CAD Desktop - DMS Integration

Hi,
We wish to integrate CAD desktop with DMS. Could you share the integration aspects that need to be considered for parameter mapping for the sa,e?

Hi Sandeep,
Do explore this link for more info.Hope it comes handy.
http://www.scribd.com/doc/14023686/PLM-CAD-DMS-Integration-Points
Regards,
Pradeepkumar H.

Similar Messages

BAdIs for CAD Desktop Integration

Hi, I am generally looking for some information on the purpose and use of the BAdIs related to CAD Desktop Integration. The name of the BAdIs are:-
CDESK_BADI_MAIN
CDESK_CAD_CHANGE
CDESK_TBM_ADDIN
CDESK_BADI_COPY_DLG
CDESK_BADI_COPY_DOC
CDESK_MATERIAL
CDESK_BOM
Anyone one who has worked on the above BAdIs please provide your valuable inputs. are all these BAdIs related to the CDESK transaction.

Hi Rudra,
Maybe SAP note
600142 DESK: List of all BAdIs/BAdI methods in CAD desktop
could help you. This note contains a whole list of all CAD Desktop BADIs currently available.
Best regards,
Christoph

CAD Desktop - error while checking in and storing...

Hello SAP gurus',
We have one problem regarding the CAD Desktop functionality, and we believe that you could help us!
We are doing some tests with CAD-SAP Integration, and when we try to check in document in CAD Desktop, we receive the following error: "Error while checking in and storing c:\...".
Funny thing is that we can check in originals "manually" in SAP GUI when we open DIR, but when we try to check it in via CAD Desktop it is not possible.
In some previous posts I have seen that "hosts" file should be maintained properly, but what bothers me is that we are not using real content server yet (we are still in a test phase and we are checking in documents directly to SAP database).
Does anybody have some idea what could cause this problem?
Thanks for help guys!
Regards,
Karlo

Hi,
For viewing the CAD files Content sever will support. The exact technical stuff I don't know.But as per the previous experience I am sure that if you install k-pro your purpose will get fulfilled. The content server feathures you can get and may know the reason.
But once you install a separate content server instead of the current storage system, your problem will get resolved.
Regards,
Ravindra

CAD Desktop Queries

Hi All,
Currently we are using CAD desktop alongwith DMS. We need to replace a selected component in the document based structure with a new component. We are trying to use the copy and replace option in the CAD view, but the new component selected is not getting loaded.Could anyone let know what else we need to do to get it going?

Hi Lisbeth,
See if the following conditions have been met with:
- In Customizing for CAD Desktop (CA-CAD) you have set the CDESK_REPLACE_COMPONENT (replace component) parameter.
- You are in the CAD view or the CAD worklist.
Regards,
Pradeepkumar Haragoldavar

CAD Desktop or Integrators ?

Is it recommended to go for CAD desktop or to go for Individual connectors for CAD integration for AutoCAD,Inventer,Solid Works,Solid Edge etc ?
Kindly Let me know.
Thanks

Go to
<a href="http://service.sap.com/plm">http://service.sap.com/plm</a>
Life-Cycle Process Support -> Product Development -> Integration -> MCAD Integration
and select the CAD System you are looking for.

CAD desktop files export

Hello,
We have setup CAD desktop in our landscape for editing CAD documents both from SAP as well CAD environment. Now what we wanted to do is to share documents with our suppliers to help them plan for procurement of new materials(based on new products that we design in CAD). Searched for some standard solution,its not available. Is it possible to send it/export to DMS/cfolders?Share your inputs.

You can export an assembly from CAD desktop, including the linked materials and material BOMs, to a cFolders system. The system also exports all the originals linked to the document info records.
For more information, see SAP Note 828084. Export/Import from c-folders to DMS is also a functionality you may wish to explore to fulfil your requirements.
Regards,
Pradeepkumar Haragoldavar

Spro Settings for CAD Desktop

Hi Experts,
Can you please guide me what spro settings needs to be done for implementing CAD Desktop. I have gone through the SAP Library notes but still confused regarding the IMPLICATIONS of the fields under CAD Systems in spro like Group Maintenance, Applications, Parameters etc.. What are their implications and what settings need to be done?
If any of you have got SAP notes on the Implementation and Spro settings for CAD documents, Please forward me.
Thanks a lot in advance....

Hi,
for CAD Integration you also need the plug-ins for the CAD Systems. In the installation-guides for the plug-ins you also find the required settings for the CDESK customizing. In addition a lot of information - especially about the parameters - can be found in the notes (service.sap.com/notes).
More info on the plug-ins: http://wiki.sdn.sap.com/wiki/display/PLM/CADIntegrationin+PLM
Best regards,
Martin

Desktop Office Integration in ITS

I'm in a situation where I need to use "Desktop Office Integration" (DOI) in the ITS. But DOI is only supported in WinGUI. So I'm looking for a workaround.
My case is that I'm using the LinkServer in DMS, so that some metadata is linked direct from the Word document and updated whenever the user opens the document.
The LinkServer is available as a part of WinGUI and the ITS doesn't contain a workaround.
Am I the only one banging ny head on the wall in this issue?

Hello,
The final solution was to create an RFC server application in .NET that receives the office document, saves it to disk, opens the document with the relevant Office application through automation. And also updates the fields in the document. Saved the document to disk again and sendt it back to SAP.
Br,
Thomas Mouritsen

Need help with Desktop Office Integration (DOI)

Hi all,
i need help to read an Excelsheet into an int. table.
Its the first time, that i use the SAP DOI. I copy different coding into my Report to get connection to an existing Excelsheet.
Here is my Coding:
* first get the SAP DOI i_oi_container_control interface
CALL METHOD c_oi_container_control_creator=>get_container_control
                    IMPORTING control = gr_control
                              error   = gr_errors.
APPEND gr_errors.
* create a control container as defined in dynpro 100
CREATE OBJECT gr_container
            EXPORTING container_name = 'CONTAINER'.
* initialize the SAP DOI Container, tell it to run in the container
* specified above and tell it to run Excel in-place
CALL METHOD gr_control->init_control
    EXPORTING
      r3_application_name      =    'Data'
      inplace_enabled          = ' '
      inplace_scroll_documents = 'X'
      parent                   = gr_container
      register_on_close_event = 'X'
      register_on_custom_event = 'X'
      no_flush                 = 'X'
    IMPORTING
      error                    = gr_errors.
* save error object in collection
APPEND gr_errors.
* ask the SAP DOI container for a i_oi_document_proxy for Excel
CALL METHOD gr_control->get_document_proxy
                       EXPORTING document_type = 'Excel.Sheet'
*                       EXPORTING document_type = 'Word.Document'
                                no_flush = 'X'
*                                REGISTER_CONTAINER = 'X'
                      IMPORTING document_proxy = gr_document
                                error          = gr_errors.
APPEND gr_errors.
Then i open the Document from lokal PC.
CALL METHOD gr_document->open_document
      EXPORTING
*      document_title   = ld_filenc
        document_url     = ld_verzc
*      NO_FLUSH         = ' '
*      OPEN_INPLACE     = ' '
*      open_readonly    = ' '
*      PROTECT_DOCUMENT = ' '
*      STARTUP_MACRO    = ''
*      USER_INFO        =
*      ONSAVE_MACRO     =
      IMPORTING
        error            = gr_errors
*      RETCODE          =
APPEND gr_errors.
Now i start the spreadsheet interface:
*...check if our document proxy can serve a spreadsheet interface data:
DATA: pd_has TYPE i.
CALL METHOD gr_document->has_spreadsheet_interface
                    EXPORTING no_flush = 'X'
                    IMPORTING is_available = pd_has
                              error = gr_errors.
APPEND gr_errors.
CALL METHOD gr_document->get_spreadsheet_interface
                    EXPORTING no_flush = ' '
                    IMPORTING
                              sheet_interface = gr_spreadsheet
                              error = gr_errors.
APPEND gr_errors.
* now loop through error collection because
* Get_spreadsheet_interface flushed and synchronized
* the automation queue !
LOOP AT gr_errors.
    CALL METHOD gr_errors->raise_message
                    EXPORTING type     = 'I'
                    EXCEPTIONS message_raised = 1
                               OTHERS         = 2.
    IF sy-subrc = 1.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      pd_kz_fehler = 'X'.
      EXIT.
    ENDIF.
ENDLOOP.
FREE gr_errors.
Ok, now i can open a Excelsheet, and i can mark a range in the sheet
rows is a constant.
CALL METHOD gr_spreadsheet->set_selection
      EXPORTING
        left     = 1
        top      = 2
        rows     = rows
        columns = 18
*    NO_FLUSH = ' '
*    UPDATING = -1
    IMPORTING
      error    = gr_errors
*    RETCODE =
my first problem: Excel is really open, and the user can see the sheet. I dont want, that excel is visible...is there a way to start excel in no_visible mode?
second problem: The sheet have makro aktiv...at start from excel, there is a popup, which ask 'makros activate' oder not activate... i dont want this popup... is there a way, to say it from abap, that makros always active?
third problem: i see, that the content Table have this components:
TYPES: BEGIN OF SOI_GENERIC_ITEM,
         ROW(4) TYPE C,
         COLUMN(4) TYPE C,
         VALUE(256) TYPE C,
       END OF SOI_GENERIC_ITEM.
But my excelsheet have more then 10000 lines....
forth (and biggest) problem: i need the selected data into an int. tabelle. The table have the components:
ROW
COL
VALUE
i dont know, how can i do this...
please help me
Sorry for my bad english.
Greetings
Markus

Hi,
May be this link is useful
/people/thomas.jung3/blog/2005/05/11/using-classic-activex-controls-in-the-abap-control-framework
Also Check out report SAPRDEMOEXCELINTEGRATION2.
check the links
http://www.esnips.com/doc/741a848e-f49a-4436-bec4-e21950f6c94c/desktop-office-integration.pdf
http://www.esnips.com/doc/2080a9ec-64f9-49c4-bd03-d9f56bc2437c/MSWord--Excel-with-ABAP.pdf
Regards,
Raj.

Desktop Office Integration - How to use Weblinks for Images in linkserver?

Hello experts,
I want to add an image from the internet (e.g. Link: www.images.de/image.jpeg) to the linkserver in order to paste it in my word document. As I know it should be possible to do so with the link server. I tried it before with business documents "BDS" and it works fine. But in my opinion this place is not the best place to store pictures. So I want to use the pictures, which are currently stored in our portal and are available via weblink.
So, actually, I have to give the information about the link to the link server method "add_binary_item", but with something like that "http://www......" it doesnt work! Do I have to enter a prefix or something like this???
I hope someone could help me with that issue.
THanks and regards,
marcus

Hello,
I did it and it works fine!
But I had to use the BDS Business Document Service with Class cl_bds_document_set.
So I used the method "get_with_url" to get the url from the document/picture.
After that I cann add a binary item with the URL and it works fine if my pictures are stored in BDS.
But that is not what I want to do. I want to store the pictures in my mime repository for example. Are there any other possibilities to do that? Or is Desktop Office Integrations supporting just documents/pictures which are stored in BDS???
Regards, Marcus
Edited...........................................................
In best case I am able to user internet urls for the pictures. So "http://www.xcxy.de/picture.jpeg", but with this URL information it doesn´t work!
So, my question is if I have to add a prefix or something like this in order to use weblinks.
Edited by: Marcus Findeisen on Apr 19, 2011 9:16 AM

Desktop Office Integration in SAP GUI for HTML - dont works?

Hello all,
my program reads an Excel-File with multiple Worksheets into SAP by using class:
CL_GUI_CUSTOM_CONTAINER
and intefaces:
I_OI_CONTAINER_CONTROL,
I_OI_DOCUMENT_PROXY AND
I_OI_SPREADSHEET.
All works fine, but when I integrated the SAP Transaction into our Portal and using the Program through the WEBGUI it dont works.
It looks like that he can't create a container Control, to open the File in Background in Excel.
I worked with Desktop Office Integration to read all Worksheets into SAP, like here:
http://abap-explorer.blogspot.com/2008/12/upload-data-from-multiple-worksheets-of.html
Is there any solution to solve my problem?
it returns me this message
"Cannot initialize control"
It seems that the error comes from this Method in Webgui:
Data iref_document    type ref to i_oi_document_proxy.
call method iref_document->open_document
    exporting
      document_title = 'Excel'
      document_url   = v_document_url
      open_inplace   = 'X'
    importing
      error          = iref_error.
if iref_error->has_failed = 'X'.
    call method iref_error->raise_message
      exporting
        type = 'I'.
    leave list-processing.
    exit.
endif.
I hope someone can help me.
Thanks.
EDIT:
Today I tested the ABAP Report SAPRDEMOOFFICEINTEGRATION in our webgui
it returns me this error:
     In dem Programm "C_OI_CONTAINER_CONTROL_CREATORCP" wurde durch eine
      RAISE-Anweisung die Exception
     (Ausnahmebedingung) "JAVABEANNOTSUPPORTED" ausgelöst.
     Da die Exception nicht durch ein in der Aufrufhierarchie
Auslösestelle des Laufzeitfehlers
     Programm                                 C_OI_CONTAINER_CONTROL_CREATORCP
     Include                                  OFFICEINTEGRATIONDCCIMP
     Zeile                                    70
     Modultyp                                 (METHOD)
     Modulname                                I_OI_CONTAINER_CONTROL~INIT_CONTROL
Edited by: Sascha Baumann on Jul 15, 2009 9:18 AM
Edited by: Sascha Baumann on Jul 16, 2009 8:04 AM

Hi Sascha,
I have the same issue as yours.
Did you find a way to open your excel file in the WebGui?
Regards,

Extend search in cad-desktop view document list

Hi,
is it possible to extend the search in the cad desktop's view DOCUMENT LIST?
when i click the button SEARCH i get to some kind of CV04N-Search. Is it possible to implement a new Tab? i want to search by a change service order and select all documents which are attached to the order's materials.
thanks
Sven

is there no chance to do this?
another approach would be to insert a new "search"-button to the menu in this view. but i found no way to clear the document list and insert new lines.
any help would be nice.
thanks
Sven

Customizing the CAD-Desktop

Hello Guru,
I just want to ask you, if it's possible to integrate a button on the CAD-Desktop or at least in the transaction mm02, cl02 ...
Because I'm gone need to call an external program using some kind of server path, but to do this I need some information.
like e.g. I'll need a "classname" to call a certain specific path.
ps. I hope that my explanations are sufficient.
Best Regards,
Kais

Hi Gerhard,
have u put
EXP_MARA-BRGEW           Gross weight
EXP_MARA-NTGEW            Net weight
from Inv side in config...
Also check in cdesk_cus under create material
<b>Base Unit of Measure               Constant     ST
Net Weight               File Attribute     Physical_Properties_MassValue</b>
hope this helps

Question to CAD Desktop - Feature Copy and Replace

Hello,
I want two use the feature "copy and replace" in CAD Desktop to copy and replace the document info set with a new one but also change its document info set type.
Is that in general possible, how to customize it?
Kind regards,
Axel Tackenberg

Hi,
here the link to the docu:
http://help.sap.com/erp2005_ehp_04/helpdata/en/ea/56e93ba948ca1ee10000000a114084/frameset.htm -> Processing of doscuments - > Copy and Replace.
Best regards,
Martin

Uses of cad desktop

Hi Gurus
Iam confused about the uses of cad desktop.
I think most of the functions like model/part checkin-out, dir creation, matl creation and bom creation are available in the cad interface itself.
So i want to know what are the additional advantages we can get with cad desktop apart from the above.
Best Regards
Prasad K

Hi prasad,
Go thru below link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/e6/56e93ba948ca1ee10000000a114084/content.htm.
Thanks,
Swamy H P

CAD Desktop - DMS Integration

Similar Messages

Maybe you are looking for