Calculate key figures are not important to reports

Hello Experts,
How can I delete a calculated key figure from the query when the change of report query is not accessible from the analyzer?
Thank you

If you can create a new workbook you can. Simpy right-click on "Key figures" in the BEx Analyzer, remove the specific C-KF from the displayed list of keyfigures and the save the Workbook. You should check if you have the authorization rights to save this new Workbook into existing roles, or just your Favourites.
Altering the Query is a bit more work though.

Similar Messages

Some key figure are not update for movement type 101

Dear All,
I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
I have loaded the data according to stranded procedure in "How to Load...."
I have checked the values of material in R3 and it is there.
Example of the record::
Material    Plant Movement type Calender Day    quanity Base Unit
10101      01       350                     01.02.2006     20             KG
10101        01       101                     05.07.2006                      KG
10101         01      101                      10.07.2006                      KG
The Quantity is not appearing in second and third record.

Hi,
Please check whether you have set ''Rule groups'' at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
Please check whether you have set this option at transfermation level.
For example, may be in your case materials from different plants are updating to different key figure.
Thanks,
Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM

Some key figures are not being correctly reversed in the Change Log

Hi Experts,
I'm working with the BI 7 (SP 15) and I have created an ODS with Overwrite option (Record Mode equal to ' ') and a Cube receiving data from this ODS.
Whenever I have a change in one existing record in R/3 side (already previously loaded to BW), it comes perfectly to the ODS and overwrite the record in the Active Data. However, in the change log table, the before image record is not reversing all the key figures, there is one (Quant type) which is not working and it is being doubled in the cube. All the other key figures are Amount type and are working fine. PLease see below some examples of the Change Log behavior:
First time the record comes - Change log content:
Material   Valid Dt   Cost Value      Quantity Rec. Mode      Req. ID
1234     May/01   $ 100.00       10          'N'     1
Second time when the record changes the Date:
Material     Date      Cost Value      Quantity Rec. Mode      Req. 1234     May/29   $ 100.00       10          ' '     2
1234     May/01   $ -100.00       10          'X'     2
Then the final result in the cube, after it is compressed, is:
Material     Date      Cost Value      Quantity
1234     May/29   $ 100.00       20
Also, I have a Counter in the transformation to the Cube which is a constant equal to 1, it is also being aggregated erroneously. I could create a routine to check the record mode coming, but I'm not sure it is the best solution.
Can anybody help me to figure this out, please?
Thanks in advance.

Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks.

In Query key figure are not populated

Hi Gurus,
i am using a RSCRMBAPI to get the out put of my query into a Ztable but when i run my program the Ztable is getting data but no key figures are getting populated.
plz help
thanks
neelu

Hi gurus,
i just have 1.6lac records with six keyfigures so i think its not the problem of limitation...
then can somebody help me how to get rid of this, no key figure values are getting populated
thanks and regards
Neel

Key figures are not appearing in the reports ?

Hi Guys,
After integration process BW with Crystal 2008. I have tried to build a report on Bex query on top the Infocube. I could not fine key figures. Can you guys help me out ?

Hi,
can you run the BEx query in transaction RSRT without any issues and keyfigures are shown ?
Ingo

Why key figures are not displaying

Dear Experts,
I am faced with a problem not encountered before. My report has multiple key figures all of which are not displayed when I run the query. However if I change the view to Tabular format (from query properties) the key figures become visible.
Request your help in resolving the issue.

Hi,
are you hidden the some key figures? please check.
select the KF -> go to properties -> check the display tab - hide/show/hide can be shown.
if not close and open one more time in query designer.
Thanks,
Phani.

Hidden Key figures are not being displayed after unhiding

We've applied SP 14 - SP 22 in our 3.1C BW system. Prior to the patches going in, users were able to unhide hidden key figures through the Change Query local view and view them in the report once the query was executed. After the patches were applied, even though the key figures
were unhiden through the change query local view, they are not returned in the report after executing the
query.
As anyone run across this after appling this patch level ?

Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks.

Virtual Key Figures- RSRT says Key Figures are not valid

Hi,
Getting the following mssg when I try to generate a query in RSRT for the first time after I have coded Virtual Key Figures.
For the characteristic that I am pulling the user entered data from:
/BIC/ZNEWEST is not a valid characteristic for InfoProvider 0QM_C08
Message no. BRAIN122
Diagnosis
"Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers /BIC/ZNEWEST as the characteristic to be calculated. 1. is however not a valid key figure for Infoprovider 0QM_C08.
System response
/BIC/ZNEWEST is ignored.
Procedure
Check the exit."
From the key figure I am using this info to populate value:
"/BIC/ZKF3 is not a valid key figures for InfoProvider 0QM_C08
Message no. BRAIN121
Diagnosis
Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers /BIC/ZKF3 as the key figure to be calculated. 1. is however not a valid key figure for Infoprovider 0QM_C08 or /BIC/ZKF3 references the key figure . In this case, the basic key figure l is enough to calculate in the exit.
System response
/BIC/ZKF3 is ignored.
Procedure
Check the exit."
Any help would be appreciated.
This is my first time using Virtual KF's.
Thanks,
Brandon

Hi Ajay,
Here is my code:
 FORM user_0QM_C08 *
--> L_S_RKB1D *
--> C_S_DATA *
FORM user_0QM_C08 USING l_s_rkb1d TYPE rsr_s_rkb1d
 CHANGING c_s_data TYPE any.
*-- Local data
DATA: l_n TYPE n,
 FIN1 like /bic/azqm_O5000-/BIC/ZPFINNT,
 FIN2 like /bic/azqm_O5000-/BIC/ZPFINNT,
 STAR1 like /bic/azqm_O5000-/BIC/ZPFINNT,
 STAR2 like /bic/azqm_O5000-/BIC/ZPFINNT,
 TASK type STRING.
*-- Field Symbols
FIELD-SYMBOLS <ZNEWEST>.
FIELD-SYMBOLS <ZOLDEST>.
FIELD-SYMBOLS <ZPSTARNT>.
FIELD-SYMBOLS <ZPFINNT>.
FIELD-SYMBOLS <ZKF3>.
FIELD-SYMBOLS <ZKF4>.
FIELD-SYMBOLS <0NOTIFICATN>.
*->>> Initial checks
SELECT SINGLE * FROM zvir_reports
 WHERE infocube = l_s_rkb1d-infocube
 AND compid = l_s_rkb1d-compid.
CHECK sy-subrc IS INITIAL.
*->>> Prepare the structure
ASSIGN COMPONENT g_pos_0QM_C08_ZNEWEST
 OF STRUCTURE c_s_data TO <ZNEWEST>.
ASSIGN COMPONENT g_pos_0QM_C08_ZOLDEST
 OF STRUCTURE c_s_data TO <ZOLDEST>.
ASSIGN COMPONENT g_pos_0QM_C08_ZPSTARNT
 OF STRUCTURE c_s_data TO <ZPSTARNT>.
ASSIGN COMPONENT g_pos_0QM_C08_ZPFINNT
 OF STRUCTURE c_s_data TO <ZPFINNT>.
ASSIGN COMPONENT g_pos_0QM_C08_0NOTIFICATN
 OF STRUCTURE c_s_data TO <0NOTIFICATN>.
*~~~>Changeable
ASSIGN COMPONENT g_pos_0QM_C08_zKF3
 OF STRUCTURE c_s_data TO <ZKF3>.
ASSIGN COMPONENT g_pos_0QM_C08_zKF4
 OF STRUCTURE c_s_data TO <ZKF4>.
*do not go thru code if user fields are blank.
IF <znewest> IS INITIAL OR <zoldest> IS INITIAL.
Exit.
Endif.
*-->>> Read general data
CLEAR: /BIC/AZQM_O5000, FIN1, FIN2, STAR1, STAR2, TASK.
TASK = 'SCM'.
get Start1 time
SELECT /BIC/ZPSTARNT FROM /bic/azqm_O5000 INTO STAR1
 WHERE notificatn EQ <0NOTIFICATN>
 AND /bic/ZNEWEST EQ <ZNEWEST>.
ENDSELECT.
Get Finish1 time
SELECT /BIC/ZPFINNT FROM /bic/azqm_O5000 INTO FIN1
 WHERE notificatn EQ <0NOTIFICATN>
 AND /bic/ZNEWEST EQ TASK.
ENDSELECT.
Get Finish2 time & Start2 time
SELECT /BIC/ZPFINNT /BIC/ZPSTARNT FROM /bic/azqm_O5000 INTO (FIN2 ,
STAR2)
 WHERE notificatn EQ <0NOTIFICATN>
 AND /bic/ZOLDEST EQ <ZOLDEST>.
ENDSELECT.
*- Update key figures
<zKF3> = abs( FIN1 - STAR2 ).
<zKF4> = abs( STAR1 - FIN2 ).
ENDFORM. "user_0QM_C08
Thx

Key figures are not available when i performing LBWE action

Hi gurus,
I am trying to load 2lis_02_hdr, 2lis_02_itm and 2lis_02_scl to infocube 0pur_c04.
But whatever the key figures available in the cube its not appear in the R/3 side data Source.. but those keyfigures are available in LIS structure.. for that how can i bring those key figures to dataSource for using LO Cockpit..
I heard we need to perform some prerequistes in SBIW.. let me know in breif with step by step..
Full points will assign to all those reply my query early..
Please let me know if not understand my query..
Thanks in Advance

Hello Sudheer
2LIS_02_HDR, ITM and SCL do not take data from S011 but directly from transactionnal tables like EBEP, EBKO, EBPO (names quoted from memory).
So you have to look for the key figures from those tables and not the one in S011.
Historically, the three datasource were built to replace 2LIS_02_S011 but the calculations to rebuild the keyfigures were delivered in BW in an old BCT that made the conversions. The logic and modeling have changed completely.
If you really need to transfer S011 to BW without remodelling the data, you may want to use a generic extractor based on S011 (provided you have a delta key available).
Otherwise, in SBIW, Options for datasource specific to the application, Logistics, purchasing, you have two customizing transactions. you have to define branch and process key to load data into BW. But that will not have any effect to LBWE.
Hope this helps.
Regards
Fabrice

Web templete showing "EA" in the Key figure but not in Bex Report

Hi,
When I exucute my query in BEx , the report works fine , but while exucuting in Web , "EA" is getting added after every Key figure Value..
Can you pls help us with any input ?

Ajay,
I think you did't understood the problem correctly .
My Bex report don't have any Quantity Key figure So in bex report no Unit( If I think EA is Unit ) is coming . Same should come while executing in Web . But the Problem is in Web some EA symbol is coming .
N.B : Our system just undergone SP upgrade .

Key figures in Cost elemnt based report

Dear All,
I have created a Cost Element based Report for the Project using report painter. In this same report, I want to pull a key figure(the key figure is 'remaining forecast planned costs") which is coming from cost forecasting report (Report 12CTC1 from transaction CJE0).
The issue is this 'key figure' is not available for report made in report group 6P3(report group for cost element based report). Is there anyway I can pull this particular key figure in my report.
Thanks in advance !
Regards,
Mahendra Dighe

Also if you're using HR data, the employee data is time dependent, so that for each employee number there are any number of records. This may be causing the aggregate reporting condition that you mentioned. In BW it's important to recognize that the master data also can play a role in how many records are returned. The infoprovider is not the only source of additional records. For example:
Employee has three records in the time range.
Salary infoprovider has only one.
Results will contain THREE records, one for each employee record, all with the same salary record. On an aggregate basis, the salary results will be multiplied by three.
Time dependent master data can be a source of much confusion. For some HR reporting, I have created a 'most current' employee master data record that is not time dependent, and is loaded daily. I then use that for data models such as salary or other separate infoproviders.

Key figures in cost element based report

Dear All,
I have created a Cost Element based Report for the Project using report painter. In this same report, I want to pull a key figure(the key figure is 'remaining forecast planned costs") which is coming from cost forecasting report (Report 12CTC1 from transaction CJE0).
The issue is this 'key figure' is not available for report made in report group 6P3(report group for cost element based report). Is there anyway I can pull this particular key figure in my report.
Thanks in advance !
Regards,
Mahendra Dighe

Also if you're using HR data, the employee data is time dependent, so that for each employee number there are any number of records. This may be causing the aggregate reporting condition that you mentioned. In BW it's important to recognize that the master data also can play a role in how many records are returned. The infoprovider is not the only source of additional records. For example:
Employee has three records in the time range.
Salary infoprovider has only one.
Results will contain THREE records, one for each employee record, all with the same salary record. On an aggregate basis, the salary results will be multiplied by three.
Time dependent master data can be a source of much confusion. For some HR reporting, I have created a 'most current' employee master data record that is not time dependent, and is loaded daily. I then use that for data models such as salary or other separate infoproviders.

Reg:F.19 report figures are not tallying with gl account 208030. Why?

hi boss
F.19 report figures are not tallying with gl account 208030. Why?
pls urgent
amk

Hi,
We have had GO-LIVE on 2008 April. They have executed balances carry forwrad for 2008 only. Do they need to carry forward balances for 2007 also?
Is this the reason, that the system is showing differances in F.08 report.
Kindly help me
Thanks
Kishore
Edited by: Emergys Corp on Nov 24, 2009 8:56 AM

How to calculate key figure before aggregation for complex formular?

Hi, buddies
Here's the simplified senario:
I have a cube, in which the characteristics are 'Calendar Day' and 'Hour' (values are 01~24), and the key figures are stored by day and by hour.
What I need is very simple, a query to display calculated key figures only by Calendar Day. I don't need Hour information.
So I create a query: column charact is Calendar Day, rows are several calculated key figures.
Now the problem is that:
if I don't put 'Hour' as row in the query, I'll get WRONG result. But if I put 'Hour' as row in the query, I'll get CORRECT result, but all the 'Hour' details will display, which should be hided.
I know the reason is that:
the calculated key figure that I create should be calucated before aggregation, not after. But since the formular is pretty complex, I can't change the 'Time of Aggregation Calculation' in key figure's property. (It's greyed out.) So I have to put 'Hour' as row in the query to force calcuation 'before aggregation' in query and set the property 'Calculate Result As...' as 'Summary'.
My question is:
whether there's any other way to force calcuation 'before aggregation', so I don't have to put 'Hour' in the query.
If no, is there a simple way to hide the 'Hour' details and only display summary result ON THE QUERY LEVEL? (
I can hide detail lines by using web template, or maybe using VB in excel. But I can't use either of them. I want to hide the details on the QUERY LEVEL. So I can use the query directly in any other reporting tools, like Visual Composer.)
Any idea?
Wei

Hi, Sudeepta
Thanks for your reply.
I did try to set 'No display' for 'Hour'. The result is that the Characteristics 'Hour' doesn't appear on the query result, but the detailed line of key figures still display on the result. It looks like the followings: (I put summaries on the top/right)
Date 1/1 1/2 Overall result
KPI1 10 11 22 (sum line)
KPI2 20 21 41 (sum line)
KPI1 12 13 25 (detailed line)
KPI2 13 13 26 (detailed line)
KPI1 11 12 23 (detailed line)
KPI2 12 12 24 (detailed line)
I want to suppress all the detailed lines and leave sum lines on the result.

Maintenance Cost Key Figures in MCI3 and MCI8 Reports

we are using ECC6 EHP4 version. Maintenance Cost Key Figures in MCI3 and MCI8 Reports are not reflected the cost as given in different value categories in work orders. I have configrured the PMIS "Assign Value Categories to Maintenance Cost Key Figures" and Valuation Cateogies are also rightly configured. is it some bug or am I missing some thing. Please help

Thanks for your help.
I checked transaction code OMOS. all infor structure are on monthly update which is fair. however, I rebuilt the info structure through folllowing navigation path and it worked.
believe ur info structure S070-MCI7 is not getting update correctly , suggest u to run a statistical update via
Logistics - General + Logistics Information System (LIS) + Logistics Data Warehouse + Data Basis + Tools + Setup of Statistical Data + Application-specific Setup of Statistical Data + Perform Setup - Plant Maintenance ..

Calculate key figures are not important to reports

Similar Messages

Maybe you are looking for