CALC 12C - Where did it go?!?  What now?

I had downloaded a wonderful app "CALC 12C" which was a terrific emulation of the HP 12C calculator, and free. It was from Crimson Research. I still have it on my iPhone, no problem. Yet.
What happened? Anyone know?
Perhaps more to the point, when Apple pulls an application, what happens -- will it disappear on my next sync, or next app store update? Will I be able to go to firmware 2.3 and have it remain? When I got a new phone once, it was suggested I re-downlaod them all from scratch. I did, no problem and no new charges -- obviously couldn't now, so I'd be restoring with iTunes, does it check that it is still an approved app?

I will.
I've been doing a lot of reading in the various websites where work on HP calculator simulation is done, and there appear to be licensing or copyright issues with some later microcode, e.g. I see where the nonpareil distribution was being discussed as split between free and not over this. So it may well be that some kind of copyright issue arose. There's a fair amount of history for other efforts, none for this free one, so I did not learn much.
As to comments about others -- there are, some quite expensive. Plus I love to encourage the GNU and similar efforts when they appear, I'd rather donate to a freeware GNU effort than pay the same for a commercial product.

Similar Messages

  • HT1414 my ipad shut off while using my battery is charged and i did itunes restore did not work what now

    itunes restore did not work what do i do now

    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    The copy above was copied from this website.
    http://support.apple.com/kb/TS3694#error14

  • Where did my iphone pictures go?

    I connected my phone to my macpro.I then allowed it to do the upgrade.An error ocurred but it still had new feeatures and everything I used worked.I went away and took numerous new pictures. When i went to load them on my laptop it wanted to finish doing the upgrade.Another error message came up and when i went to view the pictures they were gone, but not all where gone just the new latest ones. Where did they go, what is wrong with the upgrades and how do I retrieve my lost pictures?

    You should not be syncing/updating your phone on more than one computer. Most likely, the update downloaded and installed using your Mac Pro, but the backup did not restore. You set it up as a new device.  Then you plugged it back into your laptio, which you apparently either normally sync to, or at least synced to last, which said 'oh goody! a new phone! Do you want to restore it from your last backup?'
    To which you answered, 'yes'.
    Which them promptly wiped out your phone and restored it from the backup.
    It did exactly what you told it to.
    Your pictures are gone unless you had Photo Stream turned on.

  • Please help!! I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000  photos not showing up. What happened?! Where did all my photos go?!

    I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000  photos not showing up. What happened?! Where did all my photos go?!

    WOOHOO!!! i finaly fixed the problem. Here is what to do:
    Chances are if you did the same thing as me you either have
    A) No album names at all for ALL your songs in your library
    or
    B) Have the same name for every album for ALL your songs in your library.
    Here is how to fix it (yah it will take a little work but its worth getting your iPod functioning properly).
    Unless you dont want to have to go and actualy set al lthe album names for every song here is what you can do:
    Go through to iTunes and arange your songs by Artist name. Click the top song for your first artist, hold Shift and click the last song for that same artist (to multi select all the songs for the artist) go into get info and check the Album box. Copy the name of the artist to the Album box and hit ok.
    Now when u update your ipod and go into ur Artists section the actual Artist name should show up instead of the song names.
    For some reason having the same album name for all your songs messes up the organization of the iPod.
    Hope this helps anyone else that is having the same problem

  • I uploaded a lot of important pictures to iPhoto, after downloading them I deleted them off my memory card. Now, iPhoto will not let me look at the pictures and the album in which I put them is empty. Where did they go? What should I do? Help please!

    I uploaded a lot of important pictures to iPhoto, and then deleted them off my memory card. I tried looking at the pictures and they are no wheere to be found, the album in which they were is empty, and I looked everywhere for them. Where did they go? What should I do?

    Check to make sure the iPhoto Advanced preferences are set to copy photos into the library when importing, i.e. a "managed" library:
    If it is and you don't see any thumbnail in the Event they should be in apply the two fixes below in order as needed: 
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with
    Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    If you are unable to get iPhoto to recover the photos MediaRECOVER can be used on the memory card to recover the photos as long a they haven't been overwritten.  It will run in demo mode so you can see if it will recover the photo before you have to purchase it.
    OT

  • When I open iPhoto its asks me what photo library I want to use.  I already have a photo library that i've been using for 2 years, where did it go? and why am I being asked now to choose a library or "create new" what happened to all my photos?

    When I open iPhoto it asks me to choose a photo library.  I already have a libary with photos and events in it that I've been using for 2 years.  Where did it go?  What happened to all my photos

    We have no way of knowing what goes on on your machine. All we can tell is that your iPhoto library is missing and iPhoto can't find it. If you can't find then I the only thing you can do is restore from your Back Up.
    Regards
    TD

  • HT4972 I was downloading $15 worth of iTunes songs from a gift card when my iPod died. Now, no credit & no songs on my iPod. Where did either my $$ go or my songs that I paid for disappear? How do I get one or the other?

    I was downloading $15 worth of iTunes songs from a gift card when my iPod died. Now, no credit & no songs on my iPod. Where did either my $$ go or my songs that I paid for disappear? How do I get one or the other? I have 2 of the same iPod's and logged onto both with the same as well as different apple ID's and passwords to each respective iPod and the completion of my downloaded songs has disappeared into thin air. Where did it go? How do I get the credit too re-download those songs to the correct iPod? Please help me!! [email protected]

    What happens when you try to redownload them?
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    On a computer go to iTunes>Store>View Account>Sign in and go to purchased history and see if you actually purchased them.
    Try redeeming the card again
    Contact iTunes
    Apple - Support - iTunes - Contact Us

  • Chose 'Export to Shared Services' on a calc script....where did it go?

    I accidentally right-click and choose 'Export to Shared Services' on a Calc script in EAS.
    the help file is not much...I am curious...where did this export to in Shared Services? What is the point of this feature?
    Thanks
    JTS

    Hi,
    I think it was Hyperion's original idea to share objects between applications which were known as models, so you could export outlines and calc scripts to shared services and then shared them across applications or to synchronize different applications.
    It is something that I have never seen really used and I am sure it was dropped after 9.2, though the option still existed to export in EAS but you couldn't manage models in 9.3
    I think it has all be superseeded with concepts like EPMA and LCM.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • I have CS6 it use to have the Acrobat XPro now it is gone. Where did it go and how do I get it back?

    I have CS6 it use to have the Acrobat XPro now it is gone. Where did it go and how do I get it back?

    We can't know. You are not offering any system info or details on what product/ suite you are actualyl referring to by "CS6" nor do we know what update or install procedures on your system you may have done recently. There was an Acro update last week, perhaps it bombed and destroyed your Acro install...
    Mylenium

  • Installing the update to InDesign CC 2014 it only gets to where it says "Finishing," hung up at this point for a week or more. What now?

    Installing the update to InDesign CC 2014 it only gets to where it says "Finishing," hung up at this point for a week or more. What now? In the CC Activity Stream it is not listed as a program I have updated, so I am sure it did not finish. If it is stable as is I do not have to upgrade at this point -- just started an important project and stability is my biggest concern. But I do want to know how to complete installing  this upgrade.
    Thanks,
    Jackie

    Nobody can tell you anything without proper system info or other technical details.
    Mylenium

  • I just updated to to the most recent version of Pages and now cannot view or open any of my previous documents created before the update.  Where did they disappear to? Can I retrieve them?

    I just updated to the most recent version of Pages.  now I can't view or access  any of the documents created in the previous version.  Where did they go? How can I retrieve them?

    Hi cmccloud,
    What is the error message you get? If it's telling you to upgrade Numbers but you already have updated, then that means you probably are trying to open the document with the old version, which is still on your Mac, in a sub folder within Applications named iWork '09. Open the document with the Numbers that is in your Applications folder (not the one in a subfolder). It's easy to confuse the two, because the icons are similar.
    If you're getting some other error message, could you post specifics?
    SG

  • TS1702 I did an updating and now I cannot see the photos of my contacts in whatsapp, what I can I do to solve this issue?

    I did an updating and now I cannot see the photos of my contacts in whatsapp, what I can I do to solve this issue?

    Click the Bookmarks icon in the Safari toolbar.
    On the right hover your cursor just above the line where you see Bookmark and Address. When you see the small white hand drag up or down as needed to reveal your Bookmarks.
    edit by cs

  • I installed Snow Leopard when it first came out but now my mac says it has os x 10.5.x.  Where did snow leopard go?

    I installed Snow Leopard when it first came out but now my mac says it has os x 10.5.x.  Where did snow leopard go?

    Hi, after a little more looking, I think your response might lead me to a solution.  It looks like the Snow Leopard install package is on my MacBook Pro hard drive but apparently something isn't right because I'm still running 10.5.  I found something called 10.6 Install Package or something like that and clicked on it.  It asked me where I wanted to install it and I said on the MacBook Pro hard drive in a new folder called Snow Leopard.  It told me the installation was successful.  I then restarted the computer but it is still using 10.5.  Any suggestions on what to do now?

  • I joined itunes match. I had over 1,000 songs.  Now I have 298.  Where did they go?

    I joined itunes match.  I had over 1,000 songs.  I now have 298.  Where did they go?

    You can only sync with one computer. When you synced to the new computer it would have erased it and synced what was on the new computer.
    You always need to have a backup, an iPhone is not a storage device.
    When you get a new computer you need to transfer your library before syncing
    If you don't have a backup you may be out of luck
    The only thing would be if you're in the US and have access to the iCloud beta to reload purchases
    http://support.apple.com/kb/ht2519

  • Where did the "Stop" button go on the Navigation Bar in ff4? It isn't included in the Customize box. Is there anyway to install the "Stop" button for loading web pages or is this option compeletly gone from Firefox now?

    Just installed upgrade to Firefox 4.0. Where did the "Stop" button go on the Navigation Bar. I checked the Customize dialogue box and it isn't included. Is anyone else missing it? Is there anyway to install the "Stop" button for loading web pages or is this option completely gone from Firefox now? It was a very helpful button and allowed us users to stop a web page and move on if it wasn't what we needed.

    In Firefox 4 by default the Stop, Go and Reload buttons are combined and attached to the right hand edge of the location bar.
    When you are typing in the location bar it will show the Go button. When a site is loading it shows the Stop button. At other times it shows the Reload button.
    If you want separate buttons, right-click on a toolbar and choose Customize, you can then drag and drop the stop or reload buttons and place them elsewhere. If you place them in the order "Reload-Stop" on the right hand edge of the location bar they will be combined again. For more details on customizing the toolbar see https://support.mozilla.com/kb/How+to+customize+the+toolbar

Maybe you are looking for

  • Incoterms in Intercompany Billing Document

    My Dear SAP Mentors, Can you please let me know that from where in "Purchase Order" incoterm appears at item level... In the concerned PO at Header level there is a seperate incoterm for e.g. DDP Jyderup...I know this comes from the vendor master rec

  • Required standard report

    Hi, Please help me in getting the report. Require a report which should have  PO No., Material Code,  PO qunatity, GR quantity  and payment to supplier with respect to GR. Thanks...

  • My MacPro will not wake up from sleep after the 10.8.2 upgrade.

    Since latest os upgrade to 10.8.2, my mac will not wake up from sleep.

  • Error while executing pgm RMMR1MRS in background

    Hi Experts, when executing pgm RMMR1MRS ( T-code MRRL) in background , when i check job log am getting errors and warnings ,  but when executed manually it is working fine , can you guide me what might be the problem. Thank's in advance, Aby.

  • Service Manager 2012 R2 - Workflow Error - Event ID 4513

    Hi, We started to suffer a Workflow error in Service Manager 2012 R2 2 weeks ago. We noticed through the failure of some SLOs not being applied on Work Items. The error is the follow: Log Name:      Operations Manager Source:        HealthService Dat