Calculate Net Book Value For Asset
Hi Guru,
how I Can Coding Program for calculate Asset Net Book Value ( Function Module or Formula)
Regards,
Supperkorn
use :
(1) logical database ADA and structure anlcv
or
(2) fm FI_AA_VALUES_CALCULATE
field anlcv-lfd_bchwrt for current NBV
hope that helps
Andreas
Similar Messages
-
Which table contains net book value for Assets created with AS91.
Which table contains net book value for Assets created with AS91.
I have a problem locating where the net book value is stored in SAP. Is it simply calculated and not stored in any one place? I am trying to predict how SAP will calculate the net book value for some assets we plan on converting, but my formula doesn't always work consistently and I have not idea what is going on. If it is stored in a table some place, can anyone please let me know!
Thank you allHi anar.samadzade & Michael Stewart
It is not possible to directly get net book value of an any Table. You must migrate the gross book value (acquisition cost) and the accumulated depreciation. SAP will then calculate the NBV.
Gross Block & Accumulate Dep you will get from Table: ANLC
http://fixedassetsaccounting.net/migrating-fixed-assets-into-sap-a-harlex-guide/
Dear anar.samadzade Ask Questions politely
Regards
Viswa -
Which table or combinations of table that stored net book value for asset?
I need help in finding the above. I need to customize an asset report and need the net book value amount.
hi Mohamed,
basically you have to calculate like this:
+ ANLC-KANSW
+ ANLC-KAUFW
+ ANLC-KINVZ
- ANLC-KNAFA
- ANLC-KSAFA
- ANLC-KAAFA
hope this helps
ec -
Incorrect net book value of asset
Hi Experts,
I have a scenario as below :
SAP has recorded an incorrect net book value of asset # xxxxx due to an intial write-off via depreciation expense of a credit balance. Only 1 period of depreciation should be booked.
How it is possible ?
Can any body through some light on this.
Awaiting your reply.
Thanks & Regards
AdityaHi,
You would have been posted your question with the actual scenario with values, rather than asking general queries.
Hope you understood what i am trying to say.
Thanks,
Srinu -
Transfer of Net Book Value of Assets to Reserves.
Hello,
Due to changes in the Companies Act the useful of several of our assets has expired, but book value of the assets still remain.
I have a requirement where I want to transfer the net book value of such assets to a Reserves G/L account, without effecting the P&L.
Normal asset retirement transactions affect the P&L, i.e. loss or gain.
Is it possible to do this somehow?
Regards,
PradeepHi,
use a transfer variant which uses the net method. That should fulfill the requirement.
Regards,
Markus -
How to calculate monthly booked value in asset?
Dear Experts,
i have a query in asset accounting. we are developing a report in asset for calculating month till date and year till date value of asset under project or w/o project.
Can anybody tell me the logic and fields and table for find out the monthly value of an asset means how much cost/expense booked for an asset under project or for asset w/o project?
Regards
ArunHi,
You can refer ANLA table and field POSNR for WBS element.
Regards,
B. Radhika -
Negative net book value of asset
Hi Colleague,
I have following situation on two my assets, but the reason is the same.
In previous closed fiscal year 2013 in depreciation area 30 there has been posted depreciation in value of 353,17.
Due to the wrong transaction type by creating of asset there has been performed correction.
Is it possible to correct that this this value of depreciation from previous fiscal year will be reversed ?
I attach screens who can allow to imagine this issue.
Thanks a lot for any art of suggestions of correction !hi,
if I need to use transaction abaa, which transaction type i need to use.
When I performed this transaction i can see following information, that unplanned depreciation is negative in depreciation area.
Please see attached screen
Thanks -
Which table stores the net book vaues of assets ?
Hi,
I want to see which table stores the Net book value of assets.
in the assets books and financial information windows the figures are there. but I cannot find the table.
Thanks and Regards,
MPHHi
Hope this below query may help u
you can get all the amounts by passing asset id , from_date and to_date
SELECT far.cost_retired,
far.nbv_retired,
far.proceeds_of_sale,
far.gain_loss_amount
FROM fa_retirements far, fa_transaction_headers fah
WHERE 1 = 1
AND far.asset_id = p_asset_id
AND far.book_type_code = p_corp_book
AND to_char(fah.date_effective, 'DD/MM/RRRR') >= p_from_date
AND to_char(fah.date_effective, 'DD/MM/RRRR') <= p_to_date
AND far.status = 'PROCESSED'
AND fah.transaction_key = 'R'
AND far.asset_id = fah.asset_id
AND far.book_type_code = fah.book_type_code
AND far.transaction_header_id_in = fah.transaction_header_id
AND far.transaction_header_id_in =
(SELECT MAX (far1.transaction_header_id_in)
FROM fa_retirements far1, fa_transaction_headers fah1
WHERE far1.asset_id = far.asset_id
AND to_char(fah1.date_effective, 'DD/MM/RRRR') >= p_from_date
AND to_char(fah1.date_effective, 'DD/MM/RRRR') <= p_to_date
AND far1.book_type_code = far.book_type_code
AND far1.status = 'PROCESSED'
AND far1.asset_id = fah1.asset_id
AND far1.book_type_code = fah1.book_type_code
AND fah1.transaction_key = 'R'
AND far1.transaction_header_id_in = fah1.transaction_header_id);
Please let me know if u need any help
Thanks
Prasanna -
Problem with depreciation posting for an asset with a '0' net book value.
Hi,
I have a problem with depreciation posting on one asset. I think it should not be calculated and posted at all.
On 1st November 2010 (our Fiscal year starts on 1st November) there was acquisition posted to an asset and then it was reversed on the same day - so the net book value was '0'.
In AFAB depreciation run for April 2011 - it posted depreciatoion of 0.01 Euro, so now the book value is -0.01.
Do you know how this could have happened and what can I do to get the value of this asset back to 0?
Thank you,
KarolHi Murlidhar,
Thank you for your reply.
I just have one doubt - as depreciation of 0.01 Eur was posted in previous period leaving net value of asset equal to -0.01 Eur.
Shouldn't I get ritd of this asset value before I proceed with the steps you suggested?
I think it is not possible to reverse the depreciation - so I struggle to find a way to bring asset value back to zero.
Thank you,
Karol -
Legacy Asset Net Book Value is Zero-Want to post Sale of Asset for the same
I have Scenario
We have upload the legacy Assets in Year 2005. One of the Asset Net Book Value is Zero. When we are trying to post Asset Retirement, the for that Asset following is error message received:
"Retirement of Old Assets data not possible (No Existing old Asset Data).
Though in the books the Net book value is Zero, we have received profit on sale of Asset.
How post the profit on Asset & also how to take it from the gross block.
Thanks
RagsHi,
the e-message stated, that you must use another transaction type:
so not a transaction type with old asset data like 210.
try / test transaction types : 250-275
pls reward useful answers
thx.
Andreas -
Posting Unplanned Depreciation when asset net book value is zero
We recently transferred some assets from one company code to another. However, when they transferred, the depreciation all reversed out YTD.
We are now trying to post the YTD depreciation back in under the original company code, but when we try posting unplanned depreciation, the following error message appears -
"In area 01, you can only post manual dep. up to the amount 0.00"
I believe this is because the asset does not have any net book value now.
Any suggestions on how to resolve this?
Many thanks,Hi Susan,
do you have the option to reverse the transfer postings? If so, you could specify another period control for transfer postings (such as fiscal year start, etc.) in your depreciation key, with which you can influence how much depreciation is left back respectively transferred.
It is correct that you can´t post an unplanned depreciation on the sending asset now, because the net book value would go below zero. As unplanned depreciation does not influence the ordinary depreciation in the year of posting, this value below zero can not be adjusted with a reduction of planned ordinary depreciation.
I am wondering which effect you´d like to have on the sending asset. Did you post a complete retirement? If so, there should be no APC left which you can depreciate on the sending asset. And as the net book value is zero already, which effect do you want to get? You have to keep in mind that the non-depreciated APC will be continued to depreciate (normally) on the receiving asset. But maybe I misunderstood the problem here ...
Regards,
Markus -
Net Book Value - Asset Accounting
Dear Gurus,
I need a clarification regarding Asset uploading in ECC 5.0.
I have uploaded asset balances upto 31.01.07.(Fiscal Year - Apr to March). I have given the acquicition value in the field '***.acquis.val.' and accumulated depreciation upto 31.01.07 in the field 'Accm.ord.deprec'.
When i execute the depreciation for Feb 2007, system is calculation depreciation on net book value as on 31.01.07. But it has to be calculated on the net book value as on 31.03.06.
Please help me in this problem.
Note: Base value - 24 (Net Book Value) in Multi Level Methods.
Thanks & Regards.
GaneshHi Venkat,
When ever you upload asset balances the below two points to be considered.
First, you need to upload the balaces of assets which were not acquired during the current fiscal year(In your case acquired before 31.03.2007)
Secondly, you need to upload the balances of assets acquired during the year (from 01.04.2007 to cut over date (need to be defined in the system)).
You can use LSMW for uploading.
Regards,
Murali
Assign points if useful -
Assets: Net book value 1
Hi experts,
I got the issue that an asset shouldn't be depreciated totally (0) but the net book value of the assets should remain 1 u20AC.
So in the asset explorer the assets has value 1 u20AC, although the depreciation is finished.
Does somebody know, where I can set it in IMG.
Many thanks and best regards,
NikolausHi
Please set the value in
IMG-> Asset Accounting-> Valuation ---> Amount Specifications -
> Specify memo Value.
Regards
Venkat -
Net Book Value calculation Issue Manual Legacy Data Transfer
Dear All
I want to Upload balance of old fixed Asset in newly configure System that are managed manually in previous year, I want to Post Their previous Current Written Down Value and Current Accumulated Depreciation when i go via IMG Create Legacy Data Transfer and enter,
Take Over Value of assets I entered for example
Accusation Value 100,000
Accumulated ordinary depreciation (Old depreciation in Previous Years) RS.10,000
Net book Value Rs.110,000
and system Calculate the Depreciation on 110,000 as WDV 10% that is 11,000
My requirement is that it will Calculate it as 100000-10000
Depreciation should be calculated at a 90000 @ 10% WDV that is 9000
Please suggest me, how i can do.
or other path or T.code where i can do.
i am new please explain in detail.
Regard
Khalid mahmoodDear Atif and AP
Issue is not with Depreciation key it is working well according to my requirement but the issue is that base value that the system use is wrong.
i want that the system calculate depreciation at Cumulative Acquisition value (Purchase /capitalize/ cost price) less Accumulated Depreciation
is equals to Written Down Value.
I want that system use WDV as a base in each year after deducting year depreciation or (Acqusition cost - Accumulated depreciation).
I post a new asset and assign depreciation key it working well as required.
But i going to post Old asset for example Rs.100000 in year 2006. its Accumulated depreciation is suppose Rs.30000 in Year end 2011.
i want to post that asset in year 2012 as 100000-30000 and WDV IS Rs.70000 ;
i want that it will use 70000 as a base in the coming year to calculate depreciation.
My response is 100000+30000 and use 130000 as base to calculate the ordinary depreciation for the next year.
Now Please read the first thread again and guide me according to my scenario.
or tell me how i post the old asset value and their depreciation.
Regard
Khalid Mahmood -
Calculation of Depreciation on Net Book Value after posting Revaluation on
How to calculate the depreciation on Net book value after posting Balance sheet revaluation ABAW? The depreciation is been calculated on APC and not on NBV, as the APC of asset has been revalued after the revalution posting, ideally the next period depreciation should be calculating on the new NBV, but the system is not doing this. Is there any specific configuration that Iam missing here.
Kindly Reply.
JyotiThe forum [FPM - General|Enterprise Performance Management (SAP EPM); in which you originally posted your question deals mainly with the financial performance applications otherwise known as Enterprise Performance Management (EPM) carrying the BusinessObjects brand. Your question pertains to SAP [ERP Financials - Asset Accounting|SAP ERP Financials - Asset Accounting; which is covered by another forum. Therefore your message has been moved. Please adjust any bookmarks you might have and post to the appropriate area in the future, that way you are assured you will have the right audience reading your posts.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team
Maybe you are looking for
-
Question re synching with Ipad under different ICloud account
My question concerns how I sync my ICloud with an Ipad under my wife's email. I have an iCloud account on my MacBookPro, my iphone and my ipad. They work fine. I also want to send my calendar and other info shared on my 3 devices to my wife's ipad.
-
Outlook 2013 archiving doesn't work when cached mode is enabled
Hi All, I have a problem in Outlook 2013 which I've been able to replicate on two separate PCs, operating against two separate Exchange servers. In both cases, archiving of old items does not work in Outlook 2013 when cached mode is enabled. It wor
-
Can't get ApertureToPBase plugin to work
Has anyone gotten the ApertureToPBase plugin to work? When I try to export an image, it just hangs at the login prompt with the 'Logging Into PBase' screen scrolling endlessly (If it's a network issue I would expect it to eventually time-out, but it
-
Hi, Is that possible to activate the BW in a SAP ECC 6.0 with all SAP_BW Support Packages? I kwon that i have to user transaction RSA1 in client 001 but my problem is how to use this transaction. Does any one have a document that i can follow. Thanks
-
Hi. I am very new to Apple. I have had iTunes for quite a while, but just used the basics. I just purchased the new iPad and love it. I have installed iCloud on my pc and, of course, it came on iPad. As I understand it I should be able to store my mu