Calculator doesn't work iMac 10.6.0

hi, after updating iMac, Mac OS X (10.6.8) to mountan lion - calculator in dashboard doesn't work properly ???

Have you checked the "i" button to confirm your settings are as wanted?

Similar Messages

Display doesn't work – iMac does

The display of my now 20 month old iMac behaves very strangely: sometimes when waking up from sleep or when (re-)booting the display remains black while the iMac continues working normally. The background lighting is not zapped (i.e. even if you look closely you cannot see a dim picture) – the screen is completely black, it seems as though the whole display is turned off.
After that and after rebooting over and over again (I don’t know if just waiting some time is enough – didn’t try that yet) the display will at some point turn back on, work normally and remain working – even for several hours – as long as I don’t turn it off. Then (always after I turned it off first, i.e. after shutting down or going to sleep) it may not work again. Sometimes the iMac will go to sleep and wake up normally (or even reboot), but never much more often then two or three times – then the display suddenly refuses to work once again.
When turning the iMac on it sometimes makes a faint if audible beep sound – not the speakers, but as it seems some hardware part (the power unit?!).
I already did a PRAM reset and a Hardware Test. The first didn’t work, the second threw an error at me: 4SNS/1/40000000:TAOP
This is very depressing for me: the display already was defect, luckily when I still had warranty, and was replaced. Then, one month after the warranty ran out the same display suddenly went black (just the background lighting, not the whole display), we let it repair (Apple refused to be tolerant and we had to pay 700 Euro for a new logic board), and now, only a few months later, this? It is very hard for me to accept that a computer has to be repaired three times in less than two years. The device was only lightly used and always stood at the same spot. I don’t get it. I will call Apple tomorrow and see what they have to say – maybe a miracle happens and they will be tolerant this time (I’m not exactly ready to pay hundreds of Euros again, especially if it’s always the display that’s causing the trouble) – but I do not have high hopes. I cannot explain this trouble I’m having with the display over and over again.

I've got my Mac back!
Even though the Finder wasn't running, because I had populated my Dock with dozens of applications, I was able to launch the Terminal app and open a window. From there I was eventually able to launch the Installer, point it at the 10.6.8 Combo Update (for some reason, fortunately, I had downloaded it rather than letting Software Update do it), and wait at least 30 minutes when the installer claimed that there was less than 1 minute left to complete the install. After it was done and I restarted the Mac, it no longer insisted that I needed to send/ignore thousands of "Finder quit unexpectedly." messages and the Finder was running.
BTW, towards the end of the installation (or re-installation), the Finder began to function (my desktop icons appeared and I could open folders) and now the only remaining issue is the Menu Bar won't appear unless I click the Finder in the Dock.
Thanks to those who helped me by providing the instructions needed to use the Terminal window correctly.

Microphone doesn't work imac

I'm trying to use an audiotechnica at2020 with 2008 imac. Neither usb or line input seems to work. Any tips?

hi, did you ever find a soloution to your problem?
I have the same issue as far as i can tell.
my voice is picked up but sounds very distorted and slowed down.
I found that in sound recorder it works perfectly but nowhere else.

Converter doesn't work

My converter (calculator) doesn't work now. It worked always since a year before. At the moment it's possible only to use the calculator for mathematical operations and not to convert currency, lenght, weight and so on.
Thank you in advance for patience and care.

Reinstall a new one by custom installing from the DVD that originally came w/your computer. The calculator will be inside the "Bundled Software" folder.

Home Sharing doesn't work on my iMac (2013)

Hi,
I have an iMac 2013, all my music and movies are on it.
Home Sharing is enabled.
I have the iMac, an iPhone, an iPad and an Apple TV all on the same network, sponsored by a Time Capsule.
None of the 3 devices can connect to the iMac library. The Apple TV doesn't see it. When I add the library in the Remote app of the iPhone and iPad, I have to enter the code in iTunes but then after the app is "looking for the library" without finding it.
The main reason was for me to load my movies from the Apple TV in my living room, but it doesn't work as it can see the Home Sharing. I can though AirPlay the iMac on the Apple TV (so definitely on the same network).
Any idea? I've done the whole bunch of crap from Apple, nothing works. Rebooted like 20 times each.

I brought my macbook air at home, everything worked perfectly: iPhone, iPad and Apple TV can connect. So basically I guessed that the issue was coming from the iMac, something preventing it to be discovered. I've checked the bonjour broadcasting and oh, surprise, the iMac wasn't broadcasting... Weird because it's a setup from a Time Machine, the environment I am running currently on the macbook air.
Anyway, if this can help someone else:
I've ran:
ps aux | grep mDNS
and saw that for the iMac the daemon was launched with the argument -NoMulticastAdvertisements.
I've setup the daemon to run back as normal and restarted the computer:
sudo defaults write /System/Library/LaunchDaemons/com.apple.mDNSResponder ProgramArguments -array /usr/sbin/mDNSResponder -launchd
After the reboot, everything works flawlessly (it has never worked before for the 6 months I had the Apple TV).
Also interesting discovery and I think it's new because I don't remember being able to do that before, but some of my devices are on the separate 5Ghz network, some are on the 2.4Ghz and they can still all communicate flawlessly. I can use AirPlay on the Export Express that is on the 2.4 from the iMac that is on the 5Ghz, and I can access the iMac library from whatever band. Pretty nice!

I upgraded my iMac to 10.9.4. Now the feature where you can go to 4 diff. screens (Command+Control) doesn't work. How do I fix this?

I upgraded my iMac to 10.9.4. Now the feature where you can go to 4 diff. screens (Command+Control) doesn't work.
How do I fix this?

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time?

My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.

I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited. In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items. I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible. I simply deleted that item and now I don't have the situation you described and my wireless is connected. Hope this helps!

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues. I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?

Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck!

I cannot sign into iCloud on my iMac. I have read all of the help information, but that isn't working. I cannot do anything with my system preferences - like add a new printer - because it won't log me in, sign me out, forget password doesn't work, etc.

I have been unable to log in to iCloud on my iMac. None of the hints online have worked. I can't sign in (with any password), sign out, the forget password doesn't work, the support button doesn't work. It's locked. I can't find anyway to fix this - I need to add a new printer ASAP - help!!!

The "Mail, Contacts & Calendars" window popped up a couple of weeks ago and is asking for my Apple ID password, which it will not accept, It won't sign me out (I am not logged in), the support or forgot password buttons won't work. With this window stuck open, I cannot access anything on system preferences. I can't find any way to make it go away. I have tried both my current and old Apple ID passwords, tried using FaceTime to login with the newer password, etc.

OS 10.8 just installed. "Hot Corner" to put new iMac 2.7 GHz Intel Core i5 to sleep mode doesn't work. Have tried cordless and corded mouse with same result. Momentary sleep, immediate wake. Any idea how to fix?

Set "hot corner" to put iMac to sleep. Doesn't work. Selecting the corner will momentarily put to sleep, but immediately rewakes. Have tried all four corners with same result. Have tried with wireless mouse and with corded mouse with same result. Any ideas as to how to fix?

You've been so great, I want to thank you for all the help over a very frustrating day. Last evening, I redownloaded and installed the fresh copy of Mountain Lion. The problem remained. After installing the new OS 10.8, any clicks on a web page (Firefox browser) didn't open the page, but instead made a copy of the page on the desktop. Felt it must be hardware degrading, so I set up a case with Apple support for today. Early in the diagnostics, I had swapped out for a corded mouse and the problem remained. As a last try, I changed out my wireless mouse for a different wireless mouse. That seems to have done the trick. My Logitech mouse is incompatible with OS 10.8.
Thank you again, so much!
.../awards rkaufmann87 500 points!

IMac freezes & Time Machine doesn't work anymore

Hello,
For several days now my trusty iMac (two years old) keeps freezing without a recognizable pattern. Programs like iTunes, iPhoto or maybe even the Finder just stop working and display only the rotating ball - the only thing left to do for me after that is to manually terminate that process or (in the case of the Finder) to restart the whole iMac. I'm really clueless as to where this behaviour suddenly comes from, up until about a week ago the iMac worked perfectly. And now something like this happens every single time I start it.
Another thing that doesn't work anymore is Time Machine. My last automatic backup is from September 17th. After that it just stopped working. Every time an automatic or manual backup is initiated it just says "Searching for backup volume" but doesn't find it, even after several hours of looking. The Time Capsule itself works perfectly, no errors whatsoever.
My iMac is up-to-date, I also already ran the disgnostics of the hard drive program - everything seems to be fine. Can anyone help me?
Thank you in advance,
Paul

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

IMac - Display doesn´t work after restart

My iMac 21 Display doesn´t work after restart. If I turn it off and 1 hour later I want use it again the iMac shows the white screen with the mac logo and then the display goes off. I connected an external display to check if the iMac was ON and with the external display I can login and do everything but the iMac Display doesn´t work .
If I turn it off and wait 3 or 4 hours and then turn it back on the display works OK.
This is very strange behavior I have spent hours and hours trying to fine the solution or a similar issue but nothing so I am looking help here at apple.com
BTW When I bougth the iMac 21 there were some spots over the display so the display was replaced by the provider. The warranty has expired by now.

To tell you the truth, I don't know if they have to repalce the LCD panel or what they do for a bad backlight. In this reality of block or assembly replacement it probably involves repalcing the panel and not the backlight component. Don't know what it would cost. You'd have to ask that of a service center.

IMac 24" iMac (iMac7,1), Intel Core 2 Duo 2,8 GHz Ram 4 MB running OS 10.6.8: impossible upgrade to Mac OSX Mavericks. Already created second account, according to apple online support, but still doesn't work. Thanks for help.

iMac 24" iMac (iMac7,1), Intel Core 2 Duo 2,8 GHz Ram 4 MB running OS 10.6.8: impossible upgrade to Mac OSX Mavericks. Already created second account, according to apple online support, but still doesn't work. Thanks for help.

Your Mac is definitely one of the supported models? http://www.apple.com/uk/osx/specs/
If so, what happens when you try to download? Is it a case of nothing happens? If so, take a look at the suggestions under 'Stalled Download' in this link:
http://www.wired.com/gadgetlab/2013/10/mavericks-issues-and-fixes/#slideid-23477 1
Also, some usrs have found that logging out of the Mac App Store and then back in again and starting over has kick-started the download. It seems that the 5+gb download can take a long time to give any feedback as to what's happening.

Help! I have had my iMac G5 fitted with new Logic Board but it doesn't work

Help! I have had my iMac G5 fitted with new Logic Board but it doesn't work
I have just had my iMac G5 First Gen 1.8Ghz fitted with a new Logic Board under the Apple Repair Extension Programme for iMacs.
I got the iMac home from the repairers and switched it on and everything was working fine for about 2 hours and then all of a sudden the Error Page came up on the Screen (with a big On/Off Switch Logo) and it said I had to shut down.
So I shut it down waited a few minutes and then tried to re-boot it but nothing happened. All that happended was the Power Light in the Right hand corner came on..but nothing else....
Help! Any ideas what to do please?

If you have an external firewire drive (it has to be firewire, USB won't boot on a Rev A), plug it in to the firewire port and turn it on, then boot your iMac and see if it shows on the screen.
Have you tried to hit the eject (up arrow, the last button on the top row of the keyboard) button when you boot, perhaps the repairers left a disc in the drive? Then try and put your install disc in.
Miriam

I cannot sync Ical on my iMac with my professional calendar (outlook web access). and I don't understand why it doesn't work since I have already made it with my iPhone. Help

Hello,
I bought an iMac few days ago. I would like to sync ical on my iMac with my professional calendar I use in my company (from outlook web access).
I was easy to manage it on my iPhone (I just add a new "exchange" mail account and ask for a calendar sync only) and it worked very quickly.
But I cannot do it with the iMac, and I don't undersatnd why?
the domain is is used for my iPhone is the following :
owa.companyname.com
I tried all the solutions I found in this forum but it doesn't work.
Many thanks in advancefor your help.
Matt

Does it have to be an applet?
If you want the same behaviour as in the code with traffic lights, change
class MortgageApplet extends JApplet implements ActionListener {
to
class MortgageApplet extends JFrame implements ActionListener {
and change
public void init() {
to
public MortgageApplet() {

Calculator doesn't work iMac 10.6.0

Similar Messages

Maybe you are looking for