Calculated value on ID column in list when new form is saved

i have a calculated column which just takes the value of ID as "=[ID]"
now when i enter a new record , it works fine.
But, when i edit hte record and then click save without doing anything, the value of changes to 0.
for example if hte ID is 6 when entering the new record, if i edit the record and save it, the calculated column is reset to 0.
please help

In case of both Item added and Item updated use workflow instead of calculated columns when you want to use ID within your calculated columns.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Similar Messages

Populating a Pop List via WHEN-NEW-FORM-INSTANCE

Vendor provided a form that attempts to populate a pop list within a WHEN-NEW-FORM-INSTANCE trigger. Unfortunately when the user enters the form there are no values in the list. User has access to the table (verified by running SQL of cursor in SQL*Plus). Here is the trigger:
BEGIN
G$_SET_INST_PROPERTY;
G$_CHECK_FAILURE;
G$_STARTUP;
G$_CHECK_FAILURE;
     DECLARE
     CURSOR SFTVDTYP_C IS
     SELECT SFTVDTYP_CODE,SFTVDTYP_DESC FROM SFTVDTYP ORDER BY SFTVDTYP_DESC;
     i number := 1;
     BEGIN
     Clear_list('SFDBCOND_DTYP_CODE');
     for SFTVDTYP_REC in SFTVDTYP_C loop
     Add_list_element ('SFDBCOND_DTYP_CODE', i, sftvdtyp_rec.sftvdtyp_desc, sftvdtyp_rec.sftvdtyp_code);
     i := i+1;
     end loop;
     Set_item_property ('SFDBCOND_DTYP_CODE', REQUIRED, PROPERTY_TRUE);
     :SFDBCOND.SFDBCOND_DTYP_CODE := get_list_element_value('SFDBCOND_DTYP_CODE', 1);
     SYNCHRONIZE;
     END;
END;
Vendor claims that other sites this is working perfectly. Any ideas what has gone wrong at our site?

seems like the select is not returning any values.
try to put a message inside the cursor-for-loop to see if how often it loops.

Populate two poplist items on when-new-form-instance trigger

Hello!
I have a simple form with some text-items, datetime items, two poplist items and two buttons (exit and save to database).
Everything works well except the second poplist wont get populated. After wrote the code for the first i just wrote a similar one for the second poplist. Each poplist fetches its data from different tables. Nothing changed when i tried different list-item types (first worked, second didnt).
Here is the code in the when-new-form-instance trigger:
declare
     rg_query_sponsori varchar2(200) := 'select nume, sponsor_id from sponsori';
     rg_id_sponsori recordgroup;
     err_sponsori NUMBER:= 0;
rg_query_portari varchar2(200) := 'select nume, portar_id from portari';
     rg_id_portari recordgroup;
     err_portari NUMBER:= 0;
BEGIN
     rg_id_sponsori := create_group_from_query('recgrp1',rg_query_sponsori);
     err_sponsori := populate_group(rg_id_sponsori);
     clear_list('vizitatori.sponsor_id');
     populate_list('vizitatori.sponsor_id',rg_id_sponsori);
     rg_id_portari := create_group_from_query('recgrp2',rg_query_portari);
     err_portari := populate_group(rg_id_portari);
     clear_list('vizitatori.portar_id');
     populate_list('vizitatori.portar_id',rg_id_portari);
END;
Thx and have a nice weekend :)
Iulian

Try this by adding delete_group
declare
rg_query_sponsori varchar2(200) := 'select nume, sponsor_id from sponsori';
rg_id_sponsori recordgroup;
err_sponsori NUMBER:= 0;
rg_query_portari varchar2(200) := 'select nume, portar_id from portari';
rg_id_portari recordgroup;
err_portari NUMBER:= 0;
BEGIN
rg_id_sponsori := Find_Group('recgrp1');
if not id_null(rg_id_sponsori) then
delete_group('recgrp1');
end if;
rg_id_sponsori := create_group_from_query('recgrp1',rg_query_sponsori);
err_sponsori := populate_group(rg_id_sponsori);
clear_list('vizitatori.sponsor_id');
populate_list('vizitatori.sponsor_id',rg_id_sponsori);
rg_id_portari := Find_Group('recgrp2');
if not id_null(rg_id_portari) then
delete_group('recgrp2');
end if;
rg_id_portari := create_group_from_query('recgrp2',rg_query_portari);
err_portari := populate_group(rg_id_portari);
clear_list('vizitatori.portar_id');
populate_list('vizitatori.portar_id',rg_id_portari);
END;

WebUtil doesn't work when called from WHEN-NEW-FORM-INSTANCE trigger

I need WEBUTIL_CLIENTINFO functions to know some information from the client, like IP, JavaVersion, Hostname, OS user, etc. This functions I call through WHEN-NEW-FORM-INSTANCE TRIGGER and this doesn't nor work. I obtain the next message and error:
oracle/forms/webutil/clientinfo/GetClientInfo.class not found. WEBUTIL_CLIENTINFO.GET_IP_ADDRESS.
But when I call this WebUtil functions through WHEN-WINDOW-ACTIVATED trigger or through a button it works. Why?. I need call WebUtils in the WHEN-NEW-FORM-INSTANCE trigger!
Any help will be of great value.

Basically make a timer...
Do you have the wu_test_106.fmb file that comes with the webutil install?
If you look in the wnfi trigger you will see this...
declare
     fake_timer TIMER;
begin
     -- Purpose of the fake timer is the we cannot call webutil in this trigger since the
     -- beans have not yet been instantiated. If we put the code in a when-timer-expired-trigger
     -- it means that this timer will not start running until Forms has focus (and so the webutil
     -- beans will be instantiated and so call canbe made.
     fake_timer:= CREATE_TIMER('webutil',100,NO_REPEAT);
     --create_blob_table;
     null;
end;And in the form level when-timer-expired you will see this...
     :global.user_home := webutil_clientinfo.get_system_property('user.home');
     :OLE.FILENAME := :global.user_home||'\temp.doc';
     SET_ITEM_PROPERTY('builtins.text_io_item',PROMPT_TEXT,'Write to '||:global.user_home||'\helloworld.txt');
     SET_ITEM_PROPERTY('files.userdothome',PROMPT_TEXT,:global.user_home);

When-new-form-Instance trigger raised unhandled exception ORA-04062

Hi,
We are facing ORA-04062 (FRM-40735 WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA 04062) while trying to run the first form of our Application.
We are using a PL/SQL LIBRARY(.pll) for forms.
We are using 10G Application Server,10G DB and Oracle 9i Forms.
DB Version----10.1.0.4.0
Application Server--9.0.4.0
During compilation, we are following the below steps:
1. Compile the .pll
2.Compile Forms.
When we are running these compiled version of forms and pll in Development server where we are compiling it,we are not facing any error.
But when we are taking these compiled version of forms and pll to the Production Server,we are getting the above error.
When we are compiling the .pll in Production server, Application runs fine.
But we should not compile form or pll in Production server.
Searching in Metalink(Note:73506.1) , we find a solution that remote_dependency_mode if set to signature this problem may be resolved.
We tried that by chaning ' REMOTE_DEPENDENCIES_MODE=SIGNATURE' in Init.ora file in both Production and Development server.
But the error still persist.
I think the problem is regarding .pll.Because for the time being to test the application,I compiled the pll in Production and we didnot get any error while running the Application.
But whenever we are tring to deploy the compiled version of pll (compiling in Development sever) and to run the application in Production, we are facing the error.
Also, pll calls one standard database package in SYS.That standard package has VALID status both in Production and in Development.
We donot have priviledge to change/compile that package.So,we didnot change anything in that package. We didnot change anything in .pll also.
We are upgrading our forms from 6i to 9i.And now when we are trying to deploy it to Production we are facing ORA-04062 error.
Can anyone please help ?

Exactly what procedure or package in SYS are you calling that causes this problem?
Are both test and production databases at the same version?
Do you know what procedure or package is named in the error? If not, then you need to improve your on-error trigger processing. I use a PLL_On_Error trigger to capture and improve a number of Oracle messages. It is posted here:
 Re: FRM-40735:Pre_Insert trigger raised unhandled exception ORA-20011
Note especially the part near the end that deals with FRM-40735. (Not sure, but you may also want to display DBMS_ERROR_TEXT in your situation.)
If that doesn't help find the actual problem, I would pull out my Re: Zdebug -- Download a Forms debugging message tool, and add messages before every call in the when-new-form-instance process to zero-in on the offending call.
If it really IS a call to a system process, I would then experiment with creating a server-side package or stored procedure that calls the process, and then call that stored procedure from my form. That way, you effectively insulate your form from system differences.

WHEN-NEW-FORM-INSTANCE trigger does not fire

Hi,
Does anyone have any idea why code placed in the when-new-form-instance trigger appears to be ignored when the form is executed from one login but runs fine when executed from another? A breakpoint on the first executable line of code in the trigger confirms that the trigger is not being fired.
Regards,
Ian Dodds.

Hi again Duncan,
I was able to solve it once I ran the form with the Forms Runtime Diagnostics enabled. I had a table in my schema containing old data used to build menu items. This was causing runtime errors to occur during calls to SET_MENU_ITEM_PROPERTY that were not being propagated to the UI so I didn't know they were occuring.
The upshot was that the WHEN-NEW-FORM-INSTANCE trigger was not firing. Once I corrected the data it worked a treat.
Thanks very much for pointing me towards FRD, it's the first time I've used it but it won't be the last.
Cheers,
Ian.

How can i change the code in when new form instance trigger using JDAPI

Hi all,
Can anyone tell me how can i use JDAPI to modify the when-new-form-instance trigger in all my forms,coz we have around 500 FMB's ,if this is possible by using jdapi it will be better for us..
Thanks in advance..
Najeeb

Hi Najeeb,
The code I've given you should cover the basic steps - you will need to have a basic knowledge of Java if you want to use the JDAPI, there's no way around that unless you go and buy one of the off-the-shelf products for this kind of thing (I think there's one called orcltoolbox..?)
I've written an application that does all kinds of things to Forms specific to our needs, so it's a bit tricky to just pull out the code you need, but again, the basics will be:
String formName="C:\some_dir\some_form.fmb";
FormModule mForm=FormModule.open(formName);
Trigger myWNFITrig=Trigger.find(mForm,"WHEN-NEW-FORM-INSTANCE");
String myText=myWNFITrig.getTriggerText();
And there you have your trigger text, to do with what you please. You could put this code in the main() method of one class if you want to keep things really simple - but see how you get on, if you have any more specific questions, do come back.
Eric - that's a very good point about using Regular Expressions. I haven't used them in my JDAPI app because I wanted to keep all my .fmbs 6i-compatible for the short-term, and a posting I saw somewhere recommended sticking to Java 1.3. Which rules out the regex facility, which only appeared in Java 1.4. Now, though, I think I needn't have worried - it surely shouldn't matter which version of Java I use to make the changes to the .fmbs. My stupid!
James

Webutil-Problem (not the usual "PRE-FORM", "WHEN-NEW-FORM-INSTANCE" etc.)

Hello,
We have an application with lots of modules, where we use webutil to create text files on the client for data exports. The export is called in a WHEN-BUTTON-PRESSED Trigger and usually works fine, but we have the following problem:
If two modules, where webutil is used, are opened at the same time and one module is closed, webutil does not function anymore in the other module. If we then try to create a text file after closing on module, we get the following error-message:
Oracle.forms.webutil.file.FileFunctions bean not found.
WEBUTIL.FILE.FILE_SELECTION_DIALOG_INT will not work.
It’s not only the FileFunctions bean, all other webutil functions do not work also anymore in the remaining module.
This is not the usual “PRE-FORM”, “WHEN-NEW-FORM-INSTANCE” etc. Webutil-Problem.
As I said before, webutil works, but when we close one module with webutil used, it does not work in another open module anymore.
Any Idea, why this happens and how to solve the problem???
Kind regards
Udo

Hello,
Yes, both modules work in the the same session and session is not disconnected, when one of the modules is closed.
Webutill.pll is attached on both forms and all forms in our application using webutil usually work fine with the exception mentioned above.
It's a bit difficult to explain, what happens in our application, but I try:
Our application consists of modules that call other modules with call_form or go_form , when the module is open, all in the same session. "Global" Parameters are passed with SHARE_LIBRARY_DATA. Usually the calling forms stays open.
In the following constellation webutil does not work anymore at a certain point :
- Open module A (with webutil attached) and webutil works
- Then module A calls module B (with webutil attached) and webutil works in module B
- GO_FORM (module A) and webutil still works (while module B is still open)
- CALL_FORM (module C) (in our case webutil is not attached to this module, but I think that is not the problem) module C closes module B (while module A stays open)
- After making a choice in module C, module C closes itself with EXIT_FORM.
- Go back to the open module A, make a new query with the choice made in module C and webutil does not work anymore in module A
Regards
Udo

FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled except ORA-06508

Dear Colleague,
I am migrating a Forms application from Forms 9i to Forms 10g. Most of my forms were originally created using the Oracle Designer Forms generator. I am also using the Webutil plugin. I just finished configuring Webutil, tested it and it seems to be working fine.
I am able to compile all code and generate a Form executable. However at runtime, I get an error as soon as the first line of code in the WHEN-NEW-FORM-INSTANCE trigger.
The error is:
FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-06508
and the beginning of the code is as follows. Using the debugger, I found out that the line:
CGBS2$.SET_COORD_STYLE( 'P' );
initiates an error.
/* CGLY$INIT_CANVASES */
/* Call procedure to ensure correct canvases are visible */
BEGIN
CGBS2$.SET_COORD_STYLE( 'P' );
CGBS2$.SET_QRY_ON_ENTRY( 'Y' );
CGBS2$.SET_NAV_FROM_BLOCK( 'PROJ_BLOCK' );
CGLY$CANVAS_MANAGEMENT;
END;
Is the error telling me that this procedure was not found? How can I proceed to find the cause and solution of my problem? Are one of the Oracle Designer Forms Generator libraries missing?
I would appreciate a tip to help me begin seeing the light at the end of the tunnel.
Thanks and regards,
Randy

Randy,
Glad I could help and you've got your Form running.
@user9230833
It is consider "bad form" to usurp another's post. Please create your own Forum post and include a link or links to any relevant posts. As to Randy's situation, he simply compiled the Forms 9i Library module (.pll) with Forms 10g's compiler. This may not be the cause of your error. When you post your own question, please include your Forms version (full version [eg; 10.1.2.0.2] not the release [6i, 9i, 10g, etc]). Also include any sample code that might help us help you! ;-)
Craig....

40735 WHEN-NEW-FORM-INSTANCE-TRIGGER raised unhandled exception ORA-06502

After migrationg my form from 6i to 10g I am getting the 40735 WHEN-NEW-FORM-INSTANCE-TRIGGER raised unhandled exception ORA-06502 err msg. the field is a date field and should be automatically populated with sysdate- 365. but when i open the form to run it is not populated automatically. i have to enter the date manually. the code in the NEW-FORM-INSTANCE trigger is as follows:
declare
record_id RecordGroup;
error_cd number;
begin
-- Set the main window properties
set_window_property(forms_mdi_window, window_state, maximize);
-- Menu Security
set_menu_items;
select sysdate - 365
into :start_date
from dual;
end;
I check the property palate for the start_date field and it looks ok. the form is working fine in windows but the above message is comming out while running the form in Unix.
Any help will be greatly apreciated.

First thing, try qualifying the start_date with the block name
declare
record_id RecordGroup;
error_cd number;
begin
-- Set the main window properties
set_window_property(forms_mdi_window, window_state, maximize);
-- Menu Security
set_menu_items;
select sysdate - 365
into :block.start_date
from dual;
end;

FRM 40735 : WHEN-NEW-FORM-INSTANCE Trigger raised unhandled exception

Hi all,
I'm from a support team.
Here we have a 3 database in 2 servers connecting to a single application.
Only one Db will be connected at all time , other DB's are backup.
Here the issue is 2DB DBs residing on the same server were able to cennect to the application and doesn't through any error. But the 3rd one in different server gives the below error,
FRM 40735 : WHEN-NEW-FORM-INSTANCE Trigger raised unhandled exception ORA-06508
The Forms were compiled using the First DB , that time when i access the app using the 3rd db i'm getting the above error.
But when I compile the form using the 3rd DB and connect to the App its working fine (The size of the form gets reduced during the compilation).
Thanks for your help in advance.
Srinivasan.K

Could be a timestamp vs signature issue - forms is calling a database procedure in the WHEN-NEW-FORM-INSTANCE trigger and the procedures have different compile times on the different dbs and it's set to use timestamp to determine if a procedure has changed. You can change remote_dependecy_mode = 'Signature'.

FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-01

Hello,
when I run my form I am getting the following error:
FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-01422
My WHEN-NEW-FORM-INSTANCE trigger is calling to procedures. below is the code in my trigger
begin
Get_User_Info;
Get_org_num;
end;
what could be the problem ?
thanks in advanced,
AJ

One of your procedures must be doing a "select into" but the select is returning more than one row. Examine the queries your procedures are doing.
Gary

Direction Needed: Storing calculated values from datagrid column in order to call values into graph

Hi all,
I am new to Flex/Flash Builder, actionscript, and mxml, so please be kind.
I have developed a small program that has a component that displays a datagrid fed with information out of a mysql db via a php data services connection. Within that same component (page), I have a graph that charts the dates via a plot chart. I am interested in adding a line series to the graph, but the data I want to use is a calculated field in the datagrid which I used a custom lable function to derive and display. Can someone steer me to the correct method to store such values and how to call them into a chart?
Some addition information
Custom label function:
/* Custom label function for the Delta1 column. Calculates the number of days between the planting date and 10% flower. */
 private function calculateTo1stFlower(item:Object, column:GridColumn):String {
 var tempDate1:Date = new Date(item.dflower10 - item.dplanting);
 return Math.round((tempDate1.time / MS_PER_DAY) + 1).toString();
/* Number of milliseconds in a day. (1000 milliseconds per second * 60 seconds per minute * 60 minutes per hour * 24 hours per day) */
 private const MS_PER_DAY:uint = 1000 * 60 * 60 * 24;
Within my spark datagrid
<s:GridColumn width="30" headerText="Δ1" labelFunction="calculateTo1stFlower" ></s:GridColumn>
I assume I need to store the array of values for this column and then chart the saved values as the xField within the LineSeries. Should I use a class based model?
The following link seemed like it may be an appropriate path; I am not sure though.
http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7b51.html
Thanks in advance for any support,
Matthew

Thanks for trying to post DDL, but you have no idea how to do a data model. You do not know that tables have to have keys, what ISO-11179 is, etc.
You have a table that is supposed to model companies. Your singular names says that there is only one company! There is no company identifier (the industry standard is the DUNS). A customer is not a company. We do not use numeric data types for identifiers;
do you do math on them? NO! The attribute property comes after the attribute name (you never heard of ISO-11179).
Think about how silly VARCHAR(1) is.
CREATE TABLE Companies
(company_duns CHAR(9) NOT NULL PRIMARY KEY,
company_name VARCHAR(30)NOIT NULL,
margin_oil INTEGER NOT NULL,
margin_hangar INTEGER NOT NULL,
margin_cleaning INTEGER NOT NULL);
INSERT INTO Companies
VALUES (1, 'AviatKorea', 100, 125, 200),
(2, 'AXHollande', 50, 40, 30),
(3, 'BFXNorway', 60, 80, 600),
(4, 'EEEFrance', 10, 25, 60);
CREATE TABLE Company_Tariffs
(company_duns INTEGER NOT NULL
REFERENCES Companies(company_duns),
tariff_type CHAR(1) NOT NULL
CHECK (tariff_type IN ('A','B','C','D'),
PRIMARY KEY (company_duns, tariff_type));
INSERT INTO Company_Tariffs values (1, 'A'), (2, 'C'), (2, 'D'), (3, 'A'), (4, 'A'), (4, 'C'), (4, 'D')
SELECT * -- do not use * in production code
FROM Companies AS C,
Company_Tariffs AS T
WHERE C.company_duns = T.company_duns;
>> I would like something like with a computed column [ ] that retrieves the different contracts used: <<
You might but a SQL programmer would not. This violated First Normal Form. It is a display report and is done in the presentation layers.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Task List - Create New Form for Subtasks

Hi, Is this possible to create a new form for SubTasks in SharePoint 2013 task List
probably using Infopath. Out of Box, Sharepoint opens datasheet view to add the subtask for a main task. just want to know whether it is possible.
Any help will be highly appreciated
Ram Sharma

Hi Ram,
Per my understanding, you want to create a New Form for creating sub tasks.
By default, the subtasks can only be created in the datasheet view, which means that there are some fields of a task cannot be filled in when subtask created, what’s
more, there is no OOTB feature can meet this requirement.
Actually, a subtask is also a normal task, the difference is that it can be connected with the parent task through a property “ParentID”. Let’s say if there is a task
with “ID” 1, then the “ParentID” of its subtasks will be “1;#1”.
Thus, as a workaround, you can create a custom New Form page with the extra “ParentID” field to be filled in. After submitting, a new task will be created, because
the “ParentID” has a value which points to another task, this new task will be a subtask now. This can be done with Client Object Model programmatically.
About how to work with Client Object Model:
JavaScript Client Object Model
http://msdn.microsoft.com/en-us/library/office/hh185006(v=office.14).aspx
More information about JavaScript Client Object Model:
How to: Create, Update, and Delete List Items Using JavaScript
http://msdn.microsoft.com/en-us/library/office/hh185011(v=office.14).aspx
Common Programming Tasks in the JavaScript Object Model
http://msdn.microsoft.com/en-us/library/office/hh185015(v=office.14).aspx
Best regards
Patrick Liang
TechNet Community Support

How to uncheck all radio buttons in WHEN-NEW-FORM-INSTANCE trigger

Hi,
I have one radio group(RDBTNGRP) having three radio buttons (RDBTN1,RDBTN2,RDBTN3) in a control block, i want to uncheck all these three buttons through code.
Any help please.
Regards,

Hello,
I don't think you can achieve using the code or property to unselect all radio buttons.
One possibility is there to create one extra radio button in that same group and set any value for that. Let say you have two radio buttons in the radio group and now you created one more radio button in the same group. And set the value like ABC. Now go to the property of new created radio button and set the X Position, Y Position, Width and Height to zero (0). And set the initial value for that radio group to ABC (new created radio button). So at runtime it will look like unselected all radio buttons. And while saving you can check if radio button selected on your criteria or not.
-Ammad

Calculated value on ID column in list when new form is saved

Similar Messages

Maybe you are looking for