Calander and time help important documents showing up here
hi, when i click to see the calander, time so on and it comes up somehow a important document shows up as well, how can i delete this from the clock, calander area?
thanks
I'm having the exact same problem. Not sure when it started, but I was looking to restore a file yesterday and noticed that there seems to be a long history of backups - but there are no dates next to the bars along the right side - and no ability to go back in time. I restored a file a few weeks ago (after upgrading to 10.6), and can't recall if any subsequent update has caused them to disappear. I'm hoping someone can shed some light on this problem soon.
Similar Messages
-
After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...
I have a TB internal drive, but this is what it shows for memory slots:
Memory Slots:
ECC: Enabled
DIMM Riser B/DIMM 1:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x0000
Part Number: 0x000000463732353642363145353830304600
Serial Number: 0x00000000
DIMM Riser B/DIMM 2:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x0000
Part Number: 0x000000463732353642363145353830304600
Serial Number: 0x00000000
DIMM Riser A/DIMM 1:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x42076007
DIMM Riser A/DIMM 2:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x4207631E
DIMM Riser B/DIMM 3:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser B/DIMM 4:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser A/DIMM 3:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser A/DIMM 4:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty -
How can i change date and time after importing a file
hello
i'm importing AVI files first in iMovie because Final doesn't support (other question i put in) but when i see the scenes form 1993 they have the date 2004.
i believe 2004 is the date i put them on the computer.
Now i looked in the help files Final Cut Pro but cant find anything to adjust the date and time.
it works well in iMovie using the help files:
Right-click the clip you wish to edit and click Adjust Clip Date and Time from the menu that appears. Or click on Archive and than adjust date and time
But as i said i cant import the files in FCP have to import them to iMovie files adjust the date and than import to Final Cut Pro but than de changes i made to the date and time are gone and in FCP 2004 is again the date of the file!!!
Question how can i Change in Final Cut Pro the date and time in a same way as iMovie does?
JemajoroOK, I think I understand what you are saying but it still does not look like it is doing it as you describe.
Here is another screen shot.
Note that all clips in "2007 August" event have the date of Aug x, 2007.
Yet, the event "2007 August" still shows up under the 2012 "folder" (is that the right terminology?).
The newest clip in this event is Aug 31, 2007 so shouldn't it be categorized as 2007 and not 2012?
I think you know this but I am using the following feature:
Go to the sprocket icon under the events.
Select "Group events by date" and then by "group events by year and month"
Thanks again for all the help -
Javascript to print print date and time on scanned documents
I'm using the following code to print a message, time/date stamp, and expiry date along the right hand side of printed documents. It works fine on word docs that were printed to pdf, but when a document it scanned, it mysteriously prints the the correct line of text, but also prints an additional, identical line perpendicular to the original line.
Any help would be most appreciated!
// Add field to each page of form
var inch = 72;
for (var p = 0; p < this.numPages ; p++) {
// create rectangle quads for field
var aRect = this.getPageBox( {nPage: p} );
aRect[0] = 540.0;
aRect[1] = 0.0;
aRect[2] = 576.0;
aRect[3] = 792;
var f = this.addField("PrintField" + p, "text", p, aRect)
f.delay = false;
f.print = true;
f.hidden = true;
f.delay = false;
f.rotation = 90;
f.textSize = 10;
f.textFont = font.HelvB;
f.textColor = color.red;
f.alignment = "center";
f.readonly = true;
f.value = "";
var myWillPrintScript =
'for (var p = 0; p < this.numPages ; p++) { ' +
'var f = this.getField("PrintField" + p); '
+ 'f.hidden = false; '
+ 'var d = new Date(); '
+ 'var expiryd = new Date(); '
+ 'var ThursdayArray = new Array(7); '
+ 'ThursdayArray[0] = 4; '
+ 'ThursdayArray[1] = 3; '
+ 'ThursdayArray[2] = 2; '
+ 'ThursdayArray[3] = 1; '
+ 'ThursdayArray[4] = 0; '
+ 'ThursdayArray[5] = 6; '
+ 'ThursdayArray[6] = 5; '
+ 'var currentday = 0;'
+ 'currentday = d.getDay(); '
+ 'expiryd.setDate(expiryd.getDate() + ThursdayArray[currentday]);'
+ 'f.value = "This is an unofficial copy of a controlled document. Print date/time: " + util.printd("dd mmm yyyy HH:MM ", d) + " Expires: "+ util.printd("dd mmm yyyy ", expiryd) + " 23:59 EST.";'
+ '}'
var myDidPrintScript =
'this.resetForm();'
+ 'this.dirty = false;'
// Now set the scripts to execute on the Will/Did Print events.
this.setAction("WillPrint", myWillPrintScript);
this.setAction("DidPrint", myDidPrintScript);Very unusual, Here are some more questions to help nail down the issue.
Are both date text lines in form fields? What are the form field names? i.e. is this an exact copy of the existing form field? What are the settings that differentiate the two fields, i.e. Rotation, etc.?
Could the script be somehow getting run twice?
On another note, why are you naming all of the fields differently. It looks like they all get the same info. If this is true then you could simplify the script by making them all the same name. You would not need the loop to apply the date text.
Thom Parker
The source for PDF Scripting Info
www.pdfScripting.com
The Acrobat JavaScript Reference, Use it Early and Often
http://www.adobe.com/devnet/acrobat/ -
In aperture 3 and Iphoto '09, import from show iphoto browser doesn't work
when I choose Import/Show Iphoto Browser, I get the browser blank, with the sentence "no items to show". What to do?
so I deleted the iPhoto library (under projects & albums) from within Aperture and this removed all the photos that I just imported. I'm bit confused because if I imported them into Aperture then why would they still be linked to an iPhoto library.
When you imported them they are put in a Folder called iPhoto Library. You can drag them out of that. But because you deleted the Folder, they were deleted too.
Regards
TD -
Hi,
I have a varchar column (Start_Time )which currently contains time .
Example :
08:00:00
09:30:00
15:30:00
16:30:00
I created new column (Start_Time_New) which is Date Datatype .
This column should be updated with values from Start_Time column
a)Sysdate
b)AM PM should be added .
Above Example :
Start_Time Start_Time_New
8:00:00 7/5/2012 8:00:00 AM
9:30:00 7/5/2012 9:30:00 AM
15:30:00 7/5/2012 3:30:00 PM
16:30:00 7/5/2012 4:30:00 PM
Please Help .
Thanks in Advance.Hi,
Here's one way:
UPDATE table_x
SET start_time_new = TO_DATE ( TO_CHAR (SYSDATE, 'YYYY-MM-DD') || start_time
, 'YYYY-MM-DDHH24:MI:SS'
;A slightly more efficient way, but much more confusing, is
UPDATE table_x
SET start_time_new = TO_DATE (start_time, 'HH24:MI:SS') + ( TRUNC (SYSDATE)
- TRUNC (SYSDATE, 'MONTH')
;If you'd care to post CREATE TABLE and INSERT statements for your sample data, then I could test it.
Either way, this assumes that start_time is a VARCHAR2 column, and that every non-NULL value is really a valid time.
Edited by: Frank Kulash on Jul 5, 2012 12:02 PM
Changed ":=" to "=".
Preethi MR wrote:
... I created new column (Start_Time_New) which is Date Datatype .
This column should be updated with values from Start_Time column
a)Sysdate
b)AM PM should be added .Values stored in a DATE column are all stored in the same format, which does not correspond to anything you want to see.
Use 'AM' (or 'PM', it doesn;t matter which) in the 2nd argument of TO_CHAR when you display the DATE, if that's what you want. -
I set up my new air and now want to transfer my info from my macbook pro and I seem to have missed the boat and want to go back and do it . the computers are in different names with diff. passwords. Any idea?
If you set yp the Air before transfer, look in Users or Accounts pref pane to see if the other user is there to login to.
-
How to know date and time information from Trace File defaultTrace.X.trc?
Hi, all.
i'm using EP 6.0 SP9 patch 1.
As you know, default trace is written in the <SID>\JC00\j2ee\cluster\server0\log\defaultTrace.X.trc.
By using the default trace formatter, it shows like the following sample messages.
#1.5#0011110E7B2000590000000100000A100003EC71562E6EBC#1104396451585#com.sap.jms.server.ServerClientAdapter##com.sap.jms.server.ServerClientAdapter#Guest#18####716257115a3f11d9b73b0011110e7b20#SAPEngine_Application_Thread[impl:3]_23##0#0#Error#1#/Applications/JMS#Plain###JMS internal error at ServerClientAdapter! JMS Service is not started!#
My questions are
1. how do we retrieve the date and time information from the above message? It seems that this message has date and time info because LogViewer shows the date and time based on the above message.
2. how do we change the above date format to easier one
like "YYYY:MM:DD:hh:mm:ss"? i know that it can be configured from the Visual Admin --> Services --> Log Configurator but i don't know the exact place for the trace file.
Thanks.Hi Sejoon,
I use the standalone Logviewer to read the log files. Works great.
"If you have an SAP Web Application Server Java 6.20 or below you may also get a standalone_logviewer.zip file at the SAP Service Marketplace at service.sap.com/download → SAP NetWeaver → Release 04. In this case JDK version 1.3 or higher must be installed on the system. The java version must be same on the server and the client.
In the SAP Web AS Java 6.30 installation a folder named logviewer_standalone can be found under: <path Of J2EE installation>/<SysID>/JC<nr>/j2ee/admin/logviewer_standalone. Verify that the batch file logviewer.bat is installed in the directory logviewer-standalone.
(source -> http://help.sap.com/saphelp_nw04/helpdata/en/e4/540c404a435509e10000000a1550b0/frameset.htm)
Best wishes,
Noel -
Current Date and Time in JLabel
Hi i am fairly new to Java and i would like to know how i can get a label to show the current date and time ( with seconds) to show up in the top right hand corner.
Thank you.Hi i am fairly new to Java and i would like to know
how i can get a label to show the current date and
time ( with seconds) to show up in the top right hand
corner.
Thank you.You can use TimerTask to do it. also go through the api for Calendar, Date and DateFormat. -
Lost clips after adjusting date and time??
I just updated to iMovie 10.0.3 and adjusted a buch of events in iMovie. All of them were incorrectly placed in wrong years when viewing in "by date" format. After adjusting the date and time with the event highlighted, I come to see either all or some (a clip of two) of the event is lost. The good old "missing file" is what I get in the playback window.
I want to go on an anti-iMovie rant as this version has caused me NOTHING but headaches sence I installed it last year but it's MY fault for not having a spare iMovie 9.0 laying around so I cannot revert.
Is there any solution here besides wiping my iMovie library clean and restoring from TM?
Thanks.
EDIT, I just looked in each event in the file system and the original media is not even there anymore but the library size hasnt changed. Wow. I don't get this at all.There seems to be a serious bug here that has been introduced with iMovie 10.0.3, and reported by several posters. I would recommend you report it using Apple feedback at: http://www.apple.com/feedback/
There is probably a particular infrequent set of conditions that have to exist for a clip to be deleted after using the adjust time and date function, but I've seen no posts yet that have clarified this. Any further details you have would be worth reporting - for example did you change the date/time to earlier or later? If only some date/time changed clips have disappeared, do they have anything in common, not shared by the clips which havn't disappeared?
You could restore your library from Time machine or, if there are not many lost clips it may be simpler and quicker s to re-import (or drag and drop) the clips from a backup and correct affected projects. (Maybe you can change their date and time before importing them).
As for the library size were the clips big enough to make a visible difference to the library total?
Have you searched for the missing clips by name?
Geoff. -
Date and time of appointment to light. How can I make them darker?
I find the date and time of the appointments show in a light grey color which I find hard to see. How can I make the date show in a darker color?
Finally gotten the hang of editing < </div>
Cool. I've been at this for more than 30 years, I still learn stuff every single day.
and now we are trying to improve the speed with which out video clips play on the web. I would love them to load as quickly as the large movie trailers on the apple site. I have experimented with the export settings and gotten them a bit better but not they are still not loading as quickly as the Apple ones. Any ideas? < </div>
Get yourself two or more of the very intensely geeky books on streaming media. In this case, though, it's got nothing to do with your export or compression/encoding settings. It's all about how rapidly your server can send the file into the Internet when it called.
bogiesan -
Hi experts,
How can i view the created Time & date of a sales order and its invoice.And also the changed time and date.
Many Thanks In advance.
AbhishekHi,
Goto the T.Code "SE11/SE16".
Enter the table name as "VBAK".
Enter your sales order number into the field "VBELN" and then Execute.
Get the Created date from the field "ERDAT" and time from the field "ERZET".
Next for getting the creation date and time for Billing document,goto the table "VBRK".
Pass the billing document number.Execute.
Get the Created date from the field "ERDAT" and time from the field "ERZET".
For getting the changed details,there are different ways.
One such easiest way is goto the T.Code "VA03",Enter your order number.
Click on Environment-->Changes.
Select "Overview" and "Additional Info".
Execute.
Select your entry and click on choose.
Here you will get the date and time.
The similar thing is for billing document changes also use teh T.Code "VF03".
Or one more way is pass the Order number preceeded by two 0's into the field "Object Id" in the table "CDPOS" and then execute.
Get teh Changenr.
Pass the same to "CDHDR" table to get the UDATE and UTIME.
Regards,
Krishna. -
Help!..Pages now is a disaster, crashes and I can't open any important documents!
Hello, I am writing from Italy...HELP!!!!
I have this problem: I can't open three important documents because Pages crashes. I can't use Icloud (if these documents are not opened in Pages, Icloud does not download documents!!!).
I worked on these documents for months and now it is a disaster.
Please apple, new update is necessary.
How I can solve this problem?
I can't return to the previous version of Pages because it is impossible but this is the one solution that I have read in Internet.I haven't had this exact issue, so I can't tell you exactly how I fixed it, but I can give a couple of guesses that might help.
Definitely, if you haven't, restart the ipad by pressing and holding the power button on the top of the ipad until it turns off by itself, then wait a minute, then restart it. This has solved a ton of different random iPad issues for me. I'm not sure why, but when I first learned this trick, it was hold down the button on the front at the same time as the power button. For some reason, with iOS 6, this seems to do some kind of quick restart that doesn't turn off the device in the same way.
The only other thing, I can think of is to use a second iDevice to try to download the files. If you also have a second apple iPod touch, iphone or ipad, try to download the most recent version that has synced to that device. Then I'd export it via email so that I at least have a copy to work from, in case the issue with Pages doesn't get resolved.
Good luck! -
Date and Time Stamp not showing up on import?
I recorded with date and time stamp on my Sony Sr-11 and when I import it in iMovie 11 it's not displayed. Please help so when I import it shows up in iMovie 11.
Playing back the tape in the camcorder that originally recorded the tape with the display output activated, doesn't mean that you actually recorded the date & time as part of the video. Check the user's manual of your camcorder to find out how to record date & time as part of the image - not just to a data track. FCP doesn't access the data code info.
-DH -
I need help! My iPad2's stubbornly showing the wrong month, day, year and time.
This happened after I updated my new iPad2 to the iOS 5.0.1. The calendar shows a date way ahead into the future. Ex. Today is Dec. 31, 2011, 6am, Manila time but its showing Jan. 1, 2555 BE, 8am. It just got my location right. I tried resetting it at Settings but it keeps on going back to the wrong date, 2555 BE. I turned off the automatic update, and manually set the time, but It seems to insist the error. I sync this iPad with iTunes to a Windows 7 PC, it has the correct date, year and time zone. I've been following a similar thread here but I could not find it now. Please give advice that I could do on my own first before I seek Apple care coz its almost party time here. Thanks and Happy New Year!
I got several advice from other Apple users such as: restart the iPad by pressing the home button and the sleep/wake simultaneously, turn off the auto-update of date and time, make sure it's in Gregorian, sync with a computer with the right date and time and restore. I did all of the above except restore but it didn't help. I thought I should restore to the previous iOS. When I tried to restore, I learned that it'll still be in iOS 5.0.1, and since I also couldn't back up to iCloud (which freaked me out), I chickened out of it and called the nearest Apple Store. They were very kind to help me for free.
Before I went to the store, I backed up my iPad to PC first to keep my paid apps at least. Then the Apple guy checked the problem himself and he restored it in their iTunes. After the restore, the month, day, time and year were correct. When I got home, I just synced with the previous back-up. All my apps were re-installed, my games were intact but my documents saved in some apps (like Documents to Go, PDF Expert and CHM+) were gone.
The Apple guy said, I might have encountered an Internet problem while I was updating hence the bug. I was the first case they've encountered. But they couldn't explain what the BE stands for... Before Extinction? Hope the experts shed light on this to avoid it coz I wasn't able to use my iPad or even back-up to iCloud.
Maybe you are looking for
-
Copying Between iTunes on 2 computers with same Apple ID
I use 2 computers with the same apple id for iTunes. My main iTunes acct is on a computer with no cd drive. When I import cds onto the secondary computer, how can I get those albums to iTunes on my main computer? Family Sharing doesn't seem to help s
-
Wanted particular line item to be billed directly after delivery
I came across a situation where my client wants particular line item to be billed after delivery. Say, there are other line items too which are delivered. How to configure this in system?
-
Hi all, while creating report in 'Oracle BI publisher 11g', I am getting the below error, Can any body knows this? If so pls give me the solution to overcome this error. Failed to load: js/xdo/app/designer/ribbon/tabs/groups/template/PaperGroup.tmpl
-
I'm using the XQuery Java API (OJXQI) and I managed to combine the content of local XML file and relational table from database in the following way: FOR $a IN document ("bib.xml")/bib/book FOR $b IN sqlquery("select * from scott.emp")/ROW WHERE $b/S
-
I realize this is supposed to be a "feature" but I find it really annoying. Say I view forum topics, click one way down at the bottom. Navigate back, page loads (always takes FF forever these days), so after things begin to populate I scroll down to