Calculating Standard working hours based on location/department

Hi Experts,
In Fusion HCM 8.0
Is there any way to calculate the Standard working hours based on location/department and FLSA code?
For new hires, can this be populated based on above criteria?
Please let me know how to proceed on this.
Thanks in advance.
Thanks&Regards
Prasanna Kesavan

This might be better answered on the Human Capital Management (HCM) (MOSC) forum.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Similar Messages

Calculation of working hours

Hi all,
I need a function module for the calculation of working hours. supose in the selection screen if i give 01.02.2007 to 01.10.2007 i need the calculation of working hours in that given range depending upon the personal number. Suppose if the employee is absent for 3 or 4 days within particular period of theat given range that days needs to be eliminated and should calculate for the rest of the days. Please find the below code iam finding a problem in this piece of code. Please this issue is very urgent please reply ASAP.
gv_day = sy-datum - 7.
CALL FUNCTION 'HRWPC_BL_DATES_WEEK_INTERVAL'
    EXPORTING
      datum    = gv_day
      week_pst = 0
      week_ftr = 0
    IMPORTING
      begda    = gv_begda
      endda    = gv_endda.
IF sy-subrc <> 0.
ENDIF.
*AT SELECTION-SCREEN OUTPUT.
pnpbegda = gv_begda.
pnpendda = gv_endda.
START-OF-SELECTION.
SELECT sachn
         usrid
    FROM t526 INTO TABLE git_tmadmin
   WHERE sachn NE space
     AND usrid NE space.
IF sy-subrc EQ 0.
    SORT git_tmadmin BY usrid.
ENDIF.
GET pernr.
rp-provide-from-last p0001 space pn-begda pn-endda.
IF pnp-sw-found <> 1.
    REJECT.
ELSE.
    IF p0001-kostl NOT IN s_cctr.
      REJECT.
    ELSE.
      rp-provide-from-last p0007 space pn-begda pn-endda.
      IF pnp-sw-found = 1.
        MOVE p0007-wostd TO gs_empdtls-wostd.
      ENDIF.
      MOVE : p0001-pernr TO gs_empdtls-pernr,
              p0001-kostl TO gs_empdtls-kostl,
              p0001-ename TO gs_empdtls-ename,
              p0001-sachz TO gs_empdtls-sachz.
    Employee Position from PA0001
      MOVE: p0001-plans TO gs_empdtls-plans.
      APPEND gs_empdtls TO git_empdtls.
      CLEAR gs_empdtls.
    ENDIF.
ENDIF.
Regards
Mahesh

What error are you getting?

How can i do a proper calculation of working hours?

I have tried doing a calculation of my working hours using the ABS formula but it still gives me the wrong answer.
5:00 PM
1:00 AM
16h
the formula is =ABS(A1-A2)
the resulte shoulb be 8h but it shows 16h....

giltober wrote:
Jerry,
I start working at 5pm and finish in 1am which means i worked for 8 hours.
the only way to get the correct answer is to enter the dates also?
is there a formula that i can enter that will take in consideration that every time i work i start at the afternoon and finish after midnight?
i have a cell that i enter the date..
im still new to numbers and i dont know i to put that into consideration...
thank you for your help
Gil.
That's right, my mistake on the detail. I must have been distracted. I stand by the rest of my post.
Here's my approach to solving the problem:
This will take care of the situation where you sometimes input both times on the same day even though they represent different days.
Jerry

Calculating total working hours

Hai Experts ,
i want to calculate the total working hours of every employee.
my scenario is .. i am having a table zworkinghours
the fields are
SNO -numc
EMPID-int4--- employee id
DATEE-dats--- date
WHOURS-tims--- hours worked
sample datas:
(PK)SNO       EMPID    DATEE        WHOURS
       01           101        2008/01/12    11:12:20
       02           102        2008/05/14      12:12:45
       03           103        2008/06/24      07:45:56
       04           101        2008/04/13      12:12:20
       05           102        2008/07/21      15:12:45
       06           103        2008/04/25      03:45:56
now i want to calculate the total working hours of a every employee
the output needed is
EMPID(101)     TOTAL WORKING HOURS(11:12:45 + 12:12:45)
      101                    23:25:40
plz help with the code ..
thanks and kind regards

Hi,
Slight change in your code will work. Remember that the Headerline gets cleared inside at AT....ENDAT processing Block. You need to use an explicit workarea to take care of this.
See the BOld Code with the Changes...
Data wa like line of itab.
loop at itab .
Clear wa.
Move itab to wa.at new empid.
write :/ 'Employee Id ',wa-empid.
uline.
sum.
endat.
write :/ 'date' , itab-datee,
'time worked',itab-whours.
itab-total = 0.
itab-total = itab-total + itab-whours.
Clear wa.
Move itab to wa.
at end of empid.
uline.
write : / 'total working hours ', wa-total .
skip.
endat.
ENDLOOP.
This should solve your problem
Edited by: AJAY TIWARI on Nov 9, 2008 9:02 AM

Daily working hours calculation but Half an hour flexi before start of planned time & shortfall hours calculation

Dear All,
I want to calculate daily working hours but Half an hour flexi before start of planned time & shortfall hours calculation if a person didn't completed 9 hours job.
We have different types of DWS, PWS & WSR for different PS/PSA & EG/ESG groupings.
We have a requirement for Executives/Officers (E0-E8/ S1-S2) for only one PSA (1100) for only one DWS(GFLX). In this requirement I want to calculate daily working hours but Half an hour flexi before start of planned time & shortfall hours calculation if a person didn't completed 9 hours job.
Please see the requirement and my configured DWS and PCR's in detail with example and suggest me the solution:-
Overview
I want to calculate (Please take the reference from DWS screenshot)
daily working hours, but starting from first Begin Tolerance Time
Shortfall of hours if 9 hours not completed, but again starting from first Begin Tolerance Time, although employee has come before Begin Tolerance Time
I've configured one DWS as below,
Requirement:-
The planned shift timings is 9:30 - 18:30. Employees should work and complete 9 hrs in a day, but this 9 hours should be counted only from 9:00 (i.e. Begin tolerance time). It means. In time should not consider before 9:00.
1. Suppose 1st day employee punch In time is 9:00 then he has to work up to 18:00, then only 9 hours of working will be completed & no shortfall will be calculated.
In above case, if Out time is 17:00 then shortfall will be calculated 1.0 hours, because his working hours will be counted 8 hrs only.
2. Suppose 2nd day employee punch In time is 9:45 then he has to work up to 18:45, then only 9 hours of working will be completed & no shortfall will be calculated.
In above case, if Out time is 18:00 then shortfall will be calculated 0.75 hours, because his working hours will be counted 8.25 hrs only.
3. Suppose 3rd day employee punch In time is 8:30 then he has to work up to 18:00, then only 9 hours of working will be completed & no shortfall will be calculated. (In between 9:00 - 18:00 ). Here In time is 8:30 but system should consider and count from 9:00.
In above case, if Out time is 17:30 then shortfall will be calculated 0.5 hours, although he has worked 9 hrs.
4. Suppose 4th day employee punch In time is 10:11 then he will be marked as Late Come(as per DWS) and then he has to work up to 19:11, then only no shortfall will be calculated, because he completed 9 hours.
Now the below PCR is calculating Daily Working Hours,
Now the below PCR is calculating Late Coming Hours,
Overview
I know that use of begin tolerance time is different in from my requirement. Please guide me if this DWS configuration will not work.
As of now system is able to calculate Daily Working Hours (but not from the begin tolerance time), Late coming days and Late coming hours, but shortfall is not getting calculate properly.
Please give me the idea how to write PCR for these requirement, I know that my ZDHR PCR (Daily Working Hours) needs to change or replace to fulfill this requirements.
If you want any other details please let me know.
Best Regards,
Deepak

Hi Sankarsan,
After changing the function PTIP and I used GEN in PAR2, because in PAR3 error was coming.
After the changes PCR is processing as below for three different IN time :
1. when IN time is 8:45
and in this case, ZES table No Time type is showing which is wrong because he worked from 8:45 to 18:30 it means 9:30 hours (calculation should start from 9:00 am).
2. when IN time is 9:15
and in this case, ZES table Time type 9002 is showing 9.25 hours which is correct because he worked 9.25 hours.
3. when IN time is 10:30
and in this case, ZES table Time type 9003 is showing 9.00 hours which is wrong because he worked only 8 hours.
Pls suggest.
Best Regards,
Deepak

Ignore working hours for a specific route

Dear SAP Gurus,
I'm on to maintain a route for 0 days and 0 hours. Therefore I customized a new route, and set the Delivery and Transportation Scheduling of my shipping point to "route dependent". So far, this works fine, but although I entered a total time of zero in my own - created route, the system calculates the next day as delivery date because of the customized standard working hours of our company.
Therefore I'm searching for a way to ignore those working hours in the calculation for this specific route (it's fine to use these working hours for the calculation of every other route). I'd like the delivery date and time being the same as the goods issue date and time, loading time, etc..
How to handle this one?
Thanks a lot for any suggestions / ideas.
Matthias

Hi Matthias
1)Don't maintain any factory calender , pick / pack time , material availability time etc in shipping point
2)Even don't maintain the Factory calendar in the sales orgn details
3)Don't maintain Factory calendar the shipping point data
4)Finally as you have maintained route remove the factory calendar in the your route determination .
Then your requirement can be fulfilled
Regards
Srinath

Allowance calculation based on Planned & Actual working hours

Hi,
Please advise how to calculate an allowance based on employees Planned working hours & Actual working hours for a particular work schedule rules.
Example A Employee on Work Schedule for the Whole Month Employee has a 0007 infotype record that has them on Work Schedule SC112 for the whole of April 2008. System pays 100% of the allocated payment of $166.67 per month
Example B Employee on Work Schedule for part of the Month, Employee has a 0007 infotype record that has them on Work Schedule SC112 for the part of April 2008 as they only started on 14th April 2008. Planned Hours for April for SC112 are 180 hours and this person has worked 108 hours which is 60% (=108/180). System should pay 60% of the allocated payment of $166.67 per month which results in a payment of $100.00 for the employee.
Your help would be really appreciated.
Regards
Ranjith Yama

Hi Manoj,
Suppose ABCD is the wagetype for xyz allowance. I hope you are getting this 1000 amount from T510.
This is the logic of PCR for your requirement.
ABCD
NUM=TKAU**        --> Getting Unpaid Absences (Suppose 2)
RTE=KCONS2        --> Maintain CONS2 constant in T511K Table with 200
MULTI NRA            --> Multiplying No.of Absences with 200.. that is 400
ADDWT &BUFF     --> Saving that in one Variable
FILFF NRA            --> Restoring Actual values
AMT- &BUFF        --> Subtracting from 1000 and you will get the 600
AMT?0
     ADDWT *
   <
     AMT=0             --> if amount is less than 0 then amount will bocome 0
Hope this helps.
Pradeep.

Calculating CPI and SPI based on Costs Only - No Hours

Sometimes on our projects, our vendors provide a SOW in dollars, no hours and our internal customers work on projects as needed, also only assigning a dollar value to their efforts without hours. Based on the calculations for CPI (EV/AC) and SPI (EV/PV),
you need to assign work (hours) to tasks with dates as well as the costs. I am just curious as to if anyone knows of a way for Project 2007 to calc CPI and SPI on generic resources (cost) by just updating the actual dollars spent.

Hi,
I have tried to put together some scripts that may help you. The sql script may need to be improved and be protected against errors, null values etc.
declare @AC float, @PV float, @EV float, @TPC float,@ProjectUID uniqueidentifier
Select @ProjectUID =''
select @AC=SUM(abd.AssignmentActualCost), @PV=SUM(ISNULL(abd.AssignmentBaseline0Cost,0)) from MSP_EpmAssignmentByDay_UserView abd
inner join MSP_EpmAssignment_UserView a on abd.AssignmentUID=a.AssignmentUID
inner Join msp_epmproject p on a.projectuid=p.projectuid
inner Join msp_epmresource r on a.resourceuid=r.resourceuid
where r.ResourceType in (25,26) and abd.TimeByday <= getdate() and a.Projectuid=@ProjectUID
select @TPC=SUM(ISNULL(abd.AssignmentBaseline0Cost,0)) from MSP_EpmAssignmentByDay_UserView abd
inner join MSP_EpmAssignment_UserView a on abd.AssignmentUID=a.AssignmentUID
inner Join msp_epmproject p on a.projectuid=p.projectuid
inner Join msp_epmresource r on a.resourceuid=r.resourceuid
where r.ResourceType in (25,26) and a.Projectuid=@ProjectUID
select @EV=(ProjectPercentCompleted*@TPC)/100 from MSP_epmProject_userview where ProjectUID=@ProjectUID
select @EV/@AC as CPI, @PV/@EV as CPI
Hope this helps
Paul

Creation of Work ceter based on Functional Location.

Hi all, Greetings.
I have a query regarding creation of work center in PM. i m new to this module and this is my first implementation.
The scenario is as follows.
Here there is one Plant and which i will be considering as maintenance plant as well as maintenance planning plant. i m planning to classify the technical objects based on both Functional location as well as Equipments. there are 8 functional locations and almost 10 to 20 equipments under each functional location. Can i create work center based on functional location if so i will have to create 8 work center or can i create 3 or 4 and consider 1 work center for 2 or 3 functional locations.
please help me on the same and correct me if i am wrong. i have no much knowledge on the same.
Thanks in Advance.

Hi,
Thanks Seenu,
So i have to clasify based on Maintenance activity types. If there are activities like repair, shutdown, testing etc. then i will have to create work center based on that?
So i can create some activities like, Modification, Repair, standby, waiting etc and assign work center for each?
Here we are following 4 maintenance planning preventive, predictive, breakdown & shutdown so is it possible to make 4 work center according to those.
please correct me if i m wrong. i really have no much idea in this. any help or suggestions will be appreciated.
Thanks in advance
Ramya

Daily working Hours Calculation

Dear All
Time Management - >Work Schedules->Set Work Schedule rules and work schedule
How to calculate the Daily working hours if my shift time is as given below
Night 00:25 to Morning 07:30
My break time is between 3:30 to 4:00
So my actual working hours is 6:35 hours (6 hrs and 35 min).
What i need to enter in the Daily working hours, whether 6.35 or 6.58 (0.25/15*35)?
regards
Suresh S

Hi,
First create a break shedule from 3:30 to 4:00 AM and specify if paid or unpaid.
Use this break schedule while creating daily work schedule. Specify the timings of 0:25 as start in planned working time, the end time will be calculated automatically.
Use this DWS in your PWS which you in turn use while setting WSR as you stated above. The Daily Working time will be automatically taken from DWS. And I think it should be 6:35 hrs.
cheers
Ajay

Code for employee worked hours calculation

Hello everyone,
I need some help with an ABAP code:
I have records coming in with Employee ID, Date and Worked hours along with some other fields.
I need to look up the employee id aginst another table to figure out if the employee depends to a particular state or not and the date is holiday or not from different table.
Also I would like to see if worked hours are more than 8 and put the extra hours into a differemt field for calculating if the total hours in a week exceed 40.
Can you please help with this code?
Thanks,
Raj

>
Raj Coppar wrote:
> Hello everyone,
>
> I need some help with an ABAP code:
>
> I have records coming in with Employee ID, Date and Worked hours along with some other fields.
>
> I need to look up the employee id aginst another table to figure out if the employee depends to a particular state or not and the date is holiday or not from different table--- u can use FM BKK_CHECK_HOLIDAY to find out the given date is holiday or not ? Also I would like to see if worked hours are more than 8 and put the extra hours into a differemt field for calculating if the total hours in a week exceed 40.
>
> Can you please help with this code?
>
> Thanks,
> Raj

Work Hours Calculation - ERROR

Hi All,
I'm having difficulty with the Work Hours Calculation in Project. It seems that when the number of hours within a subtask group exceeds 1000 hours, the display returns 1 hour. Whilst the Project Statistics for cost are correct, the number of hours is wrong!
Has anyone seen this error before and can help?
I would post piccy but Microsoft wont allow that yet.

Thanks for the reply Guillaume,
The Project version in question is 2007 SP3.
The issue occurs on every project that I am currently handling so it is causing me some troubles at the moment. I have even tried using the example you gave and it still does not work correctly.
Unfortunately until my account is approved I cannot post pictures however the following is the equivalent to your project above:
Project 1 67 days
Mon 15/12/14 Tue 17/03/15
1 hrs
Summary
67 days Mon 15/12/14
Tue 17/03/15 1 hrs
A 50 days
Mon 15/12/14 Fri 20/02/15
400 hrs A
B 67 days
Mon 15/12/14 Tue 17/03/15
536 hrs B
C 30 days
Mon 15/12/14 Fri 23/01/15
240 hrs C
D 10 days
Mon 15/12/14 Fri 26/12/14
80 hrs D
Many thanks,
Jon

Calculate Date/Time Difference in a Calculated Column Omitting Weekends, Holidays and Non-Working Hours

I am looking for a formula to use in a calculated column that calculates the difference between two date/time fields while excluding weekends, holidays and non-working hours
6/1/2010 9:43 AM - 6/7/2010 1:45 PM
Here is the closest that I have gotten; however, this formula gives me a result of 96:
=IF(AND((WEEKDAY([Resolved Date],2))<(WEEKDAY(Created,2)),((WEEKDAY(Created,2))-(WEEKDAY([Resolved Date],2)))>1),(((DATEDIF(Created,[Resolved Date],"D")))-(FLOOR((DATEDIF(Created,[Resolved Date],"D")+1)/7,1))-3),(((DATEDIF(Created,[Resolved Date],"D")))-(FLOOR((DATEDIF(Created,[Resolved
Date],"D")+1)/7,1)*2))*24)
Any and all assistance is greatly appreciated!

I don't know how to exclude holidays but i exclude weekends(Sat&Sun)-
IF(ISERROR(DATEDIF([Start Date],[End Date],”d”)),””,(DATEDIF([Start Date],[End Date],”d”))+1-INT(DATEDIF([Start Date],[End Date],”d”)/7)*2-IF((WEEKDAY([End Date])-WEEKDAY([Start
Date]))<0,2,0)-IF(OR(AND(WEEKDAY([End Date])=7,WEEKDAY([Start Date])=7),AND(WEEKDAY([End Date])=1,WEEKDAY([Start Date])=1)),1,0)-IF(AND(WEEKDAY([Start Date])=1,(WEEKDAY([End Date])-WEEKDAY([Start Date]))>0),1,0)-IF(AND(NOT(WEEKDAY([Start Date])=7),WEEKDAY([End
Date])=7),1,0))
-Thanks
Swapnil

Calculating working hours

Hello,
I am using the below sql query to calculate working hours. The problem which i am facing is that query is taking lot of time to calculate the working hours. Please help to reduce the execution time of this query or if there is any other way to calculate working hours
The following query take 63.499 sec
SELECT sql_calc_found_rows                                          gstime,
       MAX(stoptime)                                                AS mx,
       MIN(starttime)                                               AS mn,
       Sec_to_time(SUM(Time_to_sec(Timediff(stoptime, starttime)))) AS totalworktime
FROM   (SELECT gstime,
               gstime                                               AS stoptime,
               Coalesce((SELECT MAX(b.gstime)
                         FROM   xydata b
                         WHERE objectid = '17'
                                AND clientid = '1'
                                AND gstime > '2010-04-20 08:22:27'
                                AND gstime < '2010-04-26 10:22:27'
                                AND b.objectid = a.objectid
                                AND b.gstime < a.gstime), gstime) AS starttime
        FROM   xydata a
               INNER JOIN fm4features f
                 ON f.id = a.id
        WHERE objectid = '17'
               AND clientid = '1'
               AND gstime > '2010-04-20 08:22:27'
               AND gstime < '2010-04-26 10:22:27'
               AND f.dataid = '1'
               AND f.VALUE = '1') derived
GROUP BY Date_format(gstime, '%Y-%m-%d')
ORDER BY gstime ASCplease help me how do i change the query to reduce the sec.
Bakthavachalam E

I post explain output here
explain extended ouput
1     PRIMARY     <derived2>     ALL                         2749     100     Using temporary; Using filesort
2     DERIVED     a     range     PRIMARY,id_objid     id_objid     16          33359     100     Using where; Using index
2     DERIVED     f     ref     ID     ID     4     navl.a.ID     3     100     Using where
3     DEPENDENT SUBQUERY     b     range     id_objid     id_objid     16          33359     100     Using where; Using indexxydata and Fm4features show create table
xydata     CREATE TABLE `xydata` (
`ID` int(10) unsigned NOT NULL AUTO_INCREMENT,
`Longi` varchar(255) DEFAULT NULL,
`Lat` varchar(255) DEFAULT NULL,
`Altitude` int(11) NOT NULL,
`Angle` int(11) NOT NULL,
`Satellite` int(11) NOT NULL,
`Speed` int(11) NOT NULL,
`ObjectId` int(10) unsigned NOT NULL,
`ClientId` int(10) unsigned NOT NULL,
`GpsTime` datetime NOT NULL,
`Location` varchar(255) DEFAULT NULL,
`City` varchar(255) DEFAULT NULL,
`State` varchar(255) DEFAULT NULL,
`Distance` varchar(100) DEFAULT NULL,
`Times` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP,
PRIMARY KEY (`ID`),
KEY `id_objid` (`ObjectId`,`ClientId`,`GpsTime`) USING BTREE
) ENGINE=InnoDB AUTO_INCREMENT=70288 DEFAULT CHARSET=latin1 ROW_FORMAT=COMPRESSEDand
Fm4features show create table
fm4features     CREATE TABLE `fm4features` (
`ID` int(10) unsigned NOT NULL DEFAULT '0',
`DataId` int(11) NOT NULL,
`Value` varchar(20) NOT NULL,
KEY `ID` (`ID`),
CONSTRAINT `new_xydata_id` FOREIGN KEY (`ID`) REFERENCES `xydata` (`ID`) ON DELETE CASCADE
) ENGINE=InnoDB DEFAULT CHARSET=latin1 ROW_FORMAT=COMPRESSEDPlease any one help how to reduce the execution time.
Edited by: user13055307 on May 1, 2010 12:38 AM
Edited by: user13055307 on May 1, 2010 12:45 AM
Edited by: user13055307 on May 1, 2010 12:46 AM

Calculating worked hours

Hey guys, I'm sorry if this has been asked a million times, but I can't seem to find the exact answer by searching.
I want to use numbers '09 to calculate the hours I've worked, preferably each week. However, I'd like this list to continue over time, rather than making a new table every week, IE I can see what days I worked 3 months ago and how many hours I did.
What I want to have is a chart, in which I can insert my clock in and clock out times, and after every 7th day it will give me a total of my worked hours.
Here is a screenshot of a layout I'd like, however I'm open to better suggestions! It's all just typed in, but I'd like it to be auto complete of course.
http://img512.imageshack.us/img512/7370/screenshot20091129at230.png
Is this possible? In the future I'd like it to be able to calculate my pay aswell, maybe with a forumla to minus the 1 hour of lunch inbetween my clock in and clock out, however this could wait as I'm very new to this program.
All help is GREATLY appreciated,
Thanks, Lewis.

Hi Lewis,
The first three columns must contain data recognized by Numbers as Date and Time information.
I would skip the empty spaces in the date list. Enter the first date in A2 and use the Cell (format) Instpector to set the date format to match your example.
Then click on A2, grab the small round handle at the bottom right of the cell and drag down to fill in the rest of the dates.
The Duration column (D) could contain a simple formula:
=Clock out 'Sun, Nov 29, 2009'-Clock in 'Sun, Nov 29, 2009'
But in that form it will generate an error message in the weekly sum for any week in which you didn't work (or at least record an in and out time) on every day. To avoid that, use the formula below:
=IF(ISBLANK(Clock out 'Sun, Nov 29, 2009'),"",Clock out 'Sun, Nov 29, 2009'-Clock in 'Sun, Nov 29, 2009')
+Note: Construct the formula using the Function Browser to insert the functions. Click on the cells whose values are to be used. The labels above are those that were generated as I constructed the formulas; typing them in may not work in your table.+
Fill down column D by dragging the handle as above.
+With the data in your sample table, you will get a "-10h 0m" result in D2 as all times in this row are recorded as being on November 29, 2009. Quit before midnight. (Or adjust your start and stop times to both fall on the same day.)+
E8 (and every seventh cell in E after than) will use the
SUM function to add the times for the past seven days.
=SUM(D2:D8)
To Fill down column E, select the seven cells E2:E8, then grab and drag the handle down the column.
You should get mostly empty cells, with a number or a duration appearing in every seventh row.
Regards,
Barry

Calculating Standard working hours based on location/department

Similar Messages

Maybe you are looking for