Calculation of IT0014
Hello,
If I change the Wage types of It0014, directly in the mid of the month, the system does not pro-rate the part2 calculation based on the changed amount for that month. But in the next month onwards it takes the changed valule.
At the same time if execute action 'Organization Re-assignment' and change the It0014..it prorates part2 amount as well.
Please suggest is this correct or I need to modify the schema for the same
Thanks in advance.
Regards,
Deepa
Hi,
Please check the rule XPPF for your scenario.
Let me know if you need more info on that.
Hope this helps,
Reward points if helpful,
Thank You,
Similar Messages
-
Prorate calculation based on Martial status
Dear Experts,
We have two types of the minimum of Housing Allowance(IT0014 - HA01WT):
1. 1000 Monthly for Single
2. 1500 Monthly for Married
And this changeable based on Marital Status Key on Info Type 0002. However; if the change of Marital Status happened in the middle of the month the Housing Allowance should be calculated on a pro rata basis.The System gives the employee the new Housing Allowance in full. Please provide me the logic or operation that we can use in the PCR
Pls let me know for any further clarification
Regards
SBI found solution on my own. please find below the rule
TABLEP0002 Read table fields
VARGBFAMST Tab.field VVVVV v.ky
1
WPALL?LAST ID = LAST?
N
Y
AMT?IZSHNG Comparison
ADDWT * OT Output table
<
RTE=FZ7N Set
RTE?1 Comparison
=
ZERO= NRA AmtNumRteTime = 0
RTE=FZ7T Set
AMT=IZMHNG Set
MULTI RAA Multipl.amt/no/rate
AMT/TKDIVI Division
ADDWT 1001 OT Output table
RTE-TKDIVI Subtraction
RTE*-1 Multiplication
AMT=0 Set
AMT=IZSHNG Set
MULTI RAA Multipl.amt/no/rate
AMT/TKDIVI Division
ADDWT 1001 OT Output table
>
AMT=IZMHNG Set
ADDWT * OT Output table
Now its calculating based on prorate basis for both single and married status...
Regards
Sanjai -
Hi
We have a requirement where the client wants only VAT to be posted in GL accounts and not the price.For this I tried free goods condition type R100 with AltCBV 28.But the VAT value is also coming zero. I want the VAT to be calculated on Pricing condition and then give 100% discount.
Apart from this I also tried to make pricing condition statistical and calculate VAT on it but then also system gives zero value for VAT.
Also wondering if the scenario can be addressed with Free of Change Dellivery.Hi
Normally in scenario where you are dealing with samples , there are cases you have to charge only TAXES / EXCISE part.
Here my SUGGESTION is you can handle this through a simple sales order process, where you have to configure a new pricing procedure.
1. Create a new document type to handle samples.
2. Create a New pricing procedure where you can keep the basic price condtion as Statistical and rest all same as wht is is there your main pricing procedure. Just juggle with the TO-FROM to capture the TAX part in the total.
3. Doc pricing procedure will help you to pick the new Pricing procedure
4. Now Process this as a normal sales order
5. This new document type will help you to have a proper reporting.
The only constraint here is USER has to punch a fresh order seperately for such scenario. He cannot give a free good in the same sales order which is used as standard.
The other way is you can configure a FREE GOOD Determination procedure as suggested where you need to then have your Single pricing procedure accomodating the same scenario.
Thanks
RB -
Hi Everyone
I used this in SP calculated column field.
=IF([Shift Sched]="1pm to 10pm","0",IF([Shift Sched]="2pm to 11pm","1",IF([Shift Sched]="3pm to 12am","2",IF([Shift Sched]="4pm to 1am","3",IF([Shift Sched]="5pm to 2am","4",IF([Shift
Sched]="6pm to 3am","5",IF([Shift Sched]="7pm to 4am","6",IF([Shift Sched]="8pm to 5am","7",IF([Shift Sched]="9pm to 6am","8",IF([Shift Sched]="10pm to 7am","8",IF([Shift
Sched]="11pm to 8am","7",IF([Shift Sched]="12pm to 9am","6",IF([Shift Sched]="1am to 10am","5",IF([Shift Sched]="2am to 11am","4",IF([Shift Sched]="3am to 12pm","3",IF([Shift
Sched]="4am to 1pm","2",IF([Shift Sched]="5am to 2pm","1",IF([Shift Sched]="6am to 3pm","0",IF([Shift Sched]="7am to 4pm","0",IF([Shift Sched]="8am to 5pm","0",IF([Shift
Sched]="9am to 6pm","0",IF([Shift Sched]="10am to 7pm","0",IF([Shift Sched]="11am to 8pm","0",IF([Shift Sched]="12pm to 9pm","0"))))))))))))))))))))))))
it was able to work fine however my issue is when i extract the information to excel and use a pivot table the table is not able to calulate the sum of the value for this field. Can you please help me with this. this is for an Attendance traker for Night
Differential pay for employees. they create a daily log of their shift schedule and if i summarize this in pivot the value in the calculated field for this is not getting the sum.
Thanks,
NormanHi Everyone
I used this in SP calculated column field.
=IF([Shift Sched]="1pm to 10pm","0",IF([Shift Sched]="2pm to 11pm","1",IF([Shift Sched]="3pm to 12am","2",IF([Shift Sched]="4pm to 1am","3",IF([Shift Sched]="5pm to 2am","4",IF([Shift
Sched]="6pm to 3am","5",IF([Shift Sched]="7pm to 4am","6",IF([Shift Sched]="8pm to 5am","7",IF([Shift Sched]="9pm to 6am","8",IF([Shift Sched]="10pm to 7am","8",IF([Shift
Sched]="11pm to 8am","7",IF([Shift Sched]="12pm to 9am","6",IF([Shift Sched]="1am to 10am","5",IF([Shift Sched]="2am to 11am","4",IF([Shift Sched]="3am to 12pm","3",IF([Shift
Sched]="4am to 1pm","2",IF([Shift Sched]="5am to 2pm","1",IF([Shift Sched]="6am to 3pm","0",IF([Shift Sched]="7am to 4pm","0",IF([Shift Sched]="8am to 5pm","0",IF([Shift
Sched]="9am to 6pm","0",IF([Shift Sched]="10am to 7pm","0",IF([Shift Sched]="11am to 8pm","0",IF([Shift Sched]="12pm to 9pm","0"))))))))))))))))))))))))
it was able to work fine however my issue is when i extract the information to excel and use a pivot table the table is not able to calulate the sum of the value for this field. Can you please help me with this. this is for an Attendance traker for Night
Differential pay for employees. they create a daily log of their shift schedule and if i summarize this in pivot the value in the calculated field for this is not getting the sum.
Thanks,
Norman -
If statement in Custom Calculation Script
I have 16 fields and if even one of them ="1" I have to list it in another field. I do not want to count or sum. If one of those fields has a 1 in it I just want the other field to display Y and if none have a 1 I want that field to display N.
Please help.
Thank you in advance~mjcYou need to write a compound logical statement to evaluate all of the values and that statement needs to evaluate to true or false.
Do you know how to write JavaScript?
Do you know how to enter JavaScript calculations into a form field?
For custom calculation of the text field I could write something like:
// define an array of the field names to check
var aNames = new Array("Text1", "Text2", "Text3", "Text4",
"Text5", "Text6", "Text7", "Text8",
"Text9", "Text10", "Text11", "Text12",
"Text13", "Text14", "Text15", "Text16");
// define a logical variable that is true if any field has a value of 1 - default is false or no field has a value of 1
var bMatch = false;
// value for text field
var TextValue = 0;
// logical value of field being equal to 1 test
var FieldIs1 = false;
// loop through all the fields and test the fields value
for(i = 0; i < aNames.length; i++) {
// logically OR the result of field i value equal to true with bMatch
// get the value of field
TextValue = this.getField( aNames[i] ).value;
// test the value of the field
FieldIs1 = Number(TextValue) == 1
// logically OR the 2 values
bMatch = FieldIs1 | bMatch;
} // end field processing
// set the field value
if(bMatch == true) {
event.value = "Y";
} else {
event.value = "N";
You will need to change the field names to match your fields. You can add more field name or remove field names as needed and the script will adjust for the number of field names. -
If statement in calculated batch characteristic (dependencies)
I have a little problem with calculating a certain batch characteristic.
The situation is the following:
I have batch char A, batch char B and batch char C. Batch char C is the result of the sommation of char A and B. The problem I have now is that batch char C only should be calculated when batch char A and B are different from 0.
I have a custom build interface that imports QM data to the batch chars. Default, all my batch chars are set to 0 so if I just say $self.charC = $self.charA + $self.charB, I always get a value.
Is it possible to some sort of IF statement to check if the value is different from 0?Dear,
You need to try with variant table
take all the combination and enter in a variant table and see the result...it works
example
A B C
0 0 space
0 1 sapce
1 1 space
I hope you got it -
Pension not calculated when EE is hired mid-month
Hi All
Please suggest for the following....
When an Employee is hired in the middle of the month, the system doesn't calculate Pension Contribution.
Like if an EE is hired on 10th April. The system will calculate all payments & deductions, but it is not calculating the Pension Contributions.
I am maintaining IT 169, 171 for Pension Contribution.
The problem I found behind this is.....(WIth the help of an ABAPer)
-: System checks the Payroll Period Start Date with the Org. Assignment start date. When it doesnu2019t match, the system does not calculate the Pension Contribution.
For the time being I solved this through the following action -: In debugging, I canceled this condition (skipped this check). Then it calculated the Pension Contribution.
But, this is not the right solution for achieving that as we are changing standard SAP coding.
Please suggest any solution for the same.
Thanks & RegardsIf your schema has p0169 with BEG that will happen, try put below Param1 which fits your requirement.
BEG
Infotype records are evaluated on the payroll period begin date.
No changes within the current payroll period are taken into
consideration.
No proration of contributions takes place, even if the record ends
within the current payroll period.
END
Infotype records are evaluated on the payroll period end date.
No changes within the current payroll period are taken into
consideration.
No proration of contributions takes place, even if the record begins
within the current payroll period.
CHK
Infotype records are evaluated on the payroll check date (the pay date),
regardless of whether the check date falls into the payroll period
itself.
A record whose validity starts after the end date of the current payroll
period is still evaluated if the check date (which lies in the future)
falls within the validity period of the infotype.
FRST
Infotype records are evaluated if there is any intersection of plan
infotype and payroll period. The first intersection is taken to
determine the full period deduction amount which is stored without
proration.
LAST
Infotype records are evaluated if there is any intersection of plan
infotype and payroll period. The last intersection is taken to determine
the full period deduction amount which is stored without proration. -
I am bringing a fixed asset system online in SAP and during the legacy conversion it was realized that the test system is not calculating the depreciation using a mid month convention. That being said looking at the configuration the company code was setup in 2005 and is in production and is productive (since 2005). So it appears that this setting is global and SAP will not allow me to change these settings to allow mid month calculations. Is this correct? anyone ran across the same issue.
Hi
please read the note 2993 and 39416!
Best Regards,
Blaz -
Mid month action_Pension (/3f4) calculation wrong
Hi All,
I get one problem , when payroll run for employee, whose action run in the mid of the month. for ex. 15.05.2010(Transfer action)
In that case the pension amount (/3f4) is calculating double or more than 541...which is wrong.
Kindly provde the input to resolve the same....
Regards,
Mahesh
Edited by: Mahesh Shewale on Sep 1, 2010 1:08 PM
Edited by: Mahesh Shewale on Sep 2, 2010 7:18 AMHi Mahesh,
Please make changes in User exit provided as per your requirement and then check the results
There are 2 user exit
EXIT_HINCALC0_002 for pension basis.
EXIT_HINCALC0_007 -
''Prepare interest on arrear calculation''
Dear Sap Gurus,
Under Prepard interest on arrears calculation there are 4 options available 1. open and all cleared items, 2.open items and items cleared with payment, 3.no open items -all cleard items, 4.no open items -only items cleared with a payment. My doubt is When and where we have to use these options. Could you explain with examples.
Thanks in advance
Thanks&Regards,
Periasamy.MUsuallu we select Open and All Cleared Items
Remaining options purely based on the client interest calculation requirements. -
Hi
I hv configured the interest calculation as shown below
1.Define interest calculation type (item interest calculation)
2.Define number ranges for interest forms(for xxxx company code)
3.Prepare Interest on Arrears Calculation(selected open and all cleared items, calender type F)
4.Define reference interest rates
5.Define Time-Based Terms
6.Enter Interest Values
7.Assign Forms for Interest Indicators
i have made postings in customer both open and cleared items for testing
but i got message"list contains no data"
do i need to make any other config.
useful answers would be rewarded with points
Regards
PrasadHi Prasad
PLease check whether Customer master records are assigned with correct "Interest Indicator" at company code data.
Best reagards,
S. Habib Pasha. -
Interest calculation on Open items and cleared items
Dear Experts
I am trying to do needful configuration for interest indicator on which interest can be calculated for open items and cleared items as well. But, system is calculating interest for open items properly, but not calculating interest on cleared items with same interest indicator, I am repeatedly getting error "interest calculation indicator is not compatible with this type of interest calculation"
Is it possible to use same interest indicator for open line items and cleared line items of customer?
If possible, request you share the needful config steps to do same.
points will be awarded for usful reply.
Best regards,
S. Habib Pasha.Hello Habib,
depending on the requests you can setup a item interest calculation or a balance interest calculation "Define calculation types".
IIC: check settings (item selection, all cleared items, only items with payment, no cleared items) "Prepare item interest calculation"
I guess you have setup the item interest calculation - maybe you have mixed some entries with BAIC.
Check in "Prepare account balance interest calculation" whether you have entries with the indicator you want to use.
At least check your entries in "Define time-based Terms" If you have entries with Balance account interest calculation the system gives even an error.
Hope this is helpfull.
Best regards
Horst -
Hi All,
When I checked table MHND, the dunning interest is calculated in such a way that it doesn't consider the previous dunned date.
Meaning :
Dunning ran on 12-01-09 interest calculated is 500.00 ( 2 docuemnst considerded from bsid as seen from table MHND )
Dunning ran on 15-01.09 interest calculated is 500.00 ( same as above)
Ideally for Dunning ran on 15-01.09 , it should not calculate interest since on 12th it is done..!!
Now queries:
1. Where can i see these interest calculated during dunning run ( any report ? ) other than table..? In std SAP, is this interest
calculated and shown only in the dunning letter ..? Does it have any other financial impact on outstanding..?
2. when I try to run the single dunn. notice, and see sample print out it gives message as
Account D 0004298846 is blocked by dunning run 20090319 MDUN1
why is it so and how to resolve..?
thanks,
Nehacan some one provide some advice on this..?
thanks,
Neha -
Opening Stock and Closing Stock Calculation
Hi,
My report requirement is to display the material, opening stock for the lower date, closing stock for the higher date and the in between all stock operations..how to fetch the opening stock and closing stock for a particular material ???.. what are the tables and fields for calculating them??..
Thanks,
Sri
Edited by: Sri on Feb 13, 2009 8:33 AMHi
We have done a similar reports. One showing opening stock/Closing stock and another one showing all the transactions for a particular day. What we did was we developed a program to fetch data from MARD table for unrestricted, blocked & Qulaity stock(Our requirement talks only about these 3 stocks). And we scheduled the program exactly at system time 00.00 hrs with A class job.(today's closing day stock is nothing but tomorrow's opening stock)
And for the second report which needs to pick all the transaction for a particular day, we picked it from MB51 entries. It is nothing but query between MKPF and MSEG.
I hope this helps. -
I have the book 'Creating Dynamic Forms with Adobe LiveCycle Designer, but none of the javascript or formcalc script is working. Can someone tell me step-by-step how to go about adding this to the existing dynamic form?
I added a small table on the existing subform, with the other 2 tables already in the form. This looked like a straight forward project. But, I have not any experience in java script other than googling for script and adding it to Adobe Acrobat fillable forms. So, I am sure I am going at this wrong.
RespectfullyHi,
can you provide the script you have tried and what exactly you want to do. What is the calculation you are trying to do?
Maybe you are looking for
-
Hello! I tried to create an ID account a few hours ago using my current email address in order to use ibooks. I completed all stages and even provided my visa card - I received a message from my bank that 'my visa was authorized for an indicative amo
-
Macbook rebooting when moved (the whole MBP or only the screen)
I brought my macbook to genius bar a week ago for this problem, they said that the hard drive failed. I bought an SSD, I reinstalled Yosemite freshly and right after..... same as before. So, this is my log, I think the crash happened at 20:40 because
-
Can a div be an editable region in a template?
This is my first attempt to work with templates. I have a main area in the center of the page where I want to be able to adjust font-size, and perhaps other text properties. I use a div called "textbox" I set it up as an editable region, but every ti
-
Remove .DS_Store files
On my iMac ios 10.10.1 I now have a Desk-Top Icon and a Finder Application file for .DS_Store. Both show in a faded text. Tried to put in the trash, but they just pop right up. They are not hurting anything that I can tell, but I want them gone. Any
-
NAC-L2-802.1x (EAP-FAST) and Cisco Secure Services Client 5.0 in wired net
Hi! (Sorry, if this is a wrong forum.) Does anybody have any success with Cisco SSC and EAP-FAST in the wired network? I'm going to use NAC, so I'm trying to set up EAP-FAST. I see the pop-up window on the client to enter user credentials and I see a