"Calculating Playback" even when effects switched off

If I assign "Full Reverb" to a track there is a slight "calculating playback" pause when I hit play. So far so good.
Why is it, though, that if I then switch off the reverb (by deselecting the green switch above the track's fader on the mixer), when I next hit play I don't get the effect - of course - however there is still a "calculating playback" pause. Is there a way of keeping the reverb in the track's effects rack ready for when I want to switch it back on, without having to have the "calculating playback" pause?

Yes it is still processed even if it is bypassed. Full reverb is about the only effect that does require a lot of pre-processing and gives that delay. If you are happy with your settings for it you can always Pre-Render the track by clicking on the Lightning box at the top right of the track effects rack. You can still go back and change things if you need but if OK it will save the processing pause when you hit Play.

Similar Messages

  • Call going to bluetooth volume even when bluetooth switched off..

    More often than not during incoming or outgoing call the call gets routed through bluetooth even though bluetooth is switched off.This results is call disruptions thereby the other party can't here what i'm saying...This is a new problem that has cropped up off late...using kitkat version...I earlier used to have a problem with proximity sensor not working, which got solved after a factory reset. I now don't have d time to conduct another reset...Help please
    P.s-Solutions other than factory reset or updation to lollipop..

    I'd give it a try with smart connect,go in settings-apps-all and clear data.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • My Iphone 4 only charges when is switched off and it's not recognized by Itunes and Mac

    Hello guys!! Please help me if someone knows what should I do. My iphone was working perfectly so far but a couple of days ago it stopped charging, its not charging neither with the a/c adapter and with the usb through my pc. It says device not recognized.. Today I had my iphone switched off and tried to see if it was charging and actually it was! But it didn't show that it was actually charging (the battery icon with the bolt didnt appear..but after 3 hours it was fully charged..but this happens only when its switched off..so i cant connect on itunes and i cant charge it while its turned on!! If someone knows please help!!!!!
    I tried different cables and different computers and nothing. I can't restore because it's no recognized...
    Thanks a lot!!

    Hi, my iphone 4 was working fine a couple of days ago, but suddenly i plugged the device to my laptop and after a while i realized it wasnt charging, i have tested on a lot of computers but i got the same issue, even on a mac but its not detected.
    So finally i turned off and after a while i realized the phone was fully charged, at least i found a temporary solution to this problem but its really anoying to switch off to charge the phoen, if you solve this problem please let us know, apple should fix this problem.
    As you can see there is no charging logo when the phone is connected

  • When display switches off I can't get it back without forced restart

    When display switches off due to low battery power & I can't get it back even when I plug in to the mains and have to force the PC to restart.
    Is there a pref somewhere to disable this?

    Hello
    When the display goes off exactly? How much capacity has battery at this time? 5%? More?
    Try to set this to higher level.
    When you work with your notebook and battery level comes to low battery level and the alarm alert will be shown in task bar but you will be able to continue your work several minutes or to connect AC power supply.
    I am afraid your notebook reaches critical battery level and then is maybe too late for any action.
    Set Low battery level to 10% and when the notification is shown connect AC adapter immediately.
    I presume the display must not be off at all.

  • Choppy playback even when rendered.

    I'm having an odd issue with the latest version of PPro CC, where even when rendered my playback at full or 1/2 resolution is incredibly choppy to the point that it's really unwatchable (the audio plays back fine though). I don't recall having this issue before the 2014 update so I may reinstall PPro, but I wanted to see if anyone else had similar issues before I went ahead and did that.
    My PC specs are an 8 core i7-3820, 64GB's of Ram, and an Nvidia GTX670. My PC should be more than able to handle this video playback even when unrendered. I mainly work on short 2-5 minute videos using 1080p footage at 23.97fps.

    I've tried enabling and disabling CUDA playback too and it doesn't seem to effect it at all.

  • How do I stop my MacBook clearing the icons off the desktop when I switch off

    How do I stop my MacBook clearing the icons off the desktop when I switch off the machine?

    Hi Matt
    After I create say a word document, file it on my desktop and then shut down my machine. The next time I open up the MacBook the file icon has been removed from the desktop. I can still retrieve the file in a folder labeled with the month I created it. But why has the OS removed it from the desktop and how can I stop it happening?
    It happens to alias icons as well!
    Regards

  • Can't get 2 exchange accounts, even when push is off?

    Is there no way to have 2 exchange accounts set up at the same time, even when push is off and I just check them manually?
    Why can't the phone simply check whichever account I choose when I open the mail app instead of limiting it to one account when there's no push involved?

    You can check email on two Exchange accounts, but you can't use ActiveSync functionality for two Exchange accounts. (There is a limit of one ActiveSync account on the device, and this is true of Windows Mobile as well.)
    At least one of the two Exchange accounts needs to be set up for IMAP or POP to do what you want and you can only check email on that IMAP or POP account (no calendar or contact sync).

  • When I switch off i5,all the pictures saved in camera roll is deleted

    When I switched off my new i5 ,all the pictures saved in camera roll is deleted.How can I fix this problem?

    Nevermind, everyone! I fixed it myself! Anyone who has or ever gets this problem, do understand that it isnt easy to fix it, but it's worth it. All you have to do is go to the photo, and tap "Edit". Then tap "Crop", and just a little bit will do the trick. Then, tap "Save". It will probably come up with a white background. Unfortunately, you must do each picture one by one. If you really want to, you can go back to any picture you've cropped, tap "Edit", then tap "Revert to Original". This will change the photo back to it's original size.

  • September 2011 MacBookAir4,2 1.7 GHz White noise even when sound turned off

    Since new this MacAir has had a white noise like a tv not tuned in even when sound is off. Gets worse as it gets warmer. Seems to be getting worse then ever.(summer). Usually connected to a Thunderbolt Display and makes noise only when display is attached. Disconnect the display and the noise goes quite after a few minutes till display is again attached.
    Mountain Lion OS X 10.8.2 (12C60)
    I think it is the Cooling Fans making the noise and the Thunderbolt connector gets hot after a few minutes.
    Rom Ver MBA41.0077.B0F
    Regards
    Barry

    Hello and Welcome to Apple Discussions.
    Try checking the hard disk for errors just in case.
    Open Disk Utility, in the Utilities folder in the Applications folder.
    Insert your Mac OS X Install disc in your computer’s optical drive or an optical drive connected to your computer, and then restart your computer. When you hear the startup tone, hold down the C key until you see the progress indicator, which looks like a spinning gear.
    Follow the onscreen instructions until the menu bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click Verify. Of Disk Utility reports errors, click Repair. When it's finished, from the Menu Bar, select Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
    Also, while you have Disk Utility open, Repair Disk Permissions, reboot and see if the sound anomaly still exists.
    Carolyn

  • The iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger

    the iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger. PLS anyone with any solution

    @wetdro
    If your device has been jailbroken during the warranty, Apple will not service it.
    Maybe you missed that in this article:
    Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
    Apple strongly cautions against installing any software that hacks iOS. It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.
    copied from Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issu…

  • Is it normal that every time when I switch off my Iphone 5s and then I turn it on again I have to insert my pin code?

    Is it normal that every time when I switch off my Iphone 5s and then I turn it on again I have to insert my pin code?

    That's what I was suspecting they were asking , but wanted to make sure.

  • When I switch off my iPhone 4S it gets switched on immidiately on its own

    When I switch off my iPhone 4S it gets switched on immidiately on its own..plzz suggest me what can I do?

    You may have a faulty power button. Take it to an Apple store for an evaluation.

  • My iphone 5 is problem facing like that. when i switch off my iphone5 then plugh for charge with data cable or charger adapder or only data cable with no power connect phone is starting why? means on my phone Why? any one can explane this matter please. s

    my iphone 5 is problem facing like that. when i switch off my iphone5 then plugh for charge with data cable or charger adapder or only data cable with no power connect phone is starting why? means on my phone Why? any one can explane this matter please. switched off my phone but on without power button . what is the problem?
    Thanks
    s.m slim

    all iphone is same like that

  • Re-Install Phone software when its switched off/ R...

    Hi
    i own a Nokia 5610 xpressmusic mobile, the problem i face is its software is totally unstable and it crashes often and the phone doesnot switch on or hangs or restarts again and again.. after swtching on. till now i run to service center to instal the software again to make it right.. But as my warranty is gonna expire soon.. Do u know any way by which i can re-install or factory reset through computer when its switched off. i tried software updater but its not able to detect the switched off phone.
    Plz suggest a solution.
    How to instal software when the mobile is not swtching on

    You can't do anything on a Series 40 phone such as the 5610 XM other than a revert to factory default settings, which probably won't solve the problem for you.
    You need to take the phone to a Nokia Care Point before the warranty expires and get them to fix the phone.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • My iPhone 6 will not show battery percentage at all and keeps vibrate on even when manually turned off and yes I have reset the phone and reset network settings and restored, update etc etc

    My iPhone 6 just went funny.  It will not show the batter percentage anymore and the alerts are coming through vibrating even when I have switched them off.  Please help! :-(

    To turn battery percentage back on: Settings>General>Usage>Battery Percentage --switch on.

Maybe you are looking for

  • How can we view the data asociated with Request ID

    Hi All, I have data loaded in an ODS there are multiple files loaded in this ODS. Now i want to view data for a perticuler request OR i want to know how can we know the data associated with a perticular request. Please help me out. Thanks & Regards A

  • How do I move or copy the contents of one tag to another ?

    No-one was able to answer my question about how I can input data into the Description tag for several tracks at once (Description not being a field listed in the Multiple Item Info window). So, thinking along different lines ... Comment IS a tag that

  • How to get photos from iCloud's

    I Had a phone 4s and it stopped working and won't come on no more. When I charge it the apple sign just keeps coming up then goes away. It does that until I let it die again. my question is i had my photos back up to Icloud and it shows my old phone

  • BP replication from CRM to R/3 (ECC)

    Hi all, I have a question regarding BP replication from CRM to R/3. In transaction PIDE I can only set up one combination of classification B (Customer) and account group, e.g. Z001 for Sold to partner. What could I do if I need to replicate a Bill-t

  • QM Usage Decision Error : Deficit Batch restricted

    I am unable to reject two batches..it shows 'no inventory exsists for this material' Usage Decision TCode gives me the following error: Deficit Batch restricted Can you please tell me, what might be the probable reason? Thanks