CAD Indicator (MARA-CADKZ) in Material Master
Hi Experts,
In the Material Master Basic Data2, we have CAD Indicator. That field is in display mode, inspite of Optional Entry maintained in the field selection group corresponding to its field reference.
Can you please let's know, whether this can be made as input field and can be maintained in the Material Master creation / it should always be updated by CAD Interface only and not possible to have maintain manually.
Our client is not having CAD Interface, but would like to use this field for bi-furcating materials into two groups based on the input in this indicator
Thank you,
Best Regards,
Ramakrishna Mangena
there is no way to set this flag outside the maintaince from
CAD-Desktop. [PDM CAD-interface]
Sorry to give you a not more positive answer in this case.
Similar Messages
-
I want to delete the originals of document while changing the status of document based on CAD indicator status. For this I have implemented BADI DOCUMENT_STATUS01 and the method AFTER_CHANGE_STATUS. From this, the BADI is triggering whenever I am changing the document status and I can able to delete the originals. But here my requirement is to check the CAD indicator status to delete those originals. I.e. whenever the document status will change first time the CAD indicator status will also change. Based on that old and new status of CAD indicator I have to do delete operation.
If anybody has an idea about SAP documents please help me
Thank you,
Regards,
RameshFirst the document is exists in SAP in FR status. But when the CAD system will connect to SAP then the status is changing from ‘FR’ to ‘IN’ after that the CAD Indicator is populating from Blank to ‘X’.
I want to know in which place the CAD indicator value is changing (any user exits available or any BADI s available when changing the CAD indicator) when connected to CAD system. -
HI, we need the field description for the following tables in SAP...
MAKT
MARA
MARD
MAST
MVER
MVKE
MARC
Edited by: Tutika Kumar on Nov 24, 2009 9:39 AMHI
Tables used to store the field values for Material Master
General Material Data MARA
Material Descriptions MAKT
Plant Data for Material MARC
Material Valuation MBEW
Storage Location Data for Material MARD
Units of Measure for Material MARM
Sales Data for Material MVKE
Forecast Parameters MPOP
Planning Data MPGD_MASS
Tax Classification for Material MLAN
Material Data for Each Warehouse Number MLGN
Material Data for Each Storage Type MLGT
Fields with field description
DF client level MARA-LVORM
Material Group MARA-MATKL
Old matl number MARA-BISMT
Base Unit MARA-MEINS
Order Unit MARA-BSTME
Document MARA-ZEINR
Document type MARA-ZEIAR
Doc. Version MARA-ZEIVR
Page format (MARA-ZE MARA-ZEIFO
Doc. change no. MARA-AESZN
Page number MARA-BLATT
No. of sheets MARA-BLANZ
Prod./insp.memo MARA-FERTH
Page format (MARA-FO MARA-FORMT
Size/dimensions MARA-GROES
Basic material MARA-WRKST
Ind. Std Desc. MARA-NORMT
Lab/Office MARA-LABOR
Purch.value key MARA-EKWSL
Gross Weight (MARA-B MARA-BRGEW
Net Weight MARA-NTGEW
Weight unit (MARA-GE MARA-GEWEI
Volume (MARA-VOLUM) MARA-VOLUM
Volume unit (MARA-VO MARA-VOLEH
Container MARA-BEHVO
Stor.conditions MARA-RAUBE
Temperature MARA-TEMPB
Trans. Group MARA-TRAGR
Haz. matl no. MARA-STOFF
Division MARA-SPART
Competitor MARA-KUNNR
GR slips quantity MARA-WESCH
Procure. rule MARA-BWVOR
Supply source (MARA- MARA-BWSCL
Season MARA-SAISO
Label type MARA-ETIAR
Label form MARA-ETIFO
EAN/UPC (MARA-EAN11) MARA-EAN11
EAN Category (MARA-N MARA-NUMTP
Length (MARA-LAENG) MARA-LAENG
Width (MARA-BREIT) MARA-BREIT
Height (MARA-HOEHE) MARA-HOEHE
Unit (MARA-MEABM) MARA-MEABM
Prod.hierarchy (MARA MARA-PRDHA
CAD Indicator MARA-CADKZ
QM procurement MARA-QMPUR
Allowed pkg wt MARA-ERGEW
Unit of weight MARA-ERGEI
Allowed volume MARA-ERVOL
Volume unit (MARA-ER MARA-ERVOE
Excess wt tolerance MARA-GEWTO
Excess volume tol. MARA-VOLTO
Var. Order Unit MARA-VABME
Configurable MARA-KZKFG
BatchManagement (MAR MARA-XCHPF
Packag.mat.type MARA-VHART
Maximum level MARA-FUELG
Stacking factor MARA-STFAK
Matl Grp Pckmat MARA-MAGRV
AuthorizGroup MARA-BEGRU
Ext. Matl Group MARA-EXTWG
X-plant status MARA-MSTAE
X-DChain status MARA-MSTAV
Valid from (MARA-MST MARA-MSTDE
Valid from (MARA-MST MARA-MSTDV
Catalog profile MARA-RBNRM
Rem. Shelf Life MARA-MHDRZ
Tot. shelf life MARA-MHDHB
Storage % MARA-MHDLP
Envt. relevant MARA-KZUMW
Prod.allocation MARA-KOSCH
Disc. in kind MARA-NRFHG
Mfr Part Number MARA-MFRPN
Manufacturer MARA-MFRNR
Int. material no. MARA-BMATN
Mfr Part Profile MARA-MPROF
DGIndProfile MARA-PROFL
Highly viscous MARA-IHIVI
In bulk/liquid MARA-ILOOS
Closed MARA-KZGVH
Batch rec. req. MARA-XGCHP
Assign.eff.vals MARA-KZEFF
Comp. Level MARA-COMPL
Period Ind. (MARA-IP MARA-IPRKZ
Rounding rule MARA-RDMHD
ProdComposition MARA-PRZUS
GenItemCatGroup MARA-MTPOS_MARA
Material locked MARA-MATFI
Ref. mat. for pckg MARA-RMATP
GDS-Relevant MARA-GDS_RELEVANT
Origin Accept. MARA-WEORA
Description (MAKT-MA MAKT-MAKTX
DF plant level MARC-LVORM
P-S matl status MARC-MMSTA
Valid from (MARC-MMS MARC-MMSTD
ABC Indicator MARC-MAABC
Critical Part MARC-KZKRI
Purch. Group MARC-EKGRP
Unit of issue MARC-AUSME
MRP profile MARC-DISPR
MRP Type MARC-DISMM
MRP Controller MARC-DISPO
Pl. Deliv. Time MARC-PLIFZ
GR Proc. Time MARC-WEBAZ
Period Ind. (MARC-PE MARC-PERKZ
Assembly scrap MARC-AUSSS
Lot size MARC-DISLS
Procurement MARC-BESKZ
SpecProcurement MARC-SOBSL
Reorder Point MARC-MINBE
Safety Stock MARC-EISBE
Min. Lot Size MARC-BSTMI
Max. Lot Size MARC-BSTMA
Fixed lot size MARC-BSTFE
Rounding value MARC-BSTRF
Max.stock level MARC-MABST
Indiv./coll. MARC-SBDKZ
Storage costs MARC-LAGPR
SelectionMethod MARC-ALTSL
Discontin. ind. MARC-KZAUS
Eff.-out date MARC-AUSDT
Follow-Up Matl MARC-NFMAT
Reqmts grouping MARC-KZBED
Mixed MRP MARC-MISKZ
SchedMargin key MARC-FHORI
Backflush MARC-RGEKZ
ProdScheduler MARC-FEVOR
Processing time (MAR MARC-BEARZ
Setup time (MARC-RUE MARC-RUEZT
Interoperation MARC-TRANZ
Base quantity (MARC- MARC-BASMG
InhseProdTime MARC-DZEIT
Max. stor. per. MARC-MAXLZ
Time unit MARC-LZEIH
Withd.fm.pr.bin MARC-KZPRO
Overdely tol. MARC-UEETO
Unlimited MARC-UEETK
Underdely tol. MARC-UNETO
Total RL time MARC-WZEIT
Replacemt part MARC-ATPKZ
Post to insp. stk MARC-INSMK
QM Control Key MARC-SSQSS
Doc. required MARC-KZDKZ
Insp. interval MARC-PRFRQ
Loading Group MARC-LADGR
BatchManagement (MAR MARC-XCHPF
Quota arr.usage MARC-USEQU
Service level (MARC- MARC-LGRAD
Splitting ind. MARC-AUFTL
Avail. check MARC-MTVFP
Fi.Year Variant (MAR MARC-PERIV
Corr. factors MARC-KZKFK
Setup time (MARC-VRV MARC-VRVEZ
Base quantity (MARC- MARC-VBAMG
Processing time (MAR MARC-VBEAZ
Supply source (MARC- MARC-BWSCL
Autom. PO MARC-KAUTB
Source list MARC-KORDB
Comm./imp. code MARC-STAWN
Ctry of origin (MARC MARC-HERKL
Reg. of origin MARC-HERKR
Comm. code unit MARC-EXPME
Exp/imp group MARC-MTVER
Profit Center (MARC- MARC-PRCTR
Plng calendar MARC-MRPPP
Repetitive mfg MARC-SAUFT
Plng time fence MARC-FXHOR
Consmption mode MARC-VRMOD
Bwd cons. per. MARC-VINT1
Fwd cons.period MARC-VINT2
Alternative MARC-STLAL
Usage MARC-STLAN
Group MARC-PLNNR
Group Counter MARC-APLAL
Cstg Lot Size MARC-LOSGR
SpecProcType MARC-SOBSK
Production unit MARC-FRTME
Prod.stor.loc. MARC-LGPRO
MRP group MARC-DISGR
Component Scrap MARC-KAUSF
CertificateType MARC-QZGTP
Takt time MARC-TAKZT
Coverage prof. MARC-RWPRO
Field name MARC-COPAM
CC phys. inv. (MARC- MARC-ABCIN
Variance key MARC-AWSLS
SerialNoProfile MARC-SERNP
Confble matl MARC-STDPD
REM profile MARC-SFEPR
Neg. stocks MARC-XMCNG
Target QM sys. MARC-QSSYS
Planning cycle MARC-LFRHY
Rnding Profile (MARC MARC-RDPRF
Ref.matl: cons. MARC-VRBMT
Ref.plant:cons. MARC-VRBWK
Date to MARC-VRBDT
Multiplier MARC-VRBFK
Autom.reset MARC-AUTRU
Preference MARC-PREFE
Exemption cert. MARC-PRENC
Continued.... -
Removal of batch management indicator from material master
I had removed all batch stock from material code but when trying to remove batch management indicator from material master system is giving the message "batches already exist"
Please suggest the solution.Hi,
The material is NEW and Batch Managed. No stocks, orders, batches are existing.
If the Batch Management indicator is removed in Material Master, is there any way *to see/track the batch/lot * of the product.
Scenarios: Material is NOT Batch Managed
1. How to track a batch received for Purchase order.
2. How to track a Batch created in a Production order.
3. How to track a Batch in Sales Order.
Thanks,
VB -
Material Status field in Material master
Hi,
This is regarding Material Master.
Where can I find field Material Status (MARA-PSTAT) in Material Master??
regards,
RcDifferent views of material master when maintained are given a unique ID such as:
Work scheduling - A
Accounting - B
Classification - C
MRP - D
Purchasing - E
Production resources/tools - F
Costing - G
Basic data - K
Storage - L
Forecasting - P
Quality management - Q
Warehouse management - S
Sales - V
Plant stocks - X
Storage location stocks - Z
MARA-VPSTA- MARA is the master table for materials and is at client level. VPSTA tells you all the views that have been created for the material. and Plant Stock and Storage Location stock views get created automatically.
MARA-PSTAT - tells you the views that have been created manually.
MARC-PSTAT - tells you the view created manually, relevant to Plant
MARD-PSTAT - tells you the view created manually, relevant to Storage Location data (Storage)
MBEW-PSTAT - tells you the view created manually, relevant to Finance (Accounting and Costing) -
Old material number - Field in Basic Data 1 View Material Master
Hai Techies,
We have a field called old material number - MARA-BISMT in material master basic data 1 view. Is that field is just for reference of old material or does it have any effects in the SAP MM when using the material for purchasing or in BOM or so on.
Could any one please highlight me the consequences of using this field to refer a old material number for the new number created.
Thanking you in advance.
Regards,
Kris.SHello Kris,
Number under which you have managed the material so far or still manage it,
for example, in another system or in a card index.
You can use the old material number to systematically search for material
master records via matchcodes.
Your understanding for the use of this field is correct.
regards
Ray -
PuP price not changed in Material master
Hello All experts
I have one question about the material ledger related transaciton, I have a Material with 2+V (price deter. and price control) setting in Material master data in Accounting 1 TAB. And material ledger is active for this material, the Periodic Unit price is 1 USD in current period and stock is 0.
One PO posted for this Material for purchase with actual price 100 USD, and 101 movement type with special stock indicator E was used in Goods receipt posting. I think these stock will be treated as valuated sales order stock. But GR posting didn't trigger any PuP price change in Material master. Is that situation normal? Pls kindly help.With price control V in activity-based material price determination (indicator2 in the material master), the moving average price is calculated. With price control S, the material is valuated with the standard price and the moving average price is calculated for information purposes.
In single-/multi-level material price determination(indicator 3 in the material master), the valuation price (standard price) remains unchanged and a periodic unit price is calculated for the closed period.
This option is only for materials with price control indicator S,and is only recommended if in addition to multiple currencies and/or valuations, you use single-/multi-level material price determination.
In single-/multi-level material price determination, a periodic unit price is updated for information, but it can only be used for material valuation in the closed period. -
Batch Management Indicator Required - Material Master
Hello,
My requirement -
Batch management field has to be required for material Type "FERT"
1) I created a new field selection group for the field "batch management" (MARA-XCHPF)
2) Created a new Field Reference group with "Required" entry (OMS9)
3) Assigned the New Field Reference to the material Type in OMS2
The batch management Field is now a mandatory field.
Issue is, when we try to create only the basic Data Views of a FERT material, system does not allow to save the material untill the "Batch Management Indicator" is activated (even if we are not referencing to any plant specific views of the material master.)
We need to have the the Batch management indicator a required entry for FERT, but at the same time should be able to create material master with basic data Field only (we would be extending the plant specific views later)
Is there a alternative method to have this setting to meet the requirements above?
ThanksHi
I think you can check if the batch level is defined on material or client now, if yes, you may check if that can be switched to plant level. As far as I knw the basic data is for client so the field is shown on basic data view and ask to input value as you customized.
Alternatively, I think you can use the user exit MGA00001to check the field instead of the field selection, this is called when the material master get saved, then you can write your own source code to chec if the customer filled the field only for certain situations.
Best Regards.
Leon. -
Discount in kind indicator in material master
Hi,
where we found discount in kind indicator in material master. what is the functionality of this?
Regards
RifaieHi
Check in purchasing view . MARA-NRFHG. Field name in the screen would be "Qual.f.FreeGoodsDis."
Material qualifies for discount in kind
Specifies whether and for what areas the material qualifies for a discount in kind.
Use
This indicator is presently used only in Purchasing.
Regards
Antony -
Unable to update MARA table custom field in Material master
Hi all,
I have added one custom field in MM01,Basic View 2.
For that i have apended that field in MARA table and created one subscreen for that.
This field is visible in MM02/MM01/MM03 in basic data view 2 .
The issue is that we are not able to save values in MARA table which we entered in this field.
I cheked earliar in SDN but couldn't get the proper solution.
i cheked the below available forum discussion link but couldn't get th proper solution.
In material master How to add a new field on Basic data 1 view
Regards,
AmitHi,
please trye this :
Please make sure u implemented: methods PUT_DATA_TO_SCREEN and GET_DATA_FROM_SCREEN as they are required for data transport. These methods are called from within the program of the application at PBO or PAI .
See below example code:
PBO:
MODULE initialize OUTPUT.
CLEAR: sflight, ok_code.
IF exit IS INITIAL.
CALL METHOD cl_exithandler=>get_instance
CHANGING
instance = exit.
ENDIF.
CALL METHOD cl_exithandler=>set_instance_for_subscreen
EXPORTING
instance = exit.
ENDMODULE.
The factory method is used to create an instance of the adapter class. You then declare the instance using the public static method SET_INSTANCE_FOR_SUBSCREEN to allow the data for display on the screen to be used in the function group of the user or in the module pool.
MODULE data_for_subscreen OUTPUT.
program = sy-repid.
dynpro = sy-dynnr.
CALL METHOD cl_exithandler=>get_prog_and_dynp_for_subscr
EXPORTING
exit_name = 'BADI_SCREEN'
calling_program = program
calling_dynpro = dynpro
subscreen_area = 'SUB'
IMPORTING
called_program = program
called_dynpro = dynpro.
CALL METHOD exit->put_data_to_screen
EXPORTING
flight = sflight
EXCEPTIONS
reserved = 01.
ENDMODULE.
PAI:
MODULE user_command_0200 INPUT.
CASE save_ok.
WHEN 'BACK'.
SET SCREEN 100.
WHEN 'SAVE'.
PERFORM save_flights.
WHEN '+EXT'.
CALL METHOD exit->get_data_from_screen
IMPORTING
flight = sflight
EXCEPTIONS
reserved = 01.
ENDCASE.
ENDMODULE.
The method GET_PROG_AND_DYNP_FOR_SUBSCR and the input/output parameters specified above are used to determine the name of the customer program and the name of the subscreen. The method PUT_DATA_TO_SCREEN which is called at PBO as well as the method GET_DATA_FROM_SCREEN which is called at PAI are used to transport the data to be displayed.
These methods are implemented by the user:
When you define a screen enhancement, you are strongly recommended to provide sample code for the methods PUT_DATA_TO_SCREEN and GET_DATA_FROM_SCREEN. This code is automatically copied when you create an implementation and can be added to if required. The user of the BAdI definition should not be responsible for the data transport.
regards,
..Pradeep -
Updation of ABC indicator in Material Master
Hi,
For ABC analysis, I carried out it according to T_code MC40(Usage value). I got the category of material. For eg "A".But how the ABC indicator updates in Material master.Because I couldnt get indicator in MRP1 view.
Whats the right way? Pls guide me.
Thanks,
Goraksh.Hi,
Update of consumption is based on movement type, and you can decide which movement types should have or have not consumption updating.
Check in transaction OMJJ if the movement types in question have indicator "Consumption posting" (field V_156_VC-KZVBU) as marked.
If it is the case, consumption is updated, opposite for un-ticked.
Hope that helps.
Thanks. -
Batch Management Indicator not getting set for material master
Hi,
In one of the material we need to mark the Batch Management Indicator in Material MAster. We had removed all the stocks from the material. But still we are getting error, Stock exists for the material in Plant XXX and Sloc YYY.
I checked in MARD table and MMBE that for this maaterial there are no stock for said Sloca and Plant.
One thing which I noticed in the Material Master and MARDH table that there exists some stock in Previous persiod for the said Sloc and Plant.
Need to know is this error is due to stock shown in previous period. Why system is checking the previous period stock.
How can we resolve our issue and check this Indicator.
Please let me know as earliest as possible.
Thanks
SGHi,
Refer OSS Note 30656 - Change base unit of measure/batch mngt requirement
Following are the details of this note;
Symptom
When maintaining a material master record, you change the base unit of measure or the batch management requirement indicator or the valuation category. The system then tells you that this change is not possible since stocks still exist. However, no stocks are shown for the material in the stock overview.
Reason and Prerequisites
The message that stocks still exist refers not only to stocks in the current period, but also to stocks in the previous period.
The reason for checking previous period stocks is that postings can also be made to the previous period when entering goods movements. This would result in inconsistencies if the base unit of measure had meanwhile been changed.
Solution
Please check whether stocks still exist for the previous period by displaying, for example, the plant stock view or storage location stock view of the material. You do this by selecting "Extras -> Previous period -> Prev. pd SLoc. stock or Prev. pd plant stock".
If previous period stocks exist, you can make a withdrawal posting as follows:
1. Post the same amount to current period stock (for example, using movement type 561) so that previous period stock and current period stock are identical.
2. Make a withdrawal posting in the previous period for the stock together with posting date (for example, using movement type 562).
You can now try again to change the base unit of measure or the batch management requirement indicator.
Since the posting of the previous period values to zero is identical with posting to the stocks of the current period, you should reverse the above stock postings (i.e. the stock from the previous period should be booked in again) to make sure that the stock values from the previous and the current periods correspond to the state before the change. Please note, however, that the postings are then carried out using the changed master data from the current period (e.g. account determination, etc.)
Regards, -
ABC indicator in Material Master
Hi experts,
Could you please let me know if the ABC indicator field used in MRP1 view is Plant dependant or Plant independant?
We have 2 plants. So should we set this ABC indicator seperately for Plant 1 & Plant 2?
Thanks,
PriABC INDICATOR:
Indicator that classifies a material as an A, B, or C part according to
its consumption value. This classification process is known as the ABC
analysis.
The three indicators have the following meanings:
o A - important part, high consumption value
o B - less important part, medium consumption value
o C - relatively unimportant part, low consumption value
So we can say that this information in Material master is plant specific (Plant dependent)
Logically if we think the material which is of high importance and have high consumption in one plant need not have to be important with same level of consumption in another plant.
Rerward if it is helpful
Regards
Pavan
So when doing the bifercation of the materials based on their importance it is plant which is of utmost importance -
Transparent table field for Tax Indicator on Material Master
I am trying to find the transparent table which holds the Tax indicator field for material in the purchasing view of a material master. Usually it has values - 0,1. Where is this field stored ? I am unable to locate it. I looked into CDPOS..It points to DMLAN. But that is a structure..
TAXIM is the field ( Tax Ind. f. Material). I need to retrieve this field for a report).Hi,
The country is got based on the plant...you can get the country from T001W for the corresponding plant.
Thanks
Naren -
"Material is configurable" indicator in material master record
Hallo, SAP gurus!
I have a problem:
in my SAP system there is a material whose indicator "material is configurable" is set. Due to this I cannot hold calculations of this material on. How can I clear this indicator(it's grayed and I can't modify it)?
I experimented with BOMs for this material and tried to create several BOMs and I managed as I understand. Probably this could influence setting "material is configurable" flag. Because I could hold calculations on this material before.
Need help!
Thanks!Hi
firstly unlock the material in mm02--> basic data 1 you have a small lock on top along with additional data and other tabs when you click on that it will unlock and then you can change it also do get in to img - logistic general- material master--field selection--- define lock relevant keys
here go to config management and material lock check the or uncheck the relevant fields
thanks
Maybe you are looking for
-
I recently purchased Itunes match to download some of the songs from my library onto my phone. Everything downloaded fine. At least I thought, until I tried to listen to my music on my phone. I found that some of the songs that were downloaded fro
-
Frnds By some of the configuration mistake, we are not managing the Check Out A/C (Bank Clearing A/c) on an open item management. But now we need to keep it on opem item management, but there are already some opem items, which was created at the time
-
Email header is present but I can no longer see any of the message.
The content of read emails sometimes disappear. The header is still present but when clicked there is no message in the email. When this happens it effect all existing read emails in the inbox. How do I restore these.
-
Is it possible to display the navigation tabs as square tabs (as you can do for portlets)? And how do I do this? Thanks in advance, Joey
-
How to write JSP in Eclipse 3.1.2 ?
Dear Brothers and Sisters, I have downlaoded Eclispe 3.1.2 from Lomboz : http://lomboz.objectweb.org/overview.html I am able to run servlets but i am not getting how to run a jsp. I just want to print Hello World in my web browser. IE version 6. Best