Calculating TDS in amount splitting in MIRO

Hi experts,
In MIRO Transaction there is an amount split tab where I put the vendor retention momey Rs 9362.34/- and  in another line the rest of the amount Rs.40000/- which i have to pay to the vendor by F110 transaction code ,the total bill value is Rs 49362.34/-.The particular vendor is subjected Withholding tax (at the time of Invoice posting).
After Simulation system is calculating Withholding tax on both i.e Rs 9362.34/- and Rs.40000/-.
*Can anybody tell me is there any process that system will calculate Withholding tax on the total bill value i.e Rs 49362.34/-for one time and after payment RS.40000/- by F110 transaction code the Retention Money will be seen as Open item in Vendor ledger?*
with regards,
sudipto paul

problem was resolved

Similar Messages

  • Amount split in MIRO without tax amount

    Hi All,
    I had posted this in different thread and felt its better to open separate thread instead.
    I am facing a problem to use amount split on net amount instead on gross amount so that taxes can be paid in first installment.
    Situation is as below
    Entry is generated
    GR/IR Dr. 100
    Tax Dr. 25.50
    Vendor Cr. 101.25 (90% split on total amount)
    Vendor Cr. 11.25 (10% split on total amount)
    Items are split based on installment payment term correctly. however since tax need to be paid immediately it should split like this:
    GR/IR Dr. 100
    Tax Dr. 25.50
    Vendor Cr. 115.50 (90% split of 100 GR/IR value + 25.5 of tax )
    Vendor Cr. 10 (10% split)
    Then in OBY6 I enabled amount split. When I try to post invoice in MIRO with amount split I am getting error: Account assignment not completed for all required fields (PayT) Message no. F5A034. And in payment tab payment terms fields are hidden. I have ticked 'Enable amount split' in OBY6. and have updated amount split tab.
    Please let me know where the error is?
    Thanks,
    Pushkar

    The problem was in posting key I had maintained payment term as required entry. I changed that into optional and it is working now.
    Edited by: Pushkar Marathe on Sep 8, 2011 6:23 AM

  • Amount split in MIRO - payment method supplement

    Dear All,
    We have activated amount split functionality at the company code level and are getting an additional tab while doing MIRO. Requrirement is to get the payment method supplement field (ACSPLT-UZAWE) in the amount split screen.
    I have tried creating a variant by clicking on the yellow/blue configuration icon on top right of this dialogbox and the field is not marked invisible (infact none of the fields are invisible) yet am not able to see the PmtMthSupl in the "splitting of the final amount" window
    Can anyone help me with this. How can i get all the  visible fields on the miro screen
    Thanks & Regards
    Pooja

    hi,
    You need to enable an amount split via your company code settings so that you can post different amounts of your vendor invoice to different vendor accounts or different withholding tax accounts.
    Settings:
    SPRO >> Financial Accounting>> Financial Accounting Global Settings >>Company Code >> Enter Global Parameters
    here select your company code and on the Company Code Global Data: Details screen, select Enable amount split. and then Save...
    CHECK THE LINK IT COULD BE USEFULL:
    [AMOUNT SPLIT|http://help.sap.com/erp2005_ehp_04/helpdata/DE/2e/c5393cafb9de22e10000000a11405a/frameset.htm]
    Regards
    Priyanka.P

  • Error in MIRO for amount split

    Hi All,
    When I try to post invoice in MIRO with amount split I am getting error: Account assignment not completed for all required fields (PayT) Message no. F5A034. And in payment tab payment terms fields are missing. I have ticked 'Enable amount split' in OBY6. and have updated amount split tab.
    Pleas tell me where the problem is.
    Thanks,
    Pushkar

    Hi All,
    Thank you for support. But my problem is not getting solved. Situation is as below
    Entry is generated
    GR/IR  Dr. 100
    Tax     Dr.    25.50
    Vendor          Cr. 101.25 (90% split on total amount)
    Vendor          Cr.   11.25 (10% split on total amount)
    Items are split based on installment payment term correctly. however since tax need to be paid immediately it should split like this:
    GR/IR  Dr. 100
    Tax     Dr.    25.50
    Vendor          Cr. 115.50 (90% split of 100 GR/IR value + 25.5 of tax )
    Vendor          Cr.   10 (10% split)
    Then in OBY6 I enabled amount split. When I try to post invoice in MIRO with amount split I am getting error: Account assignment not completed for all required fields (PayT) Message no. F5A034. And in payment tab payment terms fields are missing. I have ticked 'Enable amount split' in OBY6. and have updated amount split tab.
    How to do this in system?
    Thanks,
    Pushkar
    Edited by: Pushkar Marathe on Sep 3, 2011 7:23 AM

  • MIRO - Amount Split Tab - additional field

    Hi All
    In the T-Code MIRO, under the Amount Split Tab I have entered three line items. However, I need to maintain Text for all of them separately.
    My Doubt is, can I add additional fields in the Tab for Text.
    Regards
    Abhishek Kumar
    Edited by: Abhishek Kumar on Jul 10, 2009 6:13 PM

    In that case it will become a Z t-code then right?
    Regards
    Abhishek

  • MIRO. Amount Split without Taxes Code

    Hi,
    I´m trying to make a "MIRO" "Invoice Verification"  from a Purchase Order witn only one item.
    I want to split the amount in two parts, in order to assign each part a different Tax Code.
    Somehow, I cannot see the Tax Code Field, in the "Amount Split" TAB.
    Does anybody know how can i display this field?
    Does anyboby know a different way to solve this problem?
    Thanks in advanced?

    Hi
    I really appreciate your answer.
    I tried to do what you suggested, but it is impossible in my system. I cannot leave the TAX CODE field in blank in the position. The system gives me an error "m8249" "Enter a tax code".
    I tried to find out where I could erase this message in Customizing, without success.
    Does anybody know, where i can set this field as not a mandatory field for the MIRO?
    Thanks,

  • MIRO with view "Amount splitting" enabled.

    Hi,
    how enabling the view "<b>Amount splitting</b>" in MIRO?
    Best regards

    Hi
    You need to enable an amount split via your company code settings so that you can post different amounts of your vendor invoice to different vendor accounts
    Procedure
    In Customizing for Financial Accounting, choose Financial Accounting Global Settings > Company Code > Enter Global Parameters:
    Select your company code and on the Company Code Global Data: Details screen, select Enable amount split.
    Choose Save.
    Reward if useful.
    Regards
    edwin

  • TDS mininimum amount

    Hi
    I mentioned Rs 5000 as the amt below which TDS shd not be applicable . Now suppose i receive advance payment for Rs 6000 , tds is deducted on that . Now i book a vendor invoice for Rs 10000 . Again tds is deducted on full 10,000  while on 6000 it has already been deducted once . so it is booked twice .
    if while booking vendor invoice i go to WHT data n try to manually put 4000 there on which it shd be charged then tds is not deducted at all .
    after clearing of down payment also there is no effect on tds .
    plz suggest

    HI,
    Simply here two points.
    1. TDS Minimum amount
    2. TDS calculation.
    1.  IF the tax based amount is below 5000 then tds will not calculate .
        if it is above 5000 (In your case 6000) it will calculate the tax.
       Means it is working fine.
    2. As per EWT.
       F-48   (TDS full amount)
       F-43   (TDS full amount )
       F-54   ( TDS reversal ) full amount
       F-53   ( No TDS )
      In your case please calculate the TDS full amount on Inv.
      and after do the F-54 Down payment reversal.
      then no problem for you.
    Note: while posting the Invoice please remove the payment tax code to avoid the calculation on F-53.
    I hope above will clear you issue. 
    Reg
    Madhu M
    Edited by: M Madhu on Mar 6, 2009 5:20 PM

  • ERS in Amount Split functionality

    IS it possible to enable ERS functionality in Amount Split?
    I want to pay suppose 80% of payment within 20 days and rest 20% after 100 days. And this vendor is also ERS activated.
    Please advice.

    Thanks.
    I cannot use installment payment because I am using RE document type while MIRO.
    So it is giving error 'no terms of installment payments allowed when posting net'.
    This is the reason I am trying to use Amount split, but in this procedure we will manually split amount while doing invoicing.
    But how I can divide the amount automaticall if I am using ERS?
    please advice.
    Thanks.
    Edited by: PS on Sep 22, 2009 9:27 PM

  • Calculation of partial amount

    My problem is How the total amount of the invoice can be found and partial amout...and how to calucalte it
    it is stated that enter will be there in BSEG-REBSG..but hwen i goto that table the DMBTR value is filled...
    can anyone explain below part...
    FI documents would be internally numbered. So, program to generate .txt file should provide for preventing invoices from being captured for more than the payable amount. For example, if amount credited to vendor is Euro 10,000 vide FI (and invoice verification in MM) document number 330000567. If partial amount of Euro 2000 has already been paid against this invoice, system should prevent user from entering this invoice with amount of more than Euro 8000 that is still payable.
    Program should look for (field / table) REBZG / BSEG (Number of the Invoice the Transaction Belongs to) in vendor line items (posting key 31 & 25, 50). System populates this field with invoice number against which partial amount is paid or other adjustment (debit memo amount, for example) happens. Please remember that system does not update this field when entire invoice amount is settled in the last out going payment/other adjustment document.
    Program should calculate balance amount to be paid based on:
    1. Vendor credited & expense debited vide (posting key 31,32,34 -39) for given invoice number (Document type K0,K1,KI, Number range 34,11,12)    MINUS
    2. Partial payment/ other adjustments, as per REBZG / BSEG referred above, made against the invoice number entered.
    Program should prevent entry for an amount that is more than the balance amount to be received (calculated as per points 1 and 2 above).
    It follows that if the balance calculated is full amount of the invoice (i.e. partial payments have not been received or other adjustments not done), then program should allow entry for the full invoice amount. (This will be relevant in case of MRP invoices).
    After once it validates..it will send a txt file ..with entries given...

    dear i dont know much about FI but in this case of partial payment u have to search for the document in BSID and BSAD .
    If it is the case of partial payment then BSID-BELNR doc u will find a  field BSID-REBZG in which you will find the refrence field which is havving the BSAD-BELNR location . this is how it is mapped .
    what is your ful req is not much cleared to me ,
    rgd aryan

  • Pmnt block changed when amount split use - how this funct. set?

    Hi experts,
    when i use bookmark - amount split in tcode mir7 bookmark Payment changed, a specialy pmnt block changed. I set Maintain Terms of Payment with Default value for the payment blocking key = N. But when i fill amount split payment blocking key change to released for payment. What this function logic and where this one can i set? I want that pmnt block dont change when function amount split ude.
    thnx very much for your answers
    Laco

    Hi,
    thnx for your answerd.
    Day limit was not set in T052, and items block dont use in mir7.
    Use only header pmnt block, and use amount split to in header. Payment term fill in bookmark Amount split when this use of course.
    I try this in many other customers what have SAP ECC 6.0 and tehe result is same. When i fill header invoice in mir7 in bookmark Paymant pmnt block proposed N - block workflow approval and than i go to bookmark Amount split and pliting amont and fill paymant terms and than i back to bookmark Paymant and pmnt block change - released for payment. Why?! What this governed? PO in this time dont fill.
    thanx very much.
    L.

  • Interest calculation on overdue amount payable to vendors

    hi gurus
    i have a doubt on interest calculation on overdue amount payable to vendors,can you tell me interest calculation procedure.

    hope below link are useful"
    http://www.sap-basis-abap.com/sapfj001.htm
    http://help.sap.com/bestpractices/BBLibrary/Documentation/J03_AR_BPP_05_EN_SG.doc
    pls assign points as way to say thanks

  • FV60 Vendor Invoice Amount Split Tab Field

    Greetings! Our users do not have authorization to access to FB60 - how can we open the fields (OTA and NAME OF OTA PAYEE) in the Amount Split Tab using FV60 - Park Vendor Invoice? Thank you in advance

    Hi:
            In the amount split tab of FV60 there will be a Yellow and blue button on the right corner named as configuration. Just click on it and go to Administrator and there you will see OTA and name of OTA payee . Please see if this has been set as invisible there. If they have not been set as invisible and still you can not see them in FV60 Amount split then the only way to fetch these fields in FV60 is through SHD0...For that please proceed as under
    Go to SHD0...Enter FV60  in Transaction code and ZFV60 in transaction variant.Press create button on the left top corner and enter co code and press enter again when next screen appears, it will take you to the main screen of FV60.. Enter vendor , invoice date,amount , GL account and and its amount and then keep on press entering and giving name to screen where it is required unless a FV60 main screen appears again...Now go to amount split tab and keep on pressing enter unless amount split tab screen appears, data already entered in main screen will be seen by you there , press enter two times times you will see a screen 0090 carrying these OTA fields there you will have to just un check the invisible tick from them and then exit and save with a proper name for screen variant. Give ABAP package name and exit. Upon exit in SDH0 standard variant tab assign and activate this ZFV60 variant and now you will be able to see them.
    Hope it resolves your issue.
    Regards

  • TDS Base Amount

    Hi,
    Please anybody knows how the TDS base amount field
    is diplayed in TDS report i.e. tds amount, surcharge, edcess
    and from which field it should be picked from TDS tables?
    kumar

    Dear,
    System will look for field WT_QSSHH in table WITH_ITEM.
    Regards,
    Chintan Joshi.

  • How to set propose final invoice amount indicator in MIRO document

    Hi,
    How to set propose final invoice amount indicator in MIRO document as similar to FB60 Editing options indicators.
    Regards

    Hi,
       You can not. Having such an indicator would make no sense in MIRO.
    Kind regards

Maybe you are looking for

  • Evaluation of modules and teaching staff

    Within SAP HCM Training and Event Management/Learning Solution there is an option to evaluate the courses and trainers in the learning portal. Is this functionality also available for SLcM by means of integration or does SLcM have its own functionali

  • Purchase org wise Vendor Balance

    Dear All , We have a requirement where client wants to view purchase org wise vendor balance since we have two purchase org and vendor supplies to both the purchase org do we have a report where we can see the vendor balances based on purchase organi

  • Authentication of users by Reporting Services

    I am working with a web application that has no user/password (login credentials) required. Users are able to fill out a survey and then see a pdf report of their information using Reporting Services. Programmatically,  I was unable to just hit the R

  • Trouble Creating Users Via Web Form

    I'm having trouble creating user in a 9i database via web front end. I use the following sql to create the user strSQL="CREATE USER"""+strUser+"""PROFILE ""DEFAULT"" IDENTIFIED BY ""HELLO"" DEFAULT TABLESPACE ""DATA"" TEMPORARY TABLESPACE ""TEMP"" AC

  • ME31K BADI for checking Data in Commitment Plan/ Acct assignment

    I am trying to find a BADI or User Exit to check Account Assignment / Commitment Plan Data, to work in TCodes ME31k or ME32K. I tried using ME_PROCESS_OUT_CUST , But its only for BAPI. Any Similar BADI to check in ME31K or ME32K. Appricate any help