Caldigit raid migration problems

Hey,
So long story short apple has decided to crew my 2008 mac pro for a new 2009! Which is pretty awesome, except for one small (big) problem. I have a 4 drive raid 5 array off of the Caldigit raid card... however the new system does not have an ipass cable, correct? Meaning I can't connect my raid card..
So here's my problem, I already dropped a bunch of money on this raid card, but I really need a raid 5 array for what I do, any suggestions?

Thank you. You are correct about the built in drivers. My understanding is that those are just to allow the card/raid to function. The drivers do not allow for any manipulation or control of the raid or any alarms. That's what the Raid Shield is for. If you uninstall the Raid Shield, you cannot see or manipulate the card or raid set, install firmware, or change settings at all, while it will function fine as a drive under Lion or ML. I have uninstalled it and the raid works fine but I can't control it or see the details if I have to which leaves me uncomfortable.
Raid Shield does function.................you just have to clear the error, do what you want quickly, and execute before the error comes back or you just have to clear it again.
Frustrating.

Similar Messages

  • My Caldigit Raid Card problem and..

    Hi everyone,
    Recently I purchased a Caldigit Raid Card and Installed it to slot 3 in my 8-core Mac Pro(Early 2008).
    But, my Mac Pro is making a loud fan noise.
    According to Caldigit, if Mac Pro's iPass cable is not properly seated to Caldigit Raid Card's J18 Mini-SAS connector, there will be a fan issue that he's experienced.
    But My Installation was absolutely correct and my Mac Pro is still making loud fan noise.
    I'm not a novice for such a installation.
    I sent several e-mails to Caldigit's Online Reseller in the USA, But they reject the refund.
    They said that it is a special order, so it cannot be returned for an exchange for other parts.
    But, They don't let me know about a special order before buying the Raid Card.
    Also, They said that the product is not damaged nor broken, You just have to make sure it is installed properly. If you decide to return the item, there will be a restocking fee charge.
    Really, I can't get refund from the Reseller?
    Is it all is my fault?
    Here is Asia, I can't go there.
    Please give me some advice.
    Thank you for reading.
    p.s. I'm sorry for my poor englsih and this inconvenience post..

    My suggestion is contact CalDigit directly. That is a very new product, not many users will have enough experience to assist you. CalDigit has a good support staff and they will help you out. http://www.CalDigit.com/contact.asp
    Rick
    macgurus.com

  • Raid card problem, migration from Caldigit to.... What else?

    Hey,
    So long story short apple has decided to crew my 2008 mac pro for a new 2009! Which is pretty awesome, except for one small (big) problem. I have a 4 drive raid 5 array off of the Caldigit raid card... however the new system does not have an ipass cable, correct? Meaning I can't connect my raid card..
    So here's my problem, I already dropped a bunch of money on this raid card, but I really need a raid 5 array for what I do, any suggestions?

    So here's my problem, I already dropped a bunch of money on this raid card, but I really need a raid 5 array for what I do, any suggestions?
    Hi,
    I would recommend the HighPoint RocketRAID 4322, SeriTek/2eEN4 4-bay, hot swap enclosures and mini-SAS to eSATA cables. You can read more about this configuration here:
    http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro-2009/
    http://www.amug.org/amug-web/html/amug/reviews/articles/highpoint/4322/
    http://www.amug.org/amug-web/html/amug/reviews/articles/firmtek/2eEN4/
    http://firmtek.stores.yahoo.net/sata2een4.html
    http://www.amazon.com/exec/obidos/ASIN/B000JQ51CM/arizomacinusergr
    This external SATA solution supports RAID 5/6 and provides easy access to the hard disks. I like the external option best as it leaves the internal bays for boot camp, boot drives and backing up or importing data.
    If you require an internal solution, and do not mind the limitations that come with it you may want to explore the new MaxUpgrades "SAS/SATA Backplane Attachment."
    http://www.maxupgrades.com/istore/index.cfm?fuseaction=product.display&product_i d=189
    http://www.barefeats.com/hard120.html
    Happy hunting!

  • Viewing Bay 1 with CalDigit Raid Card

    Hi all - I recently bought a Caldigit RAID card and 3 1 TB Hitachi HDs. I currently have 1 750 HD that has my OS and applications that I want to keep it so I can boot from that HD in Bay 1. As part of the install process of the Caldigit RAID card, I disconnected the iPass cable and connected it directly to the Caldigit RAID card. So I've installed the RAID card and the 3x 1 TB HDs into Bays 2-4 respectively. I've launched the RAID Shield Utility and have a RAID5 striped across the 3 HDs (for a total of 1.87 TB).
    My problem is that the MacPro no longer "sees" Bay1 and can't boot. I literally had to take my 750 Seagate HD (w/ my OS and applications) and put that into an external enclosure and "option-key" boot from the external. This is not really ideal for me.
    I'd like to see if you have any thoughts on how I can put the 750 GB HD back into Bay 1 but have my MacPro be able to see and boot from it. Any thoughts would be greatly appreciated. Although I will hopefully appreciate the scalability of this RAID card - it's a bit more pain right now than it's worth.
    Thanks in advance.

    http://www.caldigit.com/support.asp
    you will need to make sure your software, EFI, driver and firmware are the latest version.
    or contact caldigit support guy for more info.

  • CalDigit RAID-Card Questions

    Hey all,
    I'm going to be upgrading my Mac Pro setup soon, as I'm in desperate need of more high-speed hard drive space. The CalDigit RAID-Card seems like a great product, with expandability in mind, as well as some other great features.
    I'm planning on doing a RAID 5 setup with all four drives (as the CalDigit RAID-Card allows you to make a RAID set bootable). Now, I've been told time and time again to not make your Scratch Drive the same as the System Drive (advice which I've always followed). However, if all four drives were RAID'ed together via RAID 5, and then, two partitions were made (1.0 GB for the system, and 3.0 GBs for the Scratch Disk), does this solve the inherent risks / performance problems associated with making a Scratch Disk the same as the System Boot Drive?
    Does having the System Software on a Bootable Hardware RAID get rid of the risks via RAID'ing via software?
    Or, should I just RAID 5 three of the drives, and leave one for the System all by itself? Obviously, with 4 TBs of drive space, I'm trying to maximize that amount of storage I can get internally. Thanks!

    I believe their RAID card is a software RAID card, & software RAID is definitely not recommended.
    Dear Jon,
    When it comes to striped RAID sets, I have not found a single hardware RAID setup that can out perform a Disk Utility software based RAID configuration. When it comes to RAID 5/6 - Intel IOP based hardware RAID cards provide superior performance. In addition, the Intel IOP hardware design usually dictates that all cards with the same processor will provide RAID 6 performance that is similar regardless of the manufacturer.
    Saying that software RAID is not recommended really is too little information and untrue in many configurations. Hardware RAIDs carry their own problems. When a hardware RAID card fails the user needs a replacement card that is usually more expensive to obtain, requires additional down time and may not be available at all if the company has ended the life of the product.

  • Photoshop/Elements to Revel Photo Migration Problem!

    What happened to my Photoshop/element photos? They were supposedly migrated, but I don't see them! I have no albums in my Revel account.I had a paid subscriiption and it was cancelled back in or around February, and told that the photos would be moved over to REVEL...Can anyone help me to get them back?

    First, thanks Pattie for following up with me. I am going to check my backed up hard drives to see if my photoshop materials are on them. It will take me a few days, as I have only small amounts of time to research it at this time. maybe a break will come in a day or two for a determination.
    Date: Mon, 12 Aug 2013 09:45:52 -0700
    From: [email protected]
    To: [email protected]
    Subject: Photoshop/Elements to Revel Photo Migration Problem!
        Re: Photoshop/Elements to Revel Photo Migration Problem!
        created by Pattie F in Photoshop.com Sharing and Storage - View the full discussion
    Michael-
    Is it possible you logged into Photoshop.com with a different email, or is it possible that you did not set up your Elements to sync with Photosho.com? These are the two main reasons users can not find their files.
    The Photoshop.com account created in 2009 with the email you use to log in to this forum has no files in it, and therefore, nothing migrated to the Revel account with the same login. You do have a Revel account with the same login, but it is also empty since nothing migrated.
    Pattie
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5587690#5587690
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5587690#5587690
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5587690#5587690. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop.com Sharing and Storage by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I have one migration problem.

    Dear All,
    i have one migration problem.
    while doing transfer rules migration i got a popup saying that " GJAHR source filed automatic conversion is not possible "
    what is this message if continue with that what will happens if not what i should do.

    hi vsuree,
    If u r getting this message for field  FISCPER of ur data source,then map Fiscper to 0Fiscyear ,the system wil automatically convert it and the problem will be resolved.  hope it will help u.
    thanks

  • Partial migration problem

    i have decided to move all my data to a raid array in my mac pro while upgrading to Lion (on another disk) but i did not realize that it was possible to move the whole Home Folder to this disk and to just point Lion to the disk to use this as the Home Folder.
    so i have COPIED my Snow Leopard Home Folder to the data disk and i would like to just point Lion to this other Folder.
    http://www.jcsenterprises.com/Japamacs_Page/Blog/00E03B83-1ADA-406E-A940-396D39F 598EA.html
    http://chris.pirillo.com/how-to-move-the-home-folder-in-os-x-and-why/
    HOWEVER, I am realizing that I have already selected the following folders for Lion to MIGRATE from Snow Leopard when we did the install. the idea was that I would copy just the Documents folder to the Data disk but this seems like a really stupid idea in retrospect.
    Selected to automatically migrate during upgrade:
    Applications
    Applications (parallels)
    Desktop
    Dropbox
    can i just point Lion to the new Home Folder location and will it figure out that some of this data is duplicated in the migration or do i somehow need to go in and MANUALLY delete the data we migrated?!
    any ideas?

    Juhi,
    Can you send me the following screenshots at the email id attached to my business card?
    1. Configuraiton of the investment profile used in the internal order
    2. KOB5 screenshot of the internal order in question.
    This will enable me to help you futher.
    To your question on any problem if the rule is deleted. there should not be any problem. Settlement rule changes are pretty standard process which people do. One may have to change a rule or delete it. It poses no threat as such as far as I know.
    Also I would suggest you to simulate the scenario in your QA system. That would give you a lot of insight.
    Best regards,
    Vishal.

  • Catalog Migration Problem from 10g to 11g

    Hi,
    When i am trying to migrate catalog of 10g to 11g. They have some problems
    1. In obiee 10g (under root folder) it shows only around 5 dashboards. But actually when i am seeing in the I catalog manager of obiee 10g it shows 12 dashboards and pages.
    Can some please help me on this how to see the other dashboards and page in obiee 10g ( under root folder ).
    2. When i am trying to migrate the catalog folder in obiee 11g it also shows around 5 dashboards. And other dashboards are not seeing after migration.
    Can someone please help me on this how to see the other dashboards and pages in obiee 11g as well.

    Hi,
    In Webcat, there can be some contents that are inconsistent/invalid. And such contents have 0 byte size. Please check if dashboards files that are not visible and their corresponding .atr files have 0 byte size.
    Other possibility can be dashboards are hidden for the user-id you are using for login.
    Please mark as helpful/correct if this reply helps.
    Thanks,
    Vijay
    Edited by: user5814724 on Apr 8, 2013 4:58 AM

  • CUCM 8.6(2) migration problem with external calls

    Hello all.
    Yesterday we have migrated our telephone infrastructure from CM4.x to CUCM8.6(2), after some weeks of tests.
    Yesterday night all seems to work properly, all phone updated and registered, external calls going out and in.
    But from this morning, with all users at work, it appears a strange problem, that until now I couldn't solve: randomly all external calls go down.
    I can't address this problem, since gateways (all cisco 2811 routers) are the same and with same configuration as yesterday.
    All thing that I can think is that router that seems to cause the problem is configured not with mgcp by cucm, but with h323 route inside the router.
    Any suggestions will be greatly appreciated.
    Daniele

    GW says normal call clearing.
    But, maybe I've addressed the problem.
    I've found a bug fixed into latest cucm release (8.6(2a)SU1) that say "h.323 calls improperly disconnected".
    So I'm trying to upgrade from 8.6(2a) to 8.6(2a)SU1, but process fails :-(
    I've tried from a dvd and also loading iso image from sftp, but after few minutes appears an error
    08/04/2012 09:43:55 upgrade_install.sh|Started auditd...|
    08/04/2012 09:43:56 upgrade_install.sh|Started setroubleshoot...|
    08/04/2012 09:43:56 upgrade_install.sh|Changed selinux mode to enforcing|
    08/04/2012 09:43:56 upgrade_install.sh|Cleaning up rpm_archive...|
    08/04/2012 09:43:56 upgrade_install.sh|Removing /common/rpm-archive/8.6.2.21900-5|
    08/04/2012 09:43:56 upgrade_install.sh|File:/usr/local/bin/base_scripts/upgrade_install.sh:599, Function: main(), Upgrade Failed -- (1)|
    08/04/2012 09:43:56 upgrade_install.sh|set_upgrade_result: set to 1|
    08/04/2012 09:43:56 upgrade_install.sh|is_upgrade_lock_available: Upgrade lock is not available.|
    08/04/2012 09:43:56 upgrade_install.sh|is_upgrade_in_progress: Already locked by this process (pid: 1286).|
    08/04/2012 09:43:56 upgrade_install.sh|release_upgrade_lock: Releasing lock (pid: 1286)|
    I've rebooted server yet and problem remains.
    Thanks for any other suggestions.
    Daniele

  • ASA Migration Problems

    Hi,
    I'm trying to migrate a configuration of an ASA 5520(Version: ASA 8.0(5)) to an ASA 5585 (Version: 8.4(2)). I keep getting some errors which are included below. I've been struggling with these for some copule of weeks and read the documentation on cisco.com (
    http://www.cisco.com/en/US/docs/security/asa/asa83/upgrading/migrating.html) and also some pages on this forum. Some lines are written in bold of which I wasn't able to find any information about. Any help is appreciated. Thanks.
    INFO: MIGRATION - Saving the startup errors to file 'flash:upgrade_startup_errors_201203062349.log'
    Reading from flash...
    !!!!!!!!!!!!!!!!!!!WARNING:
    MIGRATION: NAT Exempt command is encountered in config.
    Static NATs which overlap with NAT Exempt source are not migrated.
    Please check migrated ACLs for accuracy.
    WARNING: MIGRATION: Failed to create acl element to track during migration
    *** Output from config line 1291, "access-group outside_acc..."
    WARNING:
    MIGRATION: NAT Exempt command is encountered in config.
    Static NATs which overlap with NAT Exempt source are not migrated.
    Please check migrated ACLs for accuracy.
    *** Output from config line 1292, "access-group inside_acce..."
    WARNING:
    MIGRATION: NAT Exempt command is encountered in config.
    Static NATs which overlap with NAT Exempt source are not migrated.
    Please check migrated ACLs for accuracy.
    *** Output from config line 1293, "access-group DMZ_access_..."
    WARNING: MIGRATION: During migration of access-list <XXXXXXX> expanded
    this object-group ACE
        permit object-group DM_INLINE_SERVICE_5 XXX 255.255.255.0 DMZnet 255.255.255.0
    WARNING: MIGRATION: Failed to create acl element to track during migration
    *** Output from config line 1298, "access-group XXXXX..."
    ERROR: MIGRATION: No memory to create migrated service-policy element
    ERROR: Problem with interface 2
    ERROR: MIGRATION: No memory to create migrated service-policy element
    ERROR: Problem with interface 3
    ERROR: MIGRATION: No memory to create migrated service-policy element
    ERROR: Problem with interface 4
    ERROR: MIGRATION: No memory to create migrated service-policy element
    ERROR: Problem with interface 5
    ERROR: MIGRATION: No memory to create migrated service-policy element
    ERROR: Problem with interface 6
    ERROR: MIGRATION: No memory to create migrated service-policy element
    ERROR: Problem with interface 7
    ERROR: MIGRATION: No memory to create migrated service-policy element
    ERROR: Problem with interface 8
    ERROR: MIGRATION: No memory to create migrated service-policy element
    ERROR: Problem with interface 9
    ERROR: MIGRATION: No memory to create migrated service-policy element
    ERROR: Problem with interface 10
    ERROR: MIGRATION: No memory to create migrated service-policy element
    ERROR: Problem with interface 11
    *** Output from config line 1797, "service-policy global-po..."
    NAT migration logs:
    The following 'nat' command didn't have a matching 'global' rule on interface 'dmz' and was not migrated.
    nat (inside) 1 access-list inside_nat_outbound
    WARNING: The following identity NAT was not migrated. If required, an appropriate bypass NAT rule needs to be added.
    global (outside) 10 interface
    nat (inside) 0 logserver 255.255.255.255
    WARNING: The following identity NAT was not migrated. If required, an appropriate bypass NAT rule needs to be added.
    nat (inside) 0 logserver 255.255.255.255
    The following 'nat' command didn't have a matching 'global' rule on interface 'dmz' and was not migrated.
    nat (inside) 1 icnetwork 255.255.0.0
    ERROR: MIGRATION: No memory to create migrated service-policy element
    The following 'nat' command didn't have a matching 'global' rule on interface 'TAV' and was not migrated.
    nat (dmz) 1 access-list dmz_nat_outbound
    INFO: NAT migration completed.
    ERROR: an object-group with the same name (egitim) exist.
    WARNING: Failed to create an object for name 'egitim' in the following ACL:
    access-list DMZ_access_in extended permit tcp host 9.1.1.90 object-group egitim any

    Ummm,
    Did you possibly try the default username/password combination? (cisco/cisco) It should then prompt you to change these settings once you gain access. I'm not familiar with how the migration works, if it transitions the user accounts over or you end up starting from scratch. Give that a try and hopefully it gets you into your new system.

  • Migration problem, Jdev 11.1.1.4.0 to Jdev 11.1.2.3.0

    Hi,
    I need Help, I've tried to migrate my aplication developed in Jdev 11.1.1.4.0 to Jdev 11.1.2.3.0, when deploy the application to Integrated weblogic Server 10.3.5 getting te next error:
    ------------------------------------------------------------------------------------------- Integrated Weblogic (10.3.5) Console Trace ------------------------------------------------------------------------------------------------------------------------------
    <JpsDstCredential> <setCredential> No se puede migrar la carpeta/clave de credenciales pagos.pag/anonymous#pag. Motivo oracle.security.jps.service.credstore.CredentialAlreadyExistsException: JPS-01007: Ya existe la credencial con la asignación pagos.pag y la clave anonymous#pag..
    <ConfigureListener> <contextInitialized> Critical error during deployment:
    com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! javax.faces.el.VariableResolver
         at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:357)
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:226)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: java.lang.ClassNotFoundException: javax.faces.el.VariableResolver
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClassCond(ClassLoader.java:630)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:614)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
         at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:343)
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:302)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:43)
         at com.sun.faces.util.Util.loadClass(Util.java:303)
         at com.sun.faces.config.processor.AbstractConfigProcessor.loadClass(AbstractConfigProcessor.java:311)
         at com.sun.faces.config.processor.AbstractConfigProcessor.createInstance(AbstractConfigProcessor.java:240)
         at com.sun.faces.config.processor.ApplicationConfigProcessor.addVariableResolver(ApplicationConfigProcessor.java:641)
         at com.sun.faces.config.processor.ApplicationConfigProcessor.process(ApplicationConfigProcessor.java:306)
         at com.sun.faces.config.processor.AbstractConfigProcessor.invokeNext(AbstractConfigProcessor.java:114)
         at com.sun.faces.config.processor.LifecycleConfigProcessor.process(LifecycleConfigProcessor.java:116)
         at com.sun.faces.config.processor.AbstractConfigProcessor.invokeNext(AbstractConfigProcessor.java:114)
         at com.sun.faces.config.processor.FactoryConfigProcessor.process(FactoryConfigProcessor.java:216)
         at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:338)
         ... 38 more
    <31-10-2012 05:52:21 PM BOT> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.RuntimeException: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! javax.faces.el.VariableResolver.
    java.lang.RuntimeException: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! javax.faces.el.VariableResolver
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:293)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
         Truncated. see log file for complete stacktrace
    Caused By: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! javax.faces.el.VariableResolver
         at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:357)
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:226)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: javax.faces.el.VariableResolver
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
         Truncated. see log file for complete stacktrace
    >
    <FactoryFinder$FactoryManager> <getFactory> La aplicación no se ha inicializado correctamente durante el inicio, no se encuentra la fábrica: javax.faces.application.ApplicationFactory
    <ConfigureListener> <contextDestroyed> Unexpected exception when attempting to tear down the Mojarra runtime
    java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key severe.no_factory_backup_failed
         at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
         at java.util.ResourceBundle.getObject(ResourceBundle.java:371)
         at java.util.ResourceBundle.getString(ResourceBundle.java:334)
         at javax.faces.FactoryFinder$FactoryManager.getFactory(FactoryFinder.java:994)
         at javax.faces.FactoryFinder.getFactory(FactoryFinder.java:331)
         at com.sun.faces.config.InitFacesContext.getApplication(InitFacesContext.java:131)
         at com.sun.faces.config.ConfigureListener.contextDestroyed(ConfigureListener.java:329)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:482)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.EventsManager.notifyContextDestroyedEvent(EventsManager.java:200)
         at weblogic.servlet.internal.WebAppServletContext.destroy(WebAppServletContext.java:3224)
         at weblogic.servlet.internal.ServletContextManager.destroyContext(ServletContextManager.java:247)
         at weblogic.servlet.internal.HttpServer.unloadWebApp(HttpServer.java:461)
         at weblogic.servlet.internal.WebAppModule.destroyContexts(WebAppModule.java:1535)
         at weblogic.servlet.internal.WebAppModule.deactivate(WebAppModule.java:507)
         at weblogic.application.internal.flow.ModuleStateDriver$2.previous(ModuleStateDriver.java:387)
         at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:223)
         at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:215)
         at weblogic.application.internal.flow.ModuleStateDriver.deactivate(ModuleStateDriver.java:141)
         at weblogic.application.internal.flow.ScopedModuleDriver.deactivate(ScopedModuleDriver.java:206)
         at weblogic.application.internal.flow.ModuleListenerInvoker.deactivate(ModuleListenerInvoker.java:261)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$2.previous(DeploymentCallbackFlow.java:547)
         at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:223)
         at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:215)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.deactivate(DeploymentCallbackFlow.java:192)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.deactivate(DeploymentCallbackFlow.java:184)
         at weblogic.application.internal.BaseDeployment$2.previous(BaseDeployment.java:642)
         at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:223)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:63)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    <31-10-2012 05:52:21 PM BOT> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1351720337132' for task '4'. Error is: 'weblogic.application.ModuleException: '
    weblogic.application.ModuleException:
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: javax.faces.el.VariableResolver
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
         Truncated. see log file for complete stacktrace
    >
    <31-10-2012 05:52:21 PM BOT> <Error> <Deployer> <BEA-149202> <Encountered an exception while attempting to commit the 1 task for the application 'pagos_application1'.>
    <31-10-2012 05:52:21 PM BOT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'pagos_application1'.>
    <31-10-2012 05:52:21 PM BOT> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    weblogic.application.ModuleException:
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: javax.faces.el.VariableResolver
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
         Truncated. see log file for complete stacktrace
    >
    I've migrated other applications and not has this problem.
    I've migrated the application using wizard Jdev 11.1.2.3.0 and the deployment failed
    --------------------------------------------Deploy trace--------------------------------------------
    [05:52:08 PM] Deploying 3 profiles...
    [05:52:08 PM] Wrote Web Application Module to C:\JDeveloper\mywork\repositorios\migracion\pagos\ViewController\deploy\sigef_pagos.war
    [05:52:16 PM] Wrote Archive Module to C:\JDeveloper\mywork\repositorios\migracion\pagos\Model\deploy\pagos_Model_adflibPagos1.jar
    [05:52:16 PM] Wrote Enterprise Application Module to C:\JDeveloper\mywork\repositorios\migracion\pagos\deploy\sigef_pagos.ear
    [05:52:16 PM] Redeploying Application...
    [05:52:20 PM] [Deployer:149192]Operation 'deploy' on application 'pagos_application1' is in progress on 'DefaultServer'
    [05:52:21 PM] [Deployer:149193]Operation 'deploy' on application 'pagos_application1' has failed on 'DefaultServer'
    [05:52:21 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application pagos_application1 on DefaultServer.: .
    [05:52:21 PM] Weblogic Server Exception: weblogic.application.ModuleException:
    [05:52:21 PM] Caused by: java.lang.ClassNotFoundException: javax.faces.el.VariableResolver
    [05:52:21 PM] See server logs or server console for more details.
    [05:52:21 PM] weblogic.application.ModuleException:
    [05:52:21 PM] Deployment cancelled.
    [05:52:21 PM] ---- Deployment incomplete ----.
    [05:52:21 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
    I hope you can help me, thanks.
    Ron

    Hi timo,
    reviewing all my application code, I don't found a class that use javax.faces.el.VariableResolver, the JSFUtils.java class that I Use is:
    -------------------------------------------------------------------------------------------- JSFUtils.java ---------------------------------------------------------------------------------------------
    import java.util.Iterator;
    import java.util.Locale;
    import java.util.Map;
    import java.util.MissingResourceException;
    import java.util.ResourceBundle;
    import javax.el.ELContext;
    import javax.el.ExpressionFactory;
    import javax.el.MethodExpression;
    import javax.el.ValueExpression;
    import javax.faces.application.Application;
    import javax.faces.application.FacesMessage;
    import javax.faces.component.UIComponent;
    import javax.faces.component.UIViewRoot;
    import javax.faces.context.ExternalContext;
    import javax.faces.context.FacesContext;
    import javax.servlet.http.HttpServletRequest;
    * General useful static utilies for workign with JSF.
    * @author Duncan Mills
    * @author Steve Muench
    * $Id: JSFUtils.java,v 1.3 2008/01/15 19:12:08 dholk Exp $
    public class JSFUtils {
    private static final String NO_RESOURCE_FOUND = "Missing resource: ";
    * Method for taking a reference to a JSF binding expression and returning
    * the matching object (or creating it).
    * @param expression EL expression
    * @return Managed object
    public static Object resolveExpression(String expression) {
    FacesContext facesContext = getFacesContext();
    Application app = facesContext.getApplication();
    ExpressionFactory elFactory = app.getExpressionFactory();
    ELContext elContext = facesContext.getELContext();
    ValueExpression valueExp =
    elFactory.createValueExpression(elContext, expression,
    Object.class);
    return valueExp.getValue(elContext);
    public static String resolveRemoteUser() {
    FacesContext facesContext = getFacesContext();
    ExternalContext ectx = facesContext.getExternalContext();
    return ectx.getRemoteUser();
    public static String resolveUserPrincipal() {
    FacesContext facesContext = getFacesContext();
    ExternalContext ectx = facesContext.getExternalContext();
    HttpServletRequest request = (HttpServletRequest)ectx.getRequest();
    return request.getUserPrincipal().getName();
    I don't know why get the error "Caused by: java.lang.ClassNotFoundException: javax.faces.el.VariableResolver" when I not used this class in the application. Maybe this class could be hidden in other file ??
    my web.xml file is the next:
    --------------------------------------------------------------- web.xml -----------------------------------------------------------------------------------------------
    <?xml version = '1.0' encoding = 'windows-1252'?>
    <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
    version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
    <context-param>
    <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
    <param-value>client</param-value>
    </context-param>
    <context-param>
    <description>If this parameter is true, there will be an automatic check
    of the modification date of your JSPs, and saved state will
    be discarded when JSP's change. It will also automatically
    check if your skinning css files have changed without you
    having to restart the server. This makes development easier,
    but adds overhead. For this reason this parameter should be
    set to false when your application is deployed.</description>
    <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
    <param-value>false</param-value>
    </context-param>
    <context-param>
    <description>Whether the 'Generated by...' comment at the bottom of ADF
    Faces HTML pages should contain version number information.</description>
    <param-name>oracle.adf.view.rich.versionString.HIDDEN</param-name>
    <param-value>false</param-value>
    </context-param>
    <context-param>
    <param-name>javax.faces.PARTIAL_STATE_SAVING</param-name>
    <param-value>false</param-value>
    </context-param>
    <context-param>
    <description>Security precaution to prevent clickjacking: bust frames if the ancestor window domain(protocol, host, and port) and the frame domain are different. Another options for this parameter are always and never.</description>
    <param-name>oracle.adf.view.rich.security.FRAME_BUSTING</param-name>
    <param-value>differentDomain</param-value>
    </context-param>
    <filter>
    <filter-name>ACF</filter-name>
    <filter-class>oracle.adf.view.rich.webapp.AdfFacesCachingFilter</filter-class>
    </filter>
    <filter>
    <filter-name>JpsFilter</filter-name>
    <filter-class>oracle.security.jps.ee.http.JpsFilter</filter-class>
    <init-param>
    <param-name>enable.anonymous</param-name>
    <param-value>true</param-value>
    </init-param>
    </filter>
    <filter-mapping>
    <filter-name>JpsFilter</filter-name>
    <url-pattern>/*</url-pattern>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
    <dispatcher>INCLUDE</dispatcher>
    </filter-mapping>
    <filter-mapping>
    <filter-name>ACF</filter-name>
    <url-pattern>*</url-pattern>
    </filter-mapping>
    <filter>
    <filter-name>SessionFilter</filter-name>
    <filter-class>arq.session.SessionFilter</filter-class>
    </filter>
    <filter>
    <description>Filtro de Seguridad</description>
    <display-name>Filtro de Seguridad</display-name>
    <filter-name>FiltroSeguridad</filter-name>
    <filter-class>seg.filtro.FiltroSeguridad</filter-class>
    </filter>
    <filter>
    <filter-name>trinidad</filter-name>
    <filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
    </filter>
    <filter>
    <filter-name>ADFLibraryFilter</filter-name>
    <filter-class>oracle.adf.library.webapp.LibraryFilter</filter-class>
    </filter>
    <filter>
    <filter-name>adfBindings</filter-name>
    <filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
    </filter>
    <filter-mapping>
    <filter-name>SessionFilter</filter-name>
    <url-pattern>/*</url-pattern>
    <dispatcher>REQUEST</dispatcher>
    </filter-mapping>
    <filter-mapping>
    <filter-name>FiltroSeguridad</filter-name>
    <url-pattern>/faces/*</url-pattern>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
    </filter-mapping>
    <filter-mapping>
    <filter-name>trinidad</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
    </filter-mapping>
    <filter-mapping>
    <filter-name>ADFLibraryFilter</filter-name>
    <url-pattern>/*</url-pattern>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
    </filter-mapping>
    <filter-mapping>
    <filter-name>adfBindings</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
    </filter-mapping>
    <listener>
    <listener-class>arq.session.SessionListener</listener-class>
    </listener>
    <listener>
    <listener-class>oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack</listener-class>
    </listener>
    <listener>
    <listener-class>oracle.adf.mbean.share.connection.ADFConnectionLifeCycleCallBack</listener-class>
    </listener>
    <listener>
    <listener-class>oracle.adf.mbean.share.config.ADFConfigLifeCycleCallBack</listener-class>
    </listener>
    <servlet>
    <servlet-name>Faces Servlet</servlet-name>
    <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>resources</servlet-name>
    <servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
    </servlet>
    <servlet>
    <servlet-name>BIGRAPHSERVLET</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.graph.GraphServlet</servlet-class>
    </servlet>
    <servlet>
    <servlet-name>BIGAUGESERVLET</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.gauge.GaugeServlet</servlet-class>
    </servlet>
    <servlet>
    <servlet-name>MapProxyServlet</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.geoMap.servlet.MapProxyServlet</servlet-class>
    </servlet>
    <servlet>
    <servlet-name>GatewayServlet</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.graph.FlashBridgeServlet</servlet-class>
    </servlet>
    <servlet>
    <servlet-name>adflibResources</servlet-name>
    <servlet-class>oracle.adf.library.webapp.ResourceServlet</servlet-class>
    </servlet>
    <servlet>
    <servlet-name>ServletImgCheque</servlet-name>
    <servlet-class>arq.reportes.ServletImgCheque</servlet-class>
    </servlet>
    <servlet>
    <servlet-name>ServletDisenyoCheque</servlet-name>
    <servlet-class>arq.servlet.ServletDisenyoCheque</servlet-class>
    </servlet>
    <servlet>
    <servlet-name>ServletImpresionCheque</servlet-name>
    <servlet-class>arq.servlet.ServletImpresionCheque</servlet-class>
    </servlet>
    <servlet-mapping>
    <servlet-name>Faces Servlet</servlet-name>
    <url-pattern>/faces/*</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/adf/*</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/afr/*</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>BIGRAPHSERVLET</servlet-name>
    <url-pattern>/servlet/GraphServlet/*</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>BIGAUGESERVLET</servlet-name>
    <url-pattern>/servlet/GaugeServlet/*</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>MapProxyServlet</servlet-name>
    <url-pattern>/mapproxy/*</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/bi/*</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>GatewayServlet</servlet-name>
    <url-pattern>/flashbridge/*</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>adflibResources</servlet-name>
    <url-pattern>/adflib/*</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>ServletImgCheque</servlet-name>
    <url-pattern>/servletimgcheque</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>ServletDisenyoCheque</servlet-name>
    <url-pattern>/servletdisenyocheque</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>ServletImpresionCheque</servlet-name>
    <url-pattern>/servletimpresioncheque</url-pattern>
    </servlet-mapping>
    <mime-mapping>
    <extension>swf</extension>
    <mime-type>application/x-shockwave-flash</mime-type>
    </mime-mapping>
    <welcome-file-list>
    <welcome-file>/ingreso.jspx</welcome-file>
    </welcome-file-list>
    <jsp-config>
    <jsp-property-group>
    <url-pattern>*.jsff</url-pattern>
    <is-xml>true</is-xml>
    </jsp-property-group>
    </jsp-config>
    </web-app>
    Application need that work in a production enviroment, but I can't yet deployed in my Integrated weblogic.
    thanks for your time and help.

  • Raid 0 problem 890gxm-G65

    Hello, I've been trying things with my pc for hours but I still don't know what is going wrong.
    -I've 2 identical hdd's in sata slots
    -I didn't get any option to ctrl + f, so i downloaded: (32 bit) ATI SB7xx/SB8xx RAID Driver from msi
    -I put the drivers on my USB stick, booted from it and it installed?? (to where?) a program: raid option rom version 3.2.1540.6 (i downloaded the 32 bit version... my guess now that my usb flashed the bios for raid drivers? but I flashed the wrong bit version, I want to use 64 bit. though it seems strange to me that drivers in Bios are 32 / 64 bit related? since bios flash downloads aren't.)
    -I put the 64 bit ATI SB7xx/SB8xx RAID Driver on my USB stick to see if it installed automatically, to bad... it didn't it says (find another boot device or something like that)
    -I made an LD works all fine, it says Functional 1.999 TB or something.
    -Booting windows installation, can't find the logical drive array, I think: ''no problem I have the drivers.''
    -Installed the driver (load driver option) that came with ATI SB7xx/SB8xx RAID Driver [AMD AHCI Compatible RAID Controller (D:\ahcix64s.inf) (x64), but still no recognition.
    Is all this going wrong due to a wrong bios update? Or whatever I did with the 32 bit?? Driver software that made the raid array?
    My option in the bios AHCI/RAID/IDE = Raid
    Raid chip = enabled
    While losing my mind hehe, I thought the software should be stored in the bios, with formatted harddisks where else could they be? So I
    -flashed the bios to version 1.9 with a fat32 flash function in the bios (n-flash i think)
    but I still have that stupid ''raid option rom version 3.2.1540.6'' (32 bit download) Which I expect is the problem here, but I'm raid noob lol.
    -Windows does recognize my harddrives when I do IDE instead of RAID in bios.
    Questions: Why doesn't Windows 7 recognize my raid array after installing 64 bit raid drivers? Is it due to wrong bios software [raid option rom version 3.2.1540.6]? How can I fix this?
    I'm totally lost please help me...
    Greetings,
    Sten

    Quote from: Sabbath on 20-July-11, 23:41:24
    Ok,
    So if the 64bit driver I linked is seen during your windows install and at that time correctly accepted, as w7 continues its install till its complete, I don't understand why there is a 32 bit pop up.
    That is why I suggested starting over being you did install at some point a 32 bit driver.
    Does your msi resource CD have a raid driver on it?
    When I did my msi raid, I installed my raid driver from msi's site during install and after I was in windows I needed to complete it by installing a raid driver off the CD.
    This removed all yellow flags in device manager concerning my raid.
    It is accepted, i suppose it's complete. But the 64 bit driver installs 4 times quicker than the 32 bit version. So maybe W7 doesn't install the 64 bit driver good enough? I can't install w7 at all since it can't find any harddrives to install on. I would like to start over, but I don't know how to delete the 32 bit driver... Formatting harddrives doesn't delete the driver, and bringing bios settings to default neither. I flashed the bios to 1.9 which didn't help aswell. If I mark the button  ''shows only hardware compatible drivers'' my original msi cd doesn't give any drivers. Though there are drivers on it, but they aren't compatible... Should I flash my bios back to 1.0? Hopefully it will delete all its extra features like raid array. And then I install it with the correct 64 bit driver. But it seems weird that the problem is there... Since it seems logical to me that the bios doesn't work on 32bit / 64 bit programms.
    Are there risks concerning flashing the bios back to version 1.0? Would it help? I would like to know where the driver is located... where does it get installed? Did I accidently indeed flashed my bios by booting with the driver usb, how can it be deleteD? And is that the problem? Meh! Thanks for your help Sabbath, appreciated ^^ Isn't there a moderator or technician from MSI on these forums that can help me?

  • ADF/Swing/JClient application migration problem from 10.1.3.5 to 11.1.1.3

    Hi,
    I am migrating an application from JDev 10.1.3.5 to 11.1.1.3 in order to deploy it to a java 1.6 JVM which is only certified with JDev 11.1.1.3
    No matter what I do the DataBindings.cpx file content is emptied by the IDE, the migration was successful => no errors displayed.
    I tried to solve the problem by doing the following but the file stays empty:
    1) the removing the project from the application and adding it again, migration is done again => FILE EMPTY
    2) adding manually the content in the source file then running XML validation => no errors, I close the file, reopen it and EMPTY AGAIN!
    Your is needed and will be appreciated!
    Thanks
    Fred
    Content of file DataBindings.cpx:
    <?xml version='1.0' encoding='UTF-8' ?>
    <Application xmlns="http://xmlns.oracle.com/adfm/application" id="DataBindings"
    Package="" version="10.1.2.18.73" SeparateXMLFiles="false"
    ClientType="JClient">
    <pageMap/>
    <pageDefinitionUsages>
    <page id="PanelWeventEditParamVO1UIModel"
    path="com.xxx.view.web.PanelWeventEditParamVO1UIModel"/>
    <page id="TogglePanelPrintSizeDpiUIModel"
    path="com.xxx.view.lab.TogglePanelPrintSizeDpiUIModel"/>
    <page id="PanelPhotographerLabROfPhotolabVO1UIModel"
    path="com.xxx.view.web.PanelPhotographerLabROfPhotolabVO1UIModel"/>
    <page id="PanelWeventEditStatusVO1UIModel"
    path="com.xxx.view.web.PanelWeventEditStatusVO1UIModel"/>
    <page id="MDDPhotographerGalleryWelcomeUIModel"
    path="com.xxx.view.web.MDDPhotographerGalleryWelcomeUIModel"/>
    <page id="PanelTranslationCountryRegionLangTableVO1UIModel"
    path="com.xxx.view.system.PanelTranslationCountryRegionLangTableVO1UIModel"/>
    <page id="PanelDestGroupDestRTableVO1UIModel"
    path="com.xxx.view.system.PanelDestGroupDestRTableVO1UIModel"/>
    <page id="PanelWeventEditPackageVO1UIModel"
    path="com.xxx.view.web.PanelWeventEditPackageVO1UIModel"/>
    <page id="PanelSiteTariffPaymentTableVO1UIModel"
    path="com.xxx.view.system.PanelSiteTariffPaymentTableVO1UIModel"/>
    <page id="PanelPhotolabClobFreePage1L1VO1UIModel"
    path="com.xxx.view.web.PanelPhotolabClobFreePage1L1VO1UIModel"/>
    <page id="PhotoWebshopDesktopUIModel"
    path="com.xxx.view.start.PhotoWebshopDesktopUIModel"/>
    <page id="PanelItemGiftKitItemGiftTableVO1UIModel"
    path="com.xxx.view.lab.PanelItemGiftKitItemGiftTableVO1UIModel"/>
    <page id="TabbedFormUIModel"
    path="com.xxx.view.system.TabbedFormUIModel"/>
    <page id="PanelEntityPhotolabVO1UIModel"
    path="com.xxx.view.system.PanelEntityPhotolabVO1UIModel"/>
    <page id="PanelAddressVO1UIModel"
    path="com.xxx.view.web.PanelAddressVO1UIModel"/>
    <page id="SiteEventTypesAndTariffsFormUIModel"
    path="com.xxx.view.start.SiteEventTypesAndTariffsFormUIModel"/>
    <page id="PanelSiteVO1UIModel"
    path="com.xxx.view.system.PanelSiteVO1UIModel"/>
    <page id="PanelSiteBonusTypeVO1UIModel"
    path="com.xxx.view.system.PanelSiteBonusTypeVO1UIModel"/>
    <page id="PanelWeventAccountFileUploaderUIModel"
    path="com.xxx.view.web.PanelWeventAccountFileUploaderUIModel"/>
    <page id="PanelLabelWhereVO1UIModel"
    path="com.xxx.view.system.PanelLabelWhereVO1UIModel"/>
    <page id="PanelLabelWhatVO1UIModel"
    path="com.xxx.view.system.PanelLabelWhatVO1UIModel"/>
    <page id="PanelLabelWhoVO1UIModel"
    path="com.xxx.view.system.PanelLabelWhoVO1UIModel"/>
    </pageDefinitionUsages>
    <dataControlUsages>
    <BC4JDataControl Configuration="BaseTablesAMLocal"
    Package="com.xxx.model.system"
    xmlns="http://xmlns.oracle.com/adfm/datacontrol"
    id="BaseTablesAMDataControl"
    FactoryClass="oracle.adf.model.bc4j.DataControlFactoryImpl"
    syncMode="Immediate">
    <Parameters>
    <Parameter name="FactoryClass"
    value="oracle.adf.model.bc4j.DataControlFactoryImpl"/>
    <Parameter name="SupportsFindMode" value="true"/>
    <Parameter name="Configuration" value="BaseTablesAMLocal"/>
    <Parameter name="SupportsTransactions" value="true"/>
    <Parameter name="Package" value="com.xxx.model.system"/>
    <Parameter name="SubType" value="DCBC4J"/>
    <Parameter name="Name" value="BaseTablesAMDataControl"/>
    <Parameter name="id" value="BaseTablesAMDataControl"/>
    </Parameters>
    </BC4JDataControl>
    <BC4JDataControl Configuration="SiteTablesAMLocal"
    Package="com.xxx.model.system"
    xmlns="http://xmlns.oracle.com/adfm/datacontrol"
    id="SiteTablesAMDataControl"
    FactoryClass="oracle.adf.model.bc4j.DataControlFactoryImpl"
    syncMode="Immediate">
    <Parameters>
    <Parameter name="FactoryClass"
    value="oracle.adf.model.bc4j.DataControlFactoryImpl"/>
    <Parameter name="SupportsFindMode" value="true"/>
    <Parameter name="Configuration" value="SiteTablesAMLocal"/>
    <Parameter name="SupportsTransactions" value="true"/>
    <Parameter name="Package" value="com.xxx.model.system"/>
    <Parameter name="SubType" value="DCBC4J"/>
    <Parameter name="Name" value="SiteTablesAMDataControl"/>
    <Parameter name="id" value="SiteTablesAMDataControl"/>
    </Parameters>
    </BC4JDataControl>
    <BC4JDataControl Configuration="SystemViewAMLocal"
    Package="com.xxx.model.system"
    xmlns="http://xmlns.oracle.com/adfm/datacontrol"
    id="SystemViewAMDataControl"
    FactoryClass="oracle.adf.model.bc4j.DataControlFactoryImpl"
    syncMode="Immediate">
    <Parameters>
    <Parameter name="FactoryClass"
    value="oracle.adf.model.bc4j.DataControlFactoryImpl"/>
    <Parameter name="SupportsFindMode" value="true"/>
    <Parameter name="Configuration" value="SystemViewAMLocal"/>
    <Parameter name="SupportsTransactions" value="true"/>
    <Parameter name="Package" value="com.xxx.model.system"/>
    <Parameter name="SubType" value="DCBC4J"/>
    <Parameter name="Name" value="SystemViewAMDataControl"/>
    <Parameter name="id" value="SystemViewAMDataControl"/>
    </Parameters>
    </BC4JDataControl>
    <BC4JDataControl Configuration="PhotolabSetupAMLocal"
    Package="com.xxx.model.lab"
    xmlns="http://xmlns.oracle.com/adfm/datacontrol"
    id="PhotolabSetupAMDataControl"
    FactoryClass="oracle.adf.model.bc4j.DataControlFactoryImpl"
    syncMode="Immediate">
    <Parameters>
    <Parameter name="FactoryClass"
    value="oracle.adf.model.bc4j.DataControlFactoryImpl"/>
    <Parameter name="Configuration" value="PhotolabSetupAMLocal"/>
    <Parameter name="SupportsFindMode" value="true"/>
    <Parameter name="SupportsTransactions" value="true"/>
    <Parameter name="Name" value="PhotolabSetupAMDataControl"/>
    <Parameter name="SubType" value="DCBC4J"/>
    <Parameter name="Package" value="com.xxx.model.lab"/>
    <Parameter name="id" value="PhotolabSetupAMDataControl"/>
    </Parameters>
    </BC4JDataControl>
    <BC4JDataControl Configuration="PhotolabWebAMLocal"
    Package="com.xxx.model.web"
    xmlns="http://xmlns.oracle.com/adfm/datacontrol"
    id="PhotolabWebAMDataControl"
    FactoryClass="oracle.adf.model.bc4j.DataControlFactoryImpl"
    syncMode="Immediate">
    <Parameters>
    <Parameter name="FactoryClass"
    value="oracle.adf.model.bc4j.DataControlFactoryImpl"/>
    <Parameter name="Configuration" value="PhotolabWebAMLocal"/>
    <Parameter name="SupportsFindMode" value="true"/>
    <Parameter name="SupportsTransactions" value="true"/>
    <Parameter name="Name" value="PhotolabWebAMDataControl"/>
    <Parameter name="SubType" value="DCBC4J"/>
    <Parameter name="Package" value="com.xxx.model.web"/>
    <Parameter name="id" value="PhotolabWebAMDataControl"/>
    </Parameters>
    </BC4JDataControl>
    </dataControlUsages>
    </Application>

    Ok it seems I have resolved my problem see end of thread
    Still have following relevant question for an Oracle team member:
    Why is my <pageMap/> empty in my migrated application cpx file?
    => when I create a new ADF Swing application this tag is not empty:
    in new file:
    <pageMap>
    <page path="view.PanelPhotolabVO1" usageId="view_PanelPhotolabVO1PageDef"/>
    </pageMap>
    <pageDefinitionUsages>
    <page id="view_PanelPhotolabVO1PageDef"
    path="view.pageDefs.PanelPhotolabVO1PageDef"/>
    in migrated file:
    <pageMap/>
    <pageDefinitionUsages>
    <page id="PanelWeventEditParamVO1UIModel"
    path="com.photoswing.view.web.PanelWeventEditParamVO1UIModel"/>
    Solution to empty migrated cpx file:
    It seems the migration utility couldn't cope with the BC4JDataControl definitions, so I edited them manually.
    Example of 10.1.3... syntax:
    <dataControlUsages>
    <BC4JDataControl Configuration="BaseTablesAMLocal"
    Package="com.xxx.model.system"
    xmlns="http://xmlns.oracle.com/adfm/datacontrol"
    id="BaseTablesAMDataControl"
    FactoryClass="oracle.adf.model.bc4j.DataControlFactoryImpl"
    syncMode="Immediate">
    <Parameters>
    <Parameter name="FactoryClass"
    value="oracle.adf.model.bc4j.DataControlFactoryImpl"/>
    <Parameter name="SupportsFindMode" value="true"/>
    <Parameter name="Configuration" value="BaseTablesAMLocal"/>
    <Parameter name="SupportsTransactions" value="true"/>
    <Parameter name="Package" value="com.photoswing.model.system"/>
    <Parameter name="SubType" value="DCBC4J"/>
    <Parameter name="Name" value="BaseTablesAMDataControl"/>
    <Parameter name="id" value="BaseTablesAMDataControl"/>
    </Parameters>
    </BC4JDataControl>
    New syntax:
    <BC4JDataControl id="BaseTablesAMDataControl"
    Package="com.xxx.model.system"
    FactoryClass="oracle.adf.model.bc4j.DataControlFactoryImpl"
    SupportsTransactions="true" SupportsFindMode="true"
    SupportsRangesize="true" SupportsResetState="true"
    SupportsSortCollection="true"
    Configuration="BaseTablesAMLocal" syncMode="Immediate"
    ExceptionMode="Immediate"
    xmlns="http://xmlns.oracle.com/adfm/datacontrol"/>
    Tip:
    Do this editing outside JDev with ide closed to avoid crashing it.
    Regards
    Fred

  • Migration problem from 3.2 to 3.5

    hi,
    I had some problem with migration of an existing application from weblogic personalization
    server 3.2 to weblogic personalization server 3.5.I am not able to migrate the
    ruleset from 3.2 to 3.5.I have followed all the instructions in the migration
    document.So if any of you had encountered the following problem, maybe you could
    help me.
    E:\bea\WebLogicCommerce3.5\bin\win32>dumprules32.bat e:\rules32
    Dumping existing rule sets to e:\rules32
    Processor specific args not satisfied
    Args must be as follows for mode migrate32to35
    <output directory>
    http://apache.org/xml/features/nonvalidating/load-external-dtd
    Usage: java com.bea.commerce.platform.rules.tools.RuleSetProcessorHarness ( migrate32to35
    | dump35 ) [<optional mode args>]
    Any help would be highly appreciated.
    Thanx in advance,
    Subu

    sorry i am posting it again.
    I had created the directory e:\rules32.I had set the environment using the set-environment.bat
    file before running this command.
    I tried running this command directly too.However I am still having the same problem.
    "Daniel Selman" <[email protected]> wrote:
    Subu,
    1. Did you create the e:\rules32 directory first?
    2. Did you try running:
    java com.bea.commerce.platform.rules.tools.RuleSetProcessorHarness
    migrate32to35 e:\rules32
    directly?
    If yes, please post the ruleset that is causing the error.
    Thanks,
    Daniel Selman
    "Subramaniam" <[email protected]> wrote in message
    news:3b17e7ce$[email protected]..
    hi,
    I had some problem with migration of an existing application from weblogicpersonalization
    server 3.2 to weblogic personalization server 3.5.I am not able tomigrate
    the
    ruleset from 3.2 to 3.5.I have followed all the instructions in themigration
    document.So if any of you had encountered the following problem, maybeyou
    could
    help me.
    E:\bea\WebLogicCommerce3.5\bin\win32>dumprules32.bat e:\rules32
    Dumping existing rule sets to e:\rules32
    Processor specific args not satisfied
    Args must be as follows for mode migrate32to35
    <output directory>
    http://apache.org/xml/features/nonvalidating/load-external-dtd
    Usage: java com.bea.commerce.platform.rules.tools.RuleSetProcessorHarness( migrate32to35
    | dump35 ) [<optional mode args>]
    Any help would be highly appreciated.
    Thanx in advance,
    Subu
    [problem.txt]

Maybe you are looking for

  • ATI 5870 card still the best?

    Hi Just about to buy a graphics card update and wonder - is the ATI 5870 still the best one for my early 2008 MAC PRO 3.0, 12GB RAM, Quad-core Intel Xeon - using MOTION 4 and latest FCP? Thanks K

  • Could not sign in via ovi suite (3.1.0.91)

    Hi There, I am not able to login to Nokia accounts  via ovi suite. Seems to be some sort of internet connection/setting issue, although I can browser,etc via same internet connection from my PC perfectly fine. Screenshot is attached... Thank you, Yog

  • Enhancing Virtual Cube 0FIGL_V01

    Hi all,   We want to enhance the cube 0FIGL_C01 to add few additional characteristics. We want to know whether we can genereate Balance sheet reports (in balance sheet format) from 0figl_c01 cube itself or we have to create new or enhance the virtual

  • HELP - Ipod 30gb keeps freezing

    okay, i've reset the darn thing about a million times. all updates have been installed. yet, my ipod keeps freezing. if i am lucky, i get one or two songs to complete before it freezes. i've got about 20gb of music on it now, which i'm guessing is to

  • Photoshop Student and Teacher

    My grandson was given an edition of Photoshop CS6 student and teacher.  We have read the faq's and he has his report card copy but we can not figure how to register the product.  Can anyone tell us how or if he can register this gift?