"CAHeadless Debug Event" Error message

I have Adobe Photoshop Elements 9.0 installed on my Windows 7 computer and have recently started getting a message that I believe may be associated with that program. The message reads "CAHeadless Debug Event" "CAHeadless has encountered an error - [..\..\Src\DataManager.cpp-410]"
Does anyone know what may be causing this message and how to cure it. I am able to click the Continue button and everything works as it should but it is a little annoying.
Thanks
Patrick
Message title was edited by: Brett N

I am also having the same CAHeadless Debug error on PSE 9.
Switching catalogs does not help.
Turning off face recognition does not help.
I have looked through the forums and on the internet and it seems that this is a common problem for PSE 7, PSE 8, and now PSE 9.
Does anyone have a solution?

Similar Messages

Can uninstalling and installing CS4 fix the debug event error message?

Hello,
Can uninstalling and installing cs4 solve the debug event error message?

Can uninstalling and installing cs4 solve the debug event error message?
Well, that DOES seem to be the scripted mantra of Adobe TS in some out of the way country. According to most reports, that cures everything from trying to Capture over a USB cable to working with footage from your cellphone camera. In most cases, it has cured very little, though maybe the Debug Event error IS something that will be fixed by this.
Good luck,
Hunt

"CAHeadless Debug Event" Error

Greetings,
I am getting the following error popping up in a dialog box about every five minutes:
CAHeadless Debug Event
CAHeadless has encountered an error.
[..\..\Src\Clip\VideoClip.cpp-276]
I have to click "Continue" to make it going away temporarily.
As a workaround, if I click Edit > Preferences > Media-Analysis, and clear the "Analyze Media for Smart Tags Automatically" box, the errors stop. But I was wondering if here was an actual fix for this error, instead of just a work-around which I discovered.
Thanks,
Shane.
Photoshop Elements 11.0
Windows 7 Home Premium SP1 64-bit
Message was edited by: c_Shane

They don't take up much space—but since I installed version 11 there has been a lot of weird and strange behaviour, and I'm just trying to figure out what's causing it.
I deleted psa.prf, restarted PSE, and re-selected my preferences. Unfortunately, I'm still getting the error.
I notice that when I click Edit > Preferences > Media-Analysis, and click "Analyze Media for Smart Tags Automatically", a process called "ElementsAutoAnalyzer.exe" starts, and I start getting the error. When I clear "Analyze Media for Smart Tags Automatically", the "ElementsAutoAnalyzer.exe" process ends, and the error messages stop.
I'm guessing the only work-around is to not use this feature.
Shane.

Problem with PSE9 - Receiving message window - CAHeadless Debuger Event.

In my last request for Technical support (Case # : 0181931685), I have 2 problems. One about inability to remove PSE9 and reinstalling was corrected by following instructions from Tech.Support. The second problem is still with me. The message window CAHeadless Debuger Event is poping up with the message ...\...\Src\DataManager.cpp-410. The window is having one button <Continue>. When I press the Continue button, everithing work and look OK until next time the windows pop-ups. The computer is new Dell Studio 8100 running OS Windows 7 Home Premium 64. Originaly I started using PSE9 on old Dell with Windows 7 Home premium 32 without any problem. Any advice how to stop this un-plessant message comming?
Thanks a lot! George.

Hi all,
this case is closed it was catalog issue. I corrected this by creating new catalog and importing pictures from hard drive. All is now correct.
George

CAHeadless Debug Event for Adobe Photoshop Elements 12

I am getting this error periodically (every 5 min or so).
What is interesting is that Adobe Photoshop Elements 12 is not even open and yet the following error appears:
The error window is named "CAHeadless Debug Event"
Inside the window it says;
CAHeadless has encountered an error.
[..\..\Src\VideoFrameFactory.cpp-233]
My machine:
Windows 7 Home Premium Service Pack 1
Manufacturer: iBUYPOWER Computers
Processor: Intel(R) Core (TM) i7 CPU [email protected] GHZ 2.83 GHZ
12.0 Gig Ram
64-bit Operating System
Help?
-Hppysnshn

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues. Here is a link to a page with options near the bottom to help make contact:
http://helpx.adobe.com/contact.html?step=CCSN_downloading-installing-setting-up_licensing- activation_stillNeedHelp

Pro Debug Event - Error 290 /tick time

Suddenly a project I was working (and all the auto-saved folders) could not open anymore by giving me the following message: "Pro Debug Event - error 290 tick time"

Whenever you enounter an error, as a general rule, search the forum to see if it's already been addressed, or to join the discussion:
TickTime.cpp-290 error after opening a specific project | Premiere CC 2014.2 | Windows 8.1
Also, I always convert/ingest my media to use the same format that runs natively in PPro and does not require conforming.
Second, with regards to losing work with projects that can't be fixed. I always save my projects incrementally to new names as I go. When I hit an issue that cannot be resolved (and occasionally I do), I reopen the previously saved project and try something else. In fact today I hit a stack error. It was a three-day edit, and I was on version "(project name)_028.prproj" I just opened up the previous version "..._027.prproj", repeated the few edits that I lost in "028" and rendered without error. Follow that?
Anyway, read the link above for a possible fix.

Debug Event Error

About two weeks I asked for help. Hunt kindly responded with a request that if it happened again I am to give him certain information. I tried to do so by replying to his email, but for some reason it is being returned as undeliverable, so here are the basic messges again:
Quite frequently, I receive the following error message:
Premiere Elements Debug Event.
Premiere Elements has encountered an error.
[..\..\src\PlatformWindowsManager\PlatformWindowsManager.cpp-132]
The only option presented is a button which, if clicked on, exits the application without saving the content.
What is happening here? Obviously, this becomes very aggravating after a while.
Many thanks.
Walter
And here is the email I could not send to Hunt:
Hi Hunt,
Its happened again. Here are the events.
I had been capturing files from my DV video camera for about 3 hours. After each capture, I saved the captured file, opened a new file (not necessarily in the same folder) and started another capture.
I had just completed a capture and saved it and moved the timeline slider to be able to check one of the scenes (I don't remember if I actually pressed the Play button.) when the message appeared again. As before, when I clicked on "continue" the app shut down.
My assets are:
Processor: 2.40 gigahertz Intel Core2 Quad Q6600, 64 kilobyte primary memory cache, 4096 kilobyte secondary memory cache
Memory: 3072 Megabytes Installed Memory, Slot 'DIMM0' has 1024 MB, Slot 'DIMM2' has 2048 MB
Main Circuit Board: ASUSTeK Computer INC. P5K-E Rev 1.xx, Serial Number: MS1C81BP5K01234, Bus Clock: 266 megahertz, BIOS: American Megatrends Inc. 0906 12/10/2007
Drives: 1550.33 Gigabytes Usable Hard Drive Capacity, 1195.40 Gigabytes Hard Drive Free Space
           HL-DT-ST DVDRAM GSA-H10N SCSI CdRom Device [CD-ROM drive]
           3.5" format removeable media [Floppy drive]
           Canon MP Memory Card USB Device [Hard drive] -- drive 2
           Maxtor OneTouch II USB Device [Hard drive] (300.08 GB) -- drive 3
           ST3500320AS [Hard drive] (500.11 GB) -- drive 0 (C Drive)
           ST3750330AS [Hard drive] (750.15 GB) -- drive 1
OS: Windows XP Home Edition Service Pack 3 (build 2600)
Display: ATI Radeon HD 3800 Series [Display adapter], ViewSonic VP930 Series [Monitor] (19.3"vis, s/n PQ8053603156, September 2005)
MultiMedia: ATI Function Driver for High Definition Audio - ATI AA01, Panasonic DVC Web Camera, SoundMAX Integrated Digital HD Audio
I hope this will help - many thanks
Regards,
Walter

Walter,
I would assume that the e-mail notification feature is the little notice of a new reply to a post, that has been checked with the e-mail notification. To contact me, either the e'dress in my Profile, or an Adobe PM (Personal Message) sent from my Profile should reach me.
Now, with your error message, go to the Event Viewer (located in a couple of different places, depending on one's OS), but usually in the \\\System32 folder. It's also accessible from Programs>Utilities [?]. I have a shortcut on my Desktop, the moment that I get a new computer, so I'll have to look for it specifically, and then can only tell you where it is in XP-Pro SP3 - file name = eventvwr.exe.
In its opening screen, you'll see two windows. Look to the left and find "Application," and "System." Dbl-click on Application first, and you'll see a long list of programs and Processes. Scroll down, until you see some yellow triangles, and red circles with a white X. The name will begin with "Error," while the yellow triangles will read "Warning." Find some of these around the time/date as your crash. Dbl-click on each to get a dialog box. There may be useful info in there, but if there are any links, please follow those and read very carefully. Much can be contained in those links.
You might be better to do this, as soon as the program has thrown the error, and crashed. Then, you do not have to search down into the lists. Also do this for System, as well.
Doing this might lead to some clues into your mystery.
Screen-cap of Event Viewer:
Good luck,
Hunt

PE 11 new install on WinXP system - Debug event error, can't open program

Hi everyone,
I searched the community for similar errors and followed a couple of troubleshooting steps suggested for older versions of PE, but they didn't work. I just installed Premiere Element 11 on my Windows XP office desktop (also installed PS Elements 11, which works without a problem.) Install went well and I rebooted the system as prompted. Every time I attempt to open Premiere however (I am not attempting to load any video files, I just want to open the program to start a new project), I get the splash screen at first, but after a few seconds of "Loading" and/or "Initializing" a bunch of parameters, the program hangs and following screen pops up:
"Premiere Element Debug Event"
Premiere Element has encountered an error.
[..\..\Src\Core\Preferences.ccp-338]
Continue
When I click on "Continue" the following window pops up:
"Microsoft Visual C++ Runtime Library"
Runtime Error!
Program: ..e\Adobe Premiere Elements 11\Adobe Premiere Elements.exe
The application has requested the Runtime to terminate in an unusual way.
Please contact the application's support team for more information.
OK
So, here I am support team... Need more information, lol. I will also add that clicking the OK after the second window pops up often doesn't close the Premiere splash window still visible in the background, I have to CTRL-ALT-DEL and kill it manually by ending the process in Task Manager.
I installed the same program - same s/n - on my home computer as well, with no issues (that's a much newer, and much faster, Windows 8.1 system however.) I think you are entitled to install 2 copies though, right? So this wouldn't be related to too many attempts to register the same software?
Thanks for any help.

umbertob
Wea re not Adobe. We are Premiere Elements users who visit here under our own free will (unscheduled) to help other Premiere Elements users with their Premiere Elements workflows.
Please detail the resources of your Windows XP computer. What edition is it...professional, home premium, or other? You realize come April 2014 Microsoft will discontinue support for Windows XP. Apparently you can continue to use it, but Microsoft points to security risks in that state.
a. how much installed RAM, how much available
b. how much free hard drive space
c. is the video card/graphics card used by the computer up to date according to the web site of the manufacturer of the video card/graphics card.
Did you install the program to the computer default location according to the installation process?
Please review and then we can discuss the details.
Thank you.
ATR

I have an ibook M6497 and at power on i recieve an extensive list of debug dump error message, WHAT DO I DO?

here is the error message,
no debugger configured - dumping debug info
MSR=00001030
latest stack backtrace for cpu 0:
     backtrace:
          0x000954F8 0x00095BF8 0x00026898 0x02E1EC4 0x002C12A0 0x002C1068 0x002C1AD0 0x002C20DC 0x000A9714
Procedding back via exception chain:
     exception state (sv=0x00A41500)
          PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (unknown)
kernel version:
darwin kernel version 8.11.0: Wed oct 10 18:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic: were hanging on here...

First guess: It seems that your operating system OSX 10.4 Tiger on that iBook is broken. Try to re-install with original OSX 10.4 Tiger DVD (archive and install feature to keep the data if necessary)

Debug unknow error message followed by shut down when attempting to render nested timeline

My specs:
AMD64 x2 Athlon 4600+
ASUS M2N-SLI Deluxe motherboard
2 RAID 0 hard drive (1 TB and one 500 GB) SATA2
1 SATA2 C: drive of 160 GB
4 GB of DDR2 RAM
MATROX APVe
Dual Monitors (with Ultramon)
Windows XP Pro
Premiere Pro CS3 using AspectHd v5.0 build 88
My PP3 gives me an unkonwn error message in a debug window everytime I try to render my timeline that has one 2 seconds clip of another nested sequence...!?!
It occurs at about a fifth of the 1st of 2 audio preview render that it has to do.
I usualy did have problem rendering file with PP2 cause of Premiere's system memory bug, but never I've add trouble before in PP3...until well now.
What is the problem? Anybody experiencing that bug also?

The project in which this problem occurs is about 1 TB of footage in AspectHD Low HD; there's 37 tape captured in batch and recomposed on a different sequence for each tape to compensate for the lost of timecode when digitazing with CINEFORM (so 37 nested time line).
I use those nested timelines as if I was picking shots from a huge clip that captured the whole tape.
Of course Premiere ask me the render the sequences nested in addition to the main one in which I edit footage...
I'm currently editing a trailer and wanted to render 2 clip that were sampled from 2 different sequences, but PP3 has the bug windows at 10,51% and closes. The text in the debug window is that "Adobe Premiere Pro CS3 has encountered a problem and needs to close. Sorry about..."
If you need anymore info please ask what specificaly, cause I would be at a lost to add more...:)

Premiere Pro Debug Event Error

When loading Adobe Premiere CS4 I get an error message.
"Premiere Pro has encountered an error.
[..\..\Src\ImporterProcessClient.cpp-127]"
I have windows 7 Proffesional 64bit operating system. And the CS4 student edition.

Thank you sir. Seeing that two Adobe experts suggested the same thing, I went ahead and sliced and diced, narrowing the sequence down to a single problematic .MOV file. I went to the original project, and replaced the file with the same video file and it worked! So the issue was a corrupt file link from it's folder to the Premiere project.
The problem is now solved!
Michael

PSE 9 and CAHeadless Debug Event??

PS: Have tried to HOLD down 'Shift, Control and Shift' whilst launching Orgnizer as suggested in a previous forum and ALL IT WAS LAUNCH CA HEADLESS BEBUG EVENT Again. Msg always states 'CAHeadless has encountered an error:' [..\..\Src\DataManager.cpp-410]. ???

See if that helps (deleting organizer preferences / turnining autoanalyzer off) :
http://forums.adobe.com/message/5021448

Can stop a deleted event error message pop up from recurring.

Can send screen shot but the PC version of ask question fails to up load the word doc which has the screen shot image in it. The down load wheel just runs continuously with out stopping

erosario2010 wrote:
Has anyone got this message pop-up? Is states the following:
An unexpected erros has occurr that this application cannot recover from. It will now close.
Exception Type: Class RException
Additional Information: CNotification Service Poller Thred-Run
What: Failed to create dir
C/Users/verizon/roaming...ect.
Some one please help. I contacted customer service and was told that i have a virus. I went into my security suite and deleted a bunch of "Trojan" files that were detected as viruses, and i still get this pop-up. Please, if someone knows how i can fix this myself please let me know.
Thank You!
What virus protection are you using? I use Avast free version. Also make sure your signature files are updates.
Also scan for spyware. Good software malwarebytes.
After you make use you have these installed, run you computer in safe mode while scanning.

After Effects Debug Event error [..\..\Src\Win\AsioHost.ccp-885]

anyone knows how to fix this , everytime i do a ram preview it freezes and gives me this error and it comesback and does it again
I have rebooted many times, cleaned the Cache Purged, removed unused footage etc

meaning decrease the layer size in order to make it work?
with my system
Windows Vista Ultimate 64bit (service pack2)
Dell Precision T7400
Intel Xeon Cpu x5472 @3.00GHz 2.99Ghz (2 processors) quad cores
8GB RAM
Adobe Master Collection CS4
how much ram do i let after effects use ?
this is how i have it set up
if these settings are wrong withing my machine can any of you let me know what will be the correct set up for it?

Compressor 2.3.1 Cannot submit batch error message What is causing this?

Just installed FCP 5 with DVD Studio pro 4 and Compressor 2 and tried to do a batch compression exported from FCP, I selected the compression I wanted and chose my destination and clicked submit and I get this error message "Cannot submit batch Unable to connect to background process" I did try to Reset Background Processing and it did not make a difference, any suggestions would be appreciated.

The 1009 error indicates that one of the objects being targeted by your code is out of scope. This could mean that the object....
- is declared but not instantiated
- doesn't have an instance name (or the instance name is mispelled)
- does not exist in the frame where that code is trying to talk to it
- is animated into place but is not assigned instance names in every keyframe for it
- is one of two or more consecutive keyframes of the same objects with no name assigned in the preceding frame(s).
If you go into your Publish Settings Flash section and select the option to Permit debugging, your error message should have a line number following the frame number which will help you isolate which object is involved.

"CAHeadless Debug Event" Error message

Similar Messages

Maybe you are looking for