CalDAV and CardDAV issues

Hi,
I just got my new Z10 ... it looks and works great.
However, when I try to get the CalDAV configured against a Zimbra or OwnCloud backend it keeps asking for an e-mail address to use as the login.
These two services use the username. Why can't the client be configured to use the specific username instead of being forced to use the e-mail address as the username.
I know there are issues with the Google Calendars but these other ones are not working at all either.
Is there something I can do to workaround this issue since I am not the administrator of the CalDAV services I am connecting to I can't change my username to be the same as the e-mail address?
Thanks!

I spend some nights with my new Z10 and ownCloud (4.5.7 and 5.0.0).
I checked out what's going on (wireshark is very, very useful) :
Here's a short summary:
email adress is not necessary (to connect to ownCloud), username and password are used
Server name ist really just the server (a port number may be added); no protocol, no path/filename
https is alwas used, thus default port is 443
ownCloud sends http redirects to phone's requests, but BB doesn't seem to handle them properly.
The last item mentions the problem(s)
For some reason ownCloud only responds to
<servername>/<path>/remote.php/<application, eg. carddav>
BB requests two paths: "/" and ".well-known" -> ownCloud sends redirects (per default HTTP 302 "Found", other 30x codes don't work either)
BB ignores the redirect respones; instead it just retries
I modified ownCloud's internal checks in order to make it respone to ".well-known" requests.
It wasn't actuall stable, but at least I was able to load my old phone's contacts...
CalDAV appeared to work to, but then the Z10 killed the calendar application whenever I attempted to enter a date.

Similar Messages

Major CalDav and Syncing Issues with Ical and Address Book

As a CEO and business owner - I loved the move over to Mac after the intel chip as installed. Yet, the issue of working on a Mac for business comes down to the operating system. Up to Snow Leopard I was very pleased.... since Lion it has gone downhill.   I upgraded to Mountain Lion and many of the issues with speed and problems with mail were addressed. Yet, it appears Apple has made a bad decision with regard to synciing to other programs.
I was told it has cut out syncing capablities for Address book and Ical (I assume other programs). This has caused great issues for The Omni Group, File Maker and Market Cirlce (creators of Daylite) and a lot of angst for me as a business owner!
To top this off - it appears CalDav is not bi-directional and has issues. In other words, it does not work as it should.
I am not sure what Apple was thining when it stopped allowing internal sync between programs. Yet, CalDav and CardDav are not always the answers!
I hope the CalDav issues are being cleaned up and if anyone from Apple wishes to comment on this I would appreciate it. I have tried to talk to support but the powers to be are the ones calling the shots on software design. Support can't fix what is broken the program.
Again, I hope Apple revisits syncing. Maybe the concern is security but it is MY DATA not yours. I just want the programs to work so I can make sales and support my customers efficiently.   You have made it hard to do this with changes.
David

As an IT consultant, i'm in agreement with Mr Utts.    The promise of "it just works" died with Steve Jobs.   Mac OS has been in freefall since 10.5 .    I need a fully functional OS, not an iPad on my desk. ( this means YOU Forstall !! )
Why break Samba ( a standard ), why break WebDAV ( a standard ), why break CalDAV ( a standard )??    Apple has done ALL of these things and they seem to be doing it on purpose.
The Apple "ecosystem" is just fine, but removing functionality as fast as you can, and removing interoperablity as fast as you can... if Apple products ONLY work within the ecosystem... people can and will leave Apple.    You've already run off the business users by refusing to make a real Server or real Server software.   You ran off the video user with Final Cut Pro X.   Dumbing down (and breaking) the OS is running off the IT User.
Mac OS used to easily walk the line of "hard core enough for a Unix Guru, easy enough for your Mom". Now they just want the Moms.
And i disagree, we are ALL "qualified to say what Apple might do about this...", they will do nothing.   They don't beleive they have made a mistake. They beleive WE are the problem by stubbornly insisting that things that used to work should continue to work.

How do I setup CalDav and CardDav servers on my Mac to enable local 'cloud' syncing in Mavericks

I've decided to start off a new thread having initially posted on How to locally sync an iPhone with OS X Mavericks? iCloud is NOT an option.
It is clear to me that it is possible to establish syncing locally without going outside one's own home, and without internet access. I am bugged by the fact that the previous service has gone without any user focussed warning, but I am keen to find a way of solving the problem. If you are just frustrated, I'd be grateful if you can keep your annoyance off this thread.
My guess is that a CalDav and CardDav server hosted on my own Mac can be set upt to sync with my iPhone (3GS) either on a Computer-to-Computer (ad hoc) network or via my own home LAN. The trouble is I am not network/Apache savvy enough to use it.
I am reluctant to fork out an additional amount for the Mavericks server as I don't have any other foreseeable need for it, but Mavericks comes with Apache pre-loaded and there is a very light, simple and free open source CalDav and CardDav server in Baïkal. The trouble is I am not apache/network savvy enough to make use of it, and basically I am stumbling along in the near dark with terminal.
There are some good resources for setting up Apache and for setting up Virtual Hosts which would host my personal 'cloud', and Baïkal also comes with setup guides as well. The trouble is, I don't quite have enough knowledge to marry the two together. Is there anyone contributing to or watching this thread who has the know-how to do a proper step by step guide for running Baïkal on Apache as installed in the Mavericks OS, and setting up a local 'cloud'.
AFAICT the problem with the resources I have found is that the Apache stuff I've found doesn't particularly focus on running Baïkal, and the Baïkal documentation is not specific to Apache on Mavericks. Is there anyone out there who can give me some help with this?
Can anyone help - please?

I've now downloaded ownCloud 4.5.13 and followed the installation instructions in the Administrators Manual. I am slightly concerned to read under MacOS: "This section of the manual needs to be revised."
However, I have followed the instructions there, and step 5 has taken me to the web setup page where I have created an account with user name and password.
Then I went to Calendar, and from the Calendar menu chose Add Account… In the dialog that followed I chose Add CalDAV Account. I chose Account Type Manual and put in the username and password I used when setting up the ownCloud account. For the URL I followed the manual and put: http://ADDRESS/remote.php/caldav/principals/username/ substituing 'localhost:8888/ownCloud' for the address, and my ownCloud username for the username. (If I just used 'localhost:8888' for the address it produced the message: "The URL http://localhost:8888/remote.php/caldav/principals/[myusername]/ encountered HTTP error 404. Make sure the URL is correct.".)
So far I am semi-sucessful. It has created a Http://Localhost:8888/Owncloud account on Calendar in which I have been able to creat a test calendar and an event. I have also deleted the event, but Calendar will not let me delete the calendar. Once I inserted a second calendar the Delete command became available, but failed with this notice: "http://localhost:8888/ownCloud/remote.php/caldav/principals/[myusername]/ is not a location that supports this request." A retry deleted the name of the calendar, but left it otherwise intact. The account now has a grey triangle next to it which when clicked produces the following: "The request (CalDAVCalendarSplitDualTypeCalendarQueueableOperation) for account “Http://Localhost:8888/Owncloud/Remote” failed."
I think this may be resolved by an ownCloud setting. I will see if I can track this down. Has anyone here got any thoughts?
[I'm sorry I seem to be unable to prevent the editor from creating clickable links from the URLs I am posting]
Message was edited by: James Richards

Who got caldav and carddav push running successful on lion server?

Hello everybody,
I am running OS X Server since 10.5 server which I upgraded to 10.6 server in the past without problems, upgrading 10.6 to 10.7 was is a mess and none of my serveral upgrades attempts were leading into a "stable" lion server so I ended up with manual upgrading my data into a clean install of lion server.
After data migration most of my services are working as usual (some profilemanager quirks but that don't bother me for now).
Only when it comes to push for calendar and addressbook services I am getting frustrated!
Push mail is running fine for my iDevices (Push is listed on my iPhone and iPad and Mac) but for caldav and carddav my caldavd error.logs are throwing error messages like this if I access iCal or addressbook via Mac or iDevice (no Push available on iPhone or iPad neither on my Mac).
Those for caldav
2011-09-23 11:29:18+0200 [-] [caldav-0] [-] [twistedcaldav.notify.Notifier#warn] Could not create node /CalDAV/myserver.fqdn/FEF253F7-9A6C-4242-A990-88960832BF5F/
2011-09-23 11:29:18+0200 [-] [notifications] 2011-09-23 11:29:18+0200 [XmlStream,client] [twistedcaldav.notify.XMPPNotifier#error] PubSub node configuration error: <error code='403' type='auth'><forbidden xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/></error>
2011-09-23 11:29:18+0200 [-] [notifications] 2011-09-23 11:29:18+0200 [XmlStream,client] [twistedcaldav.notify.XMPPNotifier#error] PubSub node configuration error: <error code='403' type='auth'><forbidden xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/></error>
and those for carddav
2011-09-23 11:24:35+0200 [-] [caldav-1] [-] [twistedcaldav.notify.Notifier#warn] Could not create node /CardDAV/myserver.fqdn/FEF253F7-9A6C-4242-A990-88960832BF5F/
2011-09-23 11:24:35+0200 [-] [notifications] 2011-09-23 11:24:35+0200 [XmlStream,client] [twistedcaldav.notify.XMPPNotifier#error] PubSub node configuration error: <error code='403' type='auth'><forbidden xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/></error>
2011-09-23 11:24:35+0200 [-] [notifications] 2011-09-23 11:24:35+0200 [XmlStream,client] [twistedcaldav.notify.XMPPNotifier#error] PubSub node configuration error: <error code='403' type='auth'><forbidden xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/></error>
I tried several thing (changing serveradmin settings, plist and other configuration files, checking passwords, renew apple push certificates etc.) but that changed nothing, so if one got those push services running correctly I would appreciate if one could share his configuration so I can compare it with mine.
I think those files and output are interesting for the configuration, if some other files are important please note them.
If one feel afraid to post his configuration for security reasons etc. please ask for my email address
Output of terminal command:
sudo serveradmin settings calendar
sudo serveradmin settings addressbook
sudo serveradmin settings notification
sudo serveradmin jabber
plist and other configuration files of interest
/etc/caldavd/caldavd.plist
/etc/jabberd/*
/etc/jabberd_notification/*
Best regards,
Eldrik

This error... <error code='403' type='auth'><forbidden xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/></error> ...looks like the XMPP notification server is not allowing the calendar server's XMPP account (or "JID") to create/configure pubsub nodes. The XMPP notification server keeps a list of privileged JIDs in /Library/Preferences/com.apple.NotificationServer.plist.
First, check to see that calendar server is configured to use the "com.apple.notificationuser@<your hostname>" account by running this command in terminal:
sudo serveradmin settings calendar:Notifications:Services:XMPPNotifier:JID
You should see something like:
calendar:Notifications:Services:XMPPNotifier:JID = "[email protected]"
Next, see who is in the notification server's "privileged users" list via:
serveradmin settings notification:privilegedUsers
You should see something like:
notification:privilegedUsers:_array_index:0 = "_notification_user"
notification:privilegedUsers:_array_index:1 = "com.apple.notificationuser"
If you don't see "com.apple.notificationuser", you'll need to edit /Library/Preferences/com.apple.NotificationServer.plist and add it to the "privilegedUsers" array like:
<key>privilegedUsers</key>
          <array>
     <string>_notification_user</string>
     <string>com.apple.notificationuser</string>
          </array>
Then I would recommend rebooting the server so that you are sure the notification server is restarted and re-reads the plist.

IOS7 iphone 4S hides CalDav and CardDav outside LAN

Dear Apple Community,
I couldn't find a solution with Google & Co. So here is my Problem:
Since I updated our business iphone 4S (luckily only two at the moment) to iOS7, the CardDav contacts and CalDav calendars disappear on the phone once it is approximately one or two days outside the office Wifi LAN and without contact to the CardDav/CalDav OSX (10.8.5) Server.
The CardDav and CalDav accounts are still visible in the settings menu on the iphone, but disappear in the corespondent App (Calendar/Addressbook).
Once I re-enter the Wifi LAN the calendars and contacts re-appear.
I did never experience this behavior with iOS 6 nor 5.
At the moment our server is not set to be reachable from WAN for security reasons.
We recently performed an update to 10.8 on our server, however the
'disappearing' happened also under 10.6. So I strongly believe it is an iOS7 issue.
Is this behavior a feature or a fault?
If it is a feature, please tell me, where I can disable it, or which settings are wrong.
Thank you very much,
Stefan

Hi wjosten,
thanks for the quick reply. I have seen that thread, but it does not quite catch my problem.
The Sync with the iPhones and the Server work perfect.
But the iPhone somehow decides after a while, when it can't reach the server anymore, to hide the contacts from the carddav and also the calendars from the caldav accounts.
e.g. When you go into the Adressbook - Groups -> you usually see the CardDav Groups ... but they magically disappear after a few days without being in the office LAN. Of course also the corespondent Adressbook entries disappear. The same applies to the Calendar Accounts.
However, they are still visible in the main configuration.
I hope, my problem is clearer now.
Stefan

IOS 8 Google Setup Using Caldav and Carddav

Does the built-in Google account under Mail, Contacts, and Calendar use cardav and caldav when I setup my google account? Currently I’m using Google for email only and then I have separate carddav and caldav accounts for my Contacts and Calendar to be sure I’m using the proper setup. I’m looking to simplify my setup on my IOS devices.

I recall a couple years ago when I set it up there were limitations, I forget what they were now, to using active sync and people recommended using cardav and caldav. I have a Google Apps for Domains account that I’m using. At this point I see no reason to investigate further.
Thanks again!

Birthday calendar bizarre repetitions and other issues

I have the STRANGEST things happening with birthdays on both my iPhone (5, 32GB, white, iOS 6) and iPad (32GB, iOS 6, white).
I'm posting it here in the iPhone forum, assuming more people may be able to help.
First of all, I sync a Google Apps calendar with my iPhone and iPad via CalDAV. I also sync my Google Contacts with my address book (including birthdays), which syncs via my MacBook on OS 10.6.8 using the sync icon in the system tray. (I hesitate to call it MobileMe, even though that's what the System Preferences calls it, because it really has nothing to do with MobileMe -- it does not sync via MobileMe [I do not have an account], it just syncs my Address Book with Google with my phone or iPad when hooked up. It is through a WIRED connection that it does the final sync to the device.)
So, my birthdays from my address/contact books and my Google contacts DO sync and they DO show up on both my iOS devices in the fancy Birthday calendar with the cute cake symbol, as well as in my Google calendar.
NOW HERE'S THE CRAZY PARTS.
Sometime recently, my birthdays were getting repeated. But oddly, enough they are a different amount on the two iOS devices. I have 18 copies of all birthdays (on the same day) in my iPhone calendar and 68 (YES, SIXTY-EIGHT COPIES) in my iPad of every birthday.
My Google calendar shows NO SUCH ERRONEOUS copies.
The crazier thing is that the copies of the birthdays are NOT on the birthday calendar. In fact, IT'S AS IF THEY JUMP AROUND ON DIFFERENT CALENDARS. They show up all one color, but some random color. They will appear or disappear only SOMETIMES if I turn "off" some calendars or others (for example, once they would go away if I hid a "Personal" calendar, another if I hid a calendar I subscribe to via Google but sync via CalDAV from Weather Underground, and another calendar that is a Google calendar but also my "default calendar" in the iOS settings). And this is all within minutes.
When I go into an instance of the repeated calendar event, it will actually say it belongs to my default calendar, regardless of what was hiding or showing it before.
When I try to "edit" the birthday just to see what happens, it crashes the app.
WHAT. THE. ______???
Here's what already I've tried:
Searching the internet for someone with a similar problem. NADA.
Turning off the option to sync my Google birthday calendar via the Google sync page (I think it's actually unnecessary anyway, since iOS pulls from the contact book, anyway). That did nothing.
Hiding all calendars and then selecting them to show one at a time to figure out which calendar was causing the problem, but as I mentioned above, it is not consistent.
Re-syncing my devices with iTunes.
Searching for and merging duplicate contacts in Google contacts.
Turning off the iOS birthday calendar.
Killing and re-starting the calendar app.
Re-starting my iOS devices.
Re-syncing my contact book with my devices.
Someone. Please. Tell me you're having this problem and that you have the solution? I'm going crazy over here! I can't remember anything that may have triggered this to happen.

I figured it out! (Or at least, it's been fixed for a day on both my iPad and iPhone.)
By the way, I discovered more oddities, but I'm not going to even bother with describing them.)
I am assuming everyone here has been syncing their birthday calendar off of Google/Gmail (whether CalDAV or Exchange, it doesn't matter).
The key to this is to know three things:
A) Tgara was on to something: syncing the Google birthday calendar in your Google sync settings -- even though it does not show up in your calendar list on the iphone/ipad -- is the culprit.
B) BUT, simply un-syncing will not make them go away unless you completely un-sync all your Google calendars. Once the repetitions get into your phone/iPad via they are kind of "stuck" there, and you've got to go back to the beginning to un-stick them for good.
C) Thus, it may require some trial and error because I had to repeat this a couple times. I may no have the right order of operations, but this is my best recreation/guess.
How I fixed it (I had to repeat a couple times for some reason):
1) I'm debating whether you have to do this step (I think I did it on my iPhone, but not my iPad, and yet both worked), but it doesn't take long, so you could just to be safe: on your iOS device, Settings > Mail, Contacts, Calendars -- delete your Google calendar account.
2) On your iOS device, go to the proper Google sync page to choose what calendars are available for syncing.
For Exchange, go to: https://m.google.com/sync/settings/iconfig/device
For CalDAV and Gmail/normal sync, go to: https://www.google.com/calendar/b/0/iphoneselect
For Google Apps CalDAV (although it worked for me on the normal page above), go to: https://www.google.com/calendar/hosted/yourhosteddomain.com/iphoneselect
If you're not sure which method you use, do both of them.
3) Sign in and choose the device in question (if prompted) and then uncheck ALL the calendars. Save/apply.
4) Go to calendar app. You should have an On my iPhone or On my iPad calendar and the iOS birthday calendar. Ensure that no repetitions are seen when you check mark each calendar idividually and also collectively to be visible. If there are, repeat the steps above.
5) Once the repetitions are gone, go to your iOS settings and add the calendar account back in if you removed it in step one.
6) Go back to the calendar app. Again, you will have two calendars -- one default Google calendar and one ios birthday calendar. Turn on each one at a time and also together to make sure the repetitions are gone. If they are not, repeat the above again.
7) Once they are gone, go back to the Google sync page(s) and add all the calendars you want back, BUT DO NOT SELECT YOUR BIRTHDAY CALENDAR. Save/apply.
8) Go to the calendar app. Open up the calendar list. Wait for it to refresh. Now you should be able to turn on all your calendars you wish to see, wait for it to propagate, and confirm there are no copies. If there are copies, repeat all the steps!
YOU DO NOT need to erase your contacts. Not sure about iGust's work-around, but that's unnecessary. And christina44, I actually think this is a different problem. All my copies were on the correct date.

Failed Hardware Scan and other issues E440

Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description                                           Symptom
IMAGE                                                             Replaced due to engineering change
System board                                                 Network card error
Hard disk drive                                                Network card error
ECA-WIRELESS                                            <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

Battery, heat, and ringer issues

I recently purchased the Iphone 4s.. this is my first iphone
I did the update that Apple sent out to help the battery and it seems like it worse then before the update?? My phone has been off the charger for 45 minutes, I sent 1 text message, and had 1 phone call. The percentage is now at 87. It the last 2 minutes i have watched it go down 2%? Is this normal? Also, the phone gets REALLY hot...
If not, what do I do now??
Also, I keep missing phone calls because I don't hear the phone ring... but the ringer is all the way up..
Any help will be greatly appreciated!!

mdorling wrote:
We've got the same issues, the BBM contacts went, now the BB won't charge ... we've tried all ways to get it to charge ... typically it's just over a month old so we can't get a full refund ... we are on here trying to find out what we need to do as we can't obtain a telephone number for BB customer services nor an email address only a tweet address which I haven't downloaded onto my handset. So am stuck!!! Any and all advice very gratefully received as seriously peeved with BB models now. My first BB was fantastic ... but all newer models have had problems ... think BB needs to ensure that all techy problems are fully ironed out prior to launching their new BB handset!
1. Connect your Z10 to the wall outlet charger for an hour and then with the Z10 powered on, and with it STILL CONNECTED, remove the battery for a minute and replace. This will normally reset the the on-device battery meter and allow the charging status and percentage to show more correctly.
2. Orange is your tech support contact and any issue which they cannot resolve, they should escalate up to BlackBerry tier two tech support, or you should ask/demand that.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

New Airport Extreme and iPhone Issues

I've had the networking day from ****. I previously had a 3rd Gen Time Capsule at our restaurant, connected to a Cisco 26port gigabit POE switch and Comcast digital voice and internet. Over the past few days, employees have reported trouble accessing the the Wifi network. After several restarts and firmware upgrades (including the dreaded "firmware problem" to fine update), nothing worked. I changed channels, back to auto, back to specific channels, back to auto. Made open guest networks. Nothing worked consistently. My iPhone might connect and my friend's might not. Nor his laptop consistently. Our Axis network cameras might take a bit extra time to connect. All quite random and quite frustrating.
So I swap out an older Airport Extreme (4th gen I believe) using the same configuration as the TC (Time Capsule). It works fine, except for the last port not working as expected. No matter, I plug the mac mini into the Cisco switch and off we go. Nevertheless, I'm still told we are suffering random Wifi issues. So I buy a brand new AE (5th gen) today to replace that one. Should work like a charm I thought. Right....
Several hours later, I finally have the new AE working, but only after doing several hard resets/factory restores, the works. For some reason, the mac mini could not successfully update any of the connected AEs - whether connected directly into the same AE, or if the Mini was connected to the switch. Nothing worked. Every time I tried to update the AE, it would hang and force me to unplug and plug it back in. It would also never save setting changes. I finally resorted to a friend's macbook to be able to restore it successfully. And once that worked, the mini was able to update the AE flawlessly. Our Point of Sales (POS) machines connect fine, our cameras connect fine, wifi printer connects, and the mini connects, and everything has internet.
Except my iPhone 5. Of course. It gets a signal fine (full bars). It gets an IP address. But I can't surf the web. Or download email. Or iMessages. Anything. No internet access. I try hard restarts on my iphone. I try assigning IP addresses by MAC address. I try resetting the AE. I try renaming the WiFi name. Nothing. I can make a guest network that works (on a different IP table, btw - 172, not 192.) But other than that, no access. Grrrr.
So I have a "working" AE router where some devices successfully connect (through wifi and ethernet) and some dont' (wifi iPhone). My iPhone connects fine to my home TC. So shouldn't be anything to do with that. But I'm at a loss. I'm going to go back and restore everything and power cycle everything tonight or tomorrow night. I don't know if that will help, but it's worth a try. Lord knows it feels like I've tried everything else.
Anyone have any good ideas of where to start besides voodoo dolls and baseball bats?

I took mine back, because I was having these very same issues. We use contivity too. I was able to connect only to one of three of the servers we manage (in Europe). I couldn't connect to the servers in Asia or here in the USA.
Replaced the Airport Extreme with my trusty old d-link 624, and no issues connecting to any of the three hubs.
Otherwise, I liked the Airport Extreme, and I'll consider buying it again when and if they address this VPN issue. I work at home so its obviously a "deal breaker" for me.

IQ826t Restart and Heating Issue

One thing I definitely do not like the HP's support especially when they will not allow us to buy a 7 Upgrade from Vista nor will they support something (even when I find their glitches and they admit after telling me it was just the OS).. On Repair work, I had to ship it out and this will be my 2-3 time to do repair on this PC in the past 3 years (and I have to wait a week for the repair to be done...)
Besides that, IQ826t, Win 7 Ultimate SP1
All Drivers are up to date with HP website (utilizing Win 7 64 bit drivers and Firmware is up to date). AVG update/scan (no issue - confirmed even rootkit).. Malwarebyte - Scan and no issue
Disk Cleanup, Disk Defragmentation done on a monthly and quarterly schedule
Biggest Issue:
I am getting a crash with Win 7 0x124 Stop Error Message (happens periodically and even after a reboot)
Never had this issue until May and the upgrade to Win 7 was done last year with SP1 update done on March (so it is not an issue with the OS as HP support personnel seems to think... I proved them the issue with Windows Update History, The Bluescreen error code on my error code reader).. This machine under warranty and I had issues with it constant (even in Vista)
They state that it is the OS.. Again, if that was the case, I would think it would happen right away like my Toshiba on SP1 upgrade... That was not the case in the matter. I have a firmware reset (default settings) and the issue persist..
The Error Code relates always HAL.dll or ntoskrnl.exe
One if hardware compatiblity and the other is an OS kernel exe file.. And this usually checking knowledge base relates to hardware failing due to 1) Compatibility (which HP website confirms is not the case) 2) OS corruption (which is not the case checking on safe mode and this happening STILL 3) Heat Issue (which I believe is the issue and was been documented on the Internet
What I am noticing is the unit is extremely HOT (vent is almost burning when it has been off and just turned on).. I wonder if the hardware pieces are literally melting to destruction since I can't just open it up (they state it will void my warranty)
The Symptoms before the Crash (happens any time.. Even right after a power up)
If you are playing audio or video, you will start to hear jitters and sound seems to echo itself .. Video would start to lag and become choppy.. Systems start to slow down and things seem to run very slow.. I have seen the power light on the PC start on but the touchscreen just go black (will not restart sometimes)..
Minor Issues (but could be related)
1) When running PC Hardware Diagnostic, they will come up with an error code in the past and that was warranted for a motherboard replacement (of course, they ship the box to the wrong location and I was in the middle of my wedding so I get to it now).. It was pertaining to PCI Express Status ICH9 PCI Express Root Port where it will generate an error code... Now, running the diagnostic... I will not get any error but PCI Express Root Port 3 & 5 do not show up on the diagnostic... Wouldn't that obvious show something that is a problem when there are 6 ports (which on the previous diagnostic that I can't grab past logs shows that). That is not warranted for a warranty work? Just a note, I got the fail test code (which was intermittent but keep happening and the tech support would not look at previous case.. Port 4 failed and a fatal device code)
2) Blu-Ray player will not run and their answer is that it is your Blu-Ray until they realize that I ran it on 3 different Blu-Ray player standalone, different Blu-Ray, and confirm DVD will work.. They still think it is a software issue until they can't deny my point when it will not read the Blu-Ray no matter what (they took control and confirmed it).. They believe the HP SmartDVD software was failing because of Win 7 and not Vista (even when I downgrade and confirm it works, I stated the software is the issue... Lone and behold, 2 months later they had an update that they refuse to admit I was RIGHT on the matter and done 15 hours of troubleshooting that they were wrong about)
3) Wireless Keyboard and Mouse lost connectivity even if the battery is not low... Just stop typing or omit letters.. This is considering the keyboard is literally in front of the touchscreen
4) Touchscreen is sensitive when it wants to be but won't in other... Constant issues there
This is why I have so much issue with support.. They seem to show that they will do anything to deny the issue.. Heck, I am a computer technian calling on the issue.. It ain't like I didn't troubleshoot on the matter... But they think we are all morons and when I prove them wrong, they will use any excuse to honor warranty... That is why it is amazing..

Look in your Settings > App Manager.
Tap Device Monitor.
Tap the Battery tab.
At the upper right, tap "Since Last Charge" to change to "Last 48 Hours".
What apps or processes are consuming the most battery power?
ALSO, in setting up your new Z30, are you syncing many contacts or calendar data from a connected email account?
Social accounts such as Facebook or Twitter?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Just updated to IOS 7 and two issues: First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

Just updated to IOS 7 and two issues:
First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services". I'm not sure what this really means...
The second issue is when I try to select "Manually Manage Music"
The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC". Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
So... I don't want to do that, but I do what to be able to Manage my music. I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
Anyone have any ideas?

I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

PO number and material issued against this PO for subcontracting

How to know the link in between the PO number and material issued against this PO for subcontracting.
I have checked that PO history is not getting updated.
Thanks,

Hi,
We have 2 different scenarios where you can post a goods issue to Subcontract Venodrs.
Scenarios 1: You can post the goods issue against a subcontrac vendor with out referencing the Subcon PO from ME2O, at this stage we will be knowing what is the stock at subcontract vendor but we will not be knowing the issues against which and how much Quantities are posted.
So when we are post goods receipt, then we will come to know the consuption quantities.
Scenario: 2, If we use the delivery concept then we can track the goods issues against the subcon POs.
If you really keen to track the material issued to Subcon vendor against a PO so better use with delivery.
Thansk,
Satya.

OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:

OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:
The problem on my Intel Mac mini with external Klipsch speakers (two mid-range/high and a subwoofer) is REAL obvious as the system emits a hum like a Spinal Tap amplifier turned up to #11 when 10.4.10 powers down the audio circuitry
Then, if I play a song in iTunes, it first pops and the hum disappears right before playing.
Quite annoying. I restored the mini from a recent backup to 10.4.9. Problem gone.
I'm glad I test updates on the mini before applying them to my Intel iMac 24. I guess I'll just hide & watch what happens before doing any more updates.
Here's what I sent to Apple tech support:
Guys/Gals (OS X Engineers):
Concerning the Snap, Crackle Pop Audio problem in the 10.4.10 update:
Please. Just do the right thing and fix the audio.
There is no need to power cycle the audio subsystem to save .0005 amps on the laptop line.
And then to make your Mac mini/iMac/other desktop users have to put up with it when using AC power is ridiculous.
Put the audio subsystem back like it was in 10.4.9 and let the laptop battery freaks looking for mini-amp savings get a "work-a-round".
Crikey!
iMac 2.16 Ghz Intel Core 2 Duo 2GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair
Mac Mini 1.83 Ghz Intel Core Duo 1GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair

Libby,
Backup is unable to make a restorable by Disk Utility backup. You can restore pieces of the software as outlined in my FAQ about backing up user data:
http://www.macmaps.com/backup.html
But to be able to restore a backup with Disk Utility, you need a cloning utility to have made the backup.
I suggest starting a new thread here, where someone else could help you out better:
http://discussions.apple.com/forum.jspa?forumID=752&start=0
First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.

Quality of Service and Jitter issues

I am having poor quality of service (36%) and Jitter issues (36ms). I called Verizon Fios technical support and was told that my connection is fine and that it must be a vendor issue. Only vendor I'm having an issue with is Verizon. If I can't get someone from Verizon that knows what QoS and Jitter is on the phone to help me troubleshoot this issue I'm going to have to cancel my service and find a provider that has someone technical providing tech support.

Upstream jitter
35.7 ms
Downstream jitter
6.0 ms
Upstream packet loss
0.8 %
Downstream packet loss
0.0 %
Upstream packet order
100.0 %
Downstream packet order
100.0 %
Packet discards
5.1 %
MOS
3.4

CalDAV and CardDAV issues

Similar Messages

Maybe you are looking for