Calculated Key Figures in Query Designer - translation

Hello Experts,
I created a few Caclulated Key Figure in the Query Designer. They have a GUID and a text description.
I would like to know:
1) How these CKF are represented in ABAP on the system and where I can find them - some database table ?
2) If I want the description to be available in many languages how can I handle this ?
Thanks a lot
Rado

Check this
Tables analysed by analyze_rsz_tables
Khaja

Similar Messages

Sort data by key figure in Query Designer

Hi Gurus,
Is it possible to sort a query according to a key figure from Query designer?
Thanks

Using condition TOP N is the solution

Restricted/Calculated Key Figures in Query vs MDX?

Hello All,
We are embarking on our first project utilizing SAP BW as the Data Warehouse and Web Intelligence as the presentation tool.
We plan on creating the universes on BW Queries.
What are the pros and cons of using Restricted and Calculated Key Figures in the query versus creating them in the Universe? Also from a performance impact point of view if there is any?
Best Regards,
Dan Krieg

Hi Dan,
I would suppose that there is no big influence on performance. If the calculation for the calculated key figures are very complex I would propose to calculate them on query level. So its easier to use them also in other environments.
Please take into consideration that OLAP universes are not supported in Crystal Reports. More information you find in the thread [OLAP universes and Crystal Reports|OLAP universes and Crystal Reports;.
Regards,
Sebastian

Currency translation for a restricted key figure in Query designer

Dear Experts,
In my query i am using a restricted Keyfigure (ZRKF1 which is reusable). I have to change the currency translation key of the restricted Key Figure from zcur1 to zcur2. I am not able to edit zrkf1 Currency translation in the properties( It is in gray colour) ,while i can do it for a normal keyfigure. if i edit zrkf1 then other queries will be affected. How should i solve this? Can i copy and paste the zrkf1 to zrkf2 in order to use zrkf2 with currency translation zcur2 in my query ? How can i coy and paste restricted key figure?
Thanks,
Riya

Hello Riya
I think you can't change the currency transaltion type for RKF... to change it in RKF just make the changes in the KF which you have used in RKF....
If you don't want to change the CURR translation type in KF1 than copy it paste it (KF2)and change in that KF2...now u can use KF2 in restricted KF...
Thanks
Tripple k

Aggregation ---Settings of KF(Key Figure) in Query Designer

Hi,
What is the impact of the following setting in the query result
Query Designer>KF Definition>Edit-->Aggregation (TAB)
Exception Aggregation-->MAximum and
Ref Characterstic
Thanks

Hi,
To enable the calculation of key figures, the data from the InfoProvider has to be aggregated to the detail level of the query and formulas may also need to be calculated. The system has to aggregate using multiple characteristics. In regard to a selected characteristic, the system can aggregate with another rule for each key figure (exception aggregation).
http://help.sap.com/saphelp_nw04s/helpdata/en/75/21054da1392649948e5b94e4fc4bce/frameset.htm
Exception aggregation ?
http://help.sap.com/saphelp_nw04s/helpdata/en/43/53717c223a1bcde10000000a1553f7/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/47/4d6d902dbb22c5e10000000a42189d/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/47/5dfdca3ea9427fe10000000a42189d/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d2/e0173f5ff48443e10000000a114084/frameset.htm
Rgs,
I.R.K

How to copy restricted key figures in query designer ?

hi,
i have created a query in query designer (BI 7.0).
How can i copy existing restricted key figures ? i can't find anything. i always have to create a new one, and then i have to do all the things like 'details of selection' etc.... manually. that CANNOT be, there MUST be a way to copy those key figures.
any ideas ?
best regards, Martin

Hi Martin,
Restricted key figures can be stored on the infoprovider basis . For which right click on the key figure (left hand side pane ), Select the necessary key figure and assign the restriction through characteristics combination, and give it a restriction and save it . Next tiem when you create query on the same info provider it should appear in the left hand side as readymade reusable piece .
Hope that helps.
Regards
Mr Kapadia

How to search for Key Figures in Query Designer 7.0?

Hi,
in BEx Query Designer 3.5 there was a search function to look after key figures or characteristics. Is there a search function in Query Designer 7.0?
Thanks.

Hi,
QD 3.x version has "Find" option to identify the KF and Characteristics,but the same is not available with QD 7.x.
Reason could be:
With QD 7.x,just by typing the starting letters of KF or Characteristics by Keyboard itself,it will highlight you the entries.Hence there is no explicit Find option provided.But in case of QD 3.x,they gave it explicitely.
Rgds,
Murali

InfoSet - Calculated Key figures in query

Hi
I created an InfoSet from two cubes, and a query to report from the InfoSet , I noticed that the query displays the keyfigures twice, e.g., I have gross sales in both cubes so it appears on the left side of query designer twice. When I created the InfoSet I turned off these key figures but they still appear on the left side of the query and doubled.
Any suggestion?

This might be b'coz you didn't select which infoprovider the Key figures should be picked from.
Hence it's select both the infoprovider and displaying the values twice.
Regards,
Hima

Restricted Key Figure in Query Designer

Hi,
I have defined a Input-Variable on the Characteristic 0PURCH_ORG (Purchasing Org.) in the Query Designer.
This Variable is Mandator and represents "Selection Option". Means, the user has to give the Input-Varaible for ex. 0010...0011.
Now my requirement is to define a restriced key figure where these Purchasing Org. from Input-Variable must exclude
in the restriced key figure. I cannot exclude the Input-Varaible in restriced Key Figure as it represents "Selection Option".
I tried to define a Customer-Exit Variable (Selection Option) on the Characteristic 0PURCH_ORG which should exclude the Input-Variable.
But the ABAP-Code for Customer-Exit Variable doesn't work.
Any clue, how I can solve this problem?
Thanks

Hi Moha Nan,
A variable of the type selection option can not be excluded therefore a variable exit is your only option. What is the current ABAP you have written and why doesn't it work? Maybe we can find the issue with the coding.
You need one variable of the type selection option and another one to read the first variable and reverse the option sign (from include to exclude).
Regards,
Alex.

Creating a resticted Key Figure in Query Designer (3.5)

Hello, hope your all well!
I'm trying to create a restricted key figure that's related to the publication date of one of our titles.
I've tried to create a Structure that shows one text result if the publication date is the same or greater than 01.01.2008 and another if it's less. However, in my results it seems to be bringing two results for each line, one with each text result.
Could anyone point my in the right direction?
Have a fantastic weekend,
Rhys

Sorry, I'm new at this; what do you mean by inputs?
I'm trying to create something in the query designer that displays one text result if the result is lower than a certain number and another if higher,
Hope that makes sense.
Take care!
Rhys

Error in total of Key figure in query designing

Dear Friends,
I am new at query designing & am stuck in a problem.
I have a CKF named Load in the column.
When I select District & Complaint No.in rows the result is some 100 rows and upon exporting the result in excel & summing up load the total comes out to be right..............................
BUT in web browser when i choose only District in the row and the result is a single row the sum of load displayed is incorrect.............wht cn b the possible reason of this??
Thnx in advance.

Hi Dear, i asume every districwise total also calculated. pls check onemoretime.
Regards
Amulu

Percentage with calculated Key figure in queru designer

Hi,
I have this problem with query designer.
I want to calculate a share over sub total in a query with 3 characteristic exploded: one in vertical (project)
and 2 in horizzontal (quarter and year). I am using query designer 7.0.
I have created a calculated KF with function CT% but, instead to have the percentege over subtotal, I have the percentege over total.
This is the example of what I would like to get:
                    quarter 1                                               2
                        year 2007                 2008                 2007                  2008
                                Cost   % cost    Cost   % cost    Cost   % cost     Cost   % cost
Project
Total                        27365    100%      30155   100%   29300   100%   29875   100%
PRJ 1                        820      2,99%     1100     3,65%   930     3.17%   860     2,88%
Could anyone help me ?
Thank you !
Bye.
Elena

Hi,
create two restricted keyfigs:
KF1 restricted to one of your 0CALYEAR
KF2 restricted to the other year
Create a formula or CKF, KF3 = KF1 - KF2
Implement your TOP N condition on KF3
hope this helps...
Olivier.

Calculated quantity evolution in Query Designer

Hello,
I have a few short questions regarding ways of calculating a quantity evolution key figure in Query Designer:
I have a sales figure, let's say an order quantity. I'd like to have it's evolution calculated and displayed (based on another variable with a time period selection) next to it.
- Is there any other way of entering the following formula for the calculation then: (figure A - figure A(N-1)) / figure A (N-1) * 100 ?
- I would like to have a positive sign when this calculated evolution is positive as well as the percentage symbol next to it (eg: +15%). Is there a way to do this?
- Is there a way to automatically fill the time period selection for the variable (using for example a current week - 1)?
Thanks for your proposals.
Best regards,
Olivier

Hi there:
I think i understand what you are asking for. I just did a similar calculation myself after lot of research. Hope i can save you that trouble.
We calculated Change from prior week key figure this way.
In our Open Sales Order Position Report we have Open Order as of a particular day. But users want to know how their open order position changed from last week as of sunday of last week.
We came up with a solution to create an open order position snapshot InfoCube and store the Open Order value in that cube as of every sunday. The data will be delieted every sunday and reloaded via APD from the current open order position InfoCube.
We run a query on the open order InfoCube to get the total open order position based on different characteristics of interest.
Then load it to a DSO with direct update using APD.
Then we load it from this DSO into the prior week infocube.
Then we have a MultiProvider which puts the current open order InfoCube and the Prior Week Open Order InfoCube.
We created a query on this MultiProvider which gives both the current open order position and last week's open order position and we make a cacluation to subtract the two to give us the change from prior week.
If we need a percentage we can calculate from this difference using percentage function.
When we load to prior week open order InfoCube, we use System Date function available in the transformation by formula to calculate the 0CALWEEK to store the week of the prior week data.
In the query i have a key figure for current open position and another key figure for prior week open position each restricted by InfoProvider.
If you are not deleting the prior week data every week, you can add a restriction in the prior week open position as (0CALWEEK -1) so it will always get only last weeks data.
Hope this makes sense.
Good Luck.
MP.

Currency Translation on Calculated Key Figure in BW7.0

I am trying to use a currency translation in BW7.0 on a calculated key figure. Unfortunately the options for this are greyed out in the conversions tab for the calculated key figure.
I took a simple example. I have a KF that is revenue. I put this KF in the query and I can specify the conversion for it.
I then took the same KF and put it as the only argument for a CKF. For this CKF whether it is local to the query or a global CKF, I cannot specify a currency conversion.
If I do the same experiment in the 3.5 design tool, I am able to specify the currency translation.
Is there some system setting that enables it in the 7.0 query designer?
Thanks.
KB

Hi,
Have a look at the links:
http://help.sap.com/saphelp_nw70/helpdata/en/80/1a682de07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f1/0a5529e09411d2acb90000e829fbfe/frameset.htm
Best Regards,
Rajani

Currency translation problem for calculated key figure

Hi All
I have a problem with the currency translation for a calculated key figure.
I have a requirement to show the MM consignment stock value in the specified currency from the selection screen.
For consignment stock, there is no value maintained in the system. So for this we need to calculate the value as below
Restricted key figure: RKFConsignment stock: Total stock with special stock indicator restriction "K"
Calculated keyfigure: Consignment stock value = Nodim( RKFConsignment stock) * (Standard cost / price unit).
Here, in the calculated keyfigure properties --> I have used a currency translation for the 0CALMONTH.
The query has selection on the 0calmonth.
But in the result the I am getting unexpected results.
Do we have any inconsistencies in the currency translation on the formulas?
Please help me on this.
Regards
S.R

Hi All
I have noticed something. I changed my query date selection to Calendar day - Keydate instead of calendar month.
And I have changed the currency variable to fixed exchange rate "CHF", it is working fine.
I think I have some problem with the currency translation variable.
Could anyone of you please send me the currency translation variable for Calendar month with the below parameters
exch rate type : M
Time reference : 0CALMONTH
End of month
Target currency for a variable : < var created on 0currency>
For my report, i need calendar month selection, currency selection.
Please help me with your ideas.
Thank you
Regards
S.R

Calculated Key Figures in Query Designer - translation

Similar Messages

Maybe you are looking for