CAD Desktop Queries
Hi All,
Currently we are using CAD desktop alongwith DMS. We need to replace a selected component in the document based structure with a new component. We are trying to use the copy and replace option in the CAD view, but the new component selected is not getting loaded.Could anyone let know what else we need to do to get it going?
Hi Lisbeth,
See if the following conditions have been met with:
- In Customizing for CAD Desktop (CA-CAD) you have set the CDESK_REPLACE_COMPONENT (replace component) parameter.
- You are in the CAD view or the CAD worklist.
Regards,
Pradeepkumar Haragoldavar
Similar Messages
-
CAD Desktop - error while checking in and storing...
Hello SAP gurus',
We have one problem regarding the CAD Desktop functionality, and we believe that you could help us!
We are doing some tests with CAD-SAP Integration, and when we try to check in document in CAD Desktop, we receive the following error: "Error while checking in and storing c:\...".
Funny thing is that we can check in originals "manually" in SAP GUI when we open DIR, but when we try to check it in via CAD Desktop it is not possible.
In some previous posts I have seen that "hosts" file should be maintained properly, but what bothers me is that we are not using real content server yet (we are still in a test phase and we are checking in documents directly to SAP database).
Does anybody have some idea what could cause this problem?
Thanks for help guys!
Regards,
KarloHi,
For viewing the CAD files Content sever will support. The exact technical stuff I don't know.But as per the previous experience I am sure that if you install k-pro your purpose will get fulfilled. The content server feathures you can get and may know the reason.
But once you install a separate content server instead of the current storage system, your problem will get resolved.
Regards,
Ravindra -
Extend search in cad-desktop view document list
Hi,
is it possible to extend the search in the cad desktop's view DOCUMENT LIST?
when i click the button SEARCH i get to some kind of CV04N-Search. Is it possible to implement a new Tab? i want to search by a change service order and select all documents which are attached to the order's materials.
thanks
Svenis there no chance to do this?
another approach would be to insert a new "search"-button to the menu in this view. but i found no way to clear the document list and insert new lines.
any help would be nice.
thanks
Sven -
Hello Guru,
I just want to ask you, if it's possible to integrate a button on the CAD-Desktop or at least in the transaction mm02, cl02 ...
Because I'm gone need to call an external program using some kind of server path, but to do this I need some information.
like e.g. I'll need a "classname" to call a certain specific path.
ps. I hope that my explanations are sufficient.
Best Regards,
KaisHi Gerhard,
have u put
EXP_MARA-BRGEW Gross weight
EXP_MARA-NTGEW Net weight
from Inv side in config...
Also check in cdesk_cus under create material
<b>Base Unit of Measure Constant ST
Net Weight File Attribute Physical_Properties_MassValue</b>
hope this helps -
BAdIs for CAD Desktop Integration
Hi, I am generally looking for some information on the purpose and use of the BAdIs related to CAD Desktop Integration. The name of the BAdIs are:-
CDESK_BADI_MAIN
CDESK_CAD_CHANGE
CDESK_TBM_ADDIN
CDESK_BADI_COPY_DLG
CDESK_BADI_COPY_DOC
CDESK_MATERIAL
CDESK_BOM
Anyone one who has worked on the above BAdIs please provide your valuable inputs. are all these BAdIs related to the CDESK transaction.Hi Rudra,
Maybe SAP note
600142 DESK: List of all BAdIs/BAdI methods in CAD desktop
could help you. This note contains a whole list of all CAD Desktop BADIs currently available.
Best regards,
Christoph -
Question to CAD Desktop - Feature Copy and Replace
Hello,
I want two use the feature "copy and replace" in CAD Desktop to copy and replace the document info set with a new one but also change its document info set type.
Is that in general possible, how to customize it?
Kind regards,
Axel TackenbergHi,
here the link to the docu:
http://help.sap.com/erp2005_ehp_04/helpdata/en/ea/56e93ba948ca1ee10000000a114084/frameset.htm -> Processing of doscuments - > Copy and Replace.
Best regards,
Martin -
Hi Gurus
Iam confused about the uses of cad desktop.
I think most of the functions like model/part checkin-out, dir creation, matl creation and bom creation are available in the cad interface itself.
So i want to know what are the additional advantages we can get with cad desktop apart from the above.
Best Regards
Prasad KHi prasad,
Go thru below link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/e6/56e93ba948ca1ee10000000a114084/content.htm.
Thanks,
Swamy H P -
Testing CAD-Desktop interface with CAD-system
Hi,
does anybody know if it is possible to get a CAD-system for free to test the CAD-Desktop interface of SAP?
I am not a key CAD user, I just want to look how CAD Desktop works.
Regards,
OliverYou do not need CAD system to work with CAD Desktop
call transaction SE37
In Function module enter : CDESK_SHOW
or CDESK_TEST
Fill the import paramenters
Execute it
CAD Desktop will appear -
CAD - Desktop Monitoring Console
Hi All,
We are tried to monitor the CAD server using "CAD Desktop Monitoring Console" .
We configured the snmp community "public" & restart the snmp service as mentioned in the CAD installation guide.
I am getting the snmp timeout error while accessing the console.Please help on this.
Thanks in Advance !!!I also had a look at installation guide for CAD 8.5,
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/cad_enterprise/cadenterprise8_5/installation/guide/cad85cceig.pdf
if you look at page 139, it says how to configure Desktop Monitoring Console and only covers windows SNMP.
but if you take a look at guide for CAD 10.0
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/cad_enterprise/cadenterprise10_0/installation/guide/cad100cceig.pdf
page 148 shows how to configure Desktop monitoring console, and there they have separately mentioned Cisco SNMP configuration.
so lets try to make it work with cisco SNMP. please follow this steps and see if it works.
1) on the both side of CAD server, got to Run and type mmc.exe if you are using 64 bit OS, you have to run mmc.exe /32
a console will pop up with console root
2) go to file --> add/remove snap-in
3)in the snap in click on ADD button and from list of snap ins add Cisco SNMP Agent Management.
once you add successfully, click ok and
now in your console root, you will be able to see Cisco SNMP managemnet agent.
4) explore agent by clicking + sign and under community names right click and go to properties
5) click add new community , under community name give public (case sensitive all small) and select SNMP version as v2c and access rights as read only.
6) go to CAD postinstall.exe and under SNMP configuration, add at least one trap destination.
7) restart Cisco SNMP management service.
open your browser and check if console is working or not. and rate post if helps.
regards
Chintan -
CAD Desktop or Integrators ?
Is it recommended to go for CAD desktop or to go for Individual connectors for CAD integration for AutoCAD,Inventer,Solid Works,Solid Edge etc ?
Kindly Let me know.
ThanksGo to
<a href="http://service.sap.com/plm">http://service.sap.com/plm</a>
Life-Cycle Process Support -> Product Development -> Integration -> MCAD Integration
and select the CAD System you are looking for. -
Hi,
We wish to integrate CAD desktop with DMS. Could you share the integration aspects that need to be considered for parameter mapping for the sa,e?Hi Sandeep,
Do explore this link for more info.Hope it comes handy.
http://www.scribd.com/doc/14023686/PLM-CAD-DMS-Integration-Points
Regards,
Pradeepkumar H. -
Hello,
We have setup CAD desktop in our landscape for editing CAD documents both from SAP as well CAD environment. Now what we wanted to do is to share documents with our suppliers to help them plan for procurement of new materials(based on new products that we design in CAD). Searched for some standard solution,its not available. Is it possible to send it/export to DMS/cfolders?Share your inputs.You can export an assembly from CAD desktop, including the linked materials and material BOMs, to a cFolders system. The system also exports all the originals linked to the document info records.
For more information, see SAP Note 828084. Export/Import from c-folders to DMS is also a functionality you may wish to explore to fulfil your requirements.
Regards,
Pradeepkumar Haragoldavar -
Concepts Management in CAD DESKTOP
Hi friends,
I have a question concerning NPDI for which I am trying to find solution in SAP. Scenario is:
Initially design team works on 3 concepts in CAD and checks into SAP PLM through CAD Desktop so that reviewer and approver team checks out data from central content server. DIRu2019s were created before check in and say one concept assembly has 10 parts then approx some 20-25 components(assuming some parts in common) have been checked in . This will result in 20-25 DIRu2019s.
One concept is finalized by review/approver team and at this stage; Part numbers are assigned to the assembly and its parts. I will rename the assembly and parts as per the numbers generated from the Number Generation System (External to SAP) and continue with the frozen concept for detail designing.
We have selected only one concept out of 3 and this has resulted in consumption of say some 10-15 DIRu2019s extra DIR numbers which are not been used and are waste now. If this continuous in all new developments, lots of DIR numbers are consumed which are not being used.
Can any solution in SAP address this scenario? I have to check in all concepts so that review team will look into it but I donu2019t want DIR to get generated and I guess this is not possible.
Awaiting for your replies,
Rgds,
SudharshanHello Sudarshan,
Its perfectly okay to create DIR's for all the parts and designs from the 3 different concepts. The key here is that you are saving all the ideas generated in the concept phase and not only the approved idea. This is a good practice as all the hardwork and equally good ideas that made it to review phase are being saved and can be useful for historic purposes or in future if you want to revisit the unapproved ideas and improvise them you still have them safely stored in your DIR. DIR numbers are expendable but not the hardwork and other great ideas (though these didn't make it to final design)
You number range should be in the order of 6-7 digits.
regards,
N K -
Hi Experts,
Can you please guide me what spro settings needs to be done for implementing CAD Desktop. I have gone through the SAP Library notes but still confused regarding the IMPLICATIONS of the fields under CAD Systems in spro like Group Maintenance, Applications, Parameters etc.. What are their implications and what settings need to be done?
If any of you have got SAP notes on the Implementation and Spro settings for CAD documents, Please forward me.
Thanks a lot in advance....Hi,
for CAD Integration you also need the plug-ins for the CAD Systems. In the installation-guides for the plug-ins you also find the required settings for the CDESK customizing. In addition a lot of information - especially about the parameters - can be found in the notes (service.sap.com/notes).
More info on the plug-ins: http://wiki.sdn.sap.com/wiki/display/PLM/CADIntegrationin+PLM
Best regards,
Martin -
CAD desktop license username and password
Hi
I am trying to generate licencse for CAD -IPCC Enterprize 6.0 using the url given in CAD installation guide.
http://209.46.83.138/sws/ciscoLicense/LicenseRegister.html
when the login/password windows pops up it does not accept my CCO ID username/password.
Now I have a doubt if CCO user ID should be used to generate the CAD license.
Could I get some help on this .
regards
ChinmayHi ,
Thanks for the reply.
I am just worried coz I did not get any login with the CAD desktop.
Is that it comes default or we have to mail [email protected] and get it seperatly.
regards
Chinmay
Maybe you are looking for
-
Can 2 people share itunes? and not transfer each other's music?
Can someone help? I have an ipod as well as my boyfriend. We are both using itunes on the same PC and if I plug in my ipod, I get all his music and vice versa. How can I just transfer the music that I want and not the entire library?? Do we have to s
-
Password Issues with Charter Mail Account
Hi, I am setting up my new iPad Wi-Fi 4G with my email accounts for Charter. With this I have run into the following issue: -email accounts with only alpha or only numeric passwords work fine. -email accounts with a alpha/numeric passwords will not w
-
Journal payment to Vendor (Account payable)
Hi, I'd like to know the transaction to view the reports "Journal payment to Vendor Account" and "Journal receipt to Vendor Account". Thanks a lot!
-
Any idea how I can up,oad images from an Aperture library to iCloud storage? So far I've managed to get some photos to transfer by selecting jPegs and then dragging to the iCloud window. But, apart from being incredibly slow, all I get is a few (up t
-
Applying stylesheet to XMLType using SQL operator
How can I apply a stylesheet to a XMLType in the database using a SQL query? I am using Oracle 9i Release 2. I have seen it referenced in many different PDF's from Oracle but haven't seen any code examples. Any help would be very appreciated! Best re