CAF Designer Access Key required

Hi,
I have download and setup Netweaver Sneak Preview. But when I try to create a project in NWDS it asks for an Access Key.
Please let me know where can I get the Access key from ?
I am using NWDS 2.0.15.
Thanks
Mz

Hi Alex,
I am not sure about
1. which version of NWDS are you using.
2. what type of develop component (DC) based project are you trying to create.
Still please check if /thread/145824 [original link is broken] [original link is broken] for some great tutorials.
Regards
Nilay

Similar Messages

  • Change Extract structure -- Access key required ?

    Hi guys,
    I wanted to change the extract structure for one LO extractor. Just add one field from the available pool of fields. Is access key required for this ?
    Thanks,
    BWer

    You can't directly change the extraction structure without an Access Key, nor would you want to. Instead, go to SE11 and pull up the extraction structure you want to modify, in update mode, and then click on the Append Structure... button. You can add the columns of data that you wish to have on the DataSource there. After re-activating the structure, you should then be able to see the columns that you added in the maintenance view for the DataSource, pull them over, re-generate the DataSource and create the code in CMOD to populate these columns.

  • Does Access key required to implement explicit Enhancement point

    Hi All,
    Does Access key required to implement explicit Enhancement point in Function module or source code or etc.
    please clarify..
    thanks
    Bhanu

    Thanks for your reply Mr. Bala..
    I think i have not asked question correctly.. what i mean to ask is "to create the explicit enhancement point in the method(Source code), does ACCESS KEY required".
    Because when i tried to create enhancement point at IMPLICIT enhancement option system is allowing to create but when i tried to create at other than IMPLICIT enhancement option(in the mid of source code ) system is not allowed and displayed following message :
    "In this mode, you can create implementations only"
    waiting for your reply..
    Thanks
    Bhanu

  • Adding custom fields to VA01 additional data tab without access key

    I have to add custom fields at item level in transaction VA01/VA02.
    Is  access key required to add fields to additional data screen i.e 8459 ?
    Is there any way to do this without using access key ?

    Hi ,
    Try for any User Exit or BADI available for the tcodes.
    Here are exits for VA01 and VA02.
    Exit Name           Description
    SDTRM001            Reschedule schedule lines without a new ATP check
    V45A0001            Determine alternative materials for product selection
    V45A0002            Predefine sold-to party in sales document
    V45A0003            Collector for customer function modulpool MV45A
    V45A0004            Copy packing proposal
    V45E0001            Update the purchase order from the sales order
    V45E0002            Data transfer in procurement elements (PRreq., assembly)
    V45L0001            SD component supplier processing (customer enhancements)
    V45P0001            SD customer function for cross-company code sales
    V45S0001            Update sales document from configuration
    V45S0003            MRP-relevance for incomplete configuration
    V45S0004            Effectivity type in sales order
    V45W0001            SD Service Management: Forward Contract Data to Item
    V46H0001            SD Customer functions for resource-related billing
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
    Regards,
    Lakshman.

  • Is SAP Access Key same for edit of PCBURZ990??

    Dear Experts,
    I am new to payrol custome function (i.e pe04),after reading materials from this site,i started to develop payrol function but when i try to edit PCBURZ990  program in se38,i got access key required message and i entered same key which i got for abap development,but it is not accepting that key.
    So i want to know,is it possible abap developement and PCBURZ990  have differenet access key..
    Thanks & Regards
    Anwar

    Hi,
    Getting Access key for objects is usually the job of the Basis consultant/Project Admin.
    so contact them with the object name and the system installation number, they will get it for you.
    Regards
    Karthik D

  • CAF Designer Tool Access key:NDS

    Dear Collegues,
                 I am new to CAF,When i try to create CAF aplication using NDS,its asking for access key.
    How to get this access from SAP  & What is the process of getting this key and how to use this key.
    Regards
    chandra

    Hi Chandra,
    Check /thread/145824 [original link is broken].
    Regards,
    Christophe

  • How to search in BI 7.1 query designer for the required key figures & chars

    Hi All,
         Can anyone plz tell me how to search in BI 7.1 query designer for the required key figures & characteristics. I have the query being built on a multiprovider which has many cubes.
    So, i have a huge list of key figures and characteristics. I am not able to search for the required one by the name or the technical name.
    How can we search and pick the required object from the enormous list of the Mutliprovider in the Bex Query Designer??
    Thanks
    Phani

    There is not a search feature available. You have to do an educated guess under what dimension your infoobject could be and select.

  • Need CAF access key for NWDS

    Hello,
    I just installed the Sneak Preview of NW04SP16 and would like to start exploring GP and CAF.  I need an access key in order to start developing using NWDS.  Can anyone help me?
    Thanks in advance,
    Douglas Hanshaw

    Hi Douglas,
      You can mail directly to Jan Rauscher([email protected]) to get access key for NWDS.
    Regards,
    Vishal Gupta

  • CAF Access key

    Hello can i get an access key for the CAF?
    I have NW developer studio 2.0.9
    Thanks in advance
    RCV

    Hi,
    Try with NWDS 7.0  NWDS 7.1( with CE).
    Not sure whether CAF is supported with NWDS 2.09 or not.
    Regards,
    Piyush

  • We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required

    We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required to install. The apps have already been installed. The users cannot run them unless they are in the local admin group.Using "Run as admin" does not work. It gives the same error.
    I have opened a case with adobe support and was basically told to suck it up and put the users in the admin group. Actually, what was said was that it is "mandated that the users have administrative rights". 
    There are a couple of things wrong with this. It was working for both users until recently - a recent required creative cloud update. The users have never been local admins yet the apps were working (poorly, but working).
    We are in an enterprise environment and users simply do not have administrative rights on the computers.
    I have changed permissions on all adobe folders, granting users or authenticated users modify or full control rights, did the same in whatever Adobe registry HKLM keys I could find. Nothing has allowed the users to run the apps - unless they are put in the local admin group.
    Someone has to have a fix for this. Adobe apps have proved to have far too many vunerabilities to even entertain the idea of elevating user rights. I can't imagine that enterprise environments are allowing this.
    Any help or suggestions are greatly appreciated.

    Jeff,
    Thank you for your response. The users in question are "standard" domain users. We do not reduce users permissions below the standard level.
    The apps do not load with their current standard user permissions.
    The thing that makes this odd, is that up until recently they did this issue with cloud apps. The only way I can make it work for them now is to put them in the local administrator group on their pc's - which is not going to happen.
    This is what they now see. As I said before, this was not a problem up until recently they would see all their available apps. If I put them in the local admin group the apps are listed without having to install. Everything is there, just not accessible to the user.

  • Combine two reports in query designer using key figure with sap exit

    Hi experts,
    i want to combine two reports in query designer using key figure with sap exit
    in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
    to calculate due and not due in two columns
    in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
    to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
    now i have requirement like this
    not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
    or
    not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
    thank you

    Hi Dirk,
    you perhaps know my requirement,
    for the management to make used in one report,
    we have in reporting finacials Ehp3.
    Vendor Due Date Analysis - which show due, not due
    Vendor Overdue Analysis - show only due and analysis in time grid frame
    i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
    krish...

  • What are the key requirements to write a recursive cte?

    what are the key requirements to write a recursive cte?
    when we will go for a recursive cte.

    A common table expression (CTE) can be thought of as a temporary result set that is defined within the execution scope of a single SELECT, INSERT, UPDATE, DELETE, or CREATE VIEW statement. A CTE is similar to a derived table in that it is not stored as an
    object and lasts only for the duration of the query. Unlike a derived table, a CTE can be self-referencing and can be referenced multiple times in the same query.
    A CTE can be used to:
    Create a recursive query. For more information, see https://technet.microsoft.com/en-us/library/ms186243%28v=sql.105%29.aspx
    Substitute for a view when the general use of a view is not required; that is, you do not have to store the definition in metadata.
    Enable grouping by a column that is derived from a scalar subselect, or a function that is either not deterministic or has external access.
    Reference the resulting table multiple times in the same statement.
    Source : https://technet.microsoft.com/en-us/library/ms190766%28v=sql.105%29.aspx

  • "Access Key" to activate domain "P106_AMT11" in ABAP Dictionary

    Hello folks.
    I tried to activate domain "P106_AMT11" in ABAP Dictionary.
    But Netweaver requires "Access key".
    How can I obtain it?
    I've checked some threads on "access key".
    Some people wrote "ask Basis Consultant".
    But I'm not acquainted with any Basis Consultants.
    Could someone please help me to get an "access key"?

    Hello,
    Every S user id may not have the authorization to generate the object key. Its a task of "Basis administrator", they generally have the authorization to generate the object access key.
    If your S user ID has the necessary authorization, then
    Go to https://service.sap.com/sscr > Register Object
    You have to give the below information while doing the object registration.
    Basis Release = <select your release version>
    PgmID = R3TR
    Type = DOMA
    Object name = P106_AMT11
    - Select the correct installation # under the "select installation"
    Note - SSCR developer or object key depends on the installation, the correct installation no. of your system.
    You can follow the below note for more details.
    https://service.sap.com/sap/support/notes/40850
    Regards,
    Debasis.
    Edited by: Debasis Sahoo on Oct 15, 2008 3:12 PM

  • Can we control order of cycling when use same access key in multiple locations

    Hi,
    I'm using Jdev 11.1.1.6, IE 9, Firefox 24.0.
    I have created simple jspx page having two buttons, named Add and Close. Close button has got access key as C. When click on Add button I'm calling a <af:popup> and that popup contains two buttons Submit and Cancel. Cancel button has got access key as C. Basically in one jspx file I have got two button using same access key. At runtime those buttons will display one in page and one in popup. 
    In IE: it works fine. When I do access key on popup it will close down the popup.
    In Firefox: it will first focus to the button on the page. When I access the same key for the second time it will set the focus to button on popup and will not execute the action.
    If I'm using different letters it will perform the action in firefox and IE both. In my requirement I need to use the same letter.
    I read in oracle documentation "If the same accessKey appears in multiple locations in the same page of output, the rendering user agent will cycle among the elements accessed by the similar keys.". So it seems to be an expected behaviour.
    My question is: Can we control the order of cycling. i.e. If we do access key on popup, can we first focus on the button in popup instead of button on the page in firefox.?
    Greatly appreciate your ideas.
    Thanks.

    Hi,
    unfortunately yes, the cycling behavior is up to the browser.
    Frank

  • Access Keys not blocked when popup is open

    Hi,
    We are using Jdeveloper 11.1.1.4 and we have the requirement to add access keys on specific buttons in our application.
    When a popup is open the background page is disabled and the user cannot click on buttons outside the popup.
    If however a button in the background has an access key and the user uses it, the action gets executed.
    Is this a bug? does anyone know of a workaround in order to block the access keys in the background when a popup is open?
    Gabriel.

    Hi,
    We got an answer from Oracle support... not the one we were hoping for though:
    "the Development team confirming that _the issue is not a defect_. We have an Enhancement Request 10170506 logged for the issue to be _considered_ by Development in the future releases......."
    The access keys functionality is a high priority for our clients and this is going to be a serious issue for us.

Maybe you are looking for