Cadencement boucle avec "wait until..."

Bonjour,
Ayant l'habitude de cadencer les boucles WHILE ou FOR avec l'outil "wait until ..." (voir image) ; le cadencement n'est pas/plus respecté suivant l'interval donné.
Quelqu'un a-t-il une explication ?
PS: passage de Labview 2010 à 2011 ....(???)
Merci d'avance.
Ludovic

Est-ce que le temps d'exécution de ton code est effectivement inférieur au temps défini sur le Wait Until??
D'autre part, bien que ts les exemples fournis par Ni ou écrits par nous meme soient codés de la meme manière que ton exemple, il ne s'agit pas d'une méthode correcte de cadencement.
Si l'on voulait vraiment respecter un cadencement précis, il faudrait utiliser une structure séquence déroulée et exécuter d'abord la fonction wait until, puis exécuter le reste du code de la boucle. Essayes cette solution pour voir si le cadencement est de nouveau respecté.
Cordialement,
Olivier L. | Certified LabVIEW Developer

Similar Messages

I am trying to authorise my new macbook air and it won't let me. I try to de-authorise all the other computers and it says I can only do this once a year and have to wait until the 7th Feb. It does not give me an option to authorise this computer

I am trying to authorise my new macbook air for i-tunes and it won't let me. I try to de-authorise all the other computers and it says I can only do this once a year and have to wait until the 7th Feb. It does not give me an option to authorise this computer

Always remember to 'de-authorize' you computer when selling or sending for service. If sending for repairs you might not get the same mother board or HD back and some how this counts as an authorized computer against your count.
MJ

Bought Premier Elements yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until

Bought Premier Elements 13 yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until my pw is recognized. Accept agreement. Agreement screen disappears and I'm back where I started. Try to open video clips with editor again and get the same demand to log in. Please advise asap. thx

Oldcameraman
Please do not duplicate a thread. The threads are answered as soon as possible. We are not Adobe. Just user to user.
I have answered your most recent of the duplicates
Premier Elements 13 Organizer Works. Editor doesn't. Log in doesn't work
It is uncertain just how far we can go to help you since you do not appear to have Premiere Elements any
longer.Seems you demanded a refund from Adobe Chat, got it, and now are left with a non purchased program which I
am not sure can be used.
Duplicates tend to confuse the person asking the question as well as those attempting to reply. As I suggested in the
above mentioned thread, try to sort out your situation with Adobe via its Adobe Chat.
ATR

No more than 1 sessions at a time are allowed. Please wait until open sessions expire.

I have been unable to log into my Actiontec MI424WR router this week, The router returns the message "No more than 1 sessions at a time are allowed. Please wait until open sessions expire." every time I try to log in. This has been going on for days. Even pulling the power to reboot it did no change. I'm the only user in the household that would log into it, so I don't understand how this could occur. How can I get in?
GLN2

I really don't want to do a hard reset as I have a handful of custon port forwarding rules that I had created. I'm not a wiz at that, so it would take me too much time to re-create! I may have no choice. Next time I can get in I will try the backup of the config file. I hope it contains the port forwarding rules.
The backup function should work fine, I have used it to save my Steam port forward rules to my hard drive, after a pin hole reset I was able to restore successfully. I did configure mine to 1 session & ALWAYS logout when I am done. I have never had any problems logging into the router. But in your case you may need more than 1 session allowed.
Are you using a native or 3rd party app to remember your router ID/password? IF you are do not do this, you are "defeating" the built in security of the router
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

Remote function module to wait untill the response came from webmethods

hi all.
here i have got a situation that the remote function module created in SAP-R/3 to wait untill the response came from webmethods :
i have created the remote function module by assigning one structure in tables(tab) and 3 parameters in changing tab just to collect the messages return from webmethods
so this rfc will be called by webmethods and pick the structure data and then it wll return 3 variables back to rfc.
here the rfc need to wait untill the response came from webmethods.
so can any body suggest me on what source code do i need to write in RFC

Hi Naina,
Normally RFC are synchronous, they do have return parameter as export parameter.
If return parameter is missing then , you can create Wrapper RFC.
Wrapper RFC:
It is nothing but you just create BAPI in SE37 transaction with Return parameter as export parameter and make it remote enabled by clicking on Radio button.
Under source code, CALL BAPI which XI has to call.
Thats it!
I hope this helps.
Let me know if any help required.

I am currently volunteering in Uganda, so data is precious. I can no longer afford unlimited data, I pay by MB/GB. All of a sudden Mail has stopped receiving. I wait until about 60meg, but no new mail. Using Gmail. Doctor says connected fine.

I am currently volunteering in Uganda, so data is precious. I can no longer afford unlimited data, I pay by MB/GB. All of a sudden Mail has stopped receiving. I wait until about 60meg, but no new mail. Using Gmail. Connectivity Doctor says connected fine. No probs there. And weirdly, when I want to send an email. I write it, it takes absolutely ages to try to send but as soon as I click disconnect it sends the email. Very odd. I would just love to be able to write all my emails offline and save to drafts/Outbox and then just connect to send and check emails then disconnect again.

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Yesterday I ran Disk Utility and came up with hundreds of permissions that needed repair. I hit the "repair permissions" button and waited until it said they were repaired, but just for fun I hit the v

Yesterday I ran Disk Utility and came up with hundreds of permissions that needed repair. I hit the "repair permissions" button and waited until it said they were repaired, but just for fun I hit the "verify permissions" button again, and they all came back! I did this several more times and every time I would hit "verify permissions" I would get the same list. What's up? I've always suspected diagnostic programs, but this is Apple's own!

Ignore them. They aren't errors. You will keep seeing the same ones. As long as you get the message "Permissions repair complete," you're OK.
http://support.apple.com/kb/TS1448?viewlocale=en_US

When the integral function is placed inside a wait until next ms multiple is it reset at the beginning of each loop?

When the integral function x(t) is placed inside a wait until next ms multiple while loop is the Integrator reset to zero every time the loop executes?

Hi,
the function works on a discrete amount of data. Hence every call to it replaces the values used first time around.
I've attached an example in LabVIEW 7.0 that uses a pulse generation vi to allow the manipulation of the array sent into the integral object, and then it's easy to calculate what the integral of the data would be.
Hope that helps
Sacha Emery
National Instruments (UK)
// it takes almost no time to rate an answer
Attachments:
integral.vi ‏39 KB

Creating a delay in labview until a c program completes in system exec.vi without using "wait until completeion"

I want to run two related C programs. The second one reads a text file that the first created. So I need to wait until the first is completed.
I use "system exec.vi" and I know I can set "wait until completeion" to true, but this way I won't see the screen and the C program announcments. Someone has an idea?

Hi Dror,
my idea: just wait for the text file created by the first C program. Check for the presence of this file (maybe using 'list directory') or check for the size of this file...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to wait until the 1st part of the processing is done

Hi,
I had a hard time to combine two parts of processing in one .vi file, and thus would like to get some advice/help through the forum.
Attached is the partial finished vi file I made. You can see that it is composed of two parts. The upper part is to run a bat file (check_result.bat), which generates a result.txt file. The lower part is to use the result.txt file as an input file, and check if the key word called "test case passed" is included in the result.txt file or not. So I want to run the upper part firstly, and then run the lower part after the upper part is finished.
However, I don't know how to connect the two parts in a right way that the lower part only starts running after the upper part is finished. Any comments/help is highly appreciated.
Thank you in advance.
Xuedong
Attachments:
question.vi ‏49 KB

The magic of dataflow!
All you need is a data dependency between the two parts. Often critical parts of each section contain error terminals, so you can just string em along in the proper order and each part must wait until the previous node has finished.
In your particular case, the read operation has no error input, so you can recruit any other input. Create a fake data dependency by strategically placing a small sequence frame containing common code. The sequence cannot start until all code that provides imputs has finished, serving your purpose.
Of course it seems silly to even try to read the file if the previous node failed. Right? So simply place the second part inside a case and hook it up to the error output. Now the second part (1) waits until the first part has finished AND (2) execute only of the first part succeeded. No sequence needed.
All clear?
Message Edited by altenbach on 02-07-2007 02:34 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
dataflow.gif ‏4 KB
dataflow2.gif ‏4 KB

File Adapter -- Picking has to wait untill it get fully loaded/write.

Hi All,
I need to pick the files from a folder and I need to pick the files only which has been written completely.
I should not pick the file in the middle while writing, I need to wait untill it finishes the writing completely.
Is there any setting I can put in Sender File adapter to do this?
Thanks
Seema

Nithya,
>> Try to increase the processing time in the sender communication channel, so that it allows you to completely load the file. Check the time which is needed to upload the file to the directory manually and correspondingly change the processing time.
We do not know exactly at what time the file will be placed in the folder. It may be at any time. So I cannot put the processing time accurately.
Aamir,
>> If you are picking from FTP,MSecs wont work there.the sender program which writes the file must write the file in some temporary format like .dat etc and once the file is complete it should change the filename to .txt,configure the sender file adapter to pick only *.txt files.
This is a good idea. But I don't think I can ask them to change at the other end as it is working previously with other middleware.
Guys,
Can you please advice which is the best thing we can do at this point of time.?
Thanks
Seema.

For all the folks who have to wait until Oct. 7

Yes, i am one of those guys who have to wait for my upgrade on October 7
How long do you think we are gonna have to wait to get the new iphone? its not looking very good for us, i've heard is gonna be something like 2-3 weeks, even a moth! what do you think?

Do you mean how long after you are eligible to order on the 7th? Or do you mean will you have to actually wait until then or will VZW be nice and let you order/purchase sooner? Like mentioned, it depends. If your local store(s) aren't sold out you may be able to just walk right in and purchase. There are a lot of people that aren't opting to pay full retail and so they'll take the loss of unlimited data and purchase on the 7th...which would mean a whole new "rush" of sorts that could cause delays. As far as how long will it take for you to receive it after you are able to order....depends on demand regardless of when you order. In general though, most people that preorder spend days stressing over the lack of tracking info...yet usually receive their device on or a day or so before the official release date. After that....it's hard to say. Just expect poor to slow communication as far as tracking info, shipping, etc....the last 2 iPhone releases seemed to be exactly the same on that issue.

Really want to buy an IQ800 - but wait until Windows 7?

Hi,
I REALLY want to buy a TouchSmart IQ800, but I was told to wait until Windows 7 comes out - that won't be for another 8 months!
I was also told that by that time, they probably will offer bigger CPU's, Memory, and Video Cards...
Any input would be greatly appreciated!
Thanks!

I've got the IQ810 TS, which is the United Kingdom version i presume, and have played with it so much despited being a novist with PC's, i can tell thats its a beauty to have one of these babies, and to retirate i'll call her my baby, its like a new toy or mobile phone you configure to a very satisfactory taste. I manager to creat a dual boot OS containing the Original Os that came from the manufacture, mirroring each other, reason is siimply to upgrade one of the OS to Window 7 whlie retainning the original sorfwares and drivers, my joy isn't just having the TS and what it potentially could do but the journey it took me to getting to where i am.
My advise would be, depending how urgently you like to have one, weigh the positive against the negative, having in mind when it come to computers, elctronics or TECHNOLOGY, its ALWAYS CHANGING, and as for window 7 RC if you decide to upgrade to, Window 7 will expire next year, by then MS would have released the window 7 for consumers to everyone.
Even with the wall mount i got as additional kit, i've left mine on a coffee table, better experience, accessiblity and conviences, to be honest i ffind it difficult to use anything smaller than a 25" screen or Window 7 with the multi touch, split screen for comparison, multimedia i.e t.v, 2D & 3D designs programs.
I think i've said enough, have fun like i did mate.......
Message Edited by Muteman on 05-23-2009 01:50 PM

Bluetooth connected phone call waits until the person answers to connect through speakers! How to change this.

When placing a bluetooth call the car shows that the phone is connected but there is no ringing (it is still ringing in the phone speaker). Then the person answers and it plays through the car speaker, but misses the first word. What is happening? I used to hear the phone ringing. Now it waits until the person answers.

This occurred when I updated the IOS to 8 and switched to an iphone 6 from a 5.
I read both articles and did not find a solution to my dilemma. To clarify further:
When hooked up through bluetooth to my 2011 Honda Accord
- incoming calls will ring the phone through the speakers and I can answer and speak through the speakers/car microphone by touching a switch on my steering wheel
- outgoing calls that I initiate by touching the phone number on the phone will ring in the phone until the person picks up, it then switches to the car speakers (unfortunately, the hand-off results in missing a word or two that the answering person has said). This did not work this way with my iphone 5 and ios 7.
I hope this is better communicated and there is an answer.
Thanks.

How can I wait until a Swing.Timer has finished?

I have a Swing.Timer runing which displays some animated text (more precisely it fades out a text with a delay of 50 until all characters are erased.
Afterwards a time consuming operation shall begin. How can I achieve that this operation waits to start until the text has been faded out? The time to fade out the text depends on the length of the text, of course.
So, how can I make the operation waiting until the Timer has finished its work?
Thanks,
Dirk

dirku wrote:
I have a Swing.Timer runing which displays some animated text (more precisely it fades out a text with a delay of 50 until all characters are erased.
Afterwards a time consuming operation shall begin. How can I achieve that this operation waits to start until the text has been faded out? The time to fade out the text depends on the length of the text, of course.
So, how can I make the operation waiting until the Timer has finished its work?I gave you an answer to this with sample code yesterday:
[http://forum.java.sun.com/thread.jspa?threadID=5294087&messageID=10244564#10244564|http://forum.java.sun.com/thread.jspa?threadID=5294087&messageID=10244564#10244564]
        public void actionPerformed(ActionEvent e)
            if (sb.length() > 0)
                sb.deleteCharAt(0);
                label.setText(sb.toString());
            else
                label.setForeground(color);
                label.setText(text);
                Timer timer = (Timer)e.getSource();
                timer.stop();
                // ***** start process here ***
        }The timer here continues until a condition is satisfied (here it's where the Stringbuffer that holds the text that is sent to the JLabel is empty). So all you have to do is place any code that needs to happen when the Timer ends in the else block. It's so simple as to be trivial.

Cadencemen​t boucle avec "wait until..."

Similar Messages

Maybe you are looking for

Cadencement boucle avec "wait until..."