Caching search results required

We have the following scenario:
1. Custom search portlet is on a tab on a page and
is used for searching portal items.
2. When the search results are displayed - the item
has an Edit link associated with it which links to
a custom jsp page where the item attributes can be
edited.
3. After editing the attributes on the jsp page, we would like
to return to the page where the user came from (the search
results) - but the last search results must be retained on the
page when the user returns back. Currently every time we go back to the
search results - the old results are not cached.
Any thoughts on how we could achieve this caching of
the search results?
Thanks,
Suzanne

Hi,
Unfortunately that is not something that is happening with us..my search form still shows the same serach results of the previous search even if i navigate to another tab and get back to it !
I am using a custom search portlet with Oracle 10g as portal version
thanks

Similar Messages

Why is there extra space above google search results?

When I do a google search, an excessive amount of white space appears above the search results, requiring me to scroll down the page to see even the first choice. Only started happening today.

It's autopager. Don't do all the stuff above.

Hi everyone for about 2 weeks now i cant seem to get any search results with the mobile myspace app on ipod touch 4g i have tried clearing cookies and cache ,resetting ipod uninstalling and reinstalling but nothing seems to work any ideas?

hi everyone for about 2 weeks now i cant seem to get any search results with the mobile myspace app on ipod touch 4g i have tried clearing cookies and cache ,resetting ipod uninstalling and reinstalling but nothing seems to work any ideas?

- Have you tried going to the developer's support website/contacting the developer?
- Try a reset. It surs many ills and nothng is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

IProcurement - new VO for search results not working properly?

Greetings
There is a requirement for the project I´m working, where the search results on iProcurement must be filtered depending on some profiles setted for the user.
So, basically the search shouldn´t look into ICX_CAT_ITEM_PRICES, but on a custom view that works on that table, but filtering results.
Unfortunately, that´s not working. I extended the VO (which seems to be SearchResultsVO and ItemDetailParametersVO), so the queries are now pointing to the view. But once the search is performed, the results are not filtered. It´s the very same results as before.
Am I doing something wrong? There is some cache that works even after the Apache server is restarted? Please I could really use some help on the subject! Thanks!
Best Regards,
Thiago

Thiago,
Why don't you use a local Jdev setup for substitution process so that testing and debugging is easier.
Follow these steps for testing locally:
1. Add your VO to AM.
2. After extending VO, do the following,
Right-click on your project in the Navigator pane, and select Edit Business Components Project (or right-click on the project's .jpx and select Edit <project>).
a. Select the Substitutions section.
b. From the Available list, select the base object that you want to replace and press ok.
3. Normally, the BC4J runtime does not read a project's .jpx file. To override this default behavior in JDeveloper so you substitutions can be used, you must do the following to ensure that the classpath contains the .jpx file.
a. Right-click on your project and select Project Settings.
b. Then in Configurations | Development | Runner, add -Djbo.project=Name to the Java Options. Note that the Name value is the .jpx file name without the .jpx extension (for example, ExtendLabSolutions). Be sure to include a space between any existing options and the new option.
--Shiv

Issue in disabling button and retaining search results of query bean

Hi,
I need help in 2 issues
1) I have a query bean and an advanced table attached to it. I have enabled table actions and put a button inside that. The requirement is the button should be enabled only if a record is present in the advanced table. If for a search parameter, no results are displayed in the advanced table, the button should remain disabled. The moment the results are populated in advanced table the button should be enabled. Please let me know how this can be achieved.
2) In the advanced table there is a column of type Link. On clicking this link i am forwarding the control to some other OAF page AA. I am retaining AM here. From this new OAF page AA user can move to some other OAF pages B or C. All these pages have different AM. There is a link called return to original page on page AA which takes user back to the search screen. When user goes to page AA and comes back to search screen without going to page B or C the search results are displayed on the page, but when user goes from page AA to page B or C and finally returns to the search screen, the data in search results along with search criteria are lost. The search screen is completely blank.
I need to display the search results/search criteria no matter what navigation user is doing. Is there a way i can save the search query that got executed on the click of search button. I can re-execute the query when user comes back on search screen.
Please let me know how to achieve these 2 functionalities.
Thanks,
VG
Edited by: VG on Sep 6, 2011 2:55 PM

For (1)
I guess you want to select single/multiple rows after the table is populated in table and perform an action using button.
If that is the case then do not put button under table actions. Instead put it under multiselection region. Then button only gets displayed when rows are populated.
If that is not the case then get a handle to button (use findChildRecursive, findIndexedChildRecursive may not work) and disable/enable it.
For (2).. If you are on r12 below can be useful :- (taken from 12.1 framework guide)
Using Search Persistence
In the past, if a user performed a search and then drilled down to a details page, search criteria was lost when
the user navigated back to the Search page, unless the developer retained the AM or created a custom
implementation to persist the search criteria. As of Release 12, developers no longer need a custom
implementation to persist search criteria, as the query region now has an automatic search persistence
mechanism in place.
Generally speaking, you should still retain the AM in favor of using the automatic search persistence
mechanism for performance optimization reasons. However, if retaining the AM presents a scalability issue
because the underlying view object (VO) had hundreds of attributes, then you should you turn off retainAM and
allow the query region to automatically handle all the search criteria binding and use the automatic search
persistence mechanism.
Note: If you retain the AM state, the automatic search persistence mechanism will not be active. The search
persistence mechanism is automatic only if the AM state is not retained.
When a user selects the Go button to initiate a search on the query region, the OAQueryBean automatically
caches the search criteria on the user session. After the user drills down to the detail page of the Search
results and then returns to the Search page, the OAQueryBean restores the search criteria from the cache and
re-executes the query using that saved critieria.
Note: Since the query is re-executed, any sort, navigation or transient UI state of the results table will not be
preserved. Saving the entire table state presents high overhead which is what this particular feature is trying to
avoid.

Error while adding a 'Ext No' field to Activities Search Result List on UI

Hi Experts,
The requirement is to add a new display field u2018External Nou2019to the activities SEARCH Result list.
At the moment activities are displayed with start date, end date and category, now the user want to display External No as well.
The details for that
Target:
Component:BT126S_APPT
View:bt126s_Appt/ApptSR
Context Node:BTQRACT
New attribute 'EXTERN_ACT_ID' to be added to the context node.
Source: component: BT125H_TASK
View: BT125H_TASK/TaskDetailsOV
ContextNode:BTACTIVITYH
Attribute:Struct.Extern_Act_Id
BOL Relation:
BOL ENTITY: BTQRAct
BOL Attribute: BTADVSAct -> BTOrderHeader -> BTHeaderActivityExt/EXTERN_ACT_ID
When i tried to added the attribute to the context node BTQRACT, it gave me the error 'method CL_BT126S_A_APPTSR_CTXT CREATE_BTQRACT DOES NOT EXIST.
please give me some inputs.
Regards
Krishna

Hi steve,
Still my issue was not resolved, could you help me to find the exact error.I have enhanced the component, view and context node, still i couldn't able to add attributes to the context node BTQRACT.I tried to add several fields, but it is giving the same error 'METHOD CL_BT126S_A_APPTSR_CTXT' CREATE_BTQRACT DOES NOT EXIST'. I have checked the OSS messages and found 2 relavant to this component. I have implemented both the Sap Notes 1363752, 1226612. Still after implementing the OSS note, i am getting the same error.My guess is one of the method is missing. Please help me out?
Regards
Krishna

Why do google search results reset to match the search bar terms when i use the back button?

Since the update to FF 23, the list of Google search results clears and the on-page search box is reset to match the address bar search box when I hit the back button to re-view the results list after checking a result.
To see this issue for yourself, set your search provider to Google and make sure Instant is on. Type a search term into the search bar and press enter. A google page appears with your results list. Now, change your search terms or conduct a new search directly from the google page (without using the FF search bar). Click on the first result in the search list, then click the back button to return to the search results so you can check a differest result. As FF goes back to the google page, it will reset the on-page search box to match the FF search bar (although you were no longer on this search) and all search results will disappear, replaced by the message "Press enter to search". Pressing enter reconducts your old search, not the one you were on.
This is incredibly maddening since searching for something requires frequent use of the back button to check through the list of search results, and then frequently trying the search again with slightly different terms. Although it sounds like a Google issue, it did not occur on the old firefox and has me wanting to revert. I tried to revert to the old search function via the "keyword search" addon, but this did not fix my issue. Is there a way to force FF to go back to the actual google search page I was just on instead of conducting a new google search from the FF search box when I hit the back button?

In Firefox 23 versions and later the keyword.URL pref is no longer supported and it is no longer possible to specify the search engine for the location bar via the keyword.URL pref.<br />
The search engine that is used on the location bar and on the about:home page is the search engine that is selected in the search Bar on the Navigation Toolbar.<br />
Current Firefox versions do not update the about:home home page until you refresh the page (future versions will do this automatically without a refresh) and that is what happens if you use the Back key.
You can install the Keyword Search extension to specify with search engine to use for the location bar and which search engine to use for the about:home page via the Options/Preferences windows of this extension, accessible via the about:addons page.
* Keyword Search: https://addons.mozilla.org/firefox/addon/keyword-search/

How to change search result list entries?

Hi together,
I'd like to fit the TREX search result list to my own requirements. I've edit the Search Result Renderer Settings, Search Result Layout Set, Search Component Set and the Search Option Set. But that's not enough.
1.) I would like to display the relevant index name, in which the document was found.
2.) For special indexes (not for all!) I want to change the content link:
For example: if TREX is finding an xml-File in index "abc_index" I would like to change the content link from
"https://portalserver/irj/go/km/docs/folder/p76.xml" to
"https://portalserver/irj/go/km/docs/folder/p76.htm"
and from
"https://portalserver/irj/go/km/docs/folder/p76_data.xml" to
"https://portalserver/irj/go/km/docs/folder/p76.htm"
3.) I'd like to display a special part of the document as a explanatory text in the result list.
I think point 1 and 3 are possible with properties and HTML-extractors. But point 2 I'm afraid I have to create my own component.
But how to manage this? I cannot find any code snippets or tutorials or pattern to copy and develop further.
Is it possible or advised to write a WebDynpro? Are there other possibilities? I don't know how to start.
I would be pretty delighted to get any idea...
Thanks a lot
Steffi

Hi Stefanie
1) If you want to be able to show the name instead, you should write your own property renderer. Heres the link for the documentation: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c739e546-0701-0010-53a9-a370e39a5a20 -> How to Implement Flexible UI
Components -> Property Renderer
2) Documentation will be send in a matter of minutes.
3) I also think the web property extractors only work with the web repository manager, because as far as I know that is the only repository manager, where you can select a web property extractor upon creation. I guess you could open an OSS to SAP and ask if its not possible to extract properties in your scenario just to be sure if its not possible. But my guess is that you either have to develop your own repository manager or publish your files on a web server in order to meet your requirements.
Best regards,
Martin

How to sort web app items based on few fields of it on search result page?

I have a web app and its search. The search results are on multiple pages means it has pagination. My client's requirement is to have a feature which will sort results based on some web app items. for example we have a field price so when user select the price it needs to sort from high to low. Any one have idea how to do it?

I have just been playing around with this for something else, all you need to do is duplicate your price field into the weighting field and it will automatically sort from High to low for you.
Cheers
Duncan

Office web Apps preview of SharePoint 2010 source in SharePoint 2013 search results

Hi Team,
We have crawled SharePoint 2010 source in SharePoint 2013 and able to get results successfully. Now our requirement is to show Office Web Apps previes of 2010 documents in 2013 search results.
Any guidance on this please.
Thanks,
Manjeera

Hi,
Take a look at this blog post on how to do this: http://blogs.msdn.com/b/murads/archive/2012/10/11/utilizing-web-apps-2010-to-get-powerpoint-previews-of-sharepoint-2010-content-from-sharepoint-2013-search.aspx
Thanks,
Mikael Svenson
Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
http://techmikael.blogspot.com/
Author of Working with FAST Search Server 2010 for SharePoint

Why does using Google in the search bar (and only Google) not let me open search results in the same tab?

Hello,
When I use Google in the search bar, I have to open the search results in a new tab. If I simply click on them to open in the current tab, I'm inevitably redirected right back to the main Google site. This has only started happening in the past month or two -- I'm considering switching to Chrome after 5 years with Firefox because of this. Please help! It's incredibly frustrating to consistently have to remind myself to open all search results in a new tab. It's quite a waste of time over the course of a day.
Here are the basic steps:
1) I do a search using Google in the search bar.
2) As is supposed to happen, the search returns results in the current tab.
3) When I click on a result link, I'm immediately sent back to www.google.com.
4) If I hit back to try to return to the search results, I'm taken to the page that was loaded BEFORE I even did the search.
5) If, and only if, I instead right-click or Mouse3 click on the search results and open them in a new tab, I can successfully go to the search result pages.
--Thank you

Try to clear the Google cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

ADFS SSO and SharePoint 2013 on-premise Hybrid outbound search results from SharePoint Online - does it work?

Hi,
I want to setup an outpund hybrid search for SharePoint 2013 on-premise to SharePoint Online.
But I'm not shure if this works with ADFS SSO.
Has somebody experience with this setup?
Here's my guide which I'm going to use for this installation:
Introduction
In this post I'll show you how to get search results from your SharePoint Online in your SharePoint 2013 on-premise search center.
Requirements
User synchronisation ActiveDirectory to Office 365 with DirSync
DirSync password sync or ADFS SSO
SharePoint Online
SharePoint 2013 on-premise
Enterprise Search service
SharePoint Online Management Shell
Instructions
All configuration will be done either in the Search Administration of the Central Administration or in the PowerShell console of your on-premise SharePoint 2013 server.
Set up Sever to Server Trust
Export certificates
To create a server to server trust we need two certificates.
[certificate name].pfx: In order to replace the STS certificate, the certificate is needed in Personal Information Exchange (PFX) format including the private key.
[certificate name].cer: In order to set up a trust with Office 365 and Windows Azure ACS, the certificate is needed in CER Base64 format.
First launch the Internet Information Services (IIS) Manager
Select your SharePoint web server and double-click Server Certificates
In the Actions pane, click Create Self-Signed Certificate
Enter a name for the certificate and save it with OK
To export the new certificate in the Pfx format select it and click Export in the Actions pane
Fill the fields and click OK Export to: C:\[certificate
name].pfx Password: [password]
Also we need to export the certificate in the CER Base64 format. For that purpose make a right-click on the certificate select it and click on View...
Click the Details tab and then click Copy to File
On the Welcome to the Certificate Export Wizard page, click Next
On the Export Private Key page, click Next
On the Export File Format page, click Base-64 encoded X.509 (.CER), and then click Next.
As file name enter C:\[certificate
name].cer and then click Next
Finish the export
Import the new STS (SharePoint Token Service) certificate
Let's update the certificate on the STS. Configure and run the PowerShell script below on your SharePoint server.
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
$X64CertPath = "c:\[certificate name].cer"
# get the encrypted pfx certificate object
$PfxCert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# import it
Set-SPSecurityTokenServiceConfig -ImportSigningCertificate $PfxCert
Type Yes when prompted with the following message.
You are about to change the signing certificate for the Security Token Service. Changing the certificate to an invalid, inaccessible or non-existent certificate will cause your SharePoint installation to stop functioning. Refer
to the following article for instructions on how to change this certificate: http://go.microsoft.com/fwlink/?LinkID=178475. Are you
sure, you want to continue?
Restart IIS so STS picks up the new certificate.
& iisreset
& net stop SPTimerV4
& net start SPTimerV4
Now validate the certificate replacement by running several PowerShell commands and compare their outputs.
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
# get the encrypted pfx certificate object
New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# compare the output above with this output
(Get-SPSecurityTokenServiceConfig).LocalLoginProvider.SigningCertificate
[/code]
## Establish the server to server trust
[code lang="ps"]
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
Import-Module MSOnline
Import-Module MSOnlineExtended
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
$X64CertPath = "c:\[certificate name].cer"
# set the onpremise domain that you added to Office 365
$SPCN = "sharepoint.domain.com"
# your onpremise SharePoint site url
$SPSite="http://sharepoint"
# don't change this value
$SPOAppID="00000003-0000-0ff1-ce00-000000000000"
# get the encrypted pfx certificate object
$PfxCert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# get the raw data
$PfxCertBin = $PfxCert.GetRawCertData()
# create a new certificate object
$X64Cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2
# import the base 64 encoded certificate
$X64Cert.Import($X64CertPath)
# get the raw data
$X64CertBin = $X64Cert.GetRawCertData()
# save base 64 string in variable
$CredValue = [System.Convert]::ToBase64String($X64CertBin)
# connect to office 3656
Connect-MsolService
# register the on-premise STS as service principal in Office 365
# add a new service principal
New-MsolServicePrincipalCredential -AppPrincipalId $SPOAppID -Type asymmetric -Usage Verify -Value $CredValue
$MsolServicePrincipal = Get-MsolServicePrincipal -AppPrincipalId $SPOAppID
$SPServicePrincipalNames = $MsolServicePrincipal.ServicePrincipalNames
$SPServicePrincipalNames.Add("$SPOAppID/$SPCN")
Set-MsolServicePrincipal -AppPrincipalId $SPOAppID -ServicePrincipalNames $SPServicePrincipalNames
# get the online name identifier
$MsolCompanyInformationID = (Get-MsolCompanyInformation).ObjectID
$MsolServicePrincipalID = (Get-MsolServicePrincipal -ServicePrincipalName $SPOAppID).ObjectID
$MsolNameIdentifier = "$MsolServicePrincipalID@$MsolCompanyInformationID"
# establish the trust from on-premise with ACS (Azure Control Service)
# add a new authenticatio realm
$SPSite = Get-SPSite $SPSite
$SPAppPrincipal = Register-SPAppPrincipal -site $SPSite.rootweb -nameIdentifier $MsolNameIdentifier -displayName "SharePoint Online"
Set-SPAuthenticationRealm -realm $MsolServicePrincipalID
# register the ACS application proxy and token issuer
New-SPAzureAccessControlServiceApplicationProxy -Name "ACS" -MetadataServiceEndpointUri "https://accounts.accesscontrol.windows.net/metadata/json/1/" -DefaultProxyGroup
New-SPTrustedSecurityTokenIssuer -MetadataEndpoint "https://accounts.accesscontrol.windows.net/metadata/json/1/" -IsTrustBroker -Name "ACS"
Add a new result source
To get search results from SharePoint Online we have to add a new result source. Run the following script in a PowerShell ISE session on your SharePoint 2013 on-premise server. Don't forget to update the settings region
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
# region settings
$RemoteSharePointUrl = "http://[example].sharepoint.com"
$ResultSourceName = "SharePoint Online"
$QueryTransform = "{searchTerms}"
$Provier = "SharePoint-Remoteanbieter"
# region settings end
$SPEnterpriseSearchServiceApplication = Get-SPEnterpriseSearchServiceApplication
$FederationManager = New-Object Microsoft.Office.Server.Search.Administration.Query.FederationManager($SPEnterpriseSearchServiceApplication)
$SPEnterpriseSearchOwner = Get-SPEnterpriseSearchOwner -Level Ssa
$ResultSource = $FederationManager.GetSourceByName($ResultSourceName, $SPEnterpriseSearchOwner)
if(!$ResultSource){
Write-Host "Result source does not exist. Creating..."
$ResultSource = $FederationManager.CreateSource($SPEnterpriseSearchOwner)
$ResultSource.Name = $ResultSourceName
$ResultSource.ProviderId = $FederationManager.ListProviders()[$Provier].Id
$ResultSource.ConnectionUrlTemplate = $RemoteSharePointUrl
$ResultSource.CreateQueryTransform($QueryTransform)
$ResultSource.Commit()
Add a new query rule
In the Search Administration click on Query Rules
Select Local SharePoint as Result Source
Click New Query Rule
Enter a Rule name f.g. Search results from SharePoint Online
Expand the Context section
Under Query is performed on these sources click on Add Source
Select your SharePoint Online result source
In the Query Conditions section click on Remove Condition
In the Actions section click on Add Result Block
As title enter Results for "{subjectTerms}" from SharePoint Online
In the Search this Source dropdown select your SharePoint Online result source
Select 3 in the Items dropdown
Expand the Settings section and select "More" link goes to the following URL
In the box below enter this Url https://[example].sharepoint.com/search/pages/results.aspx?k={subjectTerms}
Select This block is always shown above core results and click the OK button
Save the new query rule

Hi Janik,
According to your description, my understanding is that you want to display hybrid search results in SharePoint Server 2013.
For achieving your demand, please have a look at the article:
http://technet.microsoft.com/en-us/library/dn197173(v=office.15).aspx
If you are using single sign-on (SSO) authentication, it is important to test hybrid Search functionality by using federated user accounts. Native Office 365 user accounts and Active Directory Domain Services
(AD DS) accounts that are not federated are not recognized by both directory services. Therefore, they cannot authenticate using SSO, and cannot be granted permissions to resources in both deployments. For more information, see Accounts
needed for hybrid configuration and testing.
Best Regards,
Eric
Eric Tao
TechNet Community Support

The way SharePoint open office documents will differ if the user try to open them from the document library directly, or if users try to open the document from the search result page.

I have a document library where I have uploaded an excel sheet to it. Now If I click on the excel sheet directly from the document library page , I will get the following error ““The webpage cannot be displayed””. While if I do a search and I open the excel
sheet from the search result page , it will open the excel sheet using the excel services inside the browser !!.
So can anyone advice on this ?
Also if I have a PowerPoint document , and I try to open it from the document library I will get the following error “The webpage cannot be displayed” , and the URL will be prefix with the following “ms-powerpoint:ofv|u|”. while if i do a search and i open
the PowerPoint from the search result page i will be prompted to either open or save the document ? So why SharePoint is reacting totally different when trying to open document library items from the document library Or from the search result page?

Hi,
The behavior in the document library could be probably because of the Documents handling setting. Please try setting it to default behavior (Open in browser) as i hear from you that the default behavior is to open from browser.
Thanks, Suneetha
Currently I have set the following;-
1. On the library advance setting :- I define “Open in the client application”
2. On the web application setting:- I define stricked for Browser File Handling
And I have noted if I delete the browser cache and I access the document , then I will be prompted with the download dialog. but if I re-click on the same document I will be redirected to the
The webpage cannot be displayed
And the ms-powerpoint:ofv|u| will be added to the beginning of the URL. So could this be a caching problem ?

How do I get Firefox 12 to open a link from Google search results?

Ever since upgrading to version 12.0, whenever I click on certain links the browser just "reloads" the same page I am on rather than loading the new page in the same tab. When this happens it's not opening the link in a new tab or window, instead just for a second the tab I am on says "connecting" and has the circular busy indicator, and then I'm right where I was before. In order actually follow a link I'm having to context click and then click Open in a new Tab.
On a lot of websites the links follow as usual and open the new page in the same tab. Others don't however, such as the search results page from google. I'm wondering if this is something to do with the new anti-duplicate tab feature, and if so, how do I disable that? I'm on OSX 10.6.8. Thanks.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

Firefox won't load google image search results

Firefox won't load google search results. It will load the page of results with the thumbnails etc. but if you click any of them, just a loading spinning icon appears on the tab and it never loads.
I have tried:
Both logged in and out of google account,
All other areas of google work with no problems (news, shopping etc.),
Site working perfectly in Internet Explorer,
Running firefox in safemode,
Manually disabling all plugins and addons,
Clearing the cache and cookies,
Opening results in new tab just results in white page with web address but it never loads,
Restarting both my PC and router.
It's not been working for at least the past 6 hours. Last time I used it was about a week ago and it was working fine then. I've not noticed any problems on any other sites this week that I can recall.

Updating firefox to version 17.0 appears to have solved this.

Caching search results required

Similar Messages

Maybe you are looking for