Cairo-Dock - Dual Monitors

Hey guys,
Is there any way to move the dock between screens. Its stuck on my 2nd monitor, and i cant do anything to get it elsewhere. (or even active on both monitors)
I have an ATI card, and am using the proprietary drivers. If you need any more info, please let me know.
Thanks!

Please do not bump threads. It is against the forum rules. Especially when you have not exactly provided a wealth of information which might allow anybody to help in the first place. You say that you "can't do anything", for example, but do not explain what, if anything, you have tried.

Similar Messages

T420s dock - dual monitors?

looking to do dual monitors (laptop lcd not included) with my t420s and was wondering if the dock will give me the ability to do that? thanks!
Solved!
Go to Solution.

Hi, kaitanium
I browsed the Lenovo website and found these docking stations compatible with your system. The Mini Dock and the Mini Dock plus should both allow two video ports to be used simultaneously to create seperate displays. The Mini Dock plus has the capability to show three displays if the hardware in the computer meets the specs. So, yes, two seperate displays is possible with the correct dock.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Question about dual-monitor setup - advanced dock + PCIe card

I just got a Z60t at work. I had been using a dual monitor setup, but it doesn't look like my current config is going to fly w/ the new machine. Anyway, here's what I've got:
Primary monitor: Acer AL2416W (1920x1200 DVI)
Secondary monitor: Dell 1901FP (1280x1024 VGA)
I've read that the advanced dock might be able to let me use this setup with the Z60t if i put a PCIe video card in it. So here are my questions:
1. Will the advanced dock + PCIe video card allow me to run the two monitors listed above (I don't use the laptop screen at all)?
2. Which PCIe cards are compatible with the advanced dock?
3. Can I achieve the same resolutions with the advanced dock + PCIe card?
4. Will I need to split the VGA output, or can i use VGA + DVI like I do now (since the Z60t has no native DVI support)?
thanks!

Gary -- don't turn on the OS Display Mirroring. Turn it off.
You want Aperture to control how it uses your dual monitors. (You do not want the OS to determine it.)
Once you've turned off the OS "Display Mirroring", the set-up I specified above should give you what you want.
That set-up is:
"View → Main Viewer → {anything}", and
"View → Secondary Viewer → Alternate"
You must have the Viewer active (not the Browser) in order to change the "Secondary Viewer" setting. If you are in the Browser, activate the Viewer by double-clicking an Image.
Let me know if that doesn't work.

How do I connect dual monitors to my x61 with docking?

How do I connect dual monitors to my X61 with docking?

There are some ideas in this thread
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Can't get dual monitors to come back up when docking. T500 with mini dock & XP

I have a T500 with XP installed. I am using it docked into a mini dock attached to two 20inch Viewsonic monitors. One connected via VGA and the other DVI. I setup the dual monitors just fine. Anytime after I undock and boot up the laptop I can't get the dual monitors to automatically display. I have to go into the display properties and re set it up each time. Can anyone suggest any ideas?

When your T500 power-on , press F1 to log in BIOS, and change the option in >config>Display>Boot-Display-Device to Both or VGA, I suppose that it will reslove your problem.

T60p and dock station: can't do the dual monitors

hi gurus:
i have a t60p and a mini dock station. the docking station seems to be working fine execept the problems with dual-monitor function.
1) for some reasons, the laptop lcd always shows up as screen 2 instead of default screen 1
2) tried to monkey around the settings and got messages claimed that i don't have administrative rights to change... blah, blah (i am the sole person using this laptop and i am the administrator).
any idea?
any help will be greatly appreciated.
thanks
_dave

Hi Paul,
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Docked X60 - Dual Monitor question

Hi All !
I have an X60 docked on an X6 Ultrabase...I'd like to run a couple of HP 1740 TFT monitors off the laptop (without the integrated screen operational) in the usual FN + F7 fashion.
I thought I might be able to use one of these to split the output and run up both monitors in parallel ? Will this work and detect the dual monitor real estate or do i have no choice but to go with one of these
Hope you have some advice ?
Cheers
Scott

scott_b, welcome to the forum,
I think you'll find your answer in this thread
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

T61p dual monitor with docking station, maximum resolution

I wonder what is the maximal resolution one can get with the quadro fx 570m. I specially want to reach the 2560x1600+2560x1600 with two 30'' monitors. Does anyone know about it or have experience with it?
dual monitor with docking station

You will need the huge docking station with Dual-Display Port & DVI. Then it should work, but you will only be able to use 2 displays at once (one external+laptop LCD or 2 external). But I think you already know that.
VGA on such resolution would be suicidal and i doubt it would even work.
ThinkPad T61p | 15,4 WSXGA+ | Intel Core2Duo T9300 2.5GHz | 4GB CL4 DDR2 RAM | nVidia Quadro FX 570M | Win7 Ultimate x64

Menu bar shows twice on dual monitor, dock moves around

Mac Pro (early 2008) w/ Yosemite and dual monitor display
The menu bar at the top of the screen appears on BOTH monitors ALL the time. However, the one on the secondary monitor is dimmed out, and can be two or three app switches behind. For example, awhile ago I worked in Illustrator, and the Illustrator menu bar is visible in the second monitor (but dimmed). On the main monitor I have been in several apps since, but currently it is showing Firefox. If I mouse click on that dimmed out menu it will go right to Illustrator - and the Illustrator menu will appear on BOTH monitors. It will remain this way until switching to another app which has palettes on the second monitor, so just now I went to InDesign, and now that menu bar is visible. Also visible are the usual items in the right part of the menu, such as the time.
The Dock can also switch monitors, but that has only happened once.
Finally, but I think related. When in Adobe apps, with all the palettes located in the second monitor, when I click on something which should pop up more choices (anything in the character palette) - sometimes the pop-up will appear all the way across both screens, and on the main monitor. That is a ridiculous pain.
Other than that the system seems stable, and the apps do work. I did go back down to one desktop in spaces, but that seems to make no difference. Ideas ???

In my preferences - NONE of the check boxes are checked. I did check the mirror displays one earlier today, but that is not the answer.
Right now on my main monitor I have Firefox in the top menu, and the dock in the bottom, on the secondary monitor, it shows Photoshop main menu dimmed out. If I click on a Photoshop command in that menu, it immediately goes to the program.
iTunes is open, I just moved the main window over to that second monitor, now I can see both this Firefox screen and the Firefox menu, but now on the secondary monitor I see the iTunes window -- and the iTunes main menu is visible but dimmed in the second monitor.
I honestly don't think this is intended. It is certainly not helpful. The second monitor seems to remember whatever was open there last. Weird. I have used 2 monitors for YEARS, not seen that one before.

T440 - dual monitors without dock, using VGA and mini DP

Try to find out if a T440 can use its VGA and mini DP ports at the same time for dual monitor support (LCD can be closed.) Can't seem to find this info anywhere, everything I come up against talks about a dock.
Thanks.

There are "features" having to do with the amount of power supplied to run the adapters on the 5770 and 5870.
I suggest you use one DVI-to-VGA adapter for your best display. These VGA signals are present on the DVI-I output from the computer -- in the bar at one end and the four pins around it. The adapter used for this is just wires.
The longer story has to do with using much more expensive ACTIVE, Powered adapters, some even use a USB pigtail to pick up power from a USB to run signal drivers inside the adapters. These are Required to run three displays, but you can Usually get away with it for two.

Laptop - Docking and Dual Monitors

Hi there,
I have a personal HP Dv4t Laptop, work has purchased for me a an Elitebook with docking station and dual monitors - I am trying to figure out when I am using my personal non work PC how to now connect this Laptop to least one of the monitors.
I have a single dongle connected to the docking staition for one monitor, but it's too short and only a single one and not to able attached to my personal laptop.
I know it's probably pretty easy if you are use to configuriung, but I am not. Any help is appreciated.
Thanks,
Eileencat

Hi ecat,
I wanted the product number so that I could check the specs on your notebook to see what ports you have on your notebook. However, your model is a CTO which means Custom to Order so I can't pull up the specs.
This HP document Using Two or More Monitors with One Computer will show you the types of video connections and how to extend the desktop. This will be a guideline to show you how to setup the external monitor.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Dual Monitor Startup Problem on MacPro - Solved

I have a model 53135LL/A = mid 2010 MacPro with 8 cores, DUAL monitor cards and monitors, 24GB memory, running Lion 10.7.3. It is important to note that I am also using the Apple bluetooth Magic Mouse and the smaller, bluetooth keyboard (no numeric keypad). This unit was supplied with Lion in December 2011 and has had a startup problem from the beginning as follows:
1 - when starting from a cold start the dual monitor positions are reversed from the correct position
2 - additionally the USB and firewire connected devices (e.g. Wacom tablet, 2 card readers) do not function properly.
The workaround for me has been to start the system, wait for the logon screen, then click restart. Upon restart everything comes up and functions correctly.
Specifics on my setup and starting problems:
1 - My main monitor (Monitor #2) is a large gamut monitor that is located to the right. This monitor is connected to card slot 1 as that is the faster card slot (pcx16). The second monitor (Monitor #1) is an ordinary unit and connected to card slot 2 (pcx4). The monitors are set up as an extended desktop.
2. The Wacom tablet (Intuous 3 wide) is connected to USB port on rear of machine. CF card reader by Delkin is connected to Firewire on rear of machine, and an SD card reader is connected to USB on the rear of the machine.
3. My dock is positioned on the left side of the left monitor. The menu bar is along the top of the left monitor, and all desktop icons are on the left monitor. The right monitor has no items on it.
On a typical cold start, as mentioned above, the apple logo appears on the right and then the logon screen appears on the right.
If I proceed to logon at that point, all the desktop items move to the right monitor and the computer thinks the positions are reversed. In other words, it behaves as though the right monitor (#2) is on the left of the desktop and left monitor (#1) is on the right.
Additionally, the Wacom tablet using either pen or mouse does not map over the full desktop range. If I use either card reader and then eject the card, no further card insertions will be recognized.
To fix this, I simply restart the machine thru the apple menu and everything comes up correctly.
I had discovered, that instead of completing the logon on a bad cold start, I could simply restart from the logon screen and all would work correctly.
On occasion, the logon screen would come up on the left monitor (as it should do) and in that case, if I log on all works correctly.
I have worked with Apple support on the phone, clearing setup ram etc. Have had the unit in to Apple store for hardware check, all OK. Next suggestion was reload OS and start over - no thanks.
SO - Here is the latest.
If I turn off my keyboard and mouse before starting the machine, then wait for the logon screen to appear - It starts correctly, with the logon screen on the left. I can then turn on my keyboard and mouse and all works as it should.
Bottom line - there appears to be a startup issue with Bluetooth devices from a cold start. Note that once the machine has been used for a bit, I can turn it off for short periods of time (e.g. 30 minutes) and it will start correctly even with the mouse and keyboard turned on.

mkaito wrote:
That's how dwm behaves. I believe dwm's multihead support is rather lackluster out of the box. You might want to check out some of the patches they have, and ask around in the dwm hackers thread.
I currently have dwm simply draw status on all monitors, but I'm investigating separate status bars per monitor. We'll see where that takes me. Dwm is a tinker's WM!
i found the patch , thanks!

Dual monitor setup MBA 2013

Hello Everyone,
This is my first post on the Apple Support Community.
Nice to meet al of you!
System information:
Macbook Air medio 2013
Model MacBookAir6,2
Intel Core i7 1,7GHZ
8GB
512GB SSD
I am wondering if it is possible to have a dual monitor setup using the thunderbolt feature daisy-chain.
The configuration i am looking for is:
MBA --> Belkin Thunderbolt™ Express Dock (for using gigabit ethernet) --> Dell U2414H --> Dell U2414H
Specs:
Belkin Thunderbolt™ Express Dock = http://www.belkin.com/us/p/P-F4U055/
Dell U2414H = http://accessories.us.dell.com/sna/productdetail.aspx?c=us&cs=04&l=en&sku=860-BB CG
Do i have a chance this could work?
I'm looking forward to hearing from you all.
Thanks!
Kind regards,
Njamo187

Hello,
I had the same problem with a nVidia GT120 card (2009 Mac Pro standard). OSX wouldn't show the gray screen on the 3090, even when it was connected alone (to the DVI port). Also, the login screen would always revert to the secondary display (connected thru the mini display port to DVI adapter).
After login, all was well.
Now I've solved the problem with an nVidia GTX 285 card. The 3090 is connected to the n.1 DVI port and the secondary display (a 1600x1200 Eizo L997) to the n.2 DVI port, and the Mac Pro boots correctly on the 3090 (gray screen and everything, at full 2560x1600 resolution).
Note that the first time I booted up the Mac after replacing the GT120 with the GTX 285 I had the same problem, and solved it by disconnecting the secondary display and then rebooting with the 3090 alone. Now everything works as it should.
Dont't know if there is a bug somewhere (EFI, maybe) of if the GT120 and your ATI are simply unable to work at full resolution before OSX desktop loading.

AMD/ATI driver problems on a Dell laptop with attached dual monitors

I have a Dell Precision M4800 laptop with a docking station for two additional monitors. I'm shooting for a "big desktop" setup, with my laptop display and the two external monitors forming one large multi-monitor X screen.
When deciding which video driver I'd need, I did the usual:
$ lspci | grep VGA
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Venus XT [Radeon HD 8800M Series]
Which is weird, because the M4800 isn't shipped with 8800M cards. Rather, it's shipped with the AMD FirePro M5100 Mobility Pro (see above link) (also, too many "Pros", AMD...).
I tried the open-source driver, but I couldn't get both my external monitors working in tandem, so I went with catalyst-test, since the non-beta version of the proprietary driver doesn't support the 3.13 kernel (or my alleged 8800M series card, for what it's worth).
My display setup using catalyst-test is still far from ideal. My dual (horizontally adjacent) monitors reset to cloned/mirrored desktops after every reboot, and my machine refuses to show three monitors (dual monitors + laptop display), even with the 2GB of dedicated RAM in my graphics card (see above M4800 link). There's other miscellaneous annoyances as well.
Using hardinfo, I see that my VGA driver thinks it only has 256MB of RAM... which doesn't align with the M4800 specs. Is there a way to change this value?
Just today, I found the catalyst-firepro driver, which I think might be the correct driver for my laptop, at least given the specs on the M4800 from the website.
There's also the option of not using my AMD card at all, and just using the Intel graphics on my laptop. (I had to disable hybrid graphics in my BIOS to get any AMD-specific drivers to work). I'd like to steer away from this, due to the performance loss, but I'd be willing to make the change if the pros outweighed the cons.
As I see it, I have a few options:
AMD/ATI open source driver: Can't seem to get two monitors working, much less three...
catalyst-test: Any two monitors will work together, but not three. Other annoyances.
catalyst-firepro: Have not tested yet.
Intel open-source driver with AMD card disabled: Have not tested yet.
Can anyone who has had similar issues and/or hardware offer a best course of action which has worked for them? I know we're supposed to avoid "opinion" questions, but I think this is grounded enough in the scientific method to merit some helpful responses.
Any help is appreciated.
Thanks!

clfarron4 wrote:
The last option to me is screaming catalyst-pxp at me, because that's one of the few options if you have integrated graphics and a discrete graphics card.
Let me get this straight: Can you disable the either or both of the Intel/AMD graphics in the BIOS settings? If so, but don't want to disable either, you might want to look at the hybrid graphics section of the wiki.
I know about powerXpress and I think I'd like to avoid it. My experience with hybrid graphics on other Linux distributions is that it's rather unstable or just plain unsupported. If someone can convince me otherwise, given their experience with hybrid graphics on Arch/Linux, I might reconsider.
I'm fairly certain I can enable either of my GPU's separately, but I'll have to check for sure next I reboot my PC.
The last option I mentioned because I thought the Intel drivers might be more robust than the AMD drivers, which have don't have a sterling reputation when it comes to supporting Linux (compared to nVidia anyways, who I know in the past have had good Linux support).

Dual Monitors on t430

I just received my new t430 and having issue with dual monitors. I am using the Intel HD 4000. I have it connected to a ThinkPad Port Replicator Series 3 (Type 4336). The docking station only support VGA connection. My new t430 only has a VGA connection on the side.
I have 2 monitors. One is connected to the VGA on the docking station. The other is connected to the VGA on the t430 itself.
While the machine is docked, Monitor #1 that is plugged into the docking station works, while Monitor #2 that is plugged into the t430 does not.
While undocked. Monitor #1 does work (obviously because undocked), but then Monitor #2 does work.
So I know both monitors are working and configured for VGA input. My questions is, why can't both work at the same time? While undocked, I can use laptop screen and Monitor #2 as a dual monitor. So I don't believe there is something wrong with the Operating System (Windows 7).
I used to be able to do this on my t420. With one monitor using VGA, and my other monitor using a DisplayPort. But looks like this model my company purchased doesn't support a DisplayPort (at least don't have the connection.)
Any help is greatly appreciated.
Thanks.
-Bill
Solved!
Go to Solution.

I purchased the following adapter and now I am back to using dual monitors:
http://www.amazon.com/StarTech-MDP2DVI-DisplayPort-Adapter-Converter/dp/B00310K9VQ
Thanks again for the direction.

Cairo-Dock - Dual Monitors

Similar Messages

Maybe you are looking for