CacheCade Pro 2.0 and FancyCache - good for video / Premiere Pro?

Here are some links to the products and to the review of those products. Anybody used these or have opinions of how they might work for video editing?
Fancy Cache
http://www.romexsoftware.com/en-us/fancy-cache/index.html
http://thessdreview.com/our-reviews/romex-fancycache-review-ssd-performance-at-13gbs-and-7 65000-iops-in-60-seconds-flat/
CacheCade Pro 2.0
http://www.lsi.com/channel/products/storagesw/Pages/MegaRAIDCacheCadeSoftware2-0.aspx
http://www.storagereview.com/lsi_megaraid_cachecade_pro_20_review

i got 4.7ghz but my gtx is just 850 right now but i could do higher, what voltage did you have it set? and i have the EVGA 2.5GB version, may not overclock as well if you used the 1gb version
-Matt
Date: Mon, 16 Apr 2012 01:28:27 -0600
From: [email protected]
To: [email protected]
Subject: CacheCade Pro 2.0 and FancyCache - good for video / Premiere Pro?
    Re: CacheCade Pro 2.0 and FancyCache - good for video / Premiere Pro?
    created by Crist OC/PC in Hardware Forum - View the full discussion
Hi Nott.
RamCash let you allow to set priority on Writing, Latency and some Others important details.
If you have the same CPU and GPU as I have we can start making sure this:
Your CPU is o.c. @ 4.7ghz or+.
GPU o.c.930mghz" this improve my time approx 7 sec."
Use 10gb of ram for ramcache, set latency on 10, and set writing priority.
Please let me know what HardD config you have and I will do with it.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4337221#4337221
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4337221#4337221. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Hardware Forum by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

My Mac mini OS is a 10.6.8 and after paying for Adobe premiere 13 download I realized that my computer needs to be 10.8 or greater.. I thought that I had read that 10.6.8 was enough but I must have been mistaken.. Any suggestions or am I out of luck?

My Mac mini OS is a 10.6.8 and after paying for Adobe premiere 13 download I realized that my computer needs to be 10.8 or greater.. I thought that I had read that 10.6.8 was enough but I must have been mistaken.. Any suggestions or am I out of luck?

See if this helps:
Return, cancel, or exchange an Adobe order
Gene

The new i mac is it good for video editing

apple just release 2 new models of imac they still looking very good but they are considerable cheaper so i wonder if any of these models good for video editing.

some say the pice cut is not worth it
http://arstechnica.com/apple/2014/07/1099-imac-review-lose-50-of-your-performanc e-to-save-18-of-the-money/

Macbook Pro Good for Video Work?

Hello everyone,
I was just wondering if the Higher end 15" or 17" Macbook Pro would be adequate for video editing with FCP? Does anyone use laptops for video editing? I previously used a 2007 MBP and it wasn't very good with rendering and real time playback.
Thanks,
Chris

Hi Chris,
I don't do much video work myself but I have a pool of users who do that I support on campus. I asked one of them after seeing your post and this is the response I got:
+I definitely recommend to the user to get the machine with 512MB of VRAM and upgrade to 8GB if it's a production machine where time is money. While the 17s we have get the job done, they're not our primary production units, they're our mobile, "in the field" units for quick touch up or editing work. We have a series of Mac Pros that do the majority of our work and given the price vs. performance comparison between a Mac Pro and a 17" MacBook Pro the Mac Pro far exceeds the portability advantage.+
Hope that helps.

Vector (good for storing) and arrays(good for numerical sums, multiplying)

Hi guys, I am trying to use vectors because I need a variable lenght and store 2D arrays in one coordenate of a vector. That is why I am using vector instead arrays. I can turn the type of variable using "Integer" (instead of "int" as arrays), "Double" (instead of "double") and so on. The problem is that it doesn't allow me to operate, it is very good for storing, but I need to be able to operate, multiplying, sum, etc the elements there are in the coordenates. And I think it is not possible.
What u think about it? I can only store stuff ion a vector, I cannot operate. Besides I cant turn a data from "Double" to "double", I can either use arrays OR vectors, but not both of them at the same time.
You think i am wrong?, because I mean in that case, Java is not very useful to do this numerical problem.
Thanks.
This is only a class of the program I am doing.
import java.util.*;
class SolveDomain {
     int newton_iter = 0, m = 0, work_count = 0;
     double t = 0, dx, dy, dt, start_t=0;
     double[][] v;
Details obDetails = new Details();
     public double[][] solveDomainMethod(Double vAxn, Double vAyn, Double vBxn, Double vByn, Integer nxn, Integer nyn, double dt, Double error1n, Double error2n, double end_tn, int stepsn, Integer kcn, Double u_n[][], Double v_n[][], Double bc1, Double bc2, Double bc3, Double bc4, double u[][]) {
     double dx2, dy2, err = 1000000;
     v = new double[nxn+1][nyn+1];
     DoublevAxn, Double vAyn, Double vBxn, Double vByn, Integer nxn, Integer nyn, double dt, Double error1n, Double error2n, double end_tn, int stepsn, Integer kcn, double u_n[][], double v_n[][], Double bc1, Double bc2, Double bc3, Double bc4;
double k[][] = new double [nxn+1][nyn+1]; double kp[][] = new double [nxn+1][nyn+1];
double kpp[][] = new double [nxn+1][nyn+1]; double dudx[][] = new double [nxn+1][nyn+1];
double dudy[][] = new double [nxn+1][nyn+1]; double d2udx2[][] = new double [nxn+1][nyn+1];
double d2udy2[][] = new double [nxn+1][nyn+1]; double dudt[][] = new double [nxn+1][nyn+1];
double a[][] = new double [nxn+1][nyn+1]; double b[][] = new double [nxn+1][nyn+1];
double c[][] = new double [nxn+1][nyn+1]; double d[][] = new double [nxn+1][nyn+1];
double F[][] = new double [nxn+1][nyn+1]; double A[][] = new double [nxn+1][nyn+1];
double B[][] = new double [nxn+1][nyn+1]; double C[][] = new double [nxn+1][nyn+1];
double D[][] = new double [nxn+1][nyn+1]; double E[][] = new double [nxn+1][nyn+1];
double s[][] = new double[nxn+1][nyn+1];
          KDerivatives1 obK1 = new KDerivatives1();
          KDerivatives2 obK2 = new KDerivatives2();
UDerivatives obU = new UDerivatives();
          CalcPdeCoefficients obPde = new CalcPdeCoefficients();
          CalcFdCoefficients obFd = new CalcFdCoefficients();
          Gs obGs = new Gs();
dx = obDetails.seg(vBxn, vAxn, nxn);
dy = obDetails.seg(vByn, vAyn, nyn);
dx2 = dx*dx;
dy2 = dy*dy;
if (bc1 != -999999999) obDetails.initialiceBCDomainL(dx, dy, vAxn, vAyn, bc1, u);
if (bc2 != -999999999) obDetails.initialiceBCDomainU(dx, dy, vAxn, vAyn, bc2, u);
if (bc3 != -999999999) obDetails.initialiceBCDomainR(dx, dy, vAxn, vAyn, bc3, u);
if (bc4 != -999999999) obDetails.initialiceBCDomainD(dx, dy, vAxn, vAyn, bc4, u);
obDetails.source(dx, dy, vAxn, vAyn, s);
do {
++ newton_iter;
if (kcn == 1) {
          obK1.calc_k(u, k);
     obK1.calc_kp(u, kp);
     obK1.calc_kpp(u, kpp);
          } else {
               obK2.calc_k(u, k);
          obK2.calc_kp(u, kp);
          obK2.calc_kpp(u, kpp);
               obU.calc_dudx(u, dx, dudx);
          obU.calc_dudy(u, dy, dudy);
               obU.calc_d2udx2(u, dx2, d2udx2);
               obU.calc_d2udy2(u, dy2, d2udy2);
          obU.calc_dudt(u, u_n, dt, dudt);
          obPde.calcPdeCoefficientsa(k, a);
          obPde.calcPdeCoefficientsb(kp, dudx, b);
          obPde.calcPdeCoefficientsc(kp, dudy, c);
          obPde.calcPdeCoefficientsd(kp, kpp, dudx, dudy, d2udx2, d2udy2, d);
          obPde.calcPdeCoefficientsF(k, kp, dudx, dudy, d2udx2, d2udy2, dudt, s, F);
          obFd.calcFdCoefficientsA(a, b, dx, dx2, A);
          obFd.calcFdCoefficientsB(a, b, dx, dx2, B);
          obFd.calcFdCoefficientsC(a, c, dy, dy2, C);
          obFd.calcFdCoefficientsD(a, c, dy, dy2, D);
          obFd.calcFdCoefficientsE(a, d, dx2, dy2, dt, E);
          obGs.gsMethod(v_n, A, B, C, D, E, F, dt, error2n, v);
          m = m + obGs.iter;
          for (int i=1; i < u.length - 1;i++ ) {
               for (int j=1; j < u[0].length - 1 ;j++ ) {
     u[i][j] = u[i][j] + v[i][j];
err = 0;
          for (int i=0; i < u.length ;i++ ) {
               for (int j=0; j < u[0].length ;j++ ) {
               err = err + Math.pow(v[i][j],2);
          err = Math.sqrt(err);
while (err > error1n);
     return u;
public double[][] rectangleDomainF (Vector vAxvector, Vector vAyvector, Vector vBxvector, Vector vByvector, Vector nxvector, Vector nyvector, Vector error1vector, Vector error2vector, double end_t, int steps, Vector kcvector, double numberdomains, Vector bc1vector, Vector bc2vector, Vector bc3vector, Vector bc4vector) {
               double u[][] = new double[u.length][u[0].length];
               double dt = obDetails.seg(end_t, start_t, steps);
               Vector uvector = new Vector();
               Vector vvector = new Vector();
     do
++work_count;
          t = work_count * dt;
for (int k = 0; k < numberdomains ; k++) {
     solveDomainMethod((Double)vAxvector.elementAt(k), (Double)vAyvector.elementAt(k), (Double)vBxvector.elementAt(k), (Double)vByvector.elementAt(k), (Integer)nxvector.elementAt(k), (Integer)nyvector.elementAt(k), dt, (Double)error1vector.elementAt(k), (Double)error2vector.elementAt(k), end_t, steps, (Integer)kcvector.elementAt(k), (Double [][]) uvector.elementAt(k), (Double [][]) vvector.elementAt(k), (Double)bc1vector.elementAt(k), (Double)bc2vector.elementAt(k), (Double)bc3vector.elementAt(k), (Double)bc4vector.elementAt(k), u);
                                                       uvector.insertElementAt(u, k);
          vvector.insertElementAt(v, k);
while (t < end_t);
return u;

The only way to, for instance, multiply a Double object by another Double object is to convert them back to primitives, multiply them, and create a new Double instance:
public Double multiply(Double lhs, Double rhs) {
   return new Double( lhs.doubleValue() * rhs.doubleValue() );
}This is just an overhead that you have to accept if you want to use collections with primitive type data.
Coming soon in 1.5 (which is in Beta now and available for download in the usual places) a new feature called auto-boxing will do a lot of this automatically for you. You need to be aware that it's doing exactly the same operations with the same performance overhead; but it does save a lot of typing.
Thus in 1.5 the above becomes:
public Double multiply(Double lhs, Double rhs) {
   // Under the hood this is IDENTICAL to the above example
   return lhs * rhs;
}Now, addressing your post directly:
Besides I cant turn a data from "Double" to "double"
Yes you can, as in the first example, the doubleValue() method converts a Double object to a double primitive.
Java is not very useful to do this numerical problem.
If you need math performance, you need to use primitives, yes. Yes, that will preclude the use of collections.
Dave.

Is this macbook good for video games

what is the best mac for video games?

MacBook Pro has two graphics processors, the AMD comes in when the graphics load is high.
The iMac has a much better graphics processor and can handle much more memory and faster cpu for better response.
The Mac Pro has an even higher level graphics processor, memory, cpu, plus can take very large cinema displays and handles dual displays very well.
Take you pick depending on just what you want in the way of gaming capability. How much do you need, 3-D? Go to the Mac Pro for that level.

Is it possible to "partition" Iphone or Ipad when syncing? What I would like to do is set up Itunes to use say 15GB for photos 15GB for music and 15 GB for video. Any help would be appreciated. Thx

I am using a Widows 7 PC with the latest Itunes. I would like to alot hard disc space on my 64GB Ipad2 as follows 15GB for music, 15GB for Video and 15GB for photos. I would then like Itunes to autofill from my PC. Can this be done? The same question also applies to my Iphone4. Thanks in advance

To my knowledge the iPod can only be used as a secondary monitor since you have to boot up the Mac and turn on the secondary display. You would still need a KB and pointing device for the Mac
However, you can log into the Mini from an iOS device like an iPad using app like LogMeIn, GoTo MyPC or TeamViewer on both the Mac and the iPad. You use the touch screen on the iPad for all control of the Mac.
As you said,that would be tedious for a lot of typing but you could use a BT keyboard for the iPad.

OS X 10.6.8 and missing plugin for videos despite latest version of Adobe flash player. Any suggestions please?

I have OS X 10.6.8. Despite downloaded latest version of Adobe flash player and VLC 2.0.4 I`m in trouble with `missing plugin` for videos. Any suggestion please?

Uninstall old Flash plugins then reinstall new ...
Uninstall > Troubleshoot Flash Player | Mac OS
Very important uninstall the old one first.
Then reinstall > http://get.adobe.com/flashplayer/?promoid=JZEFT

Which MacBook Pros are safe to buy used and not recalled for video graphics/display failure (due to overheating)?

I've had some bad luck with MacBook Pros lately. I bought a 2010 model but it was effectively a Total Loss because of a vehicle accident. From searching with Google, people have reported logic board failures. Who knows if mine would've failed, too.
Then I bought an older 2009 MacBook Pro and that eventually failed due to the graphics chip failure. There was a recall on it but the problem occured JUST after the recall period expired. I don't have a microwave solder lying around or a proper setup to fix the problem myself.
Now, I im in the market for a used MacBook Pro, as a gift (I can't afford a new one right now) (with the luck I have, I'm basically done with them but the person wants one).
I've seen some 2011 models priced quite attractively, which caused me to do a quick check and find that the (early) 2011 models also have video graphic failures. I don't get it. I understand paying for the name, but the name also has to have reliability and you don't hear about video graphics failures from some of the more well known PC manufacturers..just saying.
I'd strongly prefer to not purchase any retina models, if at all possible. I want a mechanical SATA HDD and an optical drive. I oppose proprietary components -- as I understand it, the retina models make it nearly impossible to upgrade.
Which used MacBook Pros are safe for purchase? In other words, which ones do not have recalls or are susceptible to video graphics/display failures? I don't want to put the money down for one, only to hear it kicked the bucket and it needs service and is out of warranty.
Thank you for your time.

WindowsGreaterThanUnix wrote:
I've seen some 2011 models priced quite attractively, which caused me to do a quick check and find that the (early) 2011 models also have video graphic failures.
I have an early 2011 MBP and have haad zero problems since it was new.

Usb 6211 and LabView - good for IV characteristic aquisition?

Hi there,
I pre-emptively declare my lowest level in using LabView and all the annex tools, so my question won't result too silly.
I need to automatically acquire the IV characteristics for 4 solar devices, so I am thinking about connecting them to the USB 6211 in order to switch from one device to another one.
My question is: can I use a LabView Program in order to simulate the Voltage signal to apply (range c.ca -1 to +1 V), and then collect the relative current?
If so, how??
Many thanks in advance for any sort of help.
Laura

http://zone.ni.com/devzone/cda/epd/p/id/5918
http://zone.ni.com/devzone/cda/tut/p/id/7229
LabVIEW has a toolkit available for this. It uses an SMU card but you could simulate that with your 6211 and a current sensing resistor.
Using LabVIEW: 7.1.1, 8.5.1 & 2013

Step between FMS2.0 and Orion/edge for video chat

We are planing a deployment of 4 FMS 2.0 Pro boxes with
hardware load balancing on port 1935 working successfully.
This allows for vertical scaling as we grow.
Our troubles are comming in video chat. I cant cluster chat
till Orion/Edge, but our needs are just barely outside a single box
configuration. Has anyone mastered video/chat pre-clusterd
solutions?
thanks!

AIM said this about AIM 6.5 http://www.aim.com/helpfaq/starting_out/getstarted.adp#608
There is no information that they have posted that says AIM 6.8 is any better.
Some say it will work (AIM in General that is)
This is certainly needed http://www.ralphjohns.co.uk/page12.html#_Service to allow the app through the Windows Firewall.
In the AIM Preferences you will also have to select the camera in the Enhanced IM tab
The Mic should be selected in the control Panels as a System wide thing.
AIM since before AIM 5.9 has used port 1024-5000 as well as the Login on port 5190 and there is no reason to suspect it is any different now.
These ports will need to be allowed or open in your routing device.
9:18 PM Monday; July 21, 2008

IChat and "Insufficient bandwidth" for video chats

I have spent hours and hours trying to solve this problem, after having spent a lot of money for an iSight specifically for use with iChat, which I now find don't work together. I just made the switch from PC to MAC and have been nothing but amazed until this... Here I have to give a huge "thumbs down", though. Apple has really screwed this one up.
The error when trying to connect video is "Insufficient bandwidth to maintain..." and sometimes "A communications error has occurred".
If anybody out there, especially APPLE can help me fix this, I'd be very appreciative. Note that I had GREAT success with aMSN, Yahoo Messenger, and Skype (for the mic).
Based on lots of reading, here are things I've done without success. Note that I have a very good ADSL-2 20MB connection! The machine is a new Mac mini Intel core duo.
1. Set the QuickTime streaming bandwidth to below what I know the ADSL line can do.
2. Set port forwarding for all the ports I found in all the FAQs, Apple technical documents, etc., etc.
3. Tried turning the UPNP of the ADSL modem both ON and OFF.
4. Made sure there is no firewall.
5. Tried every setting for the video bandwidth setting in iChat.
6. Tried both .mac and AIM accounts. (You never know...)
7. Made sure I have none of the known conflicting software indicated by Apple.
8. Made sure that Apple Remote connections are disabled.
9. Upgraded to 10.4.7.
I have actually read that some people got around this problem by connecting their MAC directly to their ADSL modem and (presumably) turning off its routing functions. But what am supposed to do with my 4 other computers, then?
Apple, please FIX THIS! There are abosolutely tons of people with the same problem and no solution.
Mac mini intel duo Mac OS X (10.4.6)

Ok Ralph... Thanks again.
When you said "two lots", I thought you may have meant that the DHCP server might be giving out IP addresses on two sub-nets (192.168.0.xxx, 192.168.1.xxx, etc.).
Since all of my machines have a static IP (except my business laptop, which I have to drag around to customer sites), I actually tried turning off the DHCP server to see if it helped. It didn't.
Also, I don't quite follow what you're saying about the NIC actually having two addresses (masquerading)... one from the modem and one from the DHCP. This should not be true, as it is the specific purpose of NAT to avoid this. Only the modem/router should really know "who is who" and relay packets appropriately.
The only pseudo-exception I can see for this is if the iChat software on the client and/or the AIM server is passing through the external/internal IP addresses as part of its data packets... ie., not in the IP headers to be handled normally by the NAT layer. If so, then this is just quite simply a design flaw in iChat... and a really stupid one.
One other point... Should I understand from your reply that if I set the modem up for "single user" mode (ie., turn off NAT and DHCP), then I would need to manually forward the right ports?
Mac mini intel duo Mac OS X (10.4.7)
Mac mini intel duo Mac OS X (10.4.6)

Movieclips no good for video?

I have been reading the article
Migrating
Flash Project to Video where Chris Georgenes is saying you
should avoid Movieclips in this particular scenario.
I have seen this in other texts also, but at the same time I
think I've read that this is something that is corrected now. That
you can use MC's and still create a functioning video. Correct?
And if so, is there anybody who could redirect me to an
article in the same subject, but more recently written?

Found out that - since CS3 - Movieclips are OK for use when
producing video.
Still would like to learn the best practice for taking swf to
high quality media that would be suited for DVD and/or big screen
projection. How to think regarding Pixel Aspect Ratio for example.

QoS and DSCP settings for Video Streaming

So I've got this beautiful topology at home that consists of three WAP 121 and a RV320 as the default gateway.
How should I tweak their QoS and DSCP parameters to optimize Video Streaming applications like YouTube, Netflix and such?
Thanks community!

Open the set up page of the router by typing the IP address of 192.168.1.1 or open Cisco connection go to router settings
Then go to advanced settings and then click copy password and hit OK ..once you on the router page
Go to wireless and click manual after that create network name (SSID) Then set the wireless security as WPA2 personal
Which would give you stabilize connectivity then upgrade the latest firmware on the router and reduced the MTU to 1462..
Unplug the power from the modem and the router
Wait for 1 minute and plug them back wait for 1 minute and then check the speed .

I'm disabled cognitively; please where do I download Google for my iPad and the flash for videos sent me? Thank you! apple!

Hi Apple iPad,
I am disabled physically and cognitively.
I want to download Google Chrome on my iPad as well the flash for my receiving videos on Facebook, etc.
I was receiving Facebook videos from friends globally, without issue when for the past 3 days or so, facebook states I need a Flash player to view videos.
Please would you be so kind as to assist me further? I would like direct links to download both applications.
Thank you very much.
Tatiana A. Kostanian
% MHONA International
<Email Edited by Host>

You can download Chrome from the app store. There is no 'Flash Player' for iOS. There never has been and there never will be. Adobe has terminated all efforts to develop mobile flash.

CacheCade Pro 2.0 and FancyCache - good for video / Premiere Pro?

Similar Messages

Maybe you are looking for