"Calculate Average" option for the Activity Usage Profile doesn't work

I have the same problem as poster 793128 in a comment for a different thread: the "calculate average" profile option doesn't work for units (it works for cost though). I've used this option a lot on previous versions of Primavera but for some reason is not working on our new P6 release 7 (stand alone). As 793128’s post says: nothing happens, nothing changes, the profile keep showing totals, doesn't matter if the "base hours on time period" box is selected or if the divider is input by the user.
The same option (calculate average / divide by) on the resource usage spreadsheet and on the tabular reports do work as expected so doesn't seem to be that I checked the wrong box for some user or administrator preference set up.
Thank you for any help or clue. I posted this as a different thread because my original post was in a resource profile thread for a different issue that was already answered.

*793365,*
After reading your post I tested an older layout of mine that uses a similar setup and it still operates fine. On the "Resource Usage Profile Options" box under the "Graph" tab, I have "Calculate Average" checked and "24" entered in the "Divide interval totals by:" box.
This allows my resource profile to display manhours per day for me.
Some of my background info:
I run in a multi-users platform and not in a stand alone setup.
We have different resources loaded into the schedule with multiple calendars.
I have several "Resource Filter/Group Names" setup for each separate resource on the "Data" tab too.
Hope this helps,

Similar Messages

Changing the linked image for the Image Matte Key doesn't work

When I change the linked image for the Image Matte Key in Photoshop, the link does not change in my Premiere Pro CS6. Sometimes it takes 2-3 times going into the Image Matte Key setting and locating the new matte in Explorer (each time having to re-locate the folder that the matte is in) to see it within the premier monitor. Any suggestions?

Hi
The commands work correctly here on the same OS etc: Cycle Locators jump to the next/prev marker and the Playhead jumps to the Start of the Marker.
Default KC are Control Command +Arrow Left/right
Step 1: check you are using the correct key command :-)
CCT

MEASUREMENTS IN ACTIVITY USAGE PROFILE

Please see enclosed link 'printscreen', how is it possible to see, in the Activity Usage Profile, the measurements (hours or manpower,etc.) in the chart blocks,
specific per month?
And P6 does not show the actual hours + curve (actual progress till January 2011)
Thanks in advance for your response, regards,
WP
Edited by: WP Hertel on 18-jan-2011 12:09
Edited by: WP Hertel on 31-jan-2011 15:27

Modify your timescale to Month.
1. Right-click on the graph and select the Activity Usage Profile Options.
2. Click on the Graph Tab
3. Select the checkbox 'Calculate Average'
4. Select the 'hours' per month by typing them in (this won't work in P6 7.0 with no service pack). 173 hours is the default and this will convert the Axis to 'bodies'.
If you want to see exact numbers, double-click in the graph and a popup window will appear.
Regards,
Steve Clements

What is the definition of "All Projects" in P6 EPPM for the Team Usage Charts?

In P6 Professional 8.3, there is a User Preference setting which can be used to define "All Projects" for the Resource Usage Profile. The choices are: All Open, All Closed except What-if, All Closed with Leveling Priority over x. In P6 EPPM 8.3, there are My Preferences settings. In these settings, I see several choices which are also in the P6 Professional User Preferences, but I do not see a way to set the definition of "All Projects". Does this mean that EPPM uses the SAME settings as selected in P6 Professional or does it mean that "All Projects" is not configurable in P6 EPPM? If it is not configurable in P6 EPPM, what is the definition of "All Projects" in P6 EPPM?

http://www.apple.com/batteries/iphone.html look here Apple-batteries-iphone.

Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

Dear S&OP community,
I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
This what I did...
1) Created new attributes and master data objects and activated them successfully.
2) Time profile created and activated successfully
3) Trying to create planing area by assigning time profile in step 2 and assigned master data from step1..Unable to save the data and system returns
this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
My understanding is time profile needs to be active but doesn't have to have values...
Any help is appreciated.
Thanks,
Krishna

YS,
Here are my time profile settings
Level       Name          Display Horizon - Past Display Horizon - Future
1             Monthly     -6                                       11
2             Quarterly     -2                                       3
3             Yearly        -1                                       2
Time profile is active and but time profile data is not loaded
Thanks,
Krishna

How to calculate Average balance for an account

Hi,
How to calculate average balance for an account for a particular period say for JAN-12 period and after the end of that period for another two days 01-feb-12 and 01-feb-12 ?
I'm using the following query :
SELECT cc.segment1||'-'||cc.segment2||'-'||cc.segment3||'-'||cc.segment4||'-'||cc.segment5||'-'||cc.segment6 "Account_XX",
nvl(sum(l.accounted_dr - l.accounted_cr),0) "Balance"
FROM gl_code_combinations cc,
gl_je_lines l
WHERE cc.code_combination_id = l.code_combination_id
AND l.set_of_books_id ='XX'
and code_combination_id = replace it with code combination_id for account_xx
AND l.effective_date <= '31-Jan-12' (january period end ??)
GROUP BY cc.segment1||'-'||cc.segment2||'-'||cc.segment3||'-'||cc.segment4||'-'||cc.segment5||'-'||cc.segment6
There are some discrepancies in "average balance" after end of month (Jan-12)?
How to calculate average balances for a particular account (Account_XX above)from end of month of Jan to first two days of february?
Thanks,
Kiran

Kiran,
Please let me know first, is Average Balancing feature enabled in your GL Ledger?
Regards
Muhammad Ayaz

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

What is the average speed for the fans? Mine seem really slow.

What is the average speed for the fans in a MacBook Pro? When my computer is fairly idle, like right now, the fans are at roughly 1000 rpm each. Is that normal? I have seen posts where the fans are 2500-5000 rpm, so mine seem a bit low. That may explain why my computer has been getting hotter more quickly lately - this started happening after Apple replaced my logic board a few days ago.

I installed smcFanControl2 and according to that program, Apple's defaults are 2,000RPMs and the program will not let you set it any lower than that because of the increased risk of damage.
My fans are always at 2,000RPMs during normal usage, and then once I fire up a DVD or Photoshop it usually goes up to the 3,000s or so.

I have powerpoint for Mac on my imac. I can't seem to get the active text box function to work like it did on my PC. How can I insert an active textbox into a presentation that will allow me to type while presenting?

I have powerpoint for Mac on my imac. I can't seem to get the active text box function to work like it did on my PC. How can I insert an active textbox into a presentation that will allow me to type while presenting?

I've gotten a little further on this. The dynamic select is
working fine. It's the "a href" code that isn't. I'm wondering if
someone can look at this line and tell me if it's okay to build the
query string this way. The storeid comes through fine but I'm still
not getting the employeeid value to pass. Here's line that's not
working:
td><a href="registerStoreCust.php?storeid=<?php echo
$row_storeRS['storeid']; echo "&employeeid="; echo
$_GET['employeeLM']; ?>">Register
Customer</a></td>

Memory could not be allocated for the activation process. Please close all applications and try agai

I have just had a Windows XP failure and took the opportunity to replace with Windows 7. After I reinstalled PhotoShop CS(1) the message "Memory could not be allocated for the activation process. Please close all applications and try again" is shown and forces PhotoShop to close. I have 4Gb of Ram installed and a total of about 10Gb of Page File space on three partitions of a 500Gb HDD. The system is not heavily loaded! However, I cannot access Photoshop to check scratch disk allocation. How to fix???
Back to top

Yes, there are many forums, and it can be confusing. Your question has the best chance of being answered if it is in the proper place. I think it is there now.
Pattie
http://forums.adobe.com/message/5092533#5092533 is your post address
Download and installation forum:
http://forums.adobe.com/community/download_install_setup

Memory could not be allocated for the activation process. Please close all applications and tr again

Hello,
Just purchased a new laptop:
Intel Core 2 quad
4gb memory
1000 HDD
Photoshop CS 8.0 disc dead/scratched/unreadable. So I copied my Adobe folder from my Program Files Folder on my PC and pasted on laptop. When I try and run PS I get the error message "Memory could not be allocated for the activation process. Please close all applications and try again". Which I do then Photoshop closes.
Can anyone help (in layman terms please)?

Not really. You are essentially FUBARd. Without a proper install, there is usually no way on to get the licensing stuff working. You might be able to get there by installing any other CS product, so PS could latch on to the licensing system that would be already in place, but otherwise it's a lost cause. Simply copying over the executables is normally not enough. I will admit though, that I skipped CS, so there may be some tool somewhere that I don't know about can do this post facto...
Mylenium

Memory Could Not Be Allocated For the Activation of PhotoShop

CS2 Intel P4 3.0GhzHT, 3-4GB Ram WinXP
Photoshop won't open for me. It used to. Any idea how I might fix this?
When I try to open Photoshop, I get "Memory could not be allocated for the activation process. Please close all applications and try again."
I've done this with no applications after a fresh reboot and get the same message.
It only started recently. Photoshop used to open for me and was usable.
I got 3 or 4 GB of ram. I can't remember, but WinXP only sees about 3GB anyway. Either way should be more than enough, no?

Lee71 wrote:
hey john, thanks for resuscitating the topic. I on XP and it’s PS8
I have defragged, cleaned disc, etc.
In terms of symptoms, PS opens up and once open the prompt comes up. I hit okay and it shuts down.
i have tried CTRL + ALT + SHIFT whilst PS boots up; i get the prompt "ÿou currently have Adobe Photoshops primary Scratch and Windows' primary paging file on the same volume, which can result in reduced performance. It is reommmended that you set PS Primary Scratch Volume to be on a differrent volume, preferably on a different physical dirve."
I guess this means reinstall, partition and set up on a partitioned drive? I don't particularly want to take this course of action if there is an alternative. It doesn't make sense given I've got plenty of space.
No no need for that!
The message about the scratch drive is normal: the CTRL + ALT + SHIFT resets the preferences to the default for a single HDD. If you have more than one, go into Edit > Preferences > Performance and set the primary scratch drive to the one without the paging file.
Once you have OK'd that message it should go away if you do only have one HDD.
Partitioning will not do anything. The object of the separate drives (if you have them) is to avoid conflict between Scratch and Page file.
Do you still have your original problem?

The Nordins - Options for the next time you need a customer!

The headline is from an email we received: "Verizon - Options for the next time you need customer service!" Well, we changed it, just slightly. Well, on 6/20/2013 we had the TV down; it was said to be a piece of video equipment that went down. We could not get anything on the TV until next day. The sad part is that we were watching the Heat-Spurs game and it quit just 1min-36sec. prior to the end of the game. Then, we could not watch our daily Netflix show we watch every evening before going to bed. So in calling twice, we found out about the video equipment problem. But typically Verizon, they replaced the equipment and thought nothing about the customer that actually lost the reception!! How about crediting us for the time "off the air". You can't have the cake and eat it too. Then, Verizon sends us emails about the bill, customer service, etc. but there is no way for us to email them back!! Why do they think my time is less valuable then theirs; having to call their customer service and to wait a long time for answer by someone in "God knows where country". What does that tell you about the customer service commitment! It's like, yeah you are one of the slob users that keep paying the bills for lousy service. Perhaps it's time for all of us to switch off our TV's for one or two days a week and not pay them for "our time off the grid". Having some couple of thousand TV's off twice a week may shake them up a bit. So here is my idea. Establish an email address where we can reach anyone in customer service directly, in our own state, not somewhere 1000 and more miles away. Additionally, if something is down, does not matter what time of the day, stand up for it and give the customer their credit due. Thanks for reading

It all depends how you use it.
Once the initial break in period is over, like the first year, it should run just fine as long as you don't abuse it, don't let it overheat, keep the dust out etc.
Do get the AppleCare as it's very expensive to repair a Mac.
Some tips:
1: Avoid using the built in keyboard and trackpad as much as possible. I know what's the use, but it's these too area's, the USB ports and the Superdrive that experience the most wear and tear.
2: If you do use the built in keyboard, take off your watch and jewelry, it scratches. mars, reacts with the case and discolors it.
3: The keybord is a bit weak compared to regular PC desktop keyboards, so use a wireless one, but have a wired one around for emergencies. The keyboard collects dirt, grime, hair, dust etc, underneath, you might want to have a light cover over the keys but still let air get underneath.
4: Be gentle with the audio ports and the Superdrive, don't use your computer for watching DVD's. The Superdrive is important for recovering the machine with the installer disk which also must be well taken care of.
5: A GOOD case, like a MacTruck or a padded one will absorb the shocks if dropped while transporting.
6: The biggest concern is other people, they just don't handle things with care because it's not theirs and they are ignorant or even spiteful of the money you spent to have a quality machine.
7: Clone your boot drive to a external regularly, in fact have two, one staggered back in time a few weeks, it's hold option bootable in case your hard drive dies. Free cloning software like Carbon Copy Cloner or the commercial version Superduper does the job well.

I have CS4 web Premium - I am trying to look at the Adobe Cloud option for the 2015 compable product. However...under my registered produst only Acrobate is listed...I also have the subject Adobe product. When I type in the serial # from the oriinal ad

I have CS4 Web Premium - I am trying to look at the Adobe Cloud options for the 2015 compatible products. However...under my registered products...only Acrobat is listed...I also have the CS$ Web Premium Adobe product. When I type in the serial # from the original Adobe CS 4 dvd's package I get a "product already registered"...but I can not find it's registration on any Adobe page and it doesn't show up under registered products on the Adobe Cloud page(s)
Since it's registered...how/where do I find this verification...
Thanks TRinAz
Message was edited by: Tim Rogers - spelling

You will have to contact support by web chat to figure out any such issues.
Mylenium

There is no 4g LTE option for the Helix

I bought a Helix in May directly through a Lenovo gov/military sales rep to evaluate it for education and I am moderately happy with it. I want to add a cellular mobile capability and the Lenovo tech I spoke to said there is only an Ericson 3G option for the Helix. Anyone out there with a 4g LTE model? I thought there going to be a Gobi 4g LTE chip available.

My recollection is that there was a LTE model briefly available but this was withdrawn due to some compatibility problems (I don't know the exact details). There were rumours that these would be resolved with a new LTE model released around August 2013 but as far as I know this never happened.
Matthew

"Calculate Average" option for the Activity Usage Profile doesn't work

Similar Messages

Maybe you are looking for