Calc Status doesn't change on Prior Months...

After I load metadata I "consolidate all with data" for December of a given year. Once this consolidation is finished the Calc Status of Dec is "OK" but when I look at any Prior Month within the same year the Calc Status is "OK SC" It is my understanding that consolidating any given month would consolidate all prior periods within the same Scenario/Year. Is there a way to fix this so the prior periods are consolidated as well?

It would consolidate prior months if there was some change in the data for those months. Here, you have changed metadata therefore the status is "OK SC" which means that it is calculated/consolidated but there is a System Change (SC) since the last calculation/consolidation. HFM has no way to know whether you wanted to keep the calculations according to the previous version of your rules, so it does not execute consolidation for those periods. Bare in mind that rules may change from period to period due to changes in regulation (or more generally in the client's business needs) in contrast to the reason that the system is not yet finalized, which is probably your case at hand. In this case you must manually execute the consolidation for those periods.

Similar Messages

CUPC 8.0.3 busy status doesn't change to offline on OS (windows) shutdown

Hi,
We found the following problem with CUPC8.0.3.
When you set the status to 'busy' or 'do not disturb' and you shut down or restart windows (without closing the CUPC program manually) the status doesn't change to offline (from the perspective of other CUPC users or the CUPS end user information page)
If the status is availabe it is going to offline when windows is shut down or restarted
Does anyone know if this is a defect...?
Thanks
rgs
Luk

Hi Luc,
Yes I managed to reproduce it in my lab as well. As soon as you login (after a shutdown) the user is shown busy again.
This is working as expected and it is a known behaviour. It is tracked by the following defect
CSCsl11256
The thing is that a fix would require a lot of changes in CUPC architecture and there is no known date where this issue will be tackled.
This does not happen when the user is already in available status because the busy and 'do not disturb' require special handling
I hope this clarifies things a bit.
Regards,
Christos

User status doesn't changes in WebAdmin console even after deprovisioning..

When a user’s organization is changed from one to another, he is automatically deprovisioned at once from the target resource (if already provisioned).
But when you check the status of that user in the WebAdmin console it shows as Provisioned to that resource. Even manually disabling and revoking the access doesn’t works. Nor the user can be provisioned to that target resource again as in when you go to resource profile of that user, there is no resource (that specific target resource to which he was provisioned earlier) present.

Can anybody give a solution to the above problem???
Thanks in Advance ..
Abhishek

Thread status doesn't change

If I read thread and leave it then status (red ball next to thread name) should be white, but it isn't. Somebody knows why. It helps reading thread.
Peter D.
I noticed that in SQL\PLSQL forum. In this forum if I leave thread red ball changes to while to last visited thread.
Message was edited by:
Peter D.

See Content indicator

Content checked in status doesn't change

Hi,
When ever I check in a file(doc,hcsp etc) to the UCM, its status always default to "Done" instead of "Released". Need to know whats the issue
Thanks,
Abhijit

Hi
Seems indexer is playing spoilsport here .See if the indexer is throwing error for these contents . You can get that by enabling indexer tracing option from System Audit Information page.
Thanks
Srinath

I received a mail from Apple but my status doesn't change

I ordered my ipod touch on sept 17, my status is processing items but with delivery date 26-30 oct.... But yesterday Apple send me a mail and it says this:
Estimate (a) Client Apple, Thank you for your recent purchase at the Apple Store. We are pleased to inform you that your recent order of iPod Touch be shipped ahead of schedule. The new shipping date is to 3 business days. Please visit:http://store.apple.com/mx/orderstatus to review the latest information on the status of your order.
I saw my status and still in the same: processing and with delivery date... I waiting for the mail "Preparing for shipping" and nothing or only Apple will send a mail for "Shipped"? please tell me because I'm so anxious and desperate! (I'm from Mexico)

OOOhhh really? mmm so I guess that the both mails could arrive next week (monday or tuesday) because mail said 3 days ... today was one jujuju or not?
SanTakesOff wrote:
from what ive seen, preparing to ship and shipped happen in the same 24 hours. usually it will say preparing to ship, then later on in the day, it will say shipped

My Battery status doesn't change on my MacBook Pro and then dies

Hi, I have a MacBook Pro that is maybe a year and a half old and is running Snow Leopard. Just recently (only yesterday) I realized that the batter status widget in the menu bar is lying to me. It always reads 3:35 (95%). And then it dies without a warning of low battery. It is extremely annoying and if not for the auto-recover function of Word, I would've had to rewrite an essay yesterday. Once I plug in the charger, the computer recharges. I think everything is working, it's just that the computer isn't notifying me about the battery status.
Thanks in advance!
~Chet

Apple Portables: Low power warning does not appear while running off of the battery
Using Mac OSX v10.6
Consider updating to 10.6.8

Apple Mail message read status doesn't change when read

In Apple Mail, when getting mail from an Exchange 2010 server on the corp LAN works great. However, on about 2 out of 10 messages, after I read the message it still has the "dot" showing it as unread and I have to manually select mark > as read. I even let it sit for a while thinking it has to sync but no luck. I still have to manually mark it. Very frustrating. Any ideas?

To clarify something else, the unread mail badge disappears off of the app in the tray as well as the inbox in the lefthand column. But the blue dot remains on the conversation thread.

Lync 2013 doesn't change status to be "In Meeting" when we have meeting based on Calendar in Outloook

Hi Sir,
My company use MS. Lync 2013. All PCs are set as default to "Update my presence
based on my calendar information". So most of them whenever they have meeting based on calendar in Outlook, the Lync status will be changed to be "In Meeting" BUT I found just 2-3 computers not change to be "In Meeting". It still keeps
showing as "Available". Could you please advise the solution ?
PS. I already tried to uninstall and re-install but the problem still same.

Hi,
Please check the value of CalendarStatePublicationInterval, it will control the time of Lync waiting before retrieving calendar information from Microsoft Outlook and adding this data to your presence information.
For example, to set the CalendarStatePublicationInterval to 10 minutes (600 seconds) use this syntax:
CalendarStatePublicationInterval 600
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Why the time of the online redo logs doesn't change?

Oracle 11.1.0.7 on windows 2008.I find the time of the online redo logs doesn't change since Jan 18 when I had restarted database,and the time of some datafiles doesn't change either.the database is always online and changes are wrriting to the files, I don't know how this happened?
would anyone help me? thank you.

ROCK wrote:
I found some datafiles have the latest date,but the other not. They all have write/read operations on them.
and the switching of the redo logs doesn't change the timestamps of the logfiles since Jan.18 when I had restarted the database. this situation does not appear on the early 8.1.7 database on windows 2000
Does this situation normal?Hi,
Why dont you post the output of the query you are using such as
select group#, first_time, status from v$log;
select name, last_time, status from v$datafile;
select name, CHECKPOINT_TIME, status from v$datafile_header;Time stamp wont change for offline and may be for temp tablespace.
Regards
Anurag

Locked Work Status doesn't work

Hi
This is a new case.
I have original work status like this. I show MAN only in this example
Unlock    MAN=unlock
Submitted MAN=owner
Approved MAN=locked
Then I add a new work status line as the intial state
Start     MAN=locked
Unlock    MAN=unlock
Submitted MAN=owner
Approved MAN=locked
The purpose of the Start work status is to prevent the user submit something at the initial state.
But the Start work status doesn't lock anything, user is freely to submit data on this work state.
My analysis,
I changed the current work status from Start to Unlock and switch it back to Start and the lock does its job.
Anybody has the same issue?
Halomoan
Edited by: Halomoan Zhou on Aug 26, 2008 11:50 AM

It is logical that it works only after you upgrade to unlocked and downgrade again. The workstatus mechanism makes use of a table called tblFINANCElock (or what name your application has). In the beginning there are no records in this table which indicates that the data is unlocked. Once you update the status for the first time a record is generated with a status. From now on the system can link the records to the work status setting that you have defined and see that status "start" should lock the data. I think this functioality works as it is intended, and the only workaround for you is to lock and unlock the data before the users start entering data for that period.
-Joost

Sum prior month KF1 + KF2

Hello,
I am stuck in what seemed like a simple calculation...
I have two key figures in my rows, and need to display fiscal year/month in the columns (requirements are for monthly totals across a rolling 24 months).
As part of a bigger calculation, I need to add the following KFs and display the result in each of the 24 monthly column.
prior month KF1 + KF2
For example:
Feb = Jan KF1 + Feb KF2
March = Feb KF1 + March KF2
April = March KF1 + April KF2
...etc.
I have tried using RKFs and offset variables, but this just changes the months that are displayed in the columns. Basically, I need for the value of KF1 for month X to "exist" in the following month's column.
Help!

Hi,
I can see that you have a solution, but is it really working without a structure?
I mean do you have your 2 KFs in the rows and then your CALMONTH in the drilldown accross the columns and then see
KF1 = value for the month
and KF2 = value for the previous month?
please let me know because that would be new to me
Olivier.

Prior month rate or data

Hi,
How can we access the prior month rate in the business rule table? If I use, say OPEAVG, it returns the AVG rate from the last month of the previous year. If I set the OPENING_PERIOD to -1 in the selected scenario, it doesn't seem to work.
Thanks,
Regis

Note that I created a member "PAVG" in the RATE dimension and had a logic to copy the prior month AVG into the current month PAVG. This logic works fine but when I use PAVG in the Business Rule table, it converts at rate 0. However if I use a different name, say LMAVG as member name instead of "PAVG", then it functions.
Somehow, "P" seems to be assimilated to the opening rate that corresponds to the average rate of the last month of the previous year.

Release Status Code not changing

Hi experts,
     There is a button "Released" on CustomerInvoiceRequestQAF. After released, the new invoice that I have created should be released.
     But I check the released status code in CustomerInvoice.xbo's BeforeSaveEvent and the status is still not changing. It still shows "Not Released".
The steps when I press Release on CustomerInvoiceRequestQAF.
1.CustomerInvoice.xbo's BeforeSave (because I have written some code there)
     this.Status.ReleasedStatusCode is still "1" meaning "Not Released". It should be "3" (Released)
2.CustomerInvoiceRequest.xbo's BeforeSave
     this.Status.LifeCycleCode is still "1" meaning "Not Released".It should be "2" (Released).
When I press Release on CustomerInvoiceQAF. The status is changed to Released.
Thanks in advance.
Regards,
Fred.

Hi, Horst,
     Thanks,
     This case involves 2 standard BOs. CustomerInvoiceRequest and CustomerInvoice.
     CustomerInoivceRequestQAF--->Save     -->Invoice Requests (CustomerInvoiceRequestOWL)
      I can release the invoice directly here.
     CustomerInvoiceRequestQAF-->Release -->Invoice Documents (CustomerInoivceOWL)
     OR
    I can release the invoice this way. First "Save as Invoice", and Then "Release" it in Invoice      Documents.
      CustomerInoivceRequestQAF--->Save As Invoice -->CustomerInvoiceQAF(with a status "Not      Released")
     CustomerInvoiceQAF--> Release -->Invoice Documents(with a status "Released")
     The second case works fine. In the first case, the release status code doesn't change to "Released".
Regards,
Fred.

Scope statement for Change From Prior Year

Hello All,
I have to create Current Year, Prior year and change from Prior year for all the measures. I was able to creat current Year and Prior Year calcuation with scope statemnet. But I could not do the same for Change from Prior year. I am getting 0 for
all the months.
Here is what i have:
SCOPE([LABEL].[LABEL].&[ChangeFromPY])
THIS=
AGGREGATE(
[DATE DT].[Date_Hierarchy].CURRENTMEMBER,
[LABEL].[LABEL].&[Current Year]
AGGREGATE(
PARALLELPERIOD
[DATE DT].[Date_Hierarchy].[Year], 1, [DATE DT].[Date_Hierarchy].CURRENTMEMBER),
[LABEL].[LABEL].&[Prior Year]

Hi Om25,
According to your description, the Prior year calculation works on Excel, however, it not works when creating dashborad in performance Point, right? In this case, you can create separate measures for Prior Year in Cube, and use it in performance Point directly.
Here is a link that might helpful for you, please see:
http://www.bidn.com/blogs/cprice1979/ssas/2473/fun-with-mdx-ndash-part-3-ytd-and-prior-ytd-calculations
Regards,
Charlie Liao
TechNet Community Support

Calc Status doesn't change on Prior Months...

Similar Messages

Maybe you are looking for