Calculating the number of days based on transaction in Query

Hi friends,
I would be greatful if u can help me out. I have got a situtation where in i need to take the day when the transaction has occured otherwise i dont need to take that day. For example if one transaction occurs on 1st , i need to take that day and if the transaction dosent occur then i need to ignore it. If there is one transaction or multiple transactions i need to take the day only once.
Like transaction has happened on 1st Jan so it will be considered,
on 2nd the transaction dosent happen so i need to ignore it
on 3rd there is a transaction so its taken.
So its like 1st - 1
2nd - 0
3rd - 1
So total will be 2.
Transactions are being taken from a cube. Kindly let me know as to how to do this in query.
Thanks,
Kapil

PLease give us some more inputs.. requirement is not clear.
Do u have 0calday in ur Cube?
Khaja

Similar Messages

Determine the number of days in a False period in a Temporal Boolean

Hi all,
I need to determiine the number of days based on a condition that lies on the gaps between the periods.
My input consists of multiple periods. The length of the gap is the condition to determine the start date for summation. However, there can be multimple gaps between my instances that satisfy this condition and I need the last one that satisfies it.
For example:
period 1: 1-1-1990 until 31-12-1992
period 2: 1-1-1994 until 31-12-1996
period 3: 1-1-1998 until 31-12-1999
period 4: 1-6-2000 until 31-12-2009
The condition for the start date is the last gap greater than 1 year. In this example, the start date should be the start date of period 3: 1-1-1998, because this is the period after the last gap >= 1 year. Period 2 also has a previous gap of >= 1 year, but this period should NOT be selected.
My first idea was to use a TBR function: to determine relevant periods (based on the gaps before and after), calculate the amount of days per relevant period and add those up. However, if I want to do that I need to calculate the number of days in the gaps and I don't see how to do that, since I cannot determine a day difference across periods (end date period 1 until start date period 2).
Any help/ other solution ideas?
Kind regards, Els

This was an interesting puzzle which you can solve from a couple of different angles.
Firstly, you can use inferred relationships to infer a relationship "the following periods" (ie. the periods that follow the current one). My rules looked like this:
the period (the other period) is a member of the following periods if
   the other period start date > the period start date
the period’s next start date = InstanceMinimum(the following periods, the period start date)From here it should be easy to see if there was a gap of more than a year, and find the most recent period after a year-long gap. Of course you need to deal with the situation of the last period, when there is no 'next' period, presumably you would use the date of assessment in that case, but I'll leave that as an exercise for the reader.
A completely different way of doing it is to use the TemporalConsecutiveDays function to find a date where a gap of 365 days exists, then select periods in which there is a gap immediately before the start of that period. Here are some rules that :
there is a period that applies if
   ExistsScope(the periods)
      TemporalOnOrAfter(the period start date) and
      TemporalOnOrBefore(the period end date)
there is a year-long gap if
   TemporalConsecutiveDays(365, 365, there is not a period that applies)
the period starts after a year-long gap if
   ValueAt(the period start date, there is a year-long gap)
the start date for calculation = InstanceMaximumIf(the periods, the period start date, the period starts after a year-long gap)Hopefully one of these is suitable for your needs.
cheers,
Steve.

Calculating the next meeting date and the number of days until that

Hi all,
I created a meeting log page and I made a query that returns the most recent meeting date:
to_char("MFR_MEETING_LOG_MAIN"."ML_MEETING_DATE",'MM/DD/YYYY')
What I want to do is to calculate the next meeting date which is 6 month after the most recent meeting and the number of days until the next meeting.
How do I do that? THank you very much for the help in advance!

Basic SQL:
Datetime/Interval Arithmetic.
ADD_MONTHS function.
If you're new to Oracle and SQL it may be advisable at this point to complete the Database 2 Day Developer's Guide.

Calculate the number of days in a month

I need to do a calculation in my query based upon the number of days in the month. The report is broken down by cal year / month.
Is there an easy way of identifying these values in the query?
Regards.

Hi,
This can be done by writing an user exit code to determine the number of days in the month.
Sample Code :
<
CHECK i_step = 2.
READ TABLE i_t_var_range WITH KEY vnam = 'XXXX'
                           INTO loc_var_range.
IF sy-subrc EQ 0.
    beg_date(6) = loc_var_range-low(6).
    end_date(6) = loc_var_range-low(6).
    beg_date+6(2) = '01'.
    end_date+6(2) = '01'.
    ADD 1 TO end_date+4(2).
    IF end_date+4(2) = '13'.
      end_date+4(2) = '01'.
      ADD 1 TO end_date(4).
    ENDIF.
    no_days = end_date - beg_date.
    l_s_range-sign = 'I'.
    l_s_range-opt = 'EQ'.
    l_s_range-low = no_days.
    APPEND l_s_range TO e_t_range.
ENDIF.
>
Hope this helps..
Thanks & Regards,
Pradeep

Field in Material Master to specify the number of Days to keep the stock

Dear Gurus,
I want to define in Material Master, that i want to keep the Stock of the Material of 4 days as Safety stock, My consumption of Material can vary from month to month low or high. But i want to keep the number of Days fixed in Material Master for the Safety Stock. So that if my consumption varies, my Stock Quantity for Safety automatically updated.
Regards,
Johi Kapoor

Hi,
Check the TAB safety time/act. cover {Screen field MARC-SHZET, Field selection group-57} in MRP-2 screen in net requirement calculation segment.
Regards,
Biju K

Create a field routine to calculate the number of days per month

Hi Experts,
I need to create a field routine to count the number of days per month based on 0CALMONTH. Could you give me some inputs on how to do it?
Thanks!

Hi,
Create InfoObejct and then insert it in InfoSource/InfoCube/DSO then write simp,e code for that based on your 0CALMONTH values.
You just copy and pas this in SE38 and see the result and implement for your requirements.
REPORT ztest1.
Data: zsydt type sy-datum,
      zd(2) type n,
      zm(2) type n,
      zy(4) type n,
      zcmnth TYPE /bi0/oicalmonth,
      znds TYPE /osp/dt_day.
      zsydt = sy-datum.
      zd = '01'.
      zm = zsydt+4(2).
      zy = zsydt+0(4).
      CONCATENATE zy zm zd INTO zsydt.
      CALL FUNCTION '/OSP/GET_DAYS_IN_MONTH'
            EXPORTING
              iv_date = zsydt
            IMPORTING
              ev_days = znds.    "No.of days in month.
      write:/ zd.
      write:/ zm.
      write:/ zy.
      write:/ zsydt.
      write:/ znds.
Thanks
Reddy

How to calcuate the number of days

Hi Friends,
can some one help me out .. how to dispaly the number of days depending upon the from and to date selected by the user.
eg :-
there is one self service form.. in which three fields are there, they are 1) From date
2) To date
3) No of days
now my requirement is, user selects from date and to date and i need to calculate the number of days he is selected and display in No of days field. can some one help me out logic for this.
how to retrive from date and to date dynamically to my function.
apart from writing function .. can we use $FLEX$ becoz two dates are valuesets.
seeking for a solution,
thanks in advance

This doesn't sound like something that will be easy to do.
A few questions:
1) What flexfield are you referring to?
2) What Self Service page?
3) Can the 'No of days' ALWAYS be calculated? Or do you just want to default it so the user can modify it?

How to calculate the number of days until your next birthday. Only using current month, day and birth month and day.

I'm trying to calculate the number of days until your next birthday. Only using current month, day and birth month and day. I can get close but i'm way off. When i enter in the next day, the amount of days is supposed to be 364. This is where I am having problems. I know my code is way off. I just need some guidance please!
Attachments:
D5.7_1.vi ‏8 KB

I just had a little fun with the Time Record...
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
D5.7_1_BD.png ‏19 KB

How to calculate the number of days worked for a given period

I need to calculate the number of days worked by contractor employees for a time period to be entered by a user. I am building a query on an infoset which contains employee information including contract start date and contract end date for the employee.
Ideally I'd like the user to enter the time period which should be reported on e.g. 01.08.2009 to 31.08.2009
The report should then identify all the contractor employees which were working during this period and to work out how many days they worked during this period. Obviously the contract start and end dates could fall both inside and outside the reporting period.
Can this be done and if so, do you have any suggestions as to how to do it?
Thanks.

hi
So here you will first have to load the master data table employee in one internal table and read this table with the variables entries.
Your code in the reporting exit should look like that.
bye
data : wa_employee type /bi0/pemployee.
When 'ZDATE1'
if i_step = 2.
LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZDATE2'.
clear l_s_range.
clear wa_employee
1- select the entries from table employees
select single employee dateto datefrom
from /bi0/pemployee
into corresponding fields of wa_employee
where dateto le loc_var_range-low
and datefrom ge loc_var_range-high.
if sy-subrc eq 0.
CALL FUNCTION 'FIMA_DAYS_BETWEEN_TWO_DATES'
   EXPORTING
       i_datum_von = wa_employee-datefrom
       i_kz_ult_von = 'X'
       i_datum_bis = wa_employee-dateto
       i_kz_ult_bis = 'X'
       i_szbmeth    = '1'
   IMPORTING
      e_tage       = no_days.
       l_s_range-low = no_days.
       l_s_range-sign = 'I'.
       l_s_range-opt = 'EQ'.
      APPEND l_s_range TO e_t_range.
          ENDIF.
        ENDIF.
endloop.
ENDIF.
Boujema

FM to get the number of days in Year,month and days by giving number of day

Hi ALL,
This is quit differnt.
I need to give input the 'start date' and the 'number of days' and get the total days from the start date in year,month and day format.
for example.
start date :01.01.2009
number of days as 32
then i should get
years:0
months :1
days :1
Pleas help me out.

hi Anusha,
first u pass the date and the days to the following fm you will get the result date....
data:date type sy-datum,
      r_date(10) type c.
date = sy-datum.
CALL FUNCTION 'CALCULATE_DATE'
EXPORTING
   DAYS              = '32'
   MONTHS            = '0'
   START_DATE        = date
IMPORTING
   RESULT_DATE       = r_date
write:/ r_date.
then you need to pass the result date and the date to the following fm to get the required output...
CALL FUNCTION 'HR_HK_DIFF_BT_2_DATES'
    EXPORTING
      date1                   = r_date
      date2                   = date
    IMPORTING
      years                   = v_years
     months                 = v_months
    days                     = v_days
    EXCEPTIONS
      invalid_dates_specified = 1
      OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
here u will get the difference in days, months and year...
i hope u wil get help from this...
regards
Ashu Singh

How to get the number of days of a month belonging to a date interval

Hi, i am getting mad around a problem, i have 2 dates and a month, i wanto to retrieve the number of days belonging to the month that are in the interval.
eg:
month january 2011 . begin_date = 11/JAN/2011, END_DATE 30/MAY/2011 result is 21
month january 2011 . begin_date = 11/DEC/2010, END_DATE 10/JAN/2011 result 10
month january 2011 .begin_date = 02/FEB/2011 , END_DATE 25/may/2011 result 0
month january 2011. begin_date = 03/JAN/2011 , END DATE 05/JAN/2011 result 3
and so on ...
i appreciate any suggestion
thank you
Andrea

Oh, I didnt see your result.
SQL> with t as
2 (select to_date('11/01/11','dd/mm/yy') from_dt,
3           to_date('30/05/11','dd/mm/yy') to_dt,
4           'Jan-11' mnth from dual
5           union all
6           select to_date('11/12/10','dd/mm/yy') from_dt,
7           to_date('10/01/11','dd/mm/yy') to_dt,
8           'Jan-11' mnth from dual
9           union all
10           select to_date('02/02/11','dd/mm/yy') from_dt,
11           to_date('25/05/11','dd/mm/yy') to_dt,
12           'Jan-11' mnth from dual
13           union all
14           select to_date('03/01/11','dd/mm/yy') from_dt,
15           to_date('05/01/11','dd/mm/yy') to_dt,
16           'Jan-11' mnth from dual
17           )
18 select from_dt,to_dt,mnth,
19         greatest(
20              least(last_day(to_date(mnth,'Mon-yy')),to_dt)
21              -
22              greatest(to_date(mnth,'Mon-yy'),from_dt)+1
23                 ,0) cnt
24 from t;
FROM_DT   TO_DT     MNTH          CNT
11-JAN-11 30-MAY-11 Jan-11         21
11-DEC-10 10-JAN-11 Jan-11         10
02-FEB-11 25-MAY-11 Jan-11          0
03-JAN-11 05-JAN-11 Jan-11          3

How to get the number of days in a month?

hi all
is there any way to get the number of days in a given month with a given year? for instance, if year is 2004 and the month is July or February, how can i get the number of days? thanks.

Gee, I don't know ... Maybe this:
Calendar cal = Calendar.newInstance();
cal.set(Calendar.YEAR, 2004);
cal.set(Calendar.MONTH, Calendar.FEBUARY);
System.out.println("max days in month: " + cal.getActualMaximum(Calendar.DAY_OF_MONTH));
Do you not bother reading what people have already posted? Read the API docs on the Calendar class.

How to get the number of days of February.....

Hi ,
how can I get the number of days (28 or 29) of February of the current year or the next...????
Or is there any other way to find that a year is a leap or not (i mean the year has 365 or 366 days).??
Thanks
Simon

select add_months(to_date('&v_year', 'YYYY'), 12) -
to_date('&v_year', 'YYYY') from dual;Jens, it seems we have made the same mistake, trunc usage seems mandatory :
SQL> ed
Wrote file afiedt.buf
1* select add_months(to_date('2007', 'YYYY'), 12) - to_date('2007', 'YYYY') from dual
SQL> /
ADD_MONTHS(TO_DATE('2007','YYYY'),12)-TO_DATE('2007','YYYY')
366
SQL> ed
Wrote file afiedt.buf
1* select add_months(trunc(to_date('2007', 'YYYY'), 'YYYY'), 12) - trunc(to_date('2007', 'YYYY'), 'YYYY') from dual
SQL> /
ADD_MONTHS(TRUNC(TO_DATE('2007','YYYY'),'YYYY'),12)-TRUNC(TO_DATE('2007','YYYY')
365
SQL> Just to clarify my past doubt.
Nicolas.

How do you show the number of days per month?

How do you show the number of days per month?
I am working on a budget. I want to know how much to amortize each month to fund an investment. Income comes monthly, but expenses leave in days, or weeks. The number of days and weeks in months vary.
I want to figure out income and expenses per day, per month and per year, so I know how much can be invested each month, week or day. For a start I would like a formula that shows how many days are in each month?

thanks..
I solve my problem as
public class MyExample {
    public static void main(String a[]) {
        String stdate = "2009-03-01";
        java.sql.Date currentDate = new java.sql.Date(System.currentTimeMillis());
        java.sql.Date preDate = java.sql.Date.valueOf(stdate);
        System.out.println(currentDate);
        System.out.println(preDate);
//        int dateCom = preDate.compareTo(currentDate);
//        System.out.println(dateCom);
        long diff = currentDate.getTime() - preDate.getTime();
        int days = (int) Math.floor(diff / (24 * 60 * 60 * 1000));
         System.out.println(days);
}

How do you work out the number of days difference between two dates?

I'm running Crystal v12.
We use a date field in our SQL database that we use to store the client's year end date.
As the year end date (date and month) doesn't change for a client, the year end date field in all of our reports is set to just show the DD/MM part. Over the years as new clients are set up we just enter the date and month - the year part is irrelevant although as in all date fields the year is automatically entered.
Doing it this way means that we don't have to adjust the year end year part each year. We just use the DD/MM part.
I need to create a formula that works out the number of days there have been (i.e. the difference) from the current date to the year end date. It MUST EXCLUDE the year however.
For example:
Year End Date = 30/04/03
Current Date = 25/05/10
Days Difference (EXCLUDING year) = 25
Days Difference (including year) = 2582
Year End Date = 31/03/09
Current Date = 25/05/09
Days Difference (EXCLUDING year) = 55
Days Difference (including year) = 420
If you include the year part then working out day difference is simply a case of creating a formula that subtracts the year end date from the current date (CurrentDate - {tblClient.YearEnd}.
HOWEVER I need to exclude the year part.
Can anyone tell me the formula or best way to do this?
Thanks in advance.
Edited by: BadBoy House on May 25, 2010 3:15 PM
Edited by: BadBoy House on May 25, 2010 3:15 PM

Hi
You can try this
datevar e := date(year(currentdate),month({tblClient.YearEnd}),day({tblClient.YearEnd}));
numbervar num_days := datediff("d",currentdate,e)
Create a datevar called e that uses the original month and day numbers for {tblClient.YearEnd} but uses the year of the current date
Then just datediff on e to get the number of days between the two dates
I hope i understand your problem and that this helps
Best regards
Patrick

Calculating the number of days based on transaction in Query

Similar Messages

Maybe you are looking for