Calculator doesent work on currency

When I run update currency, no currency updates shows up on the list. When I try to convert a number the list to choose currency "from -> to" is so wide I cant see the currency. The currency is there aligned middle when the list is selcted.
I have already trashed the .plist and updated the currencies. Does not help.

I am inclined to agree with Graham as I had no problems until I updated the CURRENCY CONVERSION on both my Powerbook and MiniMac. They both now suffer from this malady. I had also just uploaded the new Security Update yesterday.. so don't know if there is a conflict with that one either.
I just posted this problem on a new posting (having not found any other similar problems) and one poster (at this time) responded that in his curiosity he also just updated the CURRENCY CONVERSION and now he has the same problem... I think that tells us that it may be site related and not on our particular machines........
12 PowerBook G4 Mac OS X (10.4.8) 1.5 GHz PwrPC - 1.25 GB DDR SDRAM

Similar Messages

My "arrow" doesent work, cant "go back" one page (so I get back where I was before clicking on a "item" in FB).

When I am on FB playing f.eks CW and "click" on an "item", I get that item on "next" page - climb that one and want to go back to the place I was before - but the "arrow" doesent work anymore.
(go back a page - click right or pull down to view history).
I think this is a FIREFOX issue - so FIREFOX have to look at the problem! There is no other "users" who cant help me with this!

The Macbook Air is a low end Macintosh for graphics apps and you are asking it to perform a heavy pro workflow using a pro application. The integrated GPU of MBAs is a serious limiter to heavy graphics. Personally I would expect flaky performance with certain operations. In general I recommend that Aperture users choose boxes with independent GPUs and capable of taking 16 GB RAM if necessary.
It will be important to carefully optimize workflow. How much RAM is in the MBA? The most Apple specs is 8 GB but you can check OWC to see if you can go to 16 GB. My Aperture/Photoshop workflow paged out at 8 GB RAM before I upgraded to 16 GB RAM.
You should evaluate whether or not you have adequate RAM:
Look at the Page Outs number under System Memory on the Activity Monitor app before starting a typical Aperture/Photoshop work session and write the number down. Recheck the Page Outs count after working for a few hours and write the number down again. If the page outs change (manual calculation of ending page outs number minus starting page outs number) is not zero your workflow is RAM-starved.
Ignore the pie charts and other info in Activity Monitor because they can be misleading regarding RAM usage. For RAM analysis, manually count page outs before and after a work session.
HTH
-Allen

Account calculation vs. Entity currency total

Hi all,
I'm trying to solve one issue regarding an account calculation...
This calculation is simple one and calculates the ratio between several accounts. Let's say C = A / B.
I want this calculation to be run not only for <Entity currency>, but also for <Entity currency adjustments> and <Entity currency total>. For <Entity currency> and <Entity currency adjustments> it's working correctly and it calculates the ratio. But for <Entity currency total> it simply sums <Entity currency> and <Entity currency adjustments> which is not good.
How to force HFM to use the calculation also for <Entity currency total> and override the default setting which just sums <Entity currency> and <Entity currency adjustments>?
BR
Vladino

Hi,
I have tried this but this is not working... See the printscreen: http://i52.tinypic.com/2hq8kdw.jpg
Here is the rule:
Sub Calculate()
HS.EXP "A#c = A#a / A#b"
End Sub
Accounts "a" and "b" are set to revenue type, account "c" is balance type.
Any other idea?
Vladino

Share calculation Not working in the report

Iam surprised not to ge the simple share calculation not working at my report.
I have a dimension and corresponding values ( measures) .I made a Total at the end of the report. and I want to calcualte share of Total to each corresponding value.
how to do this, any thougts,...
I have used calculated memebers for this, But I wan to make the percentage of the total ( which is calculated inside Tool itself)
Please help....

Prassad,
Not totally sure what you are trying to achieve but there a couple of possible solutions:
1) Total = total of all dimension members. Assuming you only have three dimension members then you should have a fourth member called ALL_DIMS or something similar. In the Share calculation template you need to specify the Total level as the basis for your share calc. This will generate the following result:
                         Revenue % Share
- All Members     600         100%
     A                  100           17%
     B                  200           33%
     C                  300           50%2) The total you are referring to is in fact a sub total and is the result of adding together only the results for A + B + C, i.e. you have hundreds of dimension members but you specifically want to see a total for just these three members. To do this create a new custom aggregate call "My Total" and add together the dimension members A + B + C - Custom Aggs are a new feature to Discoverer OLAP (Checkout Mark Rittman's excellent blog article for more information on this feature: http://www.rittmanmead.com/2006/11/13/checking-out-the-new-discoverer-101220-features/)
Then in the Share calculation wizard set the basis for your index using the last option in the list "Specific Dimension Member" and select your new custom aggregate member.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

Calculation of working hours

Hi all,
I need a function module for the calculation of working hours. supose in the selection screen if i give 01.02.2007 to 01.10.2007 i need the calculation of working hours in that given range depending upon the personal number. Suppose if the employee is absent for 3 or 4 days within particular period of theat given range that days needs to be eliminated and should calculate for the rest of the days. Please find the below code iam finding a problem in this piece of code. Please this issue is very urgent please reply ASAP.
gv_day = sy-datum - 7.
CALL FUNCTION 'HRWPC_BL_DATES_WEEK_INTERVAL'
    EXPORTING
      datum    = gv_day
      week_pst = 0
      week_ftr = 0
    IMPORTING
      begda    = gv_begda
      endda    = gv_endda.
IF sy-subrc <> 0.
ENDIF.
*AT SELECTION-SCREEN OUTPUT.
pnpbegda = gv_begda.
pnpendda = gv_endda.
START-OF-SELECTION.
SELECT sachn
         usrid
    FROM t526 INTO TABLE git_tmadmin
   WHERE sachn NE space
     AND usrid NE space.
IF sy-subrc EQ 0.
    SORT git_tmadmin BY usrid.
ENDIF.
GET pernr.
rp-provide-from-last p0001 space pn-begda pn-endda.
IF pnp-sw-found <> 1.
    REJECT.
ELSE.
    IF p0001-kostl NOT IN s_cctr.
      REJECT.
    ELSE.
      rp-provide-from-last p0007 space pn-begda pn-endda.
      IF pnp-sw-found = 1.
        MOVE p0007-wostd TO gs_empdtls-wostd.
      ENDIF.
      MOVE : p0001-pernr TO gs_empdtls-pernr,
              p0001-kostl TO gs_empdtls-kostl,
              p0001-ename TO gs_empdtls-ename,
              p0001-sachz TO gs_empdtls-sachz.
    Employee Position from PA0001
      MOVE: p0001-plans TO gs_empdtls-plans.
      APPEND gs_empdtls TO git_empdtls.
      CLEAR gs_empdtls.
    ENDIF.
ENDIF.
Regards
Mahesh

What error are you getting?

After System restore from Time Capsule Mail doesent work

HI
i resored my Time capsule backup on my mac because of the need for space to install windows on my mac (Boot camp doesent works!) i can use all my programms and data well exept Mail when i start mail it Flashes:
You can’t use this version of Mail with this version of Mac OS X
You have Mail version 4.0 (1075/1076). It can’t be used on Mac OS X Version 10.6.1 (Build 10B504). For more information, click the Help button.
(help button is online help....)
But its just a 1to1 backup.....
Can anyone help me??

Blinkyrus wrote:
i restored my Time capsule backup on my mac because of the need for space to install windows on my mac (Boot camp doesent works!) i can use all my programms and data well exept Mail when i start mail it Flashes:
You can’t use this version of Mail with this version of Mac OS X
You have Mail version 4.0 (1075/1076). It can’t be used on Mac OS X Version 10.6.1 (Build 10B504). For more information, click the Help button.
(help button is online help....)
The first thing I'd try is to download and install the Mac OS X 10.6.1 updater:
http://support.apple.com/kb/DL930
It would have been more appropriate to post your message in one of the Mac OS X 10.6 message sections.

Calculations not working in Reader Enabled PDF Form

I created a basic Excel spreadsheet and imported it into Acrobat 11 to make a fillable form. Acrobat inserted most of the fields but I had to add some to complete the form. I went into the properties of the fields and set up the calculations using the standard Acrobat calculations. I want the product of field1, field2. When I preview the form, the calculations work. I then close the form for editing and save as reader extended PDF with more tools. When I open the pdf in reader the calculations do not work. I then researched many possibilities on the forums and even called adobe twice with no resolution. I was able to import a blank excel spreadsheet, then created three new fields with calculations and they worked in reader when I saved the form as a reader extended pdf with more tools. So my question is where does my problem originate? Is the problem with the excel spreadsheet or excel formatting ( Excel 2013)? Is the problem with Acrobat 11? When I asked the support tech at Adobe he said that he hasn't heard of this problem before. I have spent hours and hours on this, I have created new forms from scratch and even on different versions of word and acrobat. I figured these calculations should work, am I wrong? ( I have also tried using every calculation option including JavaScript). Thanks in advance for any help.

It's hard to say without seeing a sample. If you can post one somewhere, I'd be happy to test it out. If you can't post somewhere, you can email me at: acroscript at gmail dot com

Calculations not working

Hi All,
getting frustrated. I've done forms with calculations (invoice sheets etc.) and they worked well in the past. I can't seem to get the calculations to function in my latest form when they're used by the end used in Reader (8 or 9). Works well in Acrobat though. Is there something I can do to fix this? I've tried replacing the form boxes in question and redoing the sum and or product formulas. Always tests well and does nothing in Reader. Help appreciated.
Thanks,
Elliott

Still need help... Here's what George tried Part 1:
Elliot,
Thanks for the file, it looks great. When I changed the field names of
some of your fields (see attached file), the calculations started
working. I thought to change the field names because of the "$" that
was in the field names and thought that might be causing the trouble.
I would have to investigate this is bit more to understand the exact
nature of the problem, but for now, it might be best to limit your
field name character to letters, numbers, decimal point, and
underscore. I'll let you know if I find anything more about this.
If this works for you, you might want to update your forum posting if
you think this could help someone else.
Good luck,
George

Interest not calculating on work orders

Hello,
We have an issue with interest calculation on work orders in the
There is a work order on which monthly interest is
not calculating any more even though there is balance left with the
order.
The interest got calculated till May,2011, but after that interest
calculation got stopped.There is no investment profile is maintained in
the WBS element to which this order is linked.
Please advise.
Thanks & Regards,
Tapan Patro

Hi,
Check the change documnets (CN60) for the WBS to see if the interest profile was removed. If yes, populate the appropriate profile and try the interset calculation again for the WBS.
regards
Sreekanth

FOR ALL ENTRIES IN comando doesent work !!!

Dear all,
I have here a problem with my select. I dont know why it doesent work. In the table gt_struc1 I have 2 entries.
This entries are also in BSAD availible.
belnr
bukrs
gjahr
are the same in gt_struc1 and in BSAD
TYPES: BEGIN OF ts_struc1,
               bukrs        TYPE bukrs,
               gjahr        TYPE gjahr,
               belnr        TYPE belnr_d,
               prctr        TYPE prctr,
       END OF ts_struc1.
DATA: gt_struc1    TYPE TABLE OF ts_struc1,
            lt_tabelle      TYPE REF TO data.
*       BSAD
        CREATE DATA lt_tabelle TYPE STANDARD TABLE OF BSAD.
        ASSIGN lt_tabelle->* TO <ft_itab>.
*       Get data from DB
        SELECT * FROM bsad INTO TABLE <ft_itab>
        FOR ALL ENTRIES IN gt_struc1
          WHERE belnr EQ gt_struc1-belnr AND
                bukrs EQ gt_struc1-bukrs AND
                gjahr EQ gt_struc1-gjahr.

The gt_struc1is correct see blow:
* Über alle Datensätze
LOOP AT lt_content
ASSIGNING <fs_current_set>.
*   Ab welche Zeile
    CHECK sy-tabix >= pa_zeile.
*   Spliten der Daten
    SPLIT <fs_current_set> AT ';' INTO ls_struc1-bukrs
                                       ls_struc1-gjahr
                                       ls_struc1-belnr.
*   Siehe Selektionskriterien
    CHECK ls_struc1-bukrs IN pa_bukrs[].
    CHECK ls_struc1-gjahr IN pa_gjahr[].
    CHECK ls_struc1-belnr IN pa_belnr[].
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ls_struc1-belnr
      IMPORTING
        output = ls_struc1-belnr.
    APPEND ls_struc1 TO gt_struc1.
ENDLOOP.
Edited by: handeglo on Feb 26, 2010 10:29 AM

When i click on firefox it loads but then nothing comes up and it doesent work

When i click on firefox it loads but then nothing comes up and it doesent work

Is the Windows 8.1 system you posted from the one with the problem, or is the problem on a different system? In that case, I assume it's also Windows.
Does Internet Explorer work normally or are all browsers affected?
Did this problem start shortly after any software changes, such as:
* Windows update
* installation of new software
* updates to add-ons
In case the problem is your firewall configuration (for firewall software that blocks programs from accessing the internet), please see: [[Configure firewalls so that Firefox can access the Internet]].
In case the problem is unwanted software or malware, please see: [[Troubleshoot Firefox issues caused by malware]].

One month free doesent work

i have applied for the one month free but it doesent work i cant make calls abroad. but it says that the order is deliverd.

Hi,
Your subscription has been activated.
It includes calls to following destinations only:
Argentina
Australia
Austria
Belgium
Canada - (incl. mobiles)
Chile
Croatia
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Guam
Hong Kong SAR - (incl. mobiles)
Hungary
Ireland, Republic of
Israel
Italy
Japan
Korea
Luxembourg
Malaysia
Netherlands
New Zealand
Norway
Poland
Portugal
Puerto Rico
Russia - St Petersburg
Russia - Moscow
Singapore - (incl. mobiles)
Slovakia
Spain
Sweden
Switzerland
Taiwan
Thailand - (incl. mobiles)
United Kingdom
United States - (incl. mobiles)
Venezuela
If my answer helped to fix your issue, mark it as a Solution to help others.
Thank You!
Please send private messages only upon request.

When ever i turn cellular data off then back on my mobile internet doesent work why does this happen?, when ever i turn cellular data off then back on my mobile internet doesent work why does this happen?

when ever i turn cellular data off then back on my mobile internet doesent work why does this happen?, when ever i turn cellular data off then back on my mobile internet doesent work why does this happen?

You only asked the question 4 times. You have to repeat it at least 10 times to get an answer here, and then only if you supply useful info about your phone.

Calculator wiget works erratically

hi,
It has been a few weeks now that the Calculator widget works erratically.
Half of the buttons work and they change along the way from working to non working.
Anybody got this problem?
Thanks
Michael

REsponding to myself....
Just upgraded to 10.5 and problem solved.

ITunes doesent work anymore

I am running Windows SP. 2 and rescently i downloaded the new version of iTunes and when it downloaded it tried to load it up and nothing happens. I waited for an hour and nothing still happened. I reinstalled it and it still didnt work. Just a few minutes ago i went to the support page and it told me to delete a file ina hidden folder. I did it and restarted my computer and it still doesent work. Can someone please help me!

hi Ashley!
I click to open itunes, and it either doesnt do anything at all or once in a while i get a message saying itunes had an error and needed to close.
oh yuck ... it's fairly rare, but i associate the usually itunes sits there doing nothing, but sometimes i get the 'itunes has encountered an error' message when i try to launch it behavior with a viral infection on the PC. (sometimes people also see a mysterious message about their DrWatson too.)
i'm not sure precisely which virus causes this one ... but if your existing antivirus and antispyware programs aren't picking it up, try Googling for and downloading a free trial copy of the Panda antivirus software. that usually seems to clean it up (whatever it is).
keep us posted.
love, b

Calculator doesent work on currency

Similar Messages

Maybe you are looking for