Calculation of With Holding Tax amount
Hi,
We are using the WHT which has the Minimum amount limit as 700 at the Paying document,
The issue is
there is a Paying document which clears 4 MM Invoices (Documents are coming from MIRO)
2 MM Invoice with less than 700 amount and other 2 MM Invoice with more than 700 amount,
the system is calculating the WHT for only 2 documents which are having amount less that 700 while the payment document is generated.
Can any one please suggest whether the WHT should be calculated for only 2 which have amount more than 700
OR it will get deducted for all the 4 MM as the Total of the paying document is more that 700.
Note : The Accumlation type in the WHT is No accumlation.
Looking for a positive riposte.
Thanks
Manish
It has to calculate for 2 docs more than 700 if you select no accumulation & "Minimum Check" Min base amount check at doc invoice level
Similar Messages
-
Reg: Correction of Wrong With holding tax amount Values Posted via BAPI
Hello Experts,
I have posted some invoices using BAPI_ACC_DOCUMENT_POST with With holding tax code and amount now the thing is that ..the document is posted successfully with Wrong With hoding tax amount data in TABLE WITH_ITEM due to this while executing t-code F-53 ( Outgoing payments ) its not calculating the with holding tax amount for the invoice .
Now i wan't to correct ( Negate some values) the values in WITH_ITEM table.....
How am i going to do it..!
Plz..experts help.
Plz waiting for your inputDear All,
this is not an error but the Standard System Design. Please read the note 611844. Only if You insert manually the WT amounts during the posting You will see them into the WT TAB after the posting. If You make the System to calculate the WT Aamounts automatically, no WT amounts will be reported into MIRO/MIR4. You can see them into the follow on document.
I hope this helps.
Mauri -
Calculation of with holding tax
The requirement goes like this.
We have to first remove the with holding tax data from the vendor master.
And created 1 KR(amount : 1000) & 1 RE(amount : 2000) document type.Also we posted both the above invoice documents in one Z1 clearing document.
Then add the with holding tax information in vendor master.
Then we executed the report RFWT0020 for that vendor and the document number.Its updating WITH_ITEM table with only the KR total(1000) under WT_QSSHH field.Its not considering RE total.
I debugged the program RFWT0020 and found a function module FI_WT_GET_P_WITH_ITEM which performs the with holding tax calculation.When i checked the function module,its fetching from global memory.
Is there any user exit or BADI for this.We are using 4.7 version.
Please suggest how can i update the correct with holding tax amount in WITH_ITEM table.Hi,
i´ve used this badi for MM (incoming invoices):
MRM_WT_SPLIT_UPDATE
Best regards. -
With holding tax amount exceeds the cutomer/vendor line item amount 001
Hi Guru's,
I have an issue, is there any impact to change the withholding tax base amount 20% instead of 10%.When I change the base amount to 20% and post a document system return error message
"With holding tax amount exceeds the cutomer/vendor line item amount 001".Guide me on this issue.
And tell me the impact of previous open item documents.
Regards
Maruthi.Thanks for all,
MY problem solved.
Regards
Maruthi -
With holding tax amount in vendor line lay out
Hi Experts,
I have posted an invoice in MIRO. After posting the document when I check the wittholding tax data tab in MIRO screen the w/tax base amt (WT_QSSHB & WT_QSSHH) and Wh tax amount (WT_QBSHB & WT_QBSHH) field has no value. TDS Deducted and posted. But the same fileds has values in data entry view screen when selecting the "display withholding information" in vendor account . This problem is only for MIRO entries. Because of this i am unable to bring the WHT tax amount in vendor line layout.
Kindly advise why no wtax amount was shown in the field 'w/tax column' even if the vendor is liable to tax.
With regards
RSS.Dear All,
this is not an error but the Standard System Design. Please read the note 611844. Only if You insert manually the WT amounts during the posting You will see them into the WT TAB after the posting. If You make the System to calculate the WT Aamounts automatically, no WT amounts will be reported into MIRO/MIR4. You can see them into the follow on document.
I hope this helps.
Mauri -
TDS With holding tax Amount problem.
Hi,
When we are Adding AP Invoice With holdig Tax Total Amount Effecting Only Single GL Account..i.e., TDS Payable A/C
EX:
AP Invoice we added here With Withholding Tax 4,418.70
After Clicking WTax Amount Arrow it's showing Withholing Tax Table here If we click SHOW TDS Details it will show TDS Amount and Sercharge Amount ecess Amount,Hcess Amount but after Adding Outgoing payament though on Account TDS Payable A/c through Base Documet AP it's Generating Autoamtic JE Like this
Bank Cr Amount
TDS Payable Dr Amount
here Remaining ecess Amount,Hcess Amount it's not Effecting Particular ecess G/L Account,Hcess G/L A/C. it's Effecting only TDS Payable Account with total Amount.
Please Guide me how to Solve this issue ? how we can Setup TDS we are using SAP B1 PL43 2005 B and TDS 4.8 version
Regds,
Samapth Kumar Devunuri.Read
SAP Note: 959638 Add-On TDS for Indian localization & Support Queries
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E¬e_numm=959638]
You can contact Harish or Sushanth of Citixsys at the following email Id:
harish.kumar(at)citixsys.com
sushant.mohanthy(at)citixsys.com -
DOUBT IN CIN (WITH HOLDING TAX TDS)
Payment occured first and Invoice occured afterwards. Now my question how to configure the system for calculation of with holding tax amount.
Hi Prasana,
In the TDS configuration, Define Withholding Tax Types You have to put a tick in the "Per Year, Starting with Month" accumulation type & enter the starting month.
Next in the define witholding tax code you have to put a tick in the box "wtax form" in the calculation Tab.
Next in the define formulas for calculating withholding tax you have to enter the formulas for calculating tax as follows:
To base Amount, Witholding Tax Rate etc. can be maintained.
Hope this helps.
Regards,
AVD. -
How to caculate with holding tax using vendor number
Dear All,
I need to calculate and simulate the with holding tax amount before the FI document post. input should be the vendor number fisical year and the company code and the with hoding tax base abount. plz help me to do this
regard
nawaHello,
For a record in BBSEG you can have multiple records in the data file which corresponds to Structure BWITH which allows more than one value for field WT_WITHCD. For ex:
BBKPF
Field1 Field2
a bb
x yy
BBSEG
Field1 Field2 Field3
a bb ccc
x yy zzz
BWITH
Field1 Field2 Field3 WT_WITHCD
a bb ccc WT_WITHCD1
a bb ccc WT_WITHCD2
a bb ccc WT_WITHCD3
x yy zzz WT_WITHCD7
x yy zzz WT_WITHCD8
x yy zzz WT_WITHCD9
Hope this gives you some help to proceed further.
Best Regards, Murugesh AS -
With holding tax base amount for 1099 vendors with discounted payment term
Hi Friends,
We have a below situation for 1099 vendors,
Some of the 1099 vendors are set-up in the system with payment term with discounts i.e. 2% if paid within 10 days
As per config, system posts with holding tax base amount at the time of posting payment.
With holding tax rate is 0%,
Based on modified net amount calculation
and
Cash discount calculation before w/tax calculation
When we have vendor with input tax, system excludes tax amount at the time of payment but for the with holding tax base calculation amount system does not exclude input tax type.
Which causes difference in 1099 misc vendors
Below is the example of how system calculates the amount.
Invoice $ 1000, payment term 2% if paid within 10 days. Input tax 7.25%
Payment going out=
$1000- $ 72.5(tax 7.25%) = $ 927.5 18.55 [2% discount] = $ 908.95 (payment amount)
With holding base calculation =
$ 1000 100 (2% discount) = $ 900
Difference between payment going out and with holding tax base = 908.98 900 = 8.98
Can some one please tell me how to get rid off this difference?
Moreover, please tell me if its normal to have 1099 vendors with discounted payment term.
Any thoughts on above situation will be helpful
Edited by: Shefford William on Jan 28, 2008 11:36 PMDear All
i am also having the same problem. The example is
Net invoice Value = $ 100,000
Input Tax @ 15% = $ 15,000
Total Invoice Value = $ 115,000
Cash Discount = 20% with in 20 days
On payment the system behavior should be
Debit Vendor invoice Value = $ 115,000
Debit Cash Discount @ 20% = $ 20,000 ( 20% of the Net Invoice Value that is 20% of $ 100,000)
Credit W/H Tax deduction @ 3.5% = $ 3,325 ( 3.5% of 95,000 the Inv Value - Cash Discount that is $ 115,000 - $20,000)
Credit Bank Account = $ 91,675 ( Inv value - Cash Dic - W/H tax that is $ 115,000 - 20,000 - 3325 = 91,675)
However at the time of payment system is calculating tax as follows
Debit Vendor invoice Value = $ 115,000
Debit Cash Discount @ 20% = $ 20,000 ( 20% of the Net Invoice Value that is 20% of $ 100,000)
Credit W/H Tax deduction @ 3.5% = $ 3,220 ( 3.5% of 92,000 the Inv Value - Cash Discount that is $ 115,000 - $23,000. This $ 23,000 is only calculated for W/H tax calculation that is 20% of $ 115,000 )
Credit Bank Account = $ 91,780 ( Inv value - Cash Dis - W/H tax that is $ 115,000 - 20,000 - 3220 = 91,780)
this is not the common practice when using the net base value in the system.
Can any one help me in this regard. I really have been stucked in this problem for many days
Regards
Bilal Athar -
With holding tax base amount is not showing in miro screen
Dear All
Whith holding tax amount is not showing in withholding tax tab after all posting also.
but with holding tax posting is going on fine. in miro screen in withholding tax tab i am not getting this value correctly but it is showing 0 value.
help me in this regard.
Regrds,
SamiDear Sami,
if the WT datas are zero in MIRO/MIR4 this is due to the Standard System Design. Usually You will have the correct WT data only into the FI follow on document. Only if You insert WT datas manually (wt base amount, wt amount) these will be saved into MIRO/MIR4 as well.
I hope this helps in understanding the System behaviour.
Have a nice day.
Mauri
Edited by: MAURIZIO BIANCOTTI on Oct 26, 2009 2:22 PM
Edited by: MAURIZIO BIANCOTTI on Oct 26, 2009 2:22 PM -
Re: With holding tax is not picking up while excution of RERAPP
Dear team,
While executing the RERAPP.With holding tax is not picked.We are working on 4.7 version.We had suggested a badi to pull the with holding tax field.Still system is not showing any caluculation.Plz advice us if any one of you did the immplimenttation in 4.7 and how you resolved this problem .So that it would be help ful for us too.Please do the need ful.
Regards,
Suma.Dear Sir,
What we did is all the with holding tax data include the basic amount calculations manually in excel there after given the input to the system through accounting interface. You can try with your abaper. Plz make sure that GL code length and currency .This has been done through so much work around. Technical person will guide you .If you still facing the problem where exactly your facing then i can help you out.Please be more clear what you did till now then only i can explain you with clarity.
Regards,
Suma. -
With Holding Tax provided in IDOC FIDCC2 is not getting updated in Acc Doc
Hi All,
I am Posting a Accounting document in R/3 though Idoc FIDCCP02.
This idoc has With holding Tax info segment as E1FIXWT. i gave all the info in this segment, like Tax code, Tax type , Withholding tax base amount (local currency) , Withholding tax base amount in document currency, Withholding tax amount (in local currencyand Withholding tax amount in document currency
However, when the Idoc gets posted,and the accounting document gets generated the With holding tab does not get populated in SAP.
Please let me know your inputs, that why the woth holding tab is not getting populated with the relevant info from Idoc.
Thanks in advanceHi,
I have the same issue. But as the idoc is generated in a SAP system of the same release I would have expected that the withholding tax data is already complete. Also are no withholding tax info populated in IT_ACCTX. There only VAT is visible. I suppose IT_ACCWT was meant.
Anyone any idea?
Regards
Stefanie -
India -With Holding Tax - Changes As per the Budget Approval
Dear All
Many of you are aware, there will not be any surcharge, education & higher education cess for with holding tax in Indai from 01.10.2009.
Our client is operating seperate tax codes for Basic Duty, Surcharge and Education Cess. We have change the configuration and maintained 0% in the formula for calculating with holding tax for surcharge and education cessand we have maintained with the validity from 01.10.2009
(ie., The above solution we thought because, we wish to maintain the same tax code and with out modifying the vendor master)
Now, the system is working fine for all the scenarios, except the transfer of the old advances from special gl indicator to normal line item through T.Code (F-54). Under this T-code, the system is reversing only basic duty at old rates with out surcharge and cess.
Kindly suggest the solution to reverse the surcharge and cess while doing F-54 with the posting dates as 01.10.2009 onwards
Regards
AnilkumarPlease go through the SAP note 1359268 for budget changes
also see the 1369775,1371380,1372734 for your exact requirement -
WITH HOLDING TAX ON DOWN PAYMENT
HI
I am using TCode F-47 for down payment request to be paid to vendor. In Vendor Master Record with holding tax information is activated. But at the time of processing payment against down payment request using TCode F-58 With holding tax not deducted and full down payment requested amount getting debited to vendor.
Pl suggest me
Message was edited by:
Chandrakant.K AcharyaHi Chandrakanth
u check once WHT settings at WHT type for Payment posting.here you remove inherit base option. for Cess claculating on TDS.
you check once define WHT codes for cess. here you calculate for 1% cess 0.022 % on TDS base amount or invoice amount. ex: inv: 100 , TDS 2.2 %. Cess 1% on 2.2% means 0.0220. like that you calculate.
Then you update cess tax codes in FK02,here u select liability option.
Then you can use f-47. here system showing popup with Base amount,TDS & cess codes.then you save it.
now you check with f-58. other wise you want temporly solution. go to FB02 change doc. there you can modify WHT amounts then save it.
ok all the best
Raj -
With Holding tax On Down Payment not picking
Dear All,
I have configured with holding tax on Payment posting, assigned to vendor,company code it is working fine for invoice positng and vendor payment.
When I am trying to post down payment f-48 the with holding tax codes selection screen is not pop-up or it calculates with holding tax.
Why the with holding tax selection tax is not displaying.
B.S.RaoHi,
1. Please check withholding tax type is assigned to the company code, IMG: Withholding tax>Extended withholding Tax>Company Code>Assigned Withholding Tax Types to Company Code.
Note: also check the here the proper dates u201Cw/tax obligated frmu201D and u201COblig.to w/tax untilu201D e.g. 01.01.1900 and 31.12.9999.
2. Go to OBWW also check the GL is assigned or not.
3. Also check the field status of recon. account & alternative recon account assigned for special GL for down payment, fields e.g withholding tax code and withholding tax amounts etc. should not be suppressed.
Thanks
Javed
Maybe you are looking for
-
Dynamic Text Feild with Dynamic Scroll Bar
I have a Dynamic Text Feild with a dynamic Scroll bar. It loads a simple ASCI text file with some html formating. but I still can not manage to get the text to format. The biggest problem with the format is a big space between paragraphs. I am not su
-
How can I get the SUBMIT button to function as I want it to using Acrobat X? I want to use a SUBMIT button to return the completed form to a different email address than my own. I entered a button on the form, I entered the email address correctl
-
EEM Scripting for error and drop counters
Hi, We want to check the following counters for drops every 5 minutes and generate an alarm if a certain threshold of errors (example: increment of 100 in the error/drop counters in the last 5 minutes) is overcome: My sample script is inline, i'm mis
-
ITunes 11 on iMac OS X 10.5.8
I have an iMac that is running Mac OSX 10.5.8 which is current for this iMac. I am also running iTunes version 10.6.3 which is also current fo this OS version. The issue I am having is connecting my new iPhone 5 to iTunes. iTunes tells me I must be o
-
Why is iTunes asking me to provide payment information?
About a month ago, I did have to enter a credit card number in order to purchase more storage for iCloud, but never deleted my iTunes gift card (I prefer to only use iTunes gift cards to purchase apps/music). Now, I am trying to purchase music and it