Calculator widget on my desktop??? after upgrading software

I downloaded the new update today for OSX 10.5 and Leopard. After restarting my calculator widget is not only on my dashboard, but desktop too? I don't know why or how to get rid of it. I don't want or need it there. There is no X to clear it and no other widget came up on the desktop. So I'm stumped. Anyone know how to get rid of it?

What update did you install?
Please update your profile - it shows 10.5 which does not mean anything unless you are really running 10.5.0.
Are you saying that a calculator is on your desktop? It may not be a widget. Check your startup item list. Also what happens when you right-click it?

Similar Messages

After upgrading software on my iphone 5. I am not able to in app purchases. I have tried to turn of the restrictions and it is still not letting me make purchases.

After upgrading software on my iphone 5. I am not able to make in app purchases. I have tried to turn off restrictions and still not able to make in app purchases. Can anyone help me?

If there are no restrictions engaged and you are not receiving any Error messages or Alerts...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

After upgrading software microphone doesn't work

After upgrading software microphone doesn't work

Dimitrios44-
Have you tried using the microphone with more than one App? One I use is Skype, which is a free App. Once your are registered with Skype, you can use their test server to record and playback several seconds of your audio.
It may just be coincidence that your microphone stopped working after the upgrade. If you show it to an Apple Store Genius, you may get a new iPad. If that is not convenient, search for an Authorized Apple Repair Center near you. There may be one in your city.
One thing you can try is to reset (reboot) the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred

After upgrading software to 5.0, I lost my Contact List. How do you retrieve it.

After upgrading software to 5.0, I lost my Contact List. How do you retrieve it.

Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.

HT4623 how do I get my apps back on my phone desktop after upgrade to IOS6

How do I get my apps back on my phone desktop after upgrade to IOS6

Sync them back to the iPhone via iTunes or redownload them directly to the iPhone.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you also what your app date, you need to restore from backup. See:
iOS: How to back up

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

You have to go to autherized iPhone agent.

I'm still struggling with being able to sync ipad3 and iphone 4s to itunes after upgrading software to ios 6. I've gone through all the recommendations by Apple and suggestions from other forums and nothing seems to work. Help!!!!!

I'm still struggling with being able to sync ipad3 and iphone 4s to itunes after upgrading software to ios 6. I've gone through all the recommendations by Apple and suggestions from other forums and nothing seems to work. Help!!!!!

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

Driver for the ethernet controller on a HP Pavillion P600000 Series desktop after upgrading to Windows 7 Enterprise?

After upgrading from Windows 7 Home Premium to Windows 7 Enterprise (x64) Service Pack 1 (build 7601), I cannot find working drivers for my ethernet controller. The desktop is a HP Pavillion, Model
No. p6710f. I located the drivers on HP's website, but Windows 7 Enterprise
is not listed as compatible. Compatibility list:
Microsoft Windows 7 Home Basic (64-bit), Microsoft Windows 7 Home Premium (64-bit), Microsoft Windows 7 Professional (64-bit), Microsoft Windows 7 Ultimate (64-bit), Microsoft Windows 7 (64-bit)
The original driver (according to HP's site) is a Realtek PCIe Family networking controller, Version:7.26.902.2010 Rev. A.
I tried contacting HP, but apparently I voided their warranty once I upgraded to Windows 7 Enterprise. I do not have a support plan with Microsoft because the operating system was purchase through TechSoup (nonprofit). I greatly appreciate your help;
let me know if you need more information.

On Fri, 15 Jul 2011 21:36:53 +0000, microsoft_questions wrote:
After upgrading from Windows 7 Home Premium to Windows 7 Enterprise (x64) Service Pack 1 (build 7601), I cannot find working drivers for my ethernet controller. The desktop is a HP Pavillion, Model No. p6710f. I located the drivers on HP's website <http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-89905-1&cc=us&dlc=en&lc=en&os=4063&product=5049513&sw_lang=>,
but Windows 7 Enterprise is not listed as compatible. Compatibility list:
Microsoft Windows 7 Home Basic (64-bit), Microsoft Windows 7 Home Premium (64-bit), Microsoft Windows 7 Professional (64-bit),
Microsoft Windows 7 Ultimate (64-bit), Microsoft Windows 7 (64-bit)
Windows 7 Ultimate and Enterprise are essentially the same with regard
to their software. Only the license is different. So if it's
compatible with Ultimate, it's also compatible with Enterprise.
Ken Blake, Microsoft MVP

Authorization problems after upgrading software

I seem to have some sort of mismatch between the iPod and iTunes with respect to computer authorization. And when I try to authorize this computer, a messags states that this computer is already authorized.
Background: My young son connected our iPod to his computer, where (I think) there is no authorization. Next time I tried to sync it on my own computer, iTunes displayed a message that the iPod was corrupt and I should try to restore it. When I tried that, I got a message, "The iPod ... could not be restored. An unknown error occurred (1415)."
Instructions on this website said I should try upgrading iTunes and rebooting, then try restoring again. I did so, with the result that I got the same error message except with error number 1418.
Other instructions said to make sure the iPod was fully charged. So I charged it overnight and, weirdly, now it seems to be fine. (I didn't even have to "restore" it.)
Except now every time I try to sync, I get this message: "This computer is no longer authorized to play purchased items that are on the iPod ... Would you like to authorize this computer for items purchased from the iTunes store? ..." So I click Authorize and apparently succeed.
But then I got another message, saying that a specific song (purchased yesterday) "was not copied to the iPod ... because you are not authorized to play it on this computer." DOH!
So I go back to iTunes and select Store -> Authorize Computer. But it says this computer is already authorized (which of course it was). But I still can't sync that new song with the iPod mini.
So, as I said, there seems to be some sort of mismatch between the iPod and iTunes with respect to which computer is authorized. Yet when I try to authorize this computer via the iPod message and via Store -> Authorize Computer, both say that this computer is already authorized. Infuriating.
Any suggestions? Please?

I had a similar problem with iTunes when I upgraded to the new 7.5 version. I didn't upgrade my system software or hardware, but I found the Article: 306424 helpful. My problem was with some music that I had purchased with an older Apple ID. I went to the Apple "password recovery" webpage to reset my password for the songs that wouldn't play using the old ID. It worked fine.
If it is any consolation, I am an experienced Mac technician and I am very religious about maintaining my system so that upgrades and updates to software go well. I'm not saying that you haven't maintained your system, but you may want to "repair permissions" using disk utility. I find this step very important to do before and after any software installation or upgrade. I hope this reply helps in some way and best wishes on solving your particular issue.

The location services on my MacPro don't work after upgrading software

AFter upgrading to OSX 10.9.5 on my MacbookPro from 2013, I cannot make Location services work. It's turned on in "Settings>Security &Privacy enabeling Maps, Calendar, Safari and Evernote. what can I do?

You can try the following:
1 Udate all the applications on the app store
2 Creat a backup and do a restore
3 figure it out which applications are failing, by removing them and reinstalling them they should work again
Probably the most secure woudl be #2
Good luck!

Cannot sign in to Skype on Desktop after upgrade - cannot fill in user id and password boxes

My Skype forced me to upgrade right before a phone call today (7/12/2015) (why can't you let me go about my business first and upgrade later?). After the upgrade, Skype failed to aunch, and I received the blank screen at login. I terminated the processes, rebooted, and restarted Skype. I get the login screen, and my user ID is in the pre-filled area, but I cannot change that or type in the user ID box,, and I cannot type in the password box. I also did a system restore to a few days ago, and the same thing is ahppening. I am running the latest Skype (the help dialog works from the login screeen and confrms this)and Windows 7. What should I do?

http://answers.microsoft.com/en-us/ie/forum/ie11-windows_7/cant-type-into-website-boxes-in-ie11windows-7/04b37fa0-d047-4577-9855-41e1930e8d60 As you can see, there might be several causes of this misbehaviour, and you should look of any antivirus/protection software installed on your computer. Meanwhile you can try to make use of the “legacylogin” workaround, which should enable login to Skype using the old legacy login window. However, you will not be able to login using Microsoft account (email address). Quit Skype. Make sure that you don’t see any Skype.exe processes in Windows Task Manager. If necessary, then stop these processes. Open this folder on your computer: C:\Program Files\Skype\Phone\ You should see there the Skype application file (Skype.exe). Right click on the Skype.exe file and select: Send to – Desktop (create shortcut). Right click on the newly created shortcut and select Properties and then the Shortcut tab. In the Target field you will see now: "C:\Program Files\Skype\Phone\Skype.exe" Click with your mouse on the text in the Target field and move your curser one space after the last quotation sign and add the text /legacylogin. The text in the Target field should now read: "C:\Program Files\Skype\Phone\Skype.exe" /legacylogin Click OK to save the changes. Start Skype using this new shortcut. Try now login to Skype?

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

Google Maps Widget doesn't work after upgrade to Safari 4.0

After a lengthy bit of trouble shooting with an iWeb specialist yesterday, we reached a conclusion that somehow installing the release version of Safari 4.0 (released Monday, 6/8) causes the GoogleMaps widget to not function or display properly. Using backup harddrives of recent systems, the widget worked properly in OS X 10.5.7 running iWeb 3.0.1 with both Safari 3.2 and the BETA VERSION of Safari 4. On that same system, once I download and installed the release of Safari 4., the maps widget would not work or display properly.
To describe what doesn't work: None of the options (search field, address bubble, or zoom controls) appear regardless of what the user selects in the HUD when creating or editing the content. I am unable to pan and/or scroll around the map within its bounding box at all. The only thing I am able to do is edit the address field in the HUD and end up with a map with that location centered in the window.
The AppleCare specialist didn't have much response in that I think this is a brand new and VERY obscure bug.
I am curious to know if anyone else has exprienced this condition.

It may be obscure in iWeb but the Safari 4 update has messed up the Google maps in iPhoto big time. Be sure to report it as they are all related to the Safari 4 upgrade and probably only be solved by a Safari fix.
http://www.apple.com/feedback/iweb.html
OT

G5 Quad - No Airport Reception After Upgrade - Software Issue

Hi,
I've just installed a 'wireless upgrade kit' in my quad (yes, I know it says AASP install only but I did in anyway). Bluetooth is working fine but airport gives me no reception at all.
Now, after some poking around I became pretty convinced this was a software issue. The system I'm running on the quad has been cloned from that on my old DP 2.5 ghz G5. I tried a fresh install on an external disc from the install discs that came with the quad and, lo and behold, airport works like a dream!!
So my question is - is there any way to migrate whatever extensions (or whatever) I need from the 'clean' system to my 'cloned' system so I don't have to start everything from scratch? I've tried an 'archive and install' but still no reception after that so I guess whatever I need must be in one of the folders that was archived...
What software bits and bobs does airport require to work?
Can anyone help me out here?
cheers

I never found a solution to this. Just had to reinstall everything from the discs that came with the Quad. Annoying.
But no airport reception can definitely be down to software!!

Lost my iBooks after upgrading software, how can I get them?

Lost my iBooks that I had purchased before I upgrade to io5. How can I see all iBooks that I had purchased?

I have very similar problem. I purchased an ibook and it DL-ed fine on ipad-1. However, after software upgrade I lost many chapters of the book and all pics in book. Tried the fix of deleting the ibook and re-DLing it from "Purchases" but it keeps DLing the same book with missing chapters & pics.
Very frustrating. How to fix this?

Calculator widget on my desktop??? after upgrading software

Similar Messages

Maybe you are looking for