Calculation Type 'H'

Dear All,
WE have reverse pricing scenario of MRP. We have maintain set off Condition Type as below :
Condition Class - A
Calculation Type - H
Condt. Cat - D
Plus/Minus - X
i.e The Value Calculation should be (MRP 1012.50/1.125) = 900 But System is Calculating (MRP 1012.50 * 12.5 / 100)
During sales order creation the set off condition value is not getting calculated in reverse. It is calculating on the base price.
Please guide.
Regards,
Mahendra

Hi
I see something wrong in your condition type configuration
Condition class A means discount or surcharge
Condition category D means Tax
As per my knowledge i think the same combination is wrong
Calculation type H means % included which means that if a product is Rs 100 and the tax is 4% instead of Rs 104 the system will keep as 100 only but in that the tax component will be Rs 3.85 that is 100/1.04 =96.15
This you must get with Calculation type H
Pls let me know what type of calculation you are looking for with an example so that i also learn from your query
Regards
Raja
Regards
Raja

Similar Messages

Free goods calculation type

Hi all,
Could you explain for me about the SAP result for free goods like this:
I have a condition record for free goods:
Min            For            add FG                  Caltype                          Exclusive
1               10 TO          0.5 TO                     1 (proportional)
That means when customer buy 10 TO they will get 0.5 TO as free.
In SO, I keyed 13 TO and free goods showed 1 TO but as I calculate the result should be 0.65 TO, if rounding happens free goods should be 0.6 or 0.7 TO. Could you explain for me this situation?
THks a lot for your support!
Regards,
Nguyen Pham,

Hi,
We have calculation type as Prorated,Unit reference,whole units.
Example:    Free goods quantity = 100 pieces
            Additional quantity =   3 pieces
Sales orde quantity = 280 pieces
Free goods
            for proportional(Prorated)   = 8 pieces (= 280 / 100 * 3 rounded down)
            for unit-reference = 6 pieces (= 200 / 100 * 3)
             for whole unit:    = 0 pieces
                  280 is not a multiple of 100
And kindly check the UoM in Sales Order and in Free good Condition record.
with regards
Azeez.Mohd

What is the use of Alternative Calculation Type =2 and 4

Dear Friends
In pricing procedure in gross value, Net value for Item and Net value has Alternative calucation type is 2.
What is the use of it?
Without using it these value line are also fetching net value then what is the work of it. Please give me detail information with its effects in pricing condition tab page in sales document.
Thanking You
Arun

Arun biswal,
Correct Biswal. We have at varoius stages within Pricing procedure the "net value" which is calculated. Not only the alternative calculation type "2" is used if you notice carefully they are stored as subtotals at various levels.
For Ex Gross Value --> Subtotal =1 --> Calc type = 2
similarly for Net value for Item --> Subtotal =2 --> Calc type = 2
Net value 2 --> Subtotal =3 --> Calc type = 2
See, these are used to calculate the net value at various levels in pricing. The calculation Type has got a set of routines that will facilitate us in pricing. SAP has provided certain clauclated formulas or routines to facilitate us during calculation within pricing . Here the "2" is used for calculation without tax and store it as subtotal and display it or use it for further calculations.
We can use this "netvalue" amount for further calculations. It is used for clarity purpose when you issue a statement to customer. (like Confirmation order) at various levels like discount amt involved, Freight involved, Rebate amount invloved.....
Even without this Calc type or using sub total u can proceed....
Finally we have TOTAL --> Subtotal =A --> Calc type = 4
In the above line we have Calc type as 4, which means when you use TAX this calc type is used .
Routines are used to facilitate your process....
Regards
Sathya

Interest calculation type-Z-Penalty Interest Calculation

Hi all !!
I would like to know about the Interest calculation type-Z-Penalty Interest Calculation, if it is necesary to do some aditional customizing , and which are the differences between Item Interest Calculation and Penalty Interest Calculation.
Best regards and thanks all

Thanks Chandra,
Could you give us some links where we can find more info of how to configure/run this specific issue of calculate interest on interest and other aspects of penalty interest calculation.
The other point if it is possible or there is a way to depending on open items for a same vendor have a different interest indicator, I mean something like a field at the financial document in order to choose between different type of interest indicators.
Best regards and thanks

APO-DP - Change in Calculation Type of Key Figure in Production Environment

Hi Team,
I wish to know how to make a change in Calculation Type of Key Figure in Production Environment. I wish to change calculation type from "P" to "S" and also wish to enter Disaggregated Key Figure.
Regards,
Tarun Jha

HI,
The TR will not move the changes as you are expecting here.
Any changes to planning area, below 5.0 need to de-intialize the planning area.
just like
1. hold the latest back up
2. de-intialize planning area
3. make the required changes to planning area
4. initialize planning area and do conisistency checks
5. load back the data to planning area at all CVC level
all the steps need to perfom, in Dev and Quality and Production servers,
Plan the activity for a weekend so that users will not get disturb*
All the best
ARUN R Y

Unit of measure for calculation type C must be completed

Hi All
When releasing some contracts in SRM , we are getting the error message as above.
The error message doesn't specify any particular part and the contract has more than 3000 parts.
There are no conditions at header or item level.
There is no Target quantity also. Just a Target value for the contract and prices for individual items are maintained.
We are using extended classic scenario and the contract is manually created in SRM.
I have checked the OSS notes for this error, but they are mostly for contract creation in Bidding and not for a manually created SRM contract.
We checked the UOMs for all the contract parts with the UOMs ( Base and Purchasing) in ECC Material Master and they are OK.
In our scenario , MM changes in ECC are replicated to SRM in real time
Any pointers towards pin pointing the error will be rewarded!
Regards
Kedar

Hi,
We encountered this error message and resolved the problem by applying the following 3 SAP Notes:
a)     Note #1022928 - Unit of Measure for Calculation Type C Must Be Completed
        (Previously Mentioned)
b)     Note #1702484 - Unit of Measure for Calculation Type C Must Be Completed
c)     Note #1517648 - Default Conditions Added for Product Category Item Type
Although the contract required is similar to a "Limit" item, but had to be placed for bid, then the RFX PS Item Type was set to "Service" to receive the bid responses. After accepting the bid response, then we created a contract from the bid response. Since it was to be a "Limit" type contract, then we immediately removed the data from the following fields:
Remove the Quantity
Remove the Unit of Measure
Remove the Price
Remove the Price Condition
After removing the values from these fields, then we switched the PS Item Type from "Service" to "Product Category". We added the Guaranteed Minimum and account assignment data to encumber the funds. We were able to "Release" the contract successfully.
Bob Zinsmeister

IPC:The calculation type is not permitted

Hi Guy's
We are using ECC5.0, CRM4.0, IPC4.0 and ISA4.0 for the B2C implementation.
We are getting error below in CRM Order screen and not getting price also
"IPC: The calculation type is not permitted".
Scenario: The transferred sales order contains free-of-charge items. (I.e. we are given the free-of goods for particular order in item level)
I have checked the SAP Notes "389791" but, I couldn't find the solution.
Please any one help me out on this.
Thnx
Suriya

I think that's the only relevant note. If that doesn't resolve your issue, would suggest raising an oss message.
Regards,
Kaushal

I am doing pricing? How to introduce new calculation type ...

Hi,
As part of New condition type creation, I am in position to intrduce
New calculation type is "X" - Time based by hrs
New scale basis is "X" - Time based by hrs
It really very urgent, any oss note will also help.
Laxman

Hi Laxman,
Instead of Defining New Calculation type
U can Go for "Formula" (G) in the Calculation Type in the Defination of the Condition type and ask ABAP er to write the Code for u r Calculation type as a Routine and use that routine in the Pricing Procedure " Alternative Calculation Type"
and also For Scale Basis Use the Formula Based Scale( G) in the definition of the Condition type. and Again Ask ABAPer To Write the Code to ur Calculation Base and use the routine in the defination of the Condition type in the View "Scales" " Scale Formula"
This will Help you ..
Let me Know U have Any Doubts in this ..
Reward If Helpful..
Regards..
Praveen Kumar.D

Using two different calculation type for one condition in purchasing

hi
purchasing price must be callculated as the mix of fixed and quantity calculation types, example is below;
for material A whose purchasing unit of measure is quantity (piece) but base unit of measure is gr.
1.from 1 gr to 500 gr discount must be 50 usd as fixed,so 1 gr discount is the same with 499 gr discount.
2. from 501 gr up to x, 0,10 usd per gr
for example;
if quantity = 10 and total default gr from material 450, discount must be 50 usd as fixed.
but during good receipt in migo 10 piece can be 600 gr so, price must be calculated as 600*0,10 = 60 usd.
or vice versa,in purchasing order total gram can be gretaer than the gr which will be used in migo during good receipt .
if quantity = 10 and total default gr from material 600, discount must be 60 usd as scaled.
but during good receipt in migo 10 piece can be 450 gr so, price must be calculated as 50usd as fixed.
it s a little complicated.
Thanks in advance.

TW Typewriter
If the coding is not written correctly, it would definitely affect the system performance. This is not only for user exit but also will be applicable to routines. So it makes no difference.
And is not difficult to get an access key to do this development
Not in all cases. In some projects, getting an Access Key itself is very difficult and it undergoes cumbersome process from client side. So we have to take a decision on case to case basis whether to go with routine or user exit.
G. Lakshmipathi

Alternate Calculation Type?

Hi
In SAP SD-Pricing, suppose I have Alternate Calculation Types for my condition records in a procedure.
I want to know the exact flow, like I know first the requirement will be triggered and then if it is satisfied then only we can go ahead .
BUt in my case I want to know at what point of the code is Alternate Calculation Type triggered.Is there any way I can do it like putting a debug at a specific point.I did that by going in the Alt Calc Type but am still not clear about the exact flow.
Please throw some light on it.
Thanks

Hi,
The function module SD_COND_ACCESS determines the condition records..
Put a break point in the FM..
Thanks,
Naren

Condition Types : Calculation Type Change from A (percentage) to B (fixed )

Dear All,
We created a condition type (Calculation Type : A (percentage) ) and assigned access sequence and maintained in pricing procedure but later decided to change the calculation type to B (Fixed Amount) on this condition type.
I am wondering, what impact it will have ?? Can I simple change the calculation type on this condition type or should I take care of any thing else ??
Let me know, What things I have to take care of. Thanking you.
Anu.

Hi Anu,
No need of worry if it is independent condition type, means other conditions are not depending on it OR it is not depending on others.
Also check the condition records if they have any impact.
Else not a big issue, simply go ahead.

Pricing condition record, calculation type F volume, scale basis E net weig

HI SAP Gurus,
I have a question on pricing condition records.
I have a requirement that needs to populate discount based on total net weight on the PO. For example, if total net weight is greater than 1000 LB, it should give 10 cents discount per GAL. The base UOM of the material is EA, GAL is an alternative UOM and Order Pricing Unit. I can make the pricing condition works if the discount is per LB. However, it doesn't work for discount given per GAL. The calculation type is F volume and sacle basis is E net weight. Pls advise what I need to do to make it work. Thank you so much!

closed

CONDITION BASE VALUE / ALT CALCULATION TYPE Pricing

Dear All,
I have a scenario where in I want the condition base value for calculating the value for a condition type to be based on
Gross weight - Net weight value of a material.
Is it possible and if yse how do I acheive the same.
Deepak

Deepak,
Alternative Calculation Type:
Normally if you want to calculate a value you have to use a calculation type for determinating the value. This calculation type is either addition, subtraction or multiplication. Similarly SAP also has got a default calculation type in the control data of the condition type. There you have the options of either Qty based , Fixed Amount Based or Percentage based.
Here what happens is suppose if you define Your condition type that calculates the base price of a material on Qty based. Then the calculation will be done based on the quantity of the material. If the customer orders 10 Nos and you have maintained a unit price of 100 Rs for each material then the value determined is 1000 INR. Similarly if the discount condition type , you maintain the calculation type as %. This means if you maintain the value of 10 % in the condition record. Then this percentage is taken as the calculation type and the condition value is determined.
In some cases you have to forego the default calculation types and use the customer specific method for calculating a value. For ex if you are calculating the Freight charges for a Material . it depends on so many criteria like, the weight, volume and also the minimum amount etc etc, in those cases, you forego the default value and then use the alternative calculation type in calculating the condition value against the particular condition.
Alternative Condition Base value :
If you have to calculate any value then you have to have a base value for it. For ex if you want to calculate the discount of 10 % for a material then you have to have a base value on which this 10% is calculated. Normally you take the condition value of the base price of the material to calculate the value.
Now you don't want to take the base value and take other values as base value which are derived on some formulae. So you create a routine which will do the mathematical operations in the routine and derive you a value which is now used as the base value for calculating the condition value for a particular condition type.
Reward poitns if u finds this helpful....
Regds
MM

Pricing - Requirment / calculation type / base value

Dear Friends,
Thnaks for the support and guidance provided by you for my previous posts
In Pricing Procedure we give Requirment, Calculation type and Alternative formula for condition base value, I would like to know where do we exctly define all this?
Or are they standard? If standards where we can see how they works?
Regards
Vishal

Hi,
go through the below Examples for better understanding ..
Example: 1
Condition Type: PR00
Requirement 2 Item with Pricing
Purpose:
This is an example of a pricing requirement. This requirement is met if the document item category is relevant for pricing and no previous condition in the pricing procedure has set the condition exclusion flag. This requirement can be assigned to condition types in the pricing procedure to avoid unnecessary accesses to the database when an item is not relevant for pricing or a condition exclusion indicator has been set.
Example: 2
Condition Type: Net value
Calculation Type: 2 Net value
Purpose:
This is an example of a condition value formula. This type of formula can be used to influence the value shown for the condition in pricing. A condition value formula is assigned to a condition type or value line in the pricing procedure.
Formula '2' sets the value equal to net value that has been calculated so far for the item in the pricing procedure. It contains the amount excluding taxes.
Example: 3
Condition Type: R100
Alt.Condition Base Value: 28 (100% Discount)
Purpose:
This is an example of a condition base value formula. A condition base value formula can be used to influence the basis the system uses when computing a pricing value. A condition base formula is assigned to a condition type in the pricing procedure.
Formula '28' sets the rate of the condition to a 100% discount. This formula was delivered with condition type R100 to support free goods functionality.
Reward if it is useful,
Chandramohan

Manual Excise condition type with calculation type as FIXED AMOUNT

Dear Gurus,
I have used a manual excise condition (JMAN) in my pricing procedure the difference is that I've changed its calcultaion type to FIXED AMOUNT.
And in the same pricing procedure I have also got a percentage based Excise condition (ZEXC).
And in any transaction either of the one that is JMAN or ZEXC will be used.
The Manual Excise condition is used basically when the raw material sale takes place. The requirement is as such that they should be able to enter the duty value in INR and not in percentage. Please go through the example below
*(For Example I am procuring raw material of 100 kg worth 10000 at 8% of excise duty. Excise duty will be 800 for 10000rs. So it will be 8 rs per KG.
And now suppose I am utilizing 80 kg for production and want to sell remaining 20 kg. the Excise duty charged should be 160 rs. considering the rate per unit is 8rs.)*
In this case user wants to enter the value in INR and not in percentage.
And normally for the finished goods the percentage based condition is used.
Now what my issue is that how will I copy the value from JMAN to ZEXC at the raw material sale. otherwise my finished good sales is happening without any problem.
For this should I use any routine to copy the values from ZMAN to ZEXC??
Or rather is it possible that I could copy values from a condition type whose calculation type is FIXED AMOUNT to other condition whose calculation type is percentage.
How should I go ahead with this??
Please guide me.
Any answers??
Cant Do it this way??
Thanks & Regards
Anand.k
Edited by: anand k on Jul 8, 2009 6:38 AM
Edited by: anand k on Jul 8, 2009 1:04 PM

Check the condtion value in condition type UTXJ . If the JMOD value is 10% of UTXJ then assessable value should have been maintained for the Material and Plant combination in J1ID. This is due to Routine 351 maintined in pricing procedure for the condition type UTXJ
check and confirm
Senthils

Request help with different task calculation types in MSP.

How effective we can use the different calculation types provided in project management software?
- David

Hi David,
Can you please expand on your question a little, perhaps giving an example. I'm unsure as to what you mean by Calculation Type?
Ben Howard [MVP] | web |
blog |
book | P2O

Calculation Type 'H'

Similar Messages

Maybe you are looking for