Calculate result as average in the report not showing average for all

Hello,
I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
2. Aggreagation tab: exception aggregation: Total and reference char: []
Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
Please help me in resolving the issue- why portal not showing value for all.
Thanks,
Vijaya

SAP note solved the purpose.
Thanks & Regards,
Vijaya

Similar Messages

  • ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant

    ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
    - For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this? 
    Thanks
    Kosin Usuwanthim

    It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

  • Checkboxes in BI Publisher not showing up for all reports

    Hi everyone,
    I followed the instructions (uploading fonts, checking the checkbox font property e.t.c) for displaying checkboxes (without the diamond shape) in my BI Publisher reports. It worked for 1 report and still does. Unfortunately the new reports I have uploaded still display the diamond shape. I find this very odd even though followed exactly the same process for all of my reports.
    Is there a way to make sure that checkboxes display properly for all reports? Could there be a mistake I have made and that I am missing out on. Any thoughts will be appreciated.

    Have you set the properties as per
    http://blogs.oracle.com/xmlpublisher/2007/05/wherere_my_checkboxes.html
    especially
    1. The font location, we need to tell the publisher engine where the Wingdings font is located:
    <font family="Wingdings" style="normal" weight="normal">
    <truetype path="c:\windows\fonts\wingding.ttf"/>
    </font>
    2. The glyphs to be used. Here we specify the font family name ie 'Wingdings' and the 253/254 glyphs
    <property name="rtf-checkbox-glyph">Wingdings;253;254</property>
    Do ensure that you use the same glyph character codes defined in ur config and RTF

  • My favicons are not showing up for all my imported bookmarks as well as certain current bookmarks and when I open the about:config it says "browser.chrome.favicons;false". Shouldn't this be true and how to I change it?

    I had to rebuild my computer and when I imported all of my bookmarks they had no favicons. I started getting some of the favicons when I would go to the websight it would reconnect, but now I can't seem to see almost any of them. I did a search on Google and one tech site suggested the about:config file and that the "browser.chrome.favicons;false" should be set to true. But when I toggle it to true and restart Firefox it is once more set to false. I know it doesn't seem like much, but it is really annoying not having those favicons.
    Help me Obi Wan Firefox you are my only hope.

    The browser.chrome.favicons preference should be set to true, as it is not retaining the value when you restart Firefox, see the [[Preferences are not saved]] article for possible causes.

  • Eu_role not showing up for all users in EP7

    Hi SDN,
    I have newly deployed EP7, I want all users to have EU_Role but but its not showing up even though i have added eu_role to everyone group.
    i do see eveyone group attched to all users but it does not show up eu_role to it.
    Am i missing anything in  EP7 Configuration.
    Thanks
    DK

    Hi,
    Go to everyone group and click the tab 'assign role'
    Search for the eu_role recursively(check the box recursive before search). otherwise all roles will not show up.
    Hope that helps you
    Raghu

  • Create prompt inisde the report not the dashboard promt

    Hi All,
    I had this rek today saying that i need to create a prompt inisde the report not the dashboard prompt.can anybody help me how to create the prompt inisde the report.

    Hi,
    In Compound Layout we have the option ->Other Views -> No Results View click on that and Edit the No Result view and Type what you want in Text portion.
    Thanks,
    Balaa...

  • Report not showing the correct layout when executed in Portal

    Hi All,
    We have created 5 different queries in different units of measure for a query. We have included these in a web template, and based on the UOM choosen , the WAD will pickup the queries and provides the desired results.we have executed the report in Portal and created a bookmark for it...but if a different unit of measure, the layout is changing.  Is there any way to create a bookmark which will not change by changing the Unit of measure means a different query.
    Thanks,

    Hello Eranki,
    Take a quick check on SAP Note 1671767 - BEX Variable Screen not showing via portal
    Probably you are having issues related to personalization of your queries or templates on your portal.
    Check it, remove and test again.
    I hope it helps.
    Best regards,
    Edward

  • Some Devices are not showing up at all in the Discovery reports

    Hi all,
    The first time I ran the CS device discovery I got 50 reachable devices. I scheduled the Device Discovery to be run every week. I added more subnets to the discovery but unfortunately the last discovery shows only 31 devices from the first discovered devices (50). I checked the DCR and there is only 44 devices out of the 50!
    My question is:
    Should not the scheduled Device Discovery discovers all devices -the previously discovered ones and the new ones-?
    Why the rest of the devices are not showing up at all in the discovery reports (neither reachable nor unreachable) although all of them are pingable and responding to the snmpwalk tool from the CWLMS server.
    Your kindly respond is highly appreciated.
    Thanks in advance.

    I ran the discovery again with the same settings after enabling debugging and I checked the following log files:
    1. in the ngdiscovery.log I found a lot of errors all about Duplicate IpAddress example:
    ERROR  [DeviceManager : EvalTask-DiscoveryThreadPool-06 addNewDevice]  : Duplicate IpAddress (127.0.0.51) found in addNewDevice().Device 1 ip = 10.8.113.29 , id1 = 127.0.0.51*F1COR.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.106 , id2 = 127.0.0.51*LCD.xyz.com*.1.3.6.1.4.1.9.1.283
    ERROR  [DeviceManager : EvalTask-DiscoveryThreadPool-08 updateDevice]  : Duplicate IpAddress (127.0.0.51) found in updateDevice().Device 1 ip = 10.8.113.93 , id1 = 127.0.0.51*UDS.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.73 , id2 = 127.0.0.51*F2COR.xyz.com*.1.3.6.1.4.1.9.1.283
    ERROR  [DeviceManager : EvalTask-DiscoveryThreadPool-09 addNewDevice]  : Duplicate IpAddress (10.8.113.42) found in addNewDevice().Device 1 ip = 10.8.113.42 , id1 = null, Device 2 ip = 10.8.113.86 , id2 = 10.8.118.251*OPS.xyz.sa*.1.3.6.1.4.1.9.1.501
    2. in the CSDiscovery.log:
    Error while changing the permission of the file C:\PROGRA~1\CSCOpx\objects\csdiscovery\1348\DiscoveryStatusObj
    I checked the file and the casusers has a Modify permission
    My Question is:
    1. what is the meaning of those output exactly?
    2. If CWLMS found duplicatedd IP address how it works in terms of (ignoring, updating existing devices, Adding the new devices, ... etc)
    Many thanks for your help.

  • Report definition for the report not specified

    Hello
    I have written the code  attached but getting the error "report definition for the report not specified"
    string v_report_name = Charts.ReportPermutation.ToString() + Charts.charttype + ".rdlc";
                string v_report_server = "http://MANOJ-PC/reportserver";
                string v_report_path = @"D:/Anshutech New/AnshutechPlusProjectCosting/AnshuProjMgmtSystem/AnshuProjMgmtSystem/";
                this.reportViewer1.LocalReport.ReportEmbeddedResource = "AnshuDataSet." + v_report_name;
                this.reportViewer1.ServerReport.ReportServerUrl = new System.Uri(v_report_server);
                this.reportViewer1.ServerReport.ReportPath = v_report_path + v_report_name;
                this.reportViewer1.ProcessingMode = Microsoft.Reporting.WinForms.ProcessingMode.Local;
                this.reportViewer1.RefreshReport();
    Please help
    regards
    Manoj Gokhale

    Hi kalpesh ,
    According to your description, you want to display a report which hasn’t been deployed to report server in ASP.NET MVC app, right?
    If so, you can add a ReportViewer control in ASP.NET MVC and utilize ADO.NET to provide the data to display the report. For more information, please refer to this article:
    ASP.NET MVC - Handling SSRS reports with ReportViewer – Part I.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • Report not show after submit query in parameter form

    Hi, anubody can help me with this
    report not show after click submit query button in parameter form

    To help you see what is happening, temporarily add DESNAME to your parameter screen. Make sure that DESNAME on the parameter screen has a value before you click the Submit Query button.
    If you are running the report with a local report service (running on your workstation), the value of desname should be the name of your default printer.
    If you are running the report on a network application server based report service you need to specify the name of a printer that is accessible to the server on which the report service is running. Make sure that it is specified in a way that the server can recognize it, e.g. \\printserver_01\HPLaserJ4210.
    Maybe this will help some.
    James K.

  • S_ALR_87013543 report not showing line item correctly

    Hi all,
    The S_ALR_87013543 report or any other cost plan report not showing the line item report correctly.
    eg When the S_ALR_87013543 report executed it showing 100 as a plan value against one of cost element when we double click and go to line item report it showing only one entry of 50 which is wrong.
    when i checked the COSP table for the wbse with that cost element it has two entries with value type 1 and 29. value type 29 says value from sales order and 1 as plan .
    My query is why S_ALR_87013543 report not showing the correct value or shall it not pick the value from value type 29.
    regards
    Shiv

    Hi Preeti,
    Thanks for the updates but one more issue. In one case COSP has a one entry for value type=1 with Busniess transaction SDOR but it was not shown in line item report. it says " no line item were selected". inspite of entry in COSP. 
    Screenshot of report  attached,.
    when i checked the drill down report for line item it says no line item found.
    Any idea what went wrong
    Regards
    shiv

  • Why did the trace NOT show the other switches in between?

    I have a PC that is connected to a switch (A) in a network. Switch A has many switches in between and connects to another switch B. When I did a trace to the server, the last switch I see in the result is switch B. Also, when I checked to which port of switch B that the server was connected, It showed as Po1. When I did a show cdp neighbor for the interfaces for the interfaces involved inthe bundle, I get a switch and then another. Why did the trace NOT show the other switches in between? Why did I get an arp on Switch B? Could some one explain?

    It's hard to tell, but if you have L2 switches, the addresses on those L2 switches are for management purposes only and you won't see a response from a trace. The only time you'll see a response is when the packet is routed between devices and not switched. You'll get an arp request/response across a single vlan. If you have vlan 10 across 10 switches, all 10 switches will see an arp request because they're broadcasted throughout the whole vlan.
    HTH,
    John
    *** Please rate all useful posts ***

  • EWA Report not being sent for two systems

    Hi Experts,
    We are having one issue in EWA Report in solution manager. Searched hard but could not find solution.
    Our solution manager is configured to provide EWA for 4 systems- ECC, BW, PI and Solution manager itself.
    The configurations are in place to the extend that we are able to view the weekly reports in Solution manager.
    Issue is -
    1. We are able to recieve mail notification for Solution Manager and ECC but not able to get for BW and PI.
    2. The ECC report is coming ok, but Solution manager report is blank.
    The places I checked the configuration -
    1. SDCCN for all systems.
    2. SOLMAN_EWA_ADMIN - all systems active and chcked for EWA
    3. Background Jobs for all systems -Maintenance Package, Refresh Session, Earlywatch Alert for Solution Manager
    4. Background Jobs related to the task including SM:EXEC SERVICES
    Later on I deleted and rescheduled the job SM:EXEC SERVICES to make sure it covers all systems.
    Data is visible in Solution Manager but report is not being sent over mail for two systems- BW and PI.
    Solution manager report is being sent but empty.
    Please suggest.
    Regards,
    Sabita

    Hi,
    what is your ST verison? check this note applicable or not
    [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931]
    and chek the version of your service updated ST_SER too, patch this also solve the issue
    refer this [Note 1482818 - Service updates ST-SER 701_2010_1|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0001482818&nlang=E]
    Jansi

  • Hi,  We are developing quite a few excel worksheet reports. The reports dont show the cells if contain formulas ( when opened in iPad or ipod  ),  is there any good solutions .

    Hi, 
    We are developing quite a few excel worksheet reports.
    The reports dont show the cells if contain formulas ( when opened in iPad or ipod  ),
    Is there any good solutions .
    Thanks.

    There is no version of Excel for iPads.  iPads come with something that lets you view the contents of Excel files but it implements only the common easy features and there are (literally) hundreds of things you can do in Excel that it doesn't know how to show on the screen, including some functions.
    If you intend to work with spreadsheets on an iPad I suggest you buy Numbers for iPad
    http://www.apple.com/apps/iwork/numbers/
    which understands more (but still not 100%) of the things that Excel does.  It is so cheap that you can probably afford to buy a copy just to see whether it does what you want.
    If you are doing things with spreadsheets and intend to be primarily working on iPads then I suggest you actually use Numbers on a Mac as well, rather than using Excel at all.

  • Crystal reports not show in my browser

    i am using vs 2013  sap sp9  reports show in tools crystal reports  but i am run in browser reports not show in browser 

    Hi,
    I am afraid that this issue is related to third-party, and it is not supported in these forums.
    Crystal Reports are supported on
    http://scn.sap.com/community/crystal-reports.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for