CAD Segment missing even though XML contains it

Hi Folks,
I am seeing one strange issue in the B2B setup. I am trying to send an invoice to my TP, i see that the Invoice gets picked up by B2B. I got the 997 for the same but when i observed it
i saw that the 997 said it rejected the 810.
Now upon observation i found a strange thing. I see the payload and find my xml as i enqueue. However in the translated EDI document i found one element missing.
CAD SEgment has element 91 and 140 in the xml
however in the EDI the element 91 is missing.
Since 91 is a mandatory field the 810 gets rejected.
Can anyone shed some light on this?

I have verified that the setup has the correct ecs files. I also checked the outgoing ISA segment which shows the correct version number. Even if it were not mandatory if i am sending that piece of information then should it not be translated to the EDI file? As i said it does show in the xml that is sent to B2B.

Similar Messages

  • I have some presentation on the ipad 2 which went missing even though it is still on the icloud.  how do i load them onto the ipad again?  I have already updated the keynote and am currently on ios8

    i have some presentation on the ipad 2 which went missing even though it is still on the icloud.  how do i load them onto the ipad again?  I have already updated the keynote and am currently on ios8

    Here you go:
    You should be able to hit the "Agree" button, if you are on an iPhone right now. On a Mac, you should just left click the button where it said "Accept". I hope this helped.
    To quit the app store, simply hit these keys:
    Than, you should come up with this window:
    Select the app store with:
              a) The up and down arrow keys
              b) Your cursor
    Than hit the 'Enter' button twice. This should close the app store. The force quit window is also accesible through the apple logo in the top left corner of the screen. It should say:
    Force Quit...

  • I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. What can I do?

    I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You

    I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos.  I can stand to re edit one or two projects, but not ALL.

  • I created a 5x7 postcard document in Word with text boxes and graphics.  When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document.  What happened, and how do I fix

    I created a 5x7 postcard document in Word with text boxes and graphics.  When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document.  What happened, and how do I fix it?  I'm trying to upload the PDF version to Vistaprint.  Thanks.

    Reader doesn’t create pdf files. You can use Acrobat (ask in that forum) to create pdfs. You can subscribe to the Adobe PDF Pack which has a create pdf functionality (please ask in that forum), or you can use a third party utility such as ghostscript, cutepdf, or Microsoft’s own PDF creation capability. For third party pdf creation you will need to ask in a forum dedicated to that software as fellow users of Reader are unlikely to have the knowledge to help.

  • I type information on a form and submit. I get an error message that the information is missing even though I see it on the form. How can I resolve this problem?

    I type information on a form and click submit. I get an error message that states that the information is missing even though I see it on the form. (Error message: Please type valid first name). How can I resolve?
    == URL of affected sites ==
    http://https://ushsbc71.recruitmax.com/MAIN/CareerPortal/candidate_update.cfm?szOrderID=88393&szCoverLetter=yes

    Please see [[Use the Adobe Reader plugin to view or download PDF files]]

  • Display level suppressed when installing Office 365 ProPlus via SCCM even though XML says Display Level="Full"

    As the title says the display level is suppressed when installing Office 365 ProPlus via SCCM even though XML says Display Level="Full"
    I would like to install Office ProPlus with the display level visible to the user.  Not all users are local admins so I've installed Office within the admin context.  Does this happen because SCCM installs under system context and as such suppresses
    pop ups to the end user?
    Has anyone been able to get this to work or am i doing something wrong?  If someone can offer me some guidance please.  Here is my XML:
    <Configuration>
    <Add OfficeClientEdition="32" >
        <Product ID="O365ProPlusRetail">
          <Language ID="en-us" />
        <ExcludeApp ID="Access" />
          <ExcludeApp ID="InfoPath" />
          <ExcludeApp ID="Groove" />
          <ExcludeApp ID="Project" />
          <ExcludeApp ID="SharePointDesigner" />
          <ExcludeApp ID="Visio" />
        <ExcludeApp ID="OneNote" />
          <ExcludeApp ID="Publisher" />
        </Product>
      </Add>  -->
    <Updates Enabled="True" />
    <Display Level="Full" AcceptEULA="TRUE" />
    <Property Name="FORCEAPPSHUTDOWN" Value="1" />
    <Logging Name="OfficeSetup.txt" Path="%temp%" />
      <!--  <Property Name="AUTOACTIVATE" Value="1" />  -->
    </Configuration>

    When i install Office 365 ProPlus manually (independently of SCCM) I see the prompts (same SCCM Package and configuration.xml file).  This suggests it is suppressed when ran in the system context via SCCM. 
    How does Microsoft expect you to maintain the build versions (running setup.exe /configure XML) if users are unable to view the prompts? This is significant if the user is already in an Office program they'd get prompted with a message to close the app else
    it automatically closes OR fails depending on if you include the ForceAppShutdown switch in the configuration.xml file.
    The users in the environment are not all local admins which is why i cannot run the deployment in the user context.
    I really need some help, anyone?

  • +1 Jive bug? Thread MISSING even though it's in this forum?!?!

    WHERE is this thread?  When I view it (link) it says it's still in Forum Comments, so I don't think it was moved (unless this place is even more buggy than I thought.)
    http://forums.adobe.com/message/2219228#2219228
    If it is moved (somewhere), how would those of us who already answered the question get back to the thread to respond back to any follow up questions if it was moved to some mystery forum?  If this is the case stop moving gd threads!
    If it hasn't been moved, I'm 10000000% certain that it is NOT showing up in the thread listing for 'forum comments' even though it was updated less than a day ago.  If it hasn't been moved this is a massive, ridiculous Jiveware bug.  Wait, even if it has been moved, it's still a bug!
    Obey the forum thought police.  Violators will be locked, deleted and banned.

    There is something different about that thread.  At the top it has a link saying "Branched to a new thread." with a link that is invalid in Jiveworld.  So something is/was going on with that thing, and it is/was probably another bug.
    Perhaps someone is trying to censor Adobe's customer service incompetence...
    Obey the forum thought police.  Violators will be locked, deleted and banned.

  • CS3: Fonts missing even though installed in Windows\Fonts

    Fonts are "missing" when opening a CS2 Indesign document in InDesign CS3.
    For example, a document uses Adobe Caslon Pro Bold. Under InD CS2, this font was located in Program Files\Common Files\Adobe\Fonts. That directory is now empty (except for some additional fonts that weren't part of CS2). I guess uninstalling CS2 cleaned out this directory.
    When opening the document in CS3, I get a message about a missing font. The only available Caslon face is "Regular".
    There are 5 Adobe Caslon faces installed in Windows\Fonts (regular, bold, italic, bold italic, semibold, semibold italic). But CS3 doesn't recognize anything but "regular".
    I had made backup copies of all Adobe fonts that I had installed with CS2, so I copied those backups to Program Files\Common Files\Adobe\Fonts. Now InD CS3 finds them.
    Has anyone else had this problem? What is the solution? I have re-installed CS3 but this doesn't fix it.

    First up, ATM. ATM4.0 (Light or Deluxe) is not supported under W2K or XP and should be uninstalled. After that, the 4.1.2 patch should be run, which just edits the registry, since removing ATM leaves Windows unable to install Type 1 fonts. Uninstalling ATM4.1 on any Windows platform prior to Vista (which it's not supported under) causes PFM files to be left unassociated with the system font applet preview page. The patch fixes that too. These are the only problems with having ATM on XP and they're usually easily fixed.
    My first step would be to remove ATM because you're running an unsupported version.
    > I did not try the current "light ATM" release because the release text on the Adobe site did not suggest the necessity to upgrade.
    Well, that version of ATM will not state anywhere that it supports XP (given that it predates XP), so the prudent course would be not to install unsupported software until you're sure it will do no harm. And entering the terms "ATM" and "XP" into Adobe's search engine quickly turns up advice not to install any version prior to 4.1.
    > Is there any reason one should only use OT fonts in ID?
    If you're working cross-platform (as you are), then OT is definitely the preferred option, but ID can utilise Type 1 and TrueType fonts with no problems.
    I have most of the BT Futura fonts you listed, though I only have the T1 versions to hand, though I could dig out the TT ones and might. But there are a couple I'm not clear on from your list: BT (do you mean you have BT Regular or Roman and BT Book installed and accessible in FrameMaker?); Medium/Extra Bold Cond (is this medium condensed and extra bold condensed, because you have also listed MdCn BT?); TMed (what's the full name of this?).
    Apart from those three, all the fonts showed up in ID, once I had deactivated the TT versions that came with Windows. Most were listed as variants under Futura BT, including the roman of LtCn BT and MdCn BT. The last two fonts showed up as separate entries in the font list, but only the itals variant, as you saw.
    There is a bug in ID that leaves it sometimes unable to distinguish between regular and book weights, but the issue here seems to me to be one of strange style links in the BT fonts, not anything to do with ID.
    To summarise, remove ATM, check you don't have the Windows TT versions active, and then check all the variant drop-down menus. Then report back here.

  • My iPhone had to be restarted, after I reinstalled it, I have no iTunes on it and the ringtones that I had purchased, are missing, even though they are in iPhone on my PC. What can I do??

    Can someone please help me. My iPhone would not work when I connected to the PC, came up that I had to restore it, when it was finished, I had no iTunes and the ringtones that I has purchased were not on the iPhone, although they were in  iTunes as being purchased, I would really appreciate any help that can be offered.
    Regards
    Penny

    Thank You,ThankYou, Thank You!!!!!!
    I did not believe that it could be so easy, there were a few ringtones missing, but it does not matter. I did not know that was the way to do it, I thought that I had lost everything.
    Again Thank You, I will look into your feedbacks again, when I have another problem.
    Penny 

  • Unable to find the xml message in the queue even though xml is invoked

    Hi,
    Currently,we are invoking a queue in a BPEL Process where we are trying to place an xml into it.When verified in Console can see the queue is invoked and also a new record is being created in the queue but unable to find that xml in it.Could you please tell me how and where can we find the xml in the queue.
    Regards,
    N.Das
    Edited by: DasN on 05-Mar-2013 22:52

    Check these...
    https://forums.oracle.com/forums/ann.jspa?annID=893
    http://docs.oracle.com/cd/E13222_01/wls/docs100/ConsoleHelp/taskhelp/jms_modules/queues/ManageQueues.html
    Cheers,
    Vlad

  • Book loads in ibook but has error pages and chapters missing even though I purchased I think What do I do to fix?

    I tried deleting and redownloading.  Got exactly the same thing.  Has synced to all devices the same way. 
    An hour later, no email saying I purchased it. I did click the $9.99 button and then download.  Very frustrating, as I read first chapter before realizing there was a problem.
    Help greatly appreciated.

    Have you reported it? This kb article should tell you how if you haven't
    http://support.apple.com/kb/HT1933

  • Bridge Browser icon missing - even though connected on BES

    The Bridge Browser icon has disappeared off my Playbook.
    Before you tell me it's OS2 it's not - the Playbook is connected to a BES smartphone, and I've had OS2 since I first got the Playbook and it's only now that the icon has gone.
    I've tried a reset, I've tried re-pairing the tablet and the phone. All the other Bridge icons are there and the tablet is fuctioning normally other than this.
    Any help is much appreciated.
    Ronz

    Have you tried deleting and reconnecting your BlackBerry Bridge?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!

  • Why are photos from iphoto missing even though I havent deleted any?

    I uploaded quite a few photos to facebook via iphoto a long time ago. Recently people have been asking me where they are. When I logged into facebook, i noticed they were gone and also when I loaded iPhoto they were gone.
    I would love to know why this is happening as those photos are really important.

    I have a similar situation.  If you don't mind losing those photos, you can go to: Settings>iCloud>Storage & Backup and then click on "Stop Restoring iPhone."  You'll lose those photos, but you can move on from there. 

  • DBACOCKPIT reports missing secondary indexes even though they exist .

    Hi all,
           On our BI system (7.0) on DBACOCKPIT, system reports some secondary indexes missing even though they already exist.
         Any suggestions for the cause of the problem or what to investigate?
    regards,
    K

    Hi,
    When was statistics updated last time. Update the statistics and chk if the problem is still shown.

  • My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. i cant go to DFU mode cause my home button is broken PLEASE HELP ME GOD I MISS MY IPOD

    My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. i cant go to DFU mode cause my home button is broken PLEASE HELP ME GOD I MISS MY IPOD TOUCH PLEASE :'((

    i cant do that sir ,my ipod touch 4g keeps rebooting and rebooting all over again until the battery is empty HELP GUYS PLEASE

Maybe you are looking for

  • Problem with Business partner flow from R/3  to CRM

    Hi, We are setting up a process to flow of Business Partners from R/3 to CRM.  We have configured PIDE correctly but the problem is when I am creating any customer in R/3 we are getting DUMP.   Kindly help me in this regards. Thanks

  • AV adapter issues

    I cant mirror my iphone4 to my tv using an hdmi wire and a Av adapter, I can only ser videos and netflix bu t I thought I coukd display a lot more, am I doibg something wrong?

  • Two network connections

    Is it possible to be connected to two network connections at the same time?

  • How to Make FormsCentral Accessible

    Can alt text be added to images and the submit button in customized forms created through FormsCentral? If we were to purchase the product, we would need it to meet accessibility guidelines. Thank you.

  • 3rd party menus

    I am having trouble getting started with linko trees I create a new page create a form and a table as a header at the top Next I want to place the menu on the left and a table on the right for data I create a form and table for the data - it is 1000