Cad ver 8 NIC test for 802.1q support

Hi Pros,
UCCX SRND ver 8 mentions that "appendix C on Cisco CAD Installation Guide" describes a way to test whether a computer NIC supports 802.1q for monitoring and recording services.
Couldnt find appendix C on the guide
Anyone knows about where I can find this info or way to test the 802.1q support?
Regards,
Pratik

Hi Pratik,
IP Communicator (in SCCP) is indeed supported as one of the monitoring devices, this is listed in the Hardware/Software compatiblity matrix for UCCX. (http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf)
As your CIPC will be installed on the same PC as the CAD, the RTP packets will be received on this PC and CAD will be able to access them.
Regards,
Angelique

Similar Messages

[svn:osmf:] 14108: Unit test for F4M Subclip support.

Revision: 14108
Revision: 14108
Author:   [email protected]
Date:     2010-02-10 11:37:06 -0800 (Wed, 10 Feb 2010)
Log Message:
Unit test for F4M Subclip support.
Modified Paths:
    osmf/trunk/framework/OSMFTest/org/osmf/elements/f4mClasses/TestManifestParser.as

Hello Alex,
I don't have an answer for you.
But, can you try to use http://drmtest2.adobe.com:8080/Content/anonymous.f4v with locally hosted OSMF player? This content doens't require user/pass info.
I'm wondering that Google TV's flash player doesn't support prompt dialog.
http://drmtest2.adobe.com/AccessPlayer/player.html requires flash player 11. That's why it won't be loaded with flash player 10.x.
Thanks,
-- Hiroshi

Oracle Functional Testing for Web Applications for Oracle Apps

I am trying to test Oracle Application 11i and R12 using Oracle Functional Testing for Web Applications.
In 11i:
If i open any forms then then the Application is getting crashed whereas it's recording the html events.
In R12:
If i open any forms then the Form is getting opened but it's not recording the events happening on the forms
whereas it's recording the html events.
Please let me know whether Oracle Functional Testing for Web Applications supports can be used to test Oracle Apps 11i/R12 including the Forms.
Regards,
Arun

Hi,
AFAIK, there is no official document which states that "Oracle Functional Testing for Web Applications" is certified with Oracle E-Business Suite 11i/R12. I assume it should work with Forms 10g but not with Forms 6i, so it should work (does not mean it is certified) with R12.
I would suggest you log a SR and confirm this with Oracle Support.
Regards,
Hussein

One more solution for Silent Monitoring Windows 7 64-Bit - ERROR VOIP2037 Unable to open the NIC adapter for sniffing.

Hi,
we are using UCCX 8.5 SU3.
After replacing the actual agent workstations with Windows 7 64-bit we had to face problems with the silent monitoring. (no sound at all and in the CSD the usual error popup "Silent Monitor-Session failed...").
In the CAD logfile I found the errorcode. "ERROR VOIP2037 Unable to open the NIC adapter for sniffing. Please reconfigure the installation."
After investigating the logfiles, starting postinstall.exe a hundred times and reading the Configuring and Troubleshooting VoIP Monitoring Guide.
I just learnt about the wonderful tool nicq.exe.
And so i found out that the driver spcd.sys wasn't installed.
Check in the registry for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SPCD"
It seems to me that the "Cisco Supervisor Desktop.msi" never installs the driver one a Windows 7 64-bit.
After starting the NICQ.EXE as administrator the driver is being installed.
Test 1: Check Driver Status
Driver not installed. Attempting to install it...
Driver has now been successfully installed.
SPCD Driver service is not running. Attempting to start it...
SPCD Driver service is now running.
Test 1: SUCCESS
And after that the silent monitoring works again like a charm.
Maybe that info help someone.
kind regards, sebastian

Excellent information, this has been driving me crazy for a while now. Once i saw this info I was able to get it resolved rather quickly.
+5 for you, (I tried to click it above but it would not let me.)

Looking for a nice solution for different cases with nearly same operations

Hi everybody:
I'm looking for a nice solution for the following problem:
I'm measuring different data at the same time (with different devices).
I would like to save these data all in one array (or cluster?), but I
don't know exactly the way to do this. All values have corresponding
time values. So for one data type it would result in a 2d array,
wouldn't it? But how can I save different data types with their time
values in one array? Or should I take a cluster? And how can I get only
a certain type of data out of this array or cluster again? E.g. if I
only need data type "3" with its time stamps for evaluation? I would
really appreciate an example, I work with LV 7. Thanks!
Then - for evaluation - I only need one data type of these different
data. Which one I would like to choose via the frontpanel (it changes
from test to test). So, I thought of a case structure (where I can
choose which data type and correspondingly which evaluation way). The
evaluation steps for the different data types are quite the same, but
can vary in order of execution. I could write for every case the
(nearly) same evaluation steps, but this would take a lot of time, plus
if I need to change one step I need to change it in every case.
Does anybody know a better way?
Thank you very much in advance,
Steffi

steffi.kono wrote:
In this example I have four arrays, which I would like to save alltogether in one file. First column should consists of time stamps, second column of value type 1, third column of value type 2, ... How can I solve this?
Built the 4 1D arrays into a 2D array, the use write to spreadsheet file.
steffi.kono wrote:
And, after that, how can I display only the second coulmn (e.g.) and time stamps in a waveform chart from this file? Or how can I say in LabVIEW: "display the last 30 values of column three over the time in a waveform chart"?
There is "array subset", which allows you to get any desired subset from an array. If yoyu want entire rows or colums, use "index array".
To display the last 30 values in a chart, just feed the data to a chart with the history size set to 30 elements. The rest will fall into place.
LabVIEW Champion . Do more with less code and in less time .

Unit tests for Swing models?

Does anyone know if someone has made some unit test to test the various Swing models?
I didn't find much in a search and checking the OpenJDK6 source bundle there are only about 20 tests (!) for specific bugs.
Specifically I'm looking for a test for TreeModel to test Jide's FilterableTreeModel (I filed a bug so maybe they'll write a test though :) ). SwingX has a nice helper class TreeModelReport but the actual test is not that complete.

Walter Laan wrote:
SwingX has a nice helper class TreeModelReport but the actual test is not that complete.what do you mean by "not complete" - SwingX has no special TreeModel, so nothing much to test :-) should have some TreeTableModel related tests, though. Not sure how complete they are ...
CU
Jeanette

Cisco ISE for 802.1x (EAP-TLS)

I work for a banking organization and security is an area that needs to be improved continuously. I am planning on implementing Cisco ISE for 802.1x together with a Microsoft PKI for certificate issuing and signing.
I am currently trying to implement this in our test environment and I have managed to do a few basic bootstrapping tasks. I need someone to push me into the right direction as to how I can achieve what i am seeking.
I will use Cisco 2900 series switches on the access layer and a few HP switches as well which supports 802.1x.
I want to configure the ISE to process authentication requests using 802.1x EAP-TLS (Certificate Based). All the workstations on the domain needs to authenticate itself using the certificates issued to it by the Certificate Issuing Authority.
I have already managed to get the PKI working and have rolled out the certificates on all the workstations on the test environment. I can't seem to configure the Authentication portion on the ISE.
I request if someone can guide me or direct me to materials that can help achieve the above requirements. The guides available on the Cisco website are overwhelming and I can't seem to figure out how I am supposed to configure the authentication portion.
My email: [email protected]
Cheers,
Krishil Reddy

Hello Mubashir,
Many timers can be modified as needed in a deployment. Unless you are experiencing a specific problem where adjusting the timer may correct unwanted behavior, it is recommended to leave all timers at their default values except for the 802.1X transmit timer (tx-period).
The tx-period timer defaults to a value of 30 seconds. Leaving this value at 30 seconds provides a default wait of 90 seconds (3 x tx-period) before a switchport will begin the next method of authentication, and begin the MAB process for non-authenticating devices.
Based on numerous deployments, the best-practice recommendation is to set the tx-period value to 10 seconds to provide the optimal time for MAB devices. Setting the value below 10 seconds may result in the port moving to MAC authentication bypass too quickly.
Configure the tx-period timer.
C3750X(config-if-range)#dot1x timeout tx-period 10

Why Unable to identify a user for 802.1X authentication (0x50001)?

Hello,
We are trying to set up wifi single-sign-on. When logging to a laptop get a message
"Connecting to Pivot_Users" and after some time "Unable to connect to Pivot_Users" and after that we are logged in to a laptop and successfully connected to Pivot_Users wifi network.
Server: windows server 2003 (with all updates)
laptop: windows 7 professional SP1 (with all updates)
When looking to event log i found this error:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2012-10-10 10:38:01
Event ID:      5632
Task Category: Other Logon/Logoff Events
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      sba01-nb
Description:
A request was made to authenticate to a wireless network.
Subject:
Security ID:
Account Name:                -
Account Domain:                -
Logon ID:                0x0
Network Information:
Name (SSID):                Pivot_Users
Interface GUID:                {64773f24-bf8b-4e91-bbd7-eb199e3c2c5e}
Local MAC Address:        C4:85:08:12:77:44
Peer MAC Address:        00:24:97:83:8E:61
Additional Information:
Reason Code:                Unable to identify a user for 802.1X authentication (0x50001)
Error Code:                0x525
EAP Reason Code:        0x0
EAP Root Cause String:
EAP Error Code:                0x0
Event Xml:
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>5632</EventID>
    <Version>1</Version>
    <Level>0</Level>
    <Task>12551</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2012-10-10T07:38:01.093305500Z" />
    <EventRecordID>37791</EventRecordID>
    <Correlation />
    <Execution ProcessID="760" ThreadID="2224" />
    <Channel>Security</Channel>
    <Computer>sba01-nb</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SSID">Pivot_Users</Data>
    <Data Name="Identity">
    </Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="PeerMac">00:24:97:83:8E:61</Data>
    <Data Name="LocalMac">C4:85:08:12:77:44</Data>
    <Data Name="IntfGuid">{64773F24-BF8B-4E91-BBD7-EB199E3C2C5E}</Data>
    <Data Name="ReasonCode">0x50001</Data>
    <Data Name="ReasonText">Unable to identify a user for 802.1X authentication</Data>
    <Data Name="ErrorCode">0x525</Data>
    <Data Name="EAPReasonCode">0x0</Data>
   <Data Name="EapRootCauseString">
    </Data>
    <Data Name="EAPErrorCode">0x0</Data>
</EventData>
</Event>
Thank you for answer and help.
Regards,
Tadas

Hi,
Thanks for your post.
Have you configured the client to only use user authentication for 802.1X? If so, I would like to inform you that this is expected when you configure the 802.1X to user only authentication.
Here is the process that is followed.
1. As soon as client is connected to the network the Authenticator (switch) periodically sends EAP request packet/frame to the client/supplicant.
2. The client has to respond back with an identify and if its configured only for User authentication then it will send blank identity.
3. The Authenticator cannot validate and the authentication would fail.
4. Windows client is configured for a block time of 20 min. So, once the authentication fails the NIC card will go in block time for 20 min until there is a change in credentials. So, even if the authenticatior(swithch) is periodically sending EAP request
it will just ignore them
5. You will see event 15506 after the event 15514.
Here’s the technet that you we can refer for the reason code : Reason: 0x50001 that we see in the event 15514
http://technet.microsoft.com/en-us/library/cc727747(WS.10).aspx
0x50001 = Dec 327681
Reason code: 327681   Event log message: The 802.1X module was unable to identify a set of credentials to be used. [An example is when the authentication mode is set to “User” but no user is logged on.]   # def name:
ONEX_UNABLE_TO_IDENTIFY_USER
Best Regards,
Aiden
Aiden Cao
TechNet Community Support

Authentication Properties button not functional for 802.1x authentication

With version 4.52 for Windows XP, Build 7TCX26WW of ThinkVantage Access Connections, the 'Authentication Properties' button doesn't work for 802.1x for Ethernet. Has anyone else been experiencing this? Had to work-around by using the Windows Network Connections properties pages for the Ethernet device. Would be nice to have this utility working fully. Found it useful for someone who shifts from one work environment to another.
Thanks in advance.

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
Please try uninstalling the Access Connection
Restart the unit, download and install Access Connection from below link
http://support.lenovo.com/en_IN/downloads/detail.page?DocID=DS013683
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Unit Tests for Beckend Beans?

Does anybody has any idea how to write Unit Tests for JSF Beckend Beans? Especially if they are using session and request objects. How can I simulate Session for example?

Walter Laan wrote:
SwingX has a nice helper class TreeModelReport but the actual test is not that complete.what do you mean by "not complete" - SwingX has no special TreeModel, so nothing much to test :-) should have some TreeTableModel related tests, though. Not sure how complete they are ...
CU
Jeanette

When taking a test for a job application the new tab opens up and tells me a system error has occurred

I have to take a talent assessment test for a job application but when the tab comes up it tells me I have a system error has occurred. What does that mean?

Hi Bob,
I have question that I hope you can answer. I am trying to decide how to set up my wireless network with a 4th generation Airport Time Capsule (802.11n) with a 5th generation Airport Extreme (802.11n). I have read that you can extend your wireless network, but I am unsure which device I should have connected to the modem, etc., or what setup is the best way to utilize these devices. I want to setup my wireless network and get the most out of each device while making it so that internet connection is "excellent" throughout the house. In addition, I also want to be able to use Time Capsule or Airport Etreme to back up with Time Machine. Basically, I don't understand what it is that I have and how to use it in the best way.
Any help with this matter would be greatly appreciated.
Thank you,
Michael

Airpcap and WireShark support for 802.11k, 802.11r, 802.11u?

Folks,
I have a need to troubleshoot/test 802.11k, 802.11u, and 802.11r messaging.
Does anyone know if AirPcap Nx + Wireshark will capture and properly decode these 802.11 amendments:
802.11k
802.11r
802.11u
I have looked in Wireshark forums and seen references to all of the above amendments but I can't find anything conclusive to indicate the level of support for these headers/fields/messages.
Thanks for any insight.
Joey

George,
I don't know yet. However, to begin testing devices I'll need a tool that can decode the protocols so I can see who supports what.
Based on my research for evidence sake,
Wireshark 1.7.0 dev branch appears to:
Support 802.11u fully
Support 802.11r fully
Support 802.11k partially
The 802.11k information elements I can't find or are not supported for 802.11k are:
7.3.2.42 Measurement Pilot Transmission Information
7.3.2.43 BSS Available Admission Capacity
7.3.2.44 BSS AC Access Delay supported
7.3.2.45 RRM Enabled Capabilities
7.3.2.46 Multiple BSSID
-Joey

Upgrade WLAN Nic for 5 GHz Support on GE70

Hello, I've had my MSI GE70 for a few months now and i have had no issues with it until now.
We recently replaced our router to a new one with 5 GHz support, And i noticed GREAT changes in speed.. 4-5 mbps to 30-40 mbps .... on my phone.. which supports 5 GHz...
Now when i tried to connect to this network i could not find it.. and i see that i only have a 802.11b/g/n card.. Is there any card i can replace it with for 802.11a/b/g/n support?''
I currently have the Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC card

Quote from: darkhawk on 27-February-14, 10:43:17
You're welcome to do that. MSI doesn't whitelist components so you could get (for instance) an Intel 6235 I believe it is and use that if you wanted.
The big thing to keep in mind is that you want to get a card that has the same number of antenna ports as your current card. Obviously a card that has 3 antenna's compared to your current one (which probably only has 2) will be a problem.
Would the INTEL Centrino Ultimate-N 6300 work? I have heard about the 6235 having stability issues on windows 8.1

Nice webcam for mt Powerbook G4?

Hello,
Does anyone have any recommendation for a nice webcam for use with PowerPC macs? Would most if not all of the USB 2.0 webcams work with the powerbook G4?
My PowerBook model: PowerBook 5,8(5,9 is the 17 inch before the MBP).. I have 2GB of memory(one stick is 444 and the other is 533/667)

romko23 wrote:
Hello,
Does anyone have any recommendation for a nice webcam for use with PowerPC macs? Would most if not all of the USB 2.0 webcams work with the powerbook G4?
My PowerBook model: PowerBook 5,8(5,9 is the 17 inch before the MBP).. I have 2GB of memory(one stick is 444 and the other is 533/667)
(1) I think you be better served by a current production UVC (USB) webcam that has a warranty.
Some examples: http://www.mac-compatible-web-cam.com/
Don't add any of the software bundled with these cameras (unless you have tested and know that you need it.)
Mac OS; X 10.4.9 (and later) include all drivers needed to use UVC cams.
(2) If you are still considering buying an external iSight, understand that Apple has not sold external iSights for several years. These external iSights are great cameras, but they are getting old as electronics go. I have two, and both work wonderfully, but you have no idea how the one you buy now has been used or treated by its previous owner(s).
Many of us have good service from external iSights. However, as in this example from nearly two years ago, you may find it difficult to determine whether the iSight you buy now is functional:
http://discussions.apple.com/thread.jspa?messageID=9015271
If you buy an external iSight now, buy locally and test it on your Mac before you pay for it. If you cannot do that, (try to) get a written guarantee that you can have the iSight examined by your Apple Authorized Service Provider and can have a refund or exchange if the iSight doesn't pass his checks.
Even if the external iSight you are considering is advertised as an NOS (new, old-stock) iSight, it may not be covered by Apple Warranty. If the seller is not providing you service guarantees or warranty, you may be want to check Apple's iSight Service: Frequently Asked Questions, especially if you cannot test the iSight before you buy to be sure it is working.
(3) Users with Macs older than yours or those using Mac OS earlier than 10.4.9 should be aware of the additional information from Ralph's user tip:
http://discussions.apple.com/thread.jspa?threadID=2018211
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

XI testing for two SAP R/3 systems with same system id/logical system

Hi
We are currently in the process of upgrading our R/3 4.7 to ECC 6.0 and plan to maintain dual landscape for DEV & QA (4.7 & ECC 6.0) for a period for testing and maintaining existing applications for fixes etc. The second DEV & QA (upgraded to ECC 6.0) are copy of respective systems and these systems are created automatically under technical systems in SLD by auto update (RZ70).
The question is, can we use the same XI system for testing inbound/outbound interfaces for both the systems i.e 4.7 & ECC 6.0 at the same time. I am aware of the fact that XI Technical/Business sytems dependent on unique logical systems, so we cannot create new business system for the upgraded DEV-II ECC 6.0 system.
For your information, we have two slds (one for XID/XIQ and second one for XIP).
What are the options without disturbing & maintaining the current XI system set up?
1) Can we change current Business systems e.g DEV010 to use new technical system i.e DEV-II ECC 6.0 for testing for a period and switch it back to DEV-I 4.7 technical system?
2) or change logitical system name of DEV-II ECC 6.0 and create new business sytem in SLD without interfering the existing setup and modify/create interfaces to use this new business system?
3) Do we need to refresh cache from time to time in XI ?
4) Any other implications
We will be upgrading XI to PI 7.1 after ECC 6. 0 Upgrade.
Any views on this would be highly appreciated.
Regards
Chandu

Hi
Technical System was created in the SLD automatically after RZ70 configuration in the new DEV-II system. We then modified Business System to use the new Technical system and carried out following steps:
1)     Original Idoc metadata was deleted from XID
2)     The port definition was deleted
3)     A new port definition was created for new system
4)     The metadata for each idoc type used was re-created in IDX2 , using METADATA -> CREATE
5)     This brought in all known versions of the idoc segments, including the 7.1 version.
I have already checked the guides suggested for our upgrade and we are thinking of going ahead with fresh installation and migrating the interfaces.
Regards
Chandu

Cad ver 8 NIC test for 802.1q support

Similar Messages

Maybe you are looking for