Calculating number of days without weekend and holidays

Hallo all,
can someone help me with a formular to calculate the number of days with Crystal Reports 2008 between two dates without weekends and holidays
eg.
date one = 03/24/2010
date two = 03/29/2010
Result should be 4 days as 03/27 and 03/28 will be a weekend.
Plus how to exclude holidays ?
Thank you very much
Gerald

As Doug mentioned, Holidays are very location specific, and are you talking about "corporate holidays" where the company is closed, or "public holidays" where banks (<g>) are closed?
I'd suggest setting up a calendar table (if you don't have one already), one record per date. You could make it work-days only, days-off only, or all dates with a flag to indicate if it is a work date. You could then use that to count the number of work days. By using a table, you wouldn't have to change any code to (a) extend your calendar to the following year, or (b) change holiday dates if the holidays change. (I'm thinking corporate holidays, where the company might be closed Friday 12/24/10 in observation of Christmas, but would usually only close on the 25th.)
HTH,
Carl

Similar Messages

Delivery Date should propose only working days (Excluding weekends and holidays

Hello All
I have one requirement here, where delivery dates should propose only working days and it should not allow to add weekends and holidays during the creation of sales order.
I would like to know if there are any standard settings to be done in plant or shiping point?
Kindly need all your input on this
Thanks
Naveen

Hello All
Same calendar has already been assigned in shipping point,plant and sales org and also in the calendar holidays been maintained, even though when we create a sales order it will accept weekends and holidays
Thanks

Payment term with fixed day but exclude weekends and holidays

Hello,
our customer has a requirement to have payment term that is like this:
Due date: fixed day 15th next month.
If due date falls in weekend or holiday due date will move to next business (working) day.
We have working payment term which is always the 15th on next month but it falls to weekends.
I was searching SDN found something but not working.
Could you please send me a step-by-step configuration how to exclude the weekends and holidays?
Thank you a lot.
Best regards,
Lubos

Dear Lubos,
unfortunately waht You need to have It is impossible into the SAP Standard System.
Please be aware that the vendor invoice has two relevant dates:
Baseline date   > INVFO-ZFBDT
Due on   > INVFO-NETDF
The Baseline date is managed by the "Term of payment", transaction obb8, frame
"Baseline date calculation" where You can put for example :
Fixed day            30
Additional months     3
This means that if You put as Document date 01.01.2009, the baseline date
will be 30.04.2009 (fixed day 30, additional months 3).
The "Due on" date will start ALWAYS from "the Baseline date"
(that in my example is 30.04.2009) and according to the below
"Term of payment" , the System will add
31 days, so the Due on date will be 31.05.2009.
Term      Percentage   No. of days / Fixed date Additional months
1.               %      31
2.               %
3.
You could think to use the FI substitution to reach Your goal.
Mauri

Working day formula that excludes weekends and holidays in WEBI

Hi Guys,
Can we calculate a working day formula that excludes weekends and holidays in WEBI OR in Universe?
The universe I am working on is using stored procedures, so there are no joins or modelling done. Although there is a workday stored proc that I can bring in the universe.
I am just thinking if there is no modelling or joins done in the universe how will this help me in webi?
Your suggestions will be very helpful.
Thanks,
Jitan

One more suggestion I need from you -
I have a Work_Calendar_VW that has the following columns -
Calendar_Date - 5/1/2014
Calendar_Year - 2014
Calendar_Month - 5
Calendar_Day - 1
Work_Day - 1
Day_Type - WD (Work Day) For Weekends this will be displayed as WE
The columns have all dates for current year in SQL Server.
I am going to pull this into the universe and create 2 derived tables to calculate MTD Day counts.
Derived Table 1 - Calculate Yest Work Day... this will remove all the weekends and holidays and give me the last working day. This includes couple of case statments to check each day if it's a working day or weekend.
For Work Day the above code will be 1 and for weekend 0
Derived Table 2 - This will give me the count of working days in current month using the above view and Derived table 1 Below is the code -
SELECT COUNT(*)
FROM Work_Calendar_VW
WHERE [Work_Day] = 1 AND
(Calendar_Date BETWEEN CAST(CONVERT(VARCHAR(25),MONTH(LastWoringkday()),101) + '/01/'
+ CONVERT(VARCHAR(25),YEAR(LastWoringkday()),101) AS DATE)
AND LastWoringkday()).
I cannot do joins because this universe has been built using stored proc and would like to implement this in BO universe.
let me know if this is the right approach.
Thanks,
Jitan

Time between dates excluding Weekends and Holidays

I am fairly new to Power Pivot and I am having trouble with this formula. I need my Cycle Time Days column to capture the days between CreatedDataTime and ClosedDateTime excluding Weekends and Holidays. I have a tab that has the holidays but
I can't get the formula correctly?   Jill
CreatdDateTime        ClosedDateTime     Cycle Time Days
12/1/2014                    12/10/2014

first of all you need a separate time table which holds all possible dates for your model
there should be no gaps, it should contain full years and a column of datatype DateTime as unique key
once you have this in place add a calculated column to this table as
=IF(INT(FORMAT([Date], "w")) >= 6, "Weekend", "Workday")
then go back to your original table and add the following calculation for your [Cycle Time Days]-column:
=COUNTROWS(
FILTER(
'Dates',
Dates[Date] >= DateRanges[DateFrom]
&& Dates[Date] <= DateRanges[DateTo]
&& 'Dates'[IsWeekend] = "Workday"
Holidays are a bit more tricky but you can follow the same pattern but you need to get the holidays from somewhere
hth,
-gerhard
Gerhard Brueckl
blogging @ http://blog.gbrueckl.at
working @ http://www.pmOne.com

Calculate the Difference Between two dates excluding weekends and Holidays

Hi,
We need to calculate the difference between the two dates by excluding the Local public holidays (It is global and varies across countries) and weekends should not be included in calculation for a business day in OBIEE.
We have two dates: Open date and close date when ever close date is null we are calculating age based on taking the current timestamp and need to exclude the weekends and Holidays when ever the close date is null.
Ex:
Col1 col2 Total
11/9/2010 2:46:38 PM Null 13
11/2/2010 8:06:26 PM 11/3/2010 5:37:03 PM 1
(In the Total we shouldn't include the weekends,holidays)
Please let me know how to calculate the difference between two dates by excluding the weekends and holidays.
Thanks
Edited by: user10441472 on Nov 22, 2010 3:14 PM

You already asked this question and I answered it...
Re: calculation of Business day in OBIEE

DATEADD excluding weekends and holidays

select getdate(),dateadd(day,15,Getdate())
THis gets me today and 15 days from now. However I need 15 business days. I need to exclude weekends and holidays in here so that is looks like this.
where fulldate between getdate() and dateadd(day,15,Getdate())
I have a dim table for dates and have an isholiday = 0 or 1. I just can't figure out how to include this in the DATEADD expression.

Hi,
try this link
http://www.sqlservercentral.com/Forums/Topic1247790-391-1.aspx
Hope will help you,
Questo post è fornito "così com'è". Non conferisce garanzie o diritti di alcun tipo. Ricorda di usare la funzione "segna come risposta" per i post che ti hanno aiutato a risolvere il problema e "deseleziona
come risposta" quando le risposte segnate non sono effettivamente utili. Questo è particolarmente utile per altri utenti che leggono il thread, alla ricerca di soluzioni a problemi similari. ENG: This posting is provided "AS IS"
with no warranties, and confers no rights. Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. Please Vote This As
Helpful if it helps to solve your issue. This can be beneficial to other community members reading the thread.

Add working days to a date excluding weekends and holidays

Hi there,
I need to write a function that will take a specified date and number of days to add as input parameters, and return the working day based on the number of days to add parameter, excluding weekends and any holidays held in a holiday table.
Here is my function so far -
CREATE OR REPLACE FUNCTION f_add_work_days(pd_date IN DATE
,pn_add_days IN PLS_INTEGER) RETURN DATE IS
pd_in_date DATE := pd_date;
ld_next_holiday DATE;
ln_days_left PLS_INTEGER := pn_add_days;
CURSOR cu_holiday(pn_date IN ge740.holdte%TYPE) IS
SELECT pck_utility.f_dtcnv(g.holdte)
FROM ge740 g
WHERE g.holdte >= pn_date
AND g.maint <> 'D'
ORDER BY g.holdte ASC;
BEGIN
OPEN cu_holiday(pck_utility.f_dtcnv(pd_in_date));
FETCH cu_holiday
INTO ld_next_holiday;
CLOSE cu_holiday;
LOOP
IF ln_days_left = 0 THEN
EXIT;
END IF;
pd_in_date := pd_in_date + 1;
IF pd_in_date > ld_next_holiday THEN
OPEN cu_holiday(pck_utility.f_dtcnv(pd_in_date));
FETCH cu_holiday
INTO ld_next_holiday;
CLOSE cu_holiday;
END IF;
CASE
WHEN TO_CHAR(pd_in_date
,'fmDAY') = 'SATURDAY' THEN
pd_in_date := pd_in_date + 2;
ln_days_left := ln_days_left - 1;
WHEN TO_CHAR(pd_in_date
,'fmDAY') = 'SUNDAY' THEN
pd_in_date := pd_in_date + 1;
ln_days_left := ln_days_left - 1;
WHEN pd_in_date = ld_next_holiday THEN
pd_in_date := pd_in_date + 1;
ln_days_left := ln_days_left - 1;
ELSE
ln_days_left := ln_days_left - 1;
END CASE;
END LOOP;
RETURN(pd_in_date);
END f_add_work_days;
I think there is something wrong/missing in the logic as I can't get it to cater for say a double bank holiday(25/26th Dec - if the input parameters are 24/12/2007 and 2, which should return the 28th but returns the 26th!!).
I'm relatively new to PL/SQL and Oracle, so any help, advice, ideas would be greatly appreciated!
thanks in advance

smth like
SQL> with holidays as (select to_date('10.06.2007','dd.mm.yyyy') h_dt from dual),
2       par as (select to_date('08.06.2007','dd.mm.yyyy') dt, 2 add_days from dual)
3 --
4 select min(dt) needed_date
5    from (select p.*,
6                 h.*,
7                 mod(to_char(dt, 'j'), 7),
8                 sum(decode(mod(to_char(dt, 'j'), 7), 5, 0, 6, 0, 1)+--get rid of sat and sun
9                     nvl2(h_dt, -1, 0)--check if the day is holiday
10                     ) over(order by dt) s
11            from (select dt + level dt, add_days
12                    from par
13                  connect by level <= 100) p,
14                 holidays h
15           where h_dt(+) = dt
16           order by 1)
17   where add_days = s
18 /
NEEDED_DATE
13.06.2007
SQL> ?
Message was edited by:
Volder
PS What Oracle version are you on?

Show Working days transaction on Weekends and Holidays

Hi,
I have an objective to show last working days transaction (consider Friday) on Saturday and Sunday, also
if the next day is also a Holiday then i have to post previous days transactions on Holiday too.
Example:I need to show Friday Sep 1,2006 Transactions on
Sep 2,2006
Sept 3,2006
Sep 4,2006 (Labor Day -- Holdiay)
Restriction:PL/SQL not allowed( i know it is hard to believe ..sorry)
Here is the Query that i have written which takes care of Sat and Sundays.I am having problem with Posting the data on Holidays.
-- This Query selects all working days only
select TRADE_DATE,
Case when PORT_ID = 'FFSEX5' then SUM(PRINCIPAL) End as FFSDirect,
Case when PORT_ID = 'FFSEX5' then trunc(AVG(RATE),2) End as FFSDirect_Avg,
Case when PORT_ID in ('FFSEX3', 'FFSEX2', 'CLS') then SUM(PRINCIPAL) End as FFSBroker,
Case when PORT_ID in ('FFSEX3', 'FFSEX2', 'CLS') then trunc(AVG(RATE),2) End as FFSBroker_Avg,
Case when PORT_ID in ('EPIEX3', 'ACK', 'ETCEX3', 'CKD') then SUM(PRINCIPAL) End as Euro3,
Case when PORT_ID in ('EPIEX3', 'ACK', 'ETCEX3', 'CKD') then trunc(AVG(RATE),2) End as Euro3_Avg,0 AS FLAG
FROM CV_TRADE_HIST
Group by port_id,Trade_date
Union
-- Accumulates Saturdays
select (TRADE_DATE+1) as Trade_Date,
Case when PORT_ID = 'FFSEX5' then SUM(PRINCIPAL) End as FFSDirect,
Case when PORT_ID = 'FFSEX5' then trunc(AVG(RATE),2) End as FFSDirect_Avg,
Case when PORT_ID in ('FFSEX3', 'FFSEX2', 'CLS') then SUM(PRINCIPAL) End as FFSBroker,
Case when PORT_ID in ('FFSEX3', 'FFSEX2', 'CLS') then trunc(AVG(RATE),2) End as FFSBroker_Avg,
Case when PORT_ID in ('EPIEX3', 'ACK', 'ETCEX3', 'CKD') then SUM(PRINCIPAL) End as Euro3,
Case when PORT_ID in ('EPIEX3', 'ACK', 'ETCEX3', 'CKD') then trunc(AVG(RATE),2) End as Euro3_Avg,0 AS FLAG
FROM CV_TRADE_HIST Where to_char(trade_date,'dy')='fri'
Group by port_id,Trade_date
Union
-- Accumulates Sundays
select (TRADE_DATE+2) as Trade_Date,
Case when PORT_ID = 'FFSEX5' then SUM(PRINCIPAL) End as FFSDirect,
Case when PORT_ID = 'FFSEX5' then trunc(AVG(RATE),2) End as FFSDirect_Avg,
Case when PORT_ID in ('FFSEX3', 'FFSEX2', 'CLS') then SUM(PRINCIPAL) End as FFSBroker,
Case when PORT_ID in ('FFSEX3', 'FFSEX2', 'CLS') then trunc(AVG(RATE),2) End as FFSBroker_Avg,
Case when PORT_ID in ('EPIEX3', 'ACK', 'ETCEX3', 'CKD') then SUM(PRINCIPAL) End as Euro3,
Case when PORT_ID in ('EPIEX3', 'ACK', 'ETCEX3', 'CKD') then trunc(AVG(RATE),2) End as Euro3_Avg,0 AS FLAG
FROM CV_TRADE_HIST Where to_char(trade_date,'dy')='fri'
Group by port_id,Trade_date
UNION
-- TO ADD HOLIDAYS TO THE RECORD SET
SELECT HOLI_DT AS TRADE_DATE,
0 AS FFSDirect,
0 AS FFSDirect_Avg,
0 AS FFSBroker,
0 AS FFSBroker_Avg,
0 as Euro3,
0 AS Euro3_Avg,
0 AS Euro4,
1 AS FLAG
FROM V_INTR_SRC_HOLIDAY
WHERE TO_NUMBER(TO_CHAR(HOLI_DT,'YYYY'))=2006 and TO_CHAR(HOLI_DT,'DY') NOT IN ('SAT','SUN')
ORDER BY 1 DESC
Logic i was trying (I NEED TO POST THE PREVIOUS DAYS TRANSACTIONS WHERE FLAG=1 WHICH IS A HOLIDAY.using Lag())
****My constraint is no PL/SQL and no DML is allowed.
Please let me know is there anyway i can achieve this.I tried using Lag(), it did not work for me,Any suggestions?
Thank you,
Jay Brahmanapalli
Message was edited by:
user530625

Here's a simple version:
Setup:
drop table trade_history
create table trade_history
( trade_date date not null
, amount number not null
, ticker varchar2(6) not null
declare
    tdate date;
    tamount number;
begin
    tdate := trunc(sysdate);
    for i in 1..365 loop
        tdate := tdate - 1;
        tamount := 200 - i;
        insert into trade_history (trade_date, amount, ticker)
        values (tdate, tamount, 'ORCL');
    end loop;
end;
commit
drop table holidays
create table holidays
( holiday_date date not null
, previous_business_date date not null
, holiday_name varchar2(240)
insert into holidays (holiday_date, previous_business_date, holiday_name)
values ('25-DEC-05','24-DEC-05','Christmas Day')
insert into holidays (holiday_date, previous_business_date, holiday_name)
values ('26-DEC-05','24-DEC-05','Boxing Day')
insert into holidays (holiday_date, previous_business_date, holiday_name)
values ('06-SEP-06','05-SEP-06','A midweek example')
insert into holidays (holiday_date, previous_business_date, holiday_name)
values ('04-SEP-06','01-SEP-06','A Monday example')
insert into holidays (holiday_date, previous_business_date, holiday_name)
values ('07-AUG-06','04-AUG-06','A two day post w/e example')
insert into holidays (holiday_date, previous_business_date, holiday_name)
values ('08-AUG-06','04-AUG-06','A two day post w/e example')
insert into holidays (holiday_date, previous_business_date, holiday_name)
values ('26-DEC-06','24-DEC-06','Boxing Day 2006')
commit
/And a very simple example query
select last_business_day, ticker, sum(amount), count(amount)
from (
select nvl(hol.previous_business_date, trade_date)
       - case to_char(nvl(hol.previous_business_date, trade_date),'D')
                    when '7' then 2
                    when '6' then 1
                    else 0
                    end last_business_day
     , ticker, amount
from   trade_history th
left join holidays hol on hol.holiday_date = th.trade_date
group by last_weekday, ticker
order by 1,2You should be able to build on that example, I hope. If you can't add the previous_business_date to your holiday table, then it gets slightly more complicated (because you have to skip back through consecutive holidays AND weekends AND any more consecutive holidays - ie in UK you'd have to skip back through Easter Monday, the Easter Weekend and Good Friday - last busines day is what we call Maundy Thursday.
HTH
Regards Nigel

User Exit Variable for Calculating number of days in a month

I need a query to calulate the number of days in a particular month upto the current date. For example if i give 26 Feb it should reutrn 25, if i enter 30march it should return 29 for any specific year. I have gone through some posts and understood that i need to create a formula variable (under calculated KF's) and then go to CMOD, create a project, then enancement Assignment RSAP0001 then EXIT_SAPLRSAP_001 and include a code in INCLUDE ZXRSAU01. But i have any clue of coding. Could someone give me the entire code and how to connect it to the formula variable KF in created. The technical name of the key figure is ZMDAYS. If i have made any mistakes or if there is another eaier alternative please let me know. I thankyou all for the help.

Hi Uday,
I have a few modifications in the code
Data: xdate type d,
      ip_year(4) type N,
      ip_month(2) type N.
Types : Begin of ty_month_days,
       month(2) type N,
       days(2) type N,
       End of ty_month_days.
Data : it_month_days type ty_month_days occurs 0 with header line.
ip_year = 2006.
ip_month = 01.
do 12 times.
    CONCATENATE ip_year ip_month '01' INTO xdate.
    xdate = xdate + 33.       "this date is in the next month
    xdate+6(2) = '01'.        "first day of next month
    xdate = xdate - 1.        "last day of xmonth
    it_month_days-month = xdate+4(2).       "number of days of xmonth.
    it_month_days-days = xdate+6(2).
    append it_month_days.
    ip_month = ip_month + 1.
enddo.
This code stores Month and No. of days in the internal table it_month_days.
You can access this internal table for your calculations
This should help.
Regards,
Praveen.
Message was edited by: praveen mathew

Number of Days in Date and 7pm anomaly

I have found a bizarre behavior with find the number of days for a date( since Jan. 1, 1970 ). I needed a way to calculate the number of days between two dates. I did this by using the getTime() method on the dates, then dividing them by one day in milliseconds (86400000). I then cast them to an int to trucate the decimals. This gave the number of days since Jan 1, 1970. I then subtracted the two 'number of days' values to get the number of days between the 2 dates.
This was working fine until we ran into a problem of it returning one day to many in a seemingly random pattern. The problem ended up being that after 7pm dividing a date in milliseconds form by a day in milliseconds would return one more day, than if the date was before 7pm.
example:
November 1, 2004 00:00:00 = 1099288800000ms = 12723.25 days = 12723 truncated
November 1, 2004 19:00:00 = 1099357200000ms = 12724.04 days = 12724 truncated
Why is this? Why is 12am Nov 1 not an even number of days? Supposedly the Date class starts from Jan 1, 1970 00:00:00. If everyday is 86400000ms then this behavior shouldn't happen. Does anyone know why this anomaly happens?

You need to take into account time zone. If you are at GMT+0 there is no problem (unless you switch to daylight sayings :)
For example you can take a System.currentTimeMillis() and send it anywhere in the world and it would display locally with the right time.
I guess you are at -5 hours from GMT. (Eastern time of the US/Canada timezone). The Date object makes corrections for timezone.
So in England, the time would have been 0 at Jan 1 1970, 00:00:00
Another thing you may need to worry about is daylight savings changes, which again are handled by the Date object.
The simplest thing to do is use the Date object. If this is a performance issue you can do some tricks to reduce the impact. e.g. store the default Timezone and Local locale as constants and use these to build the Date object.

ABAP HR- calculation of workind days (excluding weekend) for an employee

Hi,
I need to get number of working days between two dates excluding weekends for an employee. Please let me know below questions in this regard:
1. I have to use Factory calender or holiday calender for this purpose?
2. Will FM RKE_SELECT_FACTDAYS_FOR_PERIOD solve this purpose ?
Regards,
Aleria

Hi Aleria,
Use the FM DAY_ATTRIBUTES_GET in this FM pass the holiday and factory calendar of the employee along with the period. In the output structure if free day is set then it is SAT/SUN and if holiday is set then it is Public holiday marked in the calendar.
Regards
Bala

Exclude Weekends and Holidays while applying for leave...

Hi,
Could anyone help me out in excluding holidays while applying for leave via absence management (employee self service) in R12? While clicking on calculate duration it includes weekends as well by default. Since updating the formula BG_ABSENCE_DURATION will involve creating UDTs, modify UDF and additional effort; I tried creating workschedulle and updated the profile HR: Schedule Based Absence Calculation to 'Yes' following the metalink note 'Schedule Based Absence Calculation in Self Service' [ID 437083.1] but no luck. Is there any other additional setup that needs to be done or its better to update Fast Formula. Kindly advise on the same. Thanks in Advance!!!
Thanks,
Ahmed

Thanks much Gaurav. I was able to work it out by creating work schedule itself. I reckon I missed out selecting the schedule pattern. We need to ensure that after creating schedule the pattern needs to be selected and launched. After a while it gets effected in the system. Just in case if others are trying to implement work schedule for working days between Saturday to Wednesday following are the step involved. I have created two schedule pattern with day start as 1 and day stop as 4; and another pattern with day start as 7 and day stop as 7. It works like charm....:)
Regards,
Ahmed

How to calculate number of days excluding weekends

I have the following <u>key figures</u> in my InfoCube:
Date Released to Vendors key figure - ZRELDT
Date Awarded to a Vendor key figure - ZAWRDT
In my BEx query, I need to calculate the difference between these two key figures but the weekends should be excluded. For example, if the value of ZRELDT is 08/10/2007 (which is a Friday) and the value of ZAWRDT is 08/13/2007, the result should just be 1 day and not 3 days since the other days pertain to a Saturday and a Sunday.
How do I address this in the formula when creating the Query?
thanks.

Hi,
Use func module HOLIDAY_GET need to pass the Holiday Cal the company use
and also
FM: DATE_CONVERT_TO_FACTORYDATE.
One way to use this:
Assuming:
- You have the start & end dates in variables.
- Keep a few counters
Logic:
- Pass start date to DATE_CONVERT_TO_FACTORY_DATE with the parameter +
- If this date is not a factory date, the next date which is a factory day is returned. (I.e. passed Sunday as param, got a Monday date returned). If the day passed to the function is the same as the date returned, this is a factory day (working day)
- If the date passed to the function is not the same as the returned day then this day was not a factory day, meaning not a work date. Add 1 to a counter
- Pass the first day + 1 (use another counter for + N)
- Stop loop when passed parameter is equal to stop date.
You can replicate the factory calendar from R/3, CRM etc in your source system in RSA1 (transfer globals). In your function call, you specify which factory calendar to use
hope this help

Finding the number of days excluding weekends

Dear All,
I want to find the date difference between the working days,
ex, take 2 dates, today - Monday 11th and Monday 18th,
So, I want a function module which will calculate the difference between working days, means from 18th to 11th, it should calculate the difference as 5 working days.
Please let me know the function module which will show the number of difference in working days.
Thanks in Advance,
Ramana

Hi,
Check the following code:
REPORT ZDATEDIFF.
DATA: EDAYS   LIKE VTBBEWE-ATAGE,
      EMONTHS LIKE VTBBEWE-ATAGE,
      EYEARS LIKE VTBBEWE-ATAGE.
PARAMETERS: FROMDATE LIKE VTBBEWE-DBERVON,
            TODATE   LIKE VTBBEWE-DBERBIS DEFAULT SY-DATUM.
call function 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
exporting
    i_date_from          = FROMDATE
    i_date_to            = TODATE
I_FLG_SEPARATE       = ' '
IMPORTING
    E_DAYS               = EDAYS
    E_MONTHS             = EMONTHS
    E_YEARS              = EYEARS.
WRITE:/ 'Difference in Days   ', EDAYS.
WRITE:/ 'Difference in Months ', EMONTHS.
WRITE:/ 'Difference in Years ', EYEARS.
INITIALIZATION.
FROMDATE = SY-DATUM - 60.
Regards,
Bhaskar

Calculating number of days without weekend and holidays

Similar Messages

Maybe you are looking for