CAD Remote Access/IPC connect messaging
Within the CAD documentation, there is reference to being able to enable CAD to receive IPC Events over UDP (ref: "Remote Access" within CAD user guide.
Two of the actions that can be sent to CAD via XML are the "Make Call" action and the "Set Variable" action.
We would like to confirm if it's possible to either bundle multiple actions together under a single "IPCActions" command or to send multiple "IPCActions" commands in the context of a single call (eg; send a MakeCall, then send multiple SetVariable commands).
You would need to do the latter. I'm not sure on the timing of this - I don't know if the CTI server will accept the set variable commands prior to establising the connnection. (Since this is UDP, the CAD servers are just passing this data along to CTI - there is not confirmation.) This is something you'd need to play around with.
regards,
Tom
Similar Messages
-
Windows Could not start remote access auto connection manager
windows Could not start remote access auto connection manager
Hi,
It would be better to provide an ScreenShot for your problem.
Roger Lu
TechNet Community Support -
Remote Access VPN connecting but not passing traffic
I have a remote access VPN configured on a device here. I'm able to connect a device and it assigns me an IP address out of the pool, and injects the routes to its local network, but I'm not able to pass any traffic through the VPN and none of the IPSec SA counters increment for the dial-in connection. I've compared the config here to the samples from documentation and I don't know what I'm missing. Config is below.
3118-FWL001(config)# sho run
: Saved
ASA Version 7.2(3)
hostname 3118-FWL001
domain-name rr-rentals.com
enable password hEgvNHfNHV8zypPu encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.10.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 199.X.X.162 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
passwd 2KFQnbNIdI.2KYOU encrypted
banner exec
banner exec
banner exec
banner exec Any attempted or unauthorized access, use, or modification is prohibited.
banner exec Unauthorized users may face criminal and/or civil penalties.
banner exec The use of this system may be monitored and recorded.
banner exec If the monitoring reveals possible evidence of criminal activity, Adhost can
banner exec provide the records to law enforcement.
banner exec Be safe! Do not share your access information with anyone!
banner exec
banner exec
banner exec
banner asdm
banner asdm
banner asdm
banner asdm Any attempted or unauthorized access, use, or modification is prohibited.
banner asdm Unauthorized users may face criminal and/or civil penalties.
banner asdm The use of this system may be monitored and recorded.
banner asdm If the monitoring reveals possible evidence of criminal activity, Adhost can
banner asdm provide the records to law enforcement.
banner asdm Be safe! Do not share your access information with anyone!
banner asdm
banner asdm
banner asdm
ftp mode passive
dns server-group DefaultDNS
domain-name rr-rentals.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list outside_acl extended permit ip any host 199.X.X.163
access-list outside_acl extended permit icmp any any echo
access-list outside_acl extended permit icmp any any echo-reply
access-list outside_acl extended permit tcp 216.X.X.64 255.255.255.192 any
access-list outside_acl extended permit tcp host 76.X.X.166 any eq 3389
access-list outside_acl extended permit tcp 67.X.X.192 255.255.255.224 any eq 3389
access-list outside_acl extended permit tcp any any eq ftp
access-list outside_acl extended permit tcp any any eq ftp-data
access-list outside_acl extended permit tcp host 72.X.X.71 any eq 3389
access-list outside_acl extended permit tcp host 26.X.X.155 any eq 3389
access-list outside_acl extended permit tcp host 24.X.X.155 any eq 3389
access-list outside_acl extended permit icmp any any unreachable
access-list outside_acl extended permit icmp any any time-exceeded
access-list outside_acl extended permit tcp host 71.X.X.170 any eq 3389
access-list outside_acl extended permit tcp host 24.X.X.200 any eq 3389
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.4.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.20.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.20.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.20.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.20.0 255.255.255.0 192.168.10.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.10.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.20.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list outside_2_cryptomap extended permit ip 192.168.10.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list outside_4_cryptomap extended permit ip 192.168.10.0 255.255.255.0 192.168.4.0 255.255.255.0
access-list outside_3_cryptomap extended permit ip 192.168.10.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list rr-vpn_splitTunnelAcl standard permit 192.168.10.0 255.255.255.0
access-list rr-vpn_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
pager lines 24
logging enable
logging buffer-size 1048576
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpnpool 192.168.20.1-192.168.20.254 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 199.X.X.163 192.168.10.2 netmask 255.255.255.255
access-group outside_acl in interface outside
route outside 0.0.0.0 0.0.0.0 199.X.X.161 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
aaa authentication enable console LOCAL
aaa authentication serial console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 216.X.X.64 255.255.255.192 outside
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection tcpmss 1200
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 50.X.X.58
crypto map outside_map 1 set transform-set ESP-AES-128-SHA
crypto map outside_map 2 match address outside_2_cryptomap
crypto map outside_map 2 set pfs
crypto map outside_map 2 set peer 75.X.X.253
crypto map outside_map 2 set transform-set ESP-AES-128-SHA
crypto map outside_map 3 match address outside_3_cryptomap
crypto map outside_map 3 set pfs
crypto map outside_map 3 set peer 173.X.X.69
crypto map outside_map 3 set transform-set ESP-AES-128-SHA
crypto map outside_map 4 match address outside_4_cryptomap
crypto map outside_map 4 set pfs
crypto map outside_map 4 set peer 70.X.X.194
crypto map outside_map 4 set transform-set ESP-AES-128-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes
hash sha
group 5
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 192.168.10.2 255.255.255.255 inside
ssh 192.168.0.0 255.255.0.0 inside
ssh 216.X.X.64 255.255.255.192 outside
ssh 50.X.X.58 255.255.255.255 outside
ssh timeout 60
ssh version 2
console timeout 0
management-access inside
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
inspect icmp error
service-policy global_policy global
tftp-server outside 216.X.X.116 3118-FWL001.config
group-policy rr-vpn internal
group-policy rr-vpn attributes
dns-server value 216.X.X.12 66.X.X.11
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value rr-vpn_splitTunnelAcl
username rrlee password B6rKS8LmKC50oIXK encrypted privilege 0
username rrlee attributes
vpn-group-policy rr-vpn
username cschirado password QYICGrOFAZ9iPWpp encrypted privilege 0
username cschirado attributes
vpn-group-policy rr-vpn
username daniel password SZsXZCSuVXcFn9NB encrypted privilege 15
username adhostadm password 7P2Y2Ow1o0.VSjvh encrypted privilege 15
username troy password amZKsxVU.8N9kKPb encrypted privilege 0
username troy attributes
vpn-group-policy rr-vpn
username troyr password Hek9zbMrM6wEDSfi encrypted privilege 15
username druiz password 33oau7XOcvhJ3DMv encrypted privilege 0
username druiz attributes
vpn-group-policy rr-vpn
username theresa password qWsPnR.vfjXzlunC encrypted privilege 0
username theresa attributes
vpn-group-policy rr-vpn
username kevin password R5DPfUVhzGCEg6pu encrypted privilege 0
username kevin attributes
vpn-group-policy rr-vpn
username andrea password MyhIPdH6UJQDon77 encrypted privilege 0
username andrea attributes
vpn-group-policy rr-vpn
tunnel-group 50.X.X.58 type ipsec-l2l
tunnel-group 50.X.X.58 ipsec-attributes
pre-shared-key *
tunnel-group 75.X.X.253 type ipsec-l2l
tunnel-group 75.X.X.253 ipsec-attributes
pre-shared-key *
tunnel-group 72.X.X.71 type ipsec-l2l
tunnel-group 72.X.X.71 ipsec-attributes
pre-shared-key *
tunnel-group 173.X.X.69 type ipsec-l2l
tunnel-group 173.X.X.69 ipsec-attributes
pre-shared-key *
tunnel-group rr-vpn type ipsec-ra
tunnel-group rr-vpn general-attributes
address-pool vpnpool
default-group-policy rr-vpn
tunnel-group rr-vpn ipsec-attributes
pre-shared-key *
tunnel-group 70.X.X.194 type ipsec-l2l
tunnel-group 70.X.X.194 ipsec-attributes
pre-shared-key *
prompt hostname contextHere are the results of the commands you requested. I'm not able to ping either direction.
Thanks,
James
3118-FWL001# sho cry isa sa
Active SA: 5
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 5
1 IKE Peer: 50.34.254.58
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
2 IKE Peer: 173.10.71.69
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
3 IKE Peer: 75.151.109.253
Type : L2L Role : initiator
Rekey : no State : MM_ACTIVE
4 IKE Peer: 70.99.88.194
Type : L2L Role : initiator
Rekey : no State : MM_ACTIVE
5 IKE Peer: 216.211.143.85
Type : user Role : responder
Rekey : no State : AM_ACTIVE
3118-FWL001# sho cry ips sa
interface: outside
Crypto map tag: outside_dyn_map, seq num: 20, local addr: 199.21.66.162
local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
remote ident (addr/mask/prot/port): (192.168.20.2/255.255.255.255/0/0)
current_peer: 216.211.143.85, username: kevin
dynamic allocated peer ip: 192.168.20.2
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 216.211.143.85
path mtu 1500, ipsec overhead 58, media mtu 1500
current outbound spi: CBF94621
inbound esp sas:
spi: 0x8D8279CA (2374138314)
transform: esp-3des esp-sha-hmac none
in use settings ={RA, Tunnel, }
slot: 0, conn_id: 200, crypto-map: outside_dyn_map
sa timing: remaining key lifetime (sec): 28715
IV size: 8 bytes
replay detection support: Y
outbound esp sas:
spi: 0xCBF94621 (3422111265)
transform: esp-3des esp-sha-hmac none
in use settings ={RA, Tunnel, }
slot: 0, conn_id: 200, crypto-map: outside_dyn_map
sa timing: remaining key lifetime (sec): 28715
IV size: 8 bytes
replay detection support: Y
Crypto map tag: outside_map, seq num: 1, local addr: 199.21.66.162
access-list outside_1_cryptomap permit ip 192.168.10.0 255.255.255.0 192.168.1.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.10.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.1.0/255.255.255.0/0/0)
current_peer: 50.34.254.58
#pkts encaps: 15356573, #pkts encrypt: 15356573, #pkts digest: 15356573
#pkts decaps: 9021115, #pkts decrypt: 9021114, #pkts verify: 9021114
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 15356573, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 50.34.254.58
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: FE16571B
inbound esp sas:
spi: 0x78BD7E4F (2025684559)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 86, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4263158/5788)
IV size: 16 bytes
replay detection support: Y
outbound esp sas:
spi: 0xFE16571B (4262876955)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 86, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4064653/5788)
IV size: 16 bytes
replay detection support: Y
Crypto map tag: outside_map, seq num: 4, local addr: 199.21.66.162
access-list outside_4_cryptomap permit ip 192.168.10.0 255.255.255.0 192.168.4.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.10.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.4.0/255.255.255.0/0/0)
current_peer: 70.99.88.194
#pkts encaps: 491814, #pkts encrypt: 491814, #pkts digest: 491814
#pkts decaps: 416810, #pkts decrypt: 416810, #pkts verify: 416810
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 491814, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 70.99.88.194
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: 533F55E1
inbound esp sas:
spi: 0xE2F461AD (3807666605)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 194, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4273818/27167)
IV size: 16 bytes
replay detection support: Y
outbound esp sas:
spi: 0x533F55E1 (1396659681)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 194, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4266133/27167)
IV size: 16 bytes
replay detection support: Y
Crypto map tag: outside_map, seq num: 2, local addr: 199.21.66.162
access-list outside_2_cryptomap permit ip 192.168.10.0 255.255.255.0 192.168.2.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.10.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.2.0/255.255.255.0/0/0)
current_peer: 75.151.109.253
#pkts encaps: 207718, #pkts encrypt: 207718, #pkts digest: 207718
#pkts decaps: 142739, #pkts decrypt: 142739, #pkts verify: 142739
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 207722, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 75.151.109.253
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: 8D74AC18
inbound esp sas:
spi: 0x0CF7F70B (217577227)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 195, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4274490/23242)
IV size: 16 bytes
replay detection support: Y
outbound esp sas:
spi: 0x8D74AC18 (2373233688)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 195, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4270718/23242)
IV size: 16 bytes
replay detection support: Y
Crypto map tag: outside_map, seq num: 3, local addr: 199.21.66.162
access-list outside_3_cryptomap permit ip 192.168.10.0 255.255.255.0 192.168.3.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.10.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.3.0/255.255.255.0/0/0)
current_peer: 173.10.71.69
#pkts encaps: 3427935, #pkts encrypt: 3427935, #pkts digest: 3427935
#pkts decaps: 2006044, #pkts decrypt: 2006044, #pkts verify: 2006044
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 3427935, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 173.10.71.69
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: 2E8A6147
inbound esp sas:
spi: 0x467968AB (1182361771)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 154, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4270213/18597)
IV size: 16 bytes
replay detection support: Y
outbound esp sas:
spi: 0x2E8A6147 (780820807)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 154, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4162093/18597)
IV size: 16 bytes
replay detection support: Y
3118-FWL001# sho run route
route outside 0.0.0.0 0.0.0.0 199.21.66.161 1 -
Remote access vpn connects to 5505 but cannot ping any servers
I have a cisco 5505 and am trying to configure it with ASDM 6.4.
My vpn client connects ok to the network but I am unable to reach any of the servers.
I'm sure its a simple configuration issue as I don't have much experience with Cisco configuation.
Any suggestions on where to look would be much appreciated.
Thanks in advance
GrahamThanks Jennifer.
Running config:
Cryptochecksum: 21ec6d8c 73515258 ed808b45 e154b1c6
: Saved
: Written by admin at 17:42:19.318 GMT/IDT Thu Sep 20 2012
ASA Version 8.2(5)
hostname IS-18241
enable password p2SKmVPuBXX32cE encrypted
passwd 2KFnbXXKXX encrypted
names
name 78.129.xxx.xx IS-18223_External
name 192.168.100.2 IS-18223_Internal
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
shutdown
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
shutdown
interface Vlan1
nameif Inside
security-level 100
ip address 192.168.100.1 255.255.255.0
interface Vlan2
nameif Outside
security-level 0
ip address 78.129.xxx.xx 255.255.255.0
boot system disk0:/asa825-k8.bin
ftp mode passive
clock timezone GMT/IST 0
clock summer-time GMT/IDT recurring last Sun Mar 1:00 last Sun Oct 2:00
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list basic extended permit tcp any any eq 3389
access-list basic extended permit tcp any any eq ssh
access-list basic extended permit tcp any any eq www
access-list basic extended permit tcp any any eq 902
access-list basic extended permit tcp any any eq https
access-list basic extended permit icmp any any
access-list allow extended permit ip any any
access-list Inside_nat0_outbound extended permit ip any host IS-18223_Internal
access-list SplitTunnel standard permit 192.168.100.0 255.255.255.0
access-list Inside_nat_outbound extended permit ip 192.168.100.0 255.255.255.0 any
pager lines 24
logging enable
logging asdm informational
mtu Inside 1500
mtu Outside 1500
ip local pool RemoteAddressPool 192.168.100.100-192.168.100.150 mask 255.255.255.128
icmp unreachable rate-limit 1 burst-size 1
asdm location IS-18223_External 255.255.255.255 Inside
asdm location IS-18223_Internal 255.255.255.255 Inside
no asdm history enable
arp timeout 14400
global (Inside) 1 interface
global (Outside) 1 interface
nat (Inside) 0 access-list Inside_nat0_outbound
nat (Inside) 1 access-list Inside_nat_outbound
static (Inside,Outside) IS-18223_External IS-18223_Internal netmask 255.255.255.255
access-group allow in interface Inside
access-group allow out interface Inside
access-group basic in interface Outside
access-group allow out interface Outside
route Outside 0.0.0.0 0.0.0.0 78.129.xxx.x 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication enable console LOCAL
aaa authentication ssh console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 Outside
no snmp-server location
no snmp-server contact
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map Outside_map interface Outside
crypto isakmp enable Outside
crypto isakmp policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto isakmp policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto isakmp policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 Outside
ssh timeout 60
ssh version 2
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DfltGrpPolicy attributes
dns-server value 87.117.198.200 87.117.237.100
split-tunnel-policy tunnelspecified
split-tunnel-network-list value SplitTunnel
username XX password uvgXvd9nQEHdkA73 encrypted privilege 15
username XX password 3CUtfh8r/IKb6DxX encrypted
username XX attributes
service-type remote-access
tunnel-group Remote type remote-access
tunnel-group Remote general-attributes
address-pool RemoteAddressPool
tunnel-group Remote ipsec-attributes
pre-shared-key 5|J5XX&6u*
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:21ec6d8c73515258ed808b45e154b1c6
: end -
Can you create a Remote Access VPN connection to tunnel DMZ LAN and Inside Networks simultaneously?
I have a customer that has a ASA 5510 version 8.3 with IPSEC Client Access that includes some of their networks on the Inside interface. The issue they are having is when their mobile users connect with the vpn client (which is using split tunneling), they can no longer access their web server applications that are running in the DMZ. Without the client connected, they access the web servers via the external public IP. Once they are connected via vpn, their default dns server becomes the internal AD DNS server, which resolves the DNS of the web servers to the private DMZ ip address.
Can a Remote Access VPN client connection be allowed to connect to both the DMZ interface and the Inside Interface? I had always only setup RA VPN clients to connect to networks on the Inside Interface.
I tried adding the DMZ network to the Split Tunnel list, but I could not access anything it while connected to vpn using the private IP addresses.Yes, you should be able to access DMZ subnets as well if they are added to the split tunnel ACL. You could check the NAT exemption configuration for the DMZ and also check if the ASA is forwarding the packet through DMZ interface by configuring captures on the DMZ interface.
Share the configuration if you want help with the NAT exemption part. -
Can I remotely access HD connected to Extreme?
I know to control a routered mac you need static mapped addresses.
However since an HD connected via USB to an extreme airport will always be connected to the same address, is there a way to access the HD?
I have a filemaker database I want to be able to access from the office and from home. Can ARD now manage non statically routed macs?
alanJust plug the disk drive into the USB port on the AirPort Extreme base station and it should just pop up on any Mac that accesses that base station. You'll want to go into the AirPort set up utility's manual configuration section to password protect the disk drive though.
-
* Original Title: SonicWall Netextender issue with Windows 8.1
I am able to install SonicWall Netextender version 6.0.181 without any issues in my Windows 8.1 machine. When i try to establish the connection getting this error "Remote Access Service Error - Rebooting might Solve the problem".
Hope someone can help me in resolving this issue.Hi,
Please go to Windows Service manager, run "services.msc", then Look for the Remote Access Auto Connection Manager and Remote Access Connection Manager to see if those two services have been started. If not, set them to automatic start, reboot the machine,
and install\configure NetExtender again.
Since this is a third party application, it's recommended to contact the application vender to check the compatibility with Windows 8.1\IE 11, because they're more familiar with the application.
http://help.mysonicwall.com/sw/eng/2605/ui2/1000/Admin/SSL-VPN_2000_1.0_Admin-8-1.html
NOTE
This response contains a reference to a third party World Wide Web site. Microsoft
is providing this information as a convenience to you. Microsoft does not control these sites and has not
tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support -
Remote access VPN with ASA 5510 using DHCP server
Hi,
Can someone please share your knowledge to help me find why I am not able to receive an IP address on remote access VPN connection while I can get an IP address on local DHCP pool?
I am trying to setup remote access VPN with ASA 5510. It works with local dhcp pool but doesn't seem to work when I tried using an existing DHCP server. It is being tested in an internal network as follows:
ASA Version 8.2(5)
interface Ethernet0/1
nameif inside
security-level 100
ip address 10.6.0.12 255.255.254.0
ip local pool testpool 10.6.240.150-10.6.240.159 mask 255.255.248.0 !(worked with this)
route inside 0.0.0.0 0.0.0.0 10.6.0.1 1
crypto ipsec transform-set FirstSet esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map dyn1 1 set transform-set FirstSet
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface inside
crypto isakmp enable inside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
vpn-addr-assign aaa
vpn-addr-assign dhcp
group-policy testgroup internal
group-policy testgroup attributes
dhcp-network-scope 10.6.192.1
ipsec-udp enable
ipsec-udp-port 10000
username testlay password *********** encrypted
tunnel-group testgroup type remote-access
tunnel-group testgroup general-attributes
default-group-policy testgroup
dhcp-server 10.6.20.3
tunnel-group testgroup ipsec-attributes
pre-shared-key *****
I got following output when I test connect to ASA with Cisco VPN client 5.0
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDO
4024 bytesR copied in 3.41 0 secs (1341 by(tes/sec)13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 853
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing SA payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ISA_KE payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing nonce payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received xauth V6 VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received DPD VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received Fragmentation VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: True Aggressive Mode: False
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received NAT-Traversal ver 02 VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received Cisco Unity client VID
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, Connection landed on tunnel_group testgroup
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing IKE SA payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA Proposal # 1, Transform # 9 acceptable Matches global IKE entry # 1
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ISAKMP SA payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ke payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing nonce payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for Responder...
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Computing hash for ISAKMP
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing Cisco Unity VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing xauth V6 VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing dpd vid payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Traversal VID ver 02 payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing Fragmentation VID + extended capabilities payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Send Altiga/Cisco VPN3000/Cisco ASA GW VID
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + HASH (8) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NAT-D (130) + NAT-D (130) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 440
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=0) with payloads : HDR + HASH (8) + NOTIFY (11) + NAT-D (130) + NAT-D (130) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 168
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Computing hash for ISAKMP
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Processing IOS/PIX Vendor ID payload (version: 1.0.0, capabilities: 00000408)
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Received Cisco Unity client VID
Jan 16 15:39:21 [IKEv1]: Group = testgroup, I
[OK]
kens-mgmt-012# P = 10.15.200.108, Automatic NAT Detection Status: Remote end is NOT behind a NAT device This end is NOT behind a NAT device
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing blank hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing qm hash payload
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=d4ca48e4) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 72
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=d4ca48e4) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 87
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): Enter!
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Processing MODE_CFG Reply attributes.
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary WINS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary WINS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: IP Compression = disabled
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling Policy = Disabled
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Browser Proxy Setting = no-modify
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Browser Proxy Bypass Local = disable
Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, User (testlay) authenticated.
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing blank hash payload
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing qm hash payload
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=6b1b471) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 64
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=6b1b471) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 60
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): Enter!
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Processing cfg ACK attributes
Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=49ae1bb8) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 182
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): Enter!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Processing cfg Request attributes
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for IPV4 address!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for IPV4 net mask!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for DNS server address!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for WINS server address!
Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Received unsupported transaction mode attribute: 5
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Banner!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Save PW setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Default Domain Name!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Split Tunnel List!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Split DNS!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for PFS setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Client Browser Proxy Setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for backup ip-sec peer list!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Client Smartcard Removal Disconnect Setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Application Version!
Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Client Type: WinNT Client Application Version: 5.0.07.0440
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for FWTYPE!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for DHCP hostname for DDNS is: DEC20128!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for UDP Port!
Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Duplicate Phase 2 packet detected. No last packet to retransmit.
Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=b04e830f) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 84
Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload
Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload
Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Duplicate Phase 2 packet detected. No last packet to retransmit.
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE received response of type [] to a request from the IP address utility
Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Cannot obtain an IP address for remote peer
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE TM V6 FSM error history (struct &0xd8030048) <state>, <event>: TM_DONE, EV_ERROR-->TM_BLD_REPLY, EV_IP_FAIL-->TM_BLD_REPLY, NullEvent-->TM_BLD_REPLY, EV_GET_IP-->TM_BLD_REPLY, EV_NEED_IP-->TM_WAIT_REQ, EV_PROC_MSG-->TM_WAIT_REQ, EV_HASH_OK-->TM_WAIT_REQ, NullEvent
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE AM Responder FSM error history (struct &0xd82b6740) <state>, <event>: AM_DONE, EV_ERROR-->AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL-->AM_TM_INIT_MODECFG_V6H, NullEvent-->AM_TM_INIT_MODECFG, EV_WAIT-->AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG-->AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK-->AM_TM_INIT_XAUTH_V6H, NullEvent-->AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b terminating: flags 0x0945c001, refcnt 0, tuncnt 0
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending delete/delete with reason message
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing blank hash payload
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing IKE delete payload
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing qm hash payload
Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=9de30522) with payloads : HDR + HASH (8) + DELETE (12) + NONE (0) total length : 80
Regards,
LayFor RADIUS you need a aaa-server-definition:
aaa-server NPS-RADIUS protocol radius
aaa-server NPS-RADIUS (inside) host 10.10.18.12
key *****
authentication-port 1812
accounting-port 1813
and tell your tunnel-group to ask that server:
tunnel-group VPN general-attributes
authentication-server-group NPS-RADIUS LOCAL
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni -
Routing Issue for Remote Access Clients over Site to Site VPN tunnels
I have a customer that told me that Cisco has an issue when a customer has a topology of let's say 3 sites that have site to site tunnels built and a Remote Access client connects to site A and needs resources at Site B but the PIX won't route to that site. Has this been fixed in the ASA?
Patrick, that was indeed true for a long time.
But now it is fixed in PIX and ASA version 7.x.
Please refer to this document for details:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml -
Remote access vpn clients, access to Internet resources
Hello, we currently have a remote access vpn set up terminating on an ASA 5520. Remote access users connect into this ASA and are able to access resources inside of the firewall- the public IP of the ASA is 1.1.1.135. We need these users to be able to access resources natted behind another ASA firewall on the same public IP segment, at IP address 1.1.1.165.
I have gotten to the point where I believe I have all of my Nat/global statements in place, along with my ACLs on both firewalls, but I am not able to make the connection to the server behind the second ASA.
running packet tracer on the second ASA (hosting the 1.1.1.165 server) shows that the packet will be allowed. RUnning packet tracer on the Remote access VPN ASA is showing that the packet is dropped due to :
Action: drop
Drop-reason: (ipsec-spoof) IPSEC Spoof detected
To me, this should be a simple setup, very similar to a company that tunnels all traffic (including Internet traffic) for remote access VPN users. It just doesn't seem like my traffic is getting to the second ASA wioth the remote host.
Anyone have any ideas?I figured out the answer- I had to add a nat statement form my VPN user subnet to be natted to the outside global IP:
nat (outside) 1 10.2.2.0 255.255.255.0 (this is my vpn subnet)
global (outside) 1 interface -
Remote access vpn going through another firewall segment
Hi,
Can i know that when use remote access vpn connect to asa firewall inside interface, after that the remote access vpn is it can connect to another firewall segment , the firewall segment is behind the inside interface?Hello Sam,
As long as you include that traffic into the crypto acl and also on the NO_NAT configuration the answer would be yes. That is possible
Regards,
Julio -
Routing and Remote access - internal network not accessing internet through public network!
Hello,
Good Evening to all.
I got an issue in routing and remote access on windows 2003 server. This server is already configured as File server, domain server and Application server. Also configured as router (through routing & remote access) for connecting three different
network to each other. So This server has three NIC card installed and each NIC card represent separate network.
three different network are - 192.42.160.0/24 , 192.42.161.0/24, 192.42.162.0/24
Three NIC card installed on server as with following IP address -
NIC -1 = 192.42.160.220 , Sub- 255.255.255.0 , Gateway - NO
NIC -2 = 192.42.161.220 , Sub- 255.255.255.0 , Gateway - 192.161.220.112 (This ip for internet access so 4g router IP)
NIC -3 = 192.42.162.220, , Sub- 255.255.255.0 , Gateway - NO
Now the issue is I can reach to internet & (also pinging to router ip 192.42.161.112) from only one network that is - 192.42.161.0/24 , BUT when I trying to access internet from another two network (192.42.160.0/24 & 192.42.162.0/24) I cant access
it and moreover can't ping to internet router ip - 192.42.161.112...
So how I can access to internet from other two network also?
I was already configured static routing for all three network but still I was not success. really I don't know what exactly static routing it should be done in routing & remote access so that all three network can reach to internet?
Sorry if I am not able to explain properly. Please let me know if you need more explain on this...
Thanks to all.Dear Milos,
I am happy to hear from you....
1.- Actually the setup was done long before by another guy and right now I don't want to change it.
Nice to hear from you! Thank you so much. Actually this is first time I am using technet forum upon the suggestion from one of the my friend. So any your help from you will help me a great in this issue...
I ran the route print command and given follow are the results.
I have only added the default route as per the below routes. Please guide me know how to add other static routes for three network.
D:\Documents and Settings\Administrator>route print
IPv4 Route Table
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 30 05 ad 8f 5c ...... Broadcom NetXtreme Gigabit Ethernet - Teefer2 Mi
niport
0x3 ...00 0e 0c a7 c4 f8 ...... Intel(R) PRO/1000 GT Desktop Adapter - Teefer2 M
iniport
0x4 ...00 0e 0c a7 c5 85 ...... Intel(R) PRO/1000 GT Desktop Adapter #2 - Teefer
2 Miniport
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.42.161.112 192.42.161.220 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.42.160.0 255.255.255.0 192.42.160.220 192.42.160.220 20
192.42.160.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.160.255 255.255.255.255 192.42.160.220 192.42.160.220 20
192.42.161.0 255.255.255.0 192.42.161.220 192.42.161.220 20
192.42.161.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.161.255 255.255.255.255 192.42.161.220 192.42.161.220 20
192.42.162.0 255.255.255.0 192.42.162.220 192.42.162.220 20
192.42.162.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.162.255 255.255.255.255 192.42.162.220 192.42.162.220 20
224.0.0.0 240.0.0.0 192.42.160.220 192.42.160.220 20
224.0.0.0 240.0.0.0 192.42.161.220 192.42.161.220 20
224.0.0.0 240.0.0.0 192.42.162.220 192.42.162.220 20
255.255.255.255 255.255.255.255 192.42.160.220 192.42.160.220 1
255.255.255.255 255.255.255.255 192.42.161.220 192.42.161.220 1
255.255.255.255 255.255.255.255 192.42.162.220 192.42.162.220 1
Default Gateway: 192.42.161.112
===========================================================================
Persistent Routes:
None
Regards & Thanks
Mahesh -
Routing and Remote Access fails to install
Hello, I recently installed Windows Server 2008 beta 3 onto my new computer, which went smothly. I have ADDS, DHCP, DNS, IIS, Terminal Services, and Network Policy and Access Service installed and they all work perfectly. However, I recently tried to install Routing and Remote Access, but I got the following error message when I finished the configuration wizard: "Installation of the Routing and Remote Access Service failed because: Class not registered (80040154). Whats causing this, and how do I fix this?
I also have this trouble of an error when installing Routing and Remote Access "class not registered..."
It is a Windows Server 2008 RTM clean install.
Added machine to our Windows 2003 domain and then after reboot added Windows Powershell.
Logged in as domain admin and then when tried to add routing and remote access got the message described by everyone else.
Like others I need to know how to get over this problem. -
Can my moto 4 be remotly accessed and my text be read by someone else I am pretty sure mine is
I am on a pre paid plan and am almost certian my wife has remotly accessed my text messages ... how can this happen and how can I stop it
There are a number of apps designed to do this and much more
Top 10 Android Spy Apps and Software you don’t want to miss -
Is "remote access" is the best solution here?
Dear;Helpers
1st .. Thanks you anyway
that's my Topology in the figure
i57.tinypic.com/23mv5v9.png
Required:
To access the local website from the tow Ranges.
Suggestion:
To enable “remote access” for IIS (the local site) , so we can visit it on the Internet, or whatever the solution.
Note: Static IP is Supplied.
i know i can do it, if you helped me ..
need the steps..
A friend advised me to make a "remote desktop" instead of "enable routing & remote access"
could i?
Thanks all anywayHi,
Based on the figure you provided, I would like to know if the 192.168.3.0 network is a branch office in different location.
->To enable “remote access” for IIS (the local site), so we can visit it on the Internet.
If computers of the 192.168.3.0 network want to access the local website in 192.168.2.0 network through Internet, you should set up VPN connection. If you want to use remote desktop connection, the remote clients also need to connect to the 192.168.2.0 network
through Internet at first. And if the remote access clients connect to the 192.168.2.0 network through VPN, it can access the local site without other operation.
Best Regards,
Tina
Maybe you are looking for
-
Could Not Read Archive Interface Builder
I made a new project in Xcode without tweaking any settings. When I go to open my mainwindow in interface builder I get an error saying Could Not Read Archive. Does anyone know whats going on. Please help as I can't work with my interface files
-
Properties lost when widget is updated
I have created a simple widget using the Widget Factory. I've entered some Properties in Captivate and it works fine. However, after updating the widget in Flash and then clicking Update widget in Captivate, my Properties are gone (although the chang
-
Do I need to use standby database in begin backup mode to take the backup?
Hi All, I have a 10g(10.2.0.4) primary database with standby on a solaris platform. I need to create another standby database for the same primary. I have stopped the recovery on existing standby database and started copying(os copy) the files from e
-
Financial Reporting is compatible with Windows 7?
Hello everyone, I am working with Hyperion Planning v.11.1.2 and Financial Reporting v.11.1.2.674 and I need to know if Financial Reporting is compatible with Windows 7, and where I can locate more information you may need about the technical require
-
Removal of case sensitivity in service master
Dear All, thanks in advance.First of all i wish everyone and their family a very happy and prosperous new year 2012. I have an issue where the service master search is becoming case sensitive.So it is becoming difficult to find the service activity.