CAD is not working

Hi,
Running UCM 7.x and IPCC Express 7.x. Integration between UCM & IPCCX is configured successfully. Able to see the Agents in IPCCX.
Installed CAD on Agent PC, after installation when we run CAD application it shows an error message "A licensing error has occurred. Please try again in five minutes. If problem persists,please se your log file or Systen Admin for details."
Please help me out!!
Regards,
Krishna

Duplicate posting, original is here: https://supportforums.cisco.com/thread/2035168
Do not SPAM the forum.

Similar Messages

  • CAD not working on CRM 4.0

    Hi Guys
    We are working on CRM 4.0 webclient. Our SAP CRM is integrated with third party CTI vendor i.e Interactive Intelligence. All the integration is done and we are able to make inbound and outbound calls.
    When any inbound call is received, even though the telephone number is maintained on the Business Partner, the identification of business partner is failing and we get a message called 'No Account information found'.
    We did the below config on Account Identification Profile in SPRO.
    CAD Application ID - CRM_IC (Our CTI vendor confirmed that it doesn't matter whatever is mentioned in this field)
    XSLT File  - CRM_IC_BPIDENT_EXT_IAD_TO_ABAP.
    Are we doing anything wrong? Your help would be highly appreciated.
    Thanks
    Hari

    Hi Guys
    Just an update. We are not using CAD anymore. We are using the standard ANI functionality.
    But this is also not working. I debugged it. Below are my findings. A standard function module is being called up i.e. TREX_BUPA_SEARCH. To this function module, the parameters Telephone Number(IV_TELEPHONE) and Country (IV_COUNTRY_FOR_TEL) are being passed. There is nothing wrong with the parameter for Telephone Number. But for the parameter Country, a value 'X' is being passed. So the function module is returning no business partners.
    Is there anything that I need set on config?
    Your help will be highly appreciated.
    Thanks
    Hari

  • UCCX: Silent monitoring is not working and recorded file is also not playing

    Hi,
    Running UCM 8.5 cluster with UCCX 8.5.
    In CSD, silent monitoring is not working.
    Windows XP OS is running on supervisor desktop. when i select the agent
    then the silent monitoring icon will highlighted once i click on the icon,
    after 5-7 seconds i am getting an error "Silent monitoring session has
    failed".
    Not able to playback the recorded files:
    I can able to record and the file size is 2.6mb for approximate 3min
    recording.When i tried to play from supervisor record viewer it is playing
    but no voice is coming. And i downloaded using play & save option and
    tried to play the .wav file but i can't hear any voice.
    Problem is while playing back the recorded file. I can able to see the
    recorded files in the UCCX.
    Please help me out!!!
    Thanks & Regards,
    Krishna

    It's likely the same problem: CAD is not forwarding packets to CSD or the CCX recording service. Two common causes for this are:
    The phone is not spanning to the PC port or does not allow PC Port VLAN Access. Change these options to true on the phone's configuration in CUCM.
    The NIC of the agent's PC running CAD is not processing 802.1q-tagged Ethernet frames. It must not drop these and pass them into the Windows NDIS stack for CAD to get them. Google is your friend here; this commonly requires registry changes to make the NIC process the packets.

  • New ipod touch slider not working

    I just got a new ipod touch 5 hours ago and the slid to un lock is not working. I have tried restoring it and it does nothing to help. Do i need to take it to the store or is there something i cad do to fix this problem?

    Are you swiping your finger all the way from left to right? If you don't swipe all the way, it won't work.

  • Revealing / Hiding DIVs Not Working

    Howdy, on one of my pages I used getelemntbyid to reveal and hide DIVs. It works perfectly in that page.
    I want to make a page that uses the same structure but different content, so I copied the entire page code into a new document, so I had a duplicate page.
    In the new page, I changed the DIV IDs appropriately, but hide and reveal on the new page does not work. All I changed were the DIV IDs. I went over them with a fine tooth comb to make sure all my ducks are in a row.
    Here's an example of the code that does not work. The only thing I changed from the original was that Div1 became 101. Thanks a lot for any help you can give.
    <tr>
        <td align="left" valign="top"><strong>CAD & MOBILE MANAGEMENT</strong><br>
          <a href="javascript:;" onClick="document.getElementById(‘Div101’).style.display='block';">reveal products</a></td>
      </tr>
      <tr>
        <td><hr></td>
      </tr>
      <tr>
        <td align="left" valign="top"><div id="Div101" style="display:none">
            <p>CAD SOLUTIONS</p>
            <ul>
              <li><a href="example.htm" target="_blank">Product Walkthrough</a></li>
            </ul>
            <p>PTS MOBILE</p>
            <ul>
              <li><a href="example.htm" target="_blank">Product Walkthrough</a></li>
            </ul>
            <p>PTS MAP</p>
            <ul>
              <li><a href="example.htm" target="_blank">Product Walkthrough</a></li>
            </ul>
            <p>AVL REPLAY</p>
            <ul>
              <li><a href="example.htm" target="_blank">Product Walkthrough</a></li>
            </ul>
            <p><a href="javascript:;" onClick="document.getElementById(‘Div101’).style.display='none';">hide products</a>
            <p> </p>
          </div></td>
      </tr>

    I found the answer. You will not believe this, but it is the honest truth.
    It has to do with how I type the new DIV IDs.
    If I select the current DIV ID (example: 1) and type the new DIV ID
    (example: 101), thus replacing the current ID, the javascript does not work.
    However, if I place the curser in front of the 1 (first number of the
    DIV ID) and then type 10 to make the DIV ID 101, the js does work.
    I am not kidding. I repeated this multiple times with the same result.
    That is weird weird weird.
    Thanks for your willingness to help me out.
    Mike

  • CAD goes not responding as soon as transferred call is attempted to conference.

    CAD goes not responding as soon as transferred call is attempted to conference.
    Windows 7 version 32 & 64 bit.
    The agent is using the phone for transfer and conference and the CAD application
    goes not responding.
    When we are restarting the subscriber it is working fine.

    Can Someone please help me on this

  • Monitoring and recording feature not working in UCCX

    Hi,
    The recording and monitoring option is not working in the new UCCX setup I have installed.I have configured following things for desktop monitoring as per the document
    1)Checked that IP Phones are diasy chained and speakers of Supervisor's PC is working,NIC card of agent's and supervisor desktops are compatible
    2)In web CDA P phones to be monitored have been configured
    3)In CCM configured the phone for "Span to PC port" as enabled also configured "Advertise G.722 codec" as disabled
    4)Ran postinstall.exe on agents system and checked if correct NIC adapter is being used for monitoring
    5)Checked the NIC binding order in UCCX server and that is correct
    I noticed one thing that "services"  in both CAD and CSD are showing as "partial services" and they are monitoring and recording services only.Hence is this problem related to these services? How do i correct the recording and monitoring issue?
    Regards
    Amit

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin-top:0in;
    mso-para-margin-right:0in;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0in;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;}
    I would first recycle the VOIP Monitoring Service on both node if this is HA.  This will not affect calls or call processing.
    In addition, you stated you ran post install on the clients desktop but have you ran post install on the server itself?
    In the desktop Administrator, what server is selected to be the default VOIP Monitor server?
    Jason M. Hutchinson

  • Wrapup codes is not working in IP PHONE AGENT.

      We performed all required configuration in CAD ADMIN/ICM Agent Desk Setting and It is working well in CAD Desktop Edition and Desktop-Browser Edition. But, it is not working in IP Phone Agent. All other IP Phone Agent functions is working properly except Wrapup code.
      Based on CAD Documentation, this feature is supported in IP Phone Agent.
    UCCE Version
    UCM =  8.0
    ICM   =  8.0
    IPIVR = 8.0
    Thank you in advance

    Can you post a screen shot of CDA showing the IPPA section.
    david

  • Not work tablet UI on Prestigio 5080 PRO tablet

    I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.

    Would it be possible for you to share the problematic pdf and OS information  with us at [email protected] so that we may investigate?
    Thanks,
    Adobe Reader Team

  • Why self-defined access sequences of free goods can not work?

    Hi gurus,
    I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
    when i used the standard access sequences ,it is OK .
    Can anybody tell me why?
    thanks in advance

    Dear Sandy,
    Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
    Make sure that these fields are flowing in your sales order.
    I hope this will help you,
    Regards,
    Murali.

  • Adobe bridge raw not working with windows vista in photoshop cc, why?

    adobe bridge raw not working in photoshop cc, is there a fix?

    Your sure your using photoshop cc on windows vista?
    I was under the impression that photoshop cc would not even install on windows vista.
    What version of camera raw do you have?
    In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
    (click on the words Camera Raw to see the version)
    Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
    What camera are the camera raw files from?
    Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista.

  • Adobe Bridge CS5 in windows 7 not working?

    Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
    Tried to install creative cloud..again some error. Error code : 82
    Could you please advice how I can fix my adobe bridge.

    https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
    please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager

  • ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

    ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

    BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
    -and step by step http://forums.adobe.com/thread/1440508?tstart=0
    -and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

  • Partner application logoff not working

    We have a partner application registered with sso with custom login screen. The login works fine. We use the following code to logoff the partner application in logoff.jsp
    response.setHeader("Osso-Return-Url", "http://my.oracle.com" );
    response.sendError(470, "Oracle SSO");
    session.invalidate();
    but the logoff is not working properly. It is not invalidating the session and the logout http request is not going from the application server to the sso server.
    Are there any additional configurations for SSO logoff.Any help is appreciated.
    Thanks

    Hi
    The WF should also trigger if i add the Partner function in UI.If i change any Attribute the WF triggers but i dont want to change the attribute when i add the partner function.
    If i have only one event for WF that is Partner Change the WF will not trigger it for the 1st time when i save the UI. But next i come to the same saved doc and add a partner function then the Wf triggers.
    So this means that Partner change is active.
    the issue here is i need to trigger the WF on , the 1st time i save the UI, for which i wil be using Attribute Change and next time when i come back to saved doc the and add only the partner function and no changes are made to attributes the WF should again trigger.
    Thanks
    Tarmeem

  • IPhone 4 Voice Memos not working/saving

    Hi there,
    I'm having trouble with my voice memos too. Up until yesterday they were working fine and now, even though the record button works, the stop button does not and I can only pause them. Worse again is that the button to go into the menu to view all voice memos is not working so I can't play them from my iPhone and nothing new is saving to my iTunes. Please help!

    I've always had the "Include Voice Memos" option selected. I think that only pertains to syncing voice memos from iTunes to the iPhone after it has been copied to iTunes. It has to be the new OS/iTunes not communicating that new memos have been recorded. For some reason they won't sync when I want them to, and then a few syncs later they magically appear.
    By the way, I'm VERY comfortable with the iTunes and iPhone systems. I've been using iTunes for 5 years, and I've been recording class lectures with the iPhone voice memo app (and another app) for a couple years. It's not an error of not seeing that the memos were added; they don't exist in my library or music folders.
    JUST OUT OF CURIOSITY, POST WHICH FIRMWARE YOU ARE RUNNING EXACTLY!!!
    I'm on an iPhone 4, running firmware 4.0.1

Maybe you are looking for