly.
Has anyone come across this before?
Thanks

Hi Craig
Did you find a solution for this issue? we have same exact issue. Please let me know
Thanks
slokam

0 margins and 0 padding still not displaying correctly in Internet Explorer

Hi I have designed a page for my site that works perfectly in safari and firefox but of course in internet explorer it doesn't. The content under the slideshow is meant to line up with the edge of the slideshow. This is the linkhttp://www.kimberleywebdesign.com.au/Links.html.
The divs and the tags within them, have 0 margins and 0 padding with the exception of top and bottom padding, so even if internet explorer doubled my margins - double nothing is nothinng ?? I am trying to understand why the problem occurred?

My understanding is that IE misinterprets text-align:center in the #wrapper div.
Change:
#wrapper {
width:48.75em;/*780px*/
margin: 0 auto;
text-align:left;}
to
#wrapper {
width:48.75em;/*780px*/
margin: 0 auto;
text-align:center;}
Then add text-align: left to each div where the text needs to be left aligned
e.g.
#portfolio {
margin:0 auto;
padding:2em 0 0 0;
width:680px;
text-align:left}
and so on. Worked OK for me in IE8.
See: http://www.andybudd.com/archives/2004/02/css_crib_sheet_3_centering_a_div/
Add this tip, taken from the link above, for good measure:
"This gets IE up to scratch. However this is the step I always forget. In Mozilla, if you reduce the size of the browser window, half of your centred div hangs off the left of the page. This is an odd one, but I've been reliably informed that it's the correct behaviour. To prevent this, just set a min-width on the body tag."

Date not displaying correctly

Hi,
we have an issue where date is not displaying correctly in report. it shows 1/1/1990. even in universe it shows the same value 1/1/1990. but if i run query at DB level it shows the correct date. Reporting Database is Sybase.
we are on Bi 4.0 SP 6.
Any Ideas.
Thanks,
Yogesh.

HI Farzana,
Finally,i have narrowed down the issue. So here it is,Initially we were seeing date as 1/1/1900 in webi rich, IDT and BI LaunchPad. so than we have made changes to sybase. prm file in following location
........\dataAccess\connectionServer\sybase\extensions\legacy
in prm file the input date parameter is as below
<Parameter Name="USER_INPUT_DATE_FORMAT">'mm/dd/yyyy hh:m:s am/pm'</Parameter>
we changed it to
<Parameter Name="USER_INPUT_DATE_FORMAT">'mm/dd/yyyy hh:mm:ss A'</Parameter>
and than we see correct date in IDT and Webi rich but not in BI LaunchPad. the connection we were using in universe is ODBC. so i have created a new connection using sybase CTL client and now i see correct dates in BI LaunchPad also. So i am not sure if i need to make changes to prm file in /dataAccess\connectionServer\odbc\extensions location for the report to show correct values using ODBC.
Any Idea.
Thanks,
Kumar.

Umlauts not displayed correctly

Hi,
We have developed a screen in 12.1 and the umlauts (German & Spanish) are not display correctly. Is there a language pack / custom actions we need deploy for this to work properly?
Regards,
Chanti.

Its those special characters with a pair of dots on their head, like ä etc. These are not being displayed properly in the Web UI screens after upgrading to 12.1.
These special characters are coded in the alert/warning/error messages in a .js file. Two things here -
i) When we did the migration from 11.5 to 12.1, those got transformed to a [] (read squarebox) sorts. Are these something that the migration tool can't handle as desired?
ii) We fixed these characters manually in the code in 12.1. But when we run the script they are still not displayed correctly in the Web UI, for instance ä is being displayed as A~, something like that. Wondering if we need to deploy some custom actions or add a line at the top of .js or .html code?
Regards,
Chanti.

Korean data is not displaying in BI system

Hello BI Experts,
Do you have any idea or some settings in BI system as korean data is not displaying in BI ODS, while source system in correct data. Korean data is displaying # value in PSA and ODS.
Thanks,
Sapna

hi,
as mentioned in earlier post ,you need to have your system unicode enabled,
check in menu -> system->status...in your BW system field called unicode system
Also try running program program RSCPINST - which is used to set the language setting to load the data.
if the chain language setting is not maintianed for loading :
click on Add button ->Key :KO and Language :korean->save it
try to load the data again and check it
hope it helps
regards
laksh

Numeric data is not displayed in BI Publisher 11g report

Hi,
I'm using Oracle BI 11g (11.1.1.6.0).
I'm experiencing a serious issue with numeric data in reports created with Publisher.
When I define the query in the data model, numeric data gets declared as "integer" (even if it should be "double"). Anyway, when creating the layout all data is correctly shown.
The issue emerges when I run the report in interactive mode: numeric data is not displayed at all.
If I run it in HTML mode or other, I get proper results.
I tried to explicitly CAST numeric data in the query to number(21, 6) but I get no different result.
Any help or suggestion is warmly welcome.
Thanks,
Cristina

Yes, assuming that you are using the Standalone version, following are some excerpt from user guide.
10g see Oracle® Business Intelligence Publisher
Report Designer's Guide
Release 10.1.3.4
Part No. E12187-01
Chapter 6 Building a Data Template
Supported Column Types
CLOB (conditionally supported)
The CLOB must contain text or XML. Data cannot be escaped inside the CLOB column.
And for 11g see
Oracle® Fusion Middleware
Data Modeling Guide for Oracle Business Intelligence Publisher
Release 11g (11.1.1)
Part No. E18862-01
Chapter 3 Creating Data Sets
Using Data Stored as a Character Large Object (CLOB) in a Data Model
BI Publisher supports using data stored as a character large object (CLOB) data type in
your data models. This feature enables you to use XML data generated by a separate
process and stored in your database as input to a BI Publisher data model.
Use the Query Builder to retrieve the column in your SQL query, then use the data
model editor to specify how you want the data structured. When the data model is
executed, the data engine can structure the data either as:
• a plain character set within an XML tag name that can be displayed in a report (for
example, an Item Description)
• structured XML
Cheers,
ND

Navigational Attribute data is not display in Cube level and reporting

Hello ALL
Iam facing a problem like,I created Navigational attribute and I selected that navigational attribute in cube level also but data is not display in cube level.
What will be the problem?Pl help me out.
regards
balaji

Hi Dinesh
You mean base characteristic means loading data after creating Navigational attribute?Is it this way,(orelse can u tell me about this base characterstic)
Yes after making that particular attribute as a navigational attribute I loaded data in master data tables.
How to run Attribute change run?can u give me steps
regards
balaji

I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC. I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display. Any suggestions?

To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

Query not displaying correct data

hi all
my query is not displaying correct data.
in data target secondary sales is showing 1.800 value but in query it is showing
2.00.my requirement is my query shuld show 1.800 value. i also tried to change decimal points but not changes has happend.plz let me knw what is the problem
thanks in advance
shalini gupta

With which u r reconciling the data.
With R3 or Cube.
I think check ur key figure, have u taken the key figure 'with TAX' one or with out tax one??
Regards,
Manoj.

Date Format was not displayed correctly

Hi All,
        We are developing WebDynpro Application successfully....but the date format was not displayed correctly.
the RFC Date format is : 05/23/2007
but in webdynpro we are getting date is wrong....we are getting date is : 09/05/2008.
the below one is our coding for date display format.....
public java.lang.String DisplayingDateFormat( java.lang.String date )
    //@@begin DisplayingDateFormat()
                    // Current date Format in BW
SimpleDateFormat sdf = new SimpleDateFormat("MM.dd.yyyy");
String ChangedDateFormat=null;
try{
//Parsing String to Date
Date sqlDate =sdf.parse(date);
Locale userLocale=WDClientUser.getCurrentUser().getLocale();
DateFormat dateFormat = DateFormat.getDateInstance(DateFormat.DEFAULT, userLocale);
//Converting Date to String
String newDateString = dateFormat.format(sqlDate);
ChangedDateFormat=newDateString;
I mention my user country is Germany.
can u tell me any one why we are getting wrong date.....
Really i appreciate.
Thanks and Regards,
Abhiram.

Too bad you can not offer yourself points. LOL

I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system som

I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system some how. How can I retrieve these images? Is there a re boot for lightroom? Need help ASAP!

You have probably moved the files outside of Lightroom. The images you see in LR are previews that were made before you moved the files.
Do a search for the files/folders using your computers operating system. (Explorer/Finder)
Once you have found them, you can point LR to the right location.

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

Hi ..
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Back to Safari. Press Command + Option + E to empty the Safari cache.
Quit and relaunch Safari, try a video.

Cache settings in BI7. Data still not displayed correctly in RSRT

Similar Messages

Maybe you are looking for